2530-27-005-3932

4 25 Mar 2013 1015-66-120-4776 Bipod Yoke ADE(A)263-3RNCC: 3 | RNVC: 2 | DAC: A 23 May 1984 2530-27-005-3932

5935-99-464-7130 5935994647130 994647130 is a device specifically designed to fully or partially inclose an electrical connector to protect its mating end from mechanical damage. excludes cap, electrical; cap, protective, dust and moisture seal; and guard, electrical connector. see also cover and guard, electrical connector; shell, electrical connector; and shield, electrical connector.

7125-01-464-7130 7125014647130 014647130 is an item normally constructed of wood or metal which is used for storage purposes. do not use if a more specific name is available.

5315-00-464-7130 5315004647130 004647130

5310-14-464-7130 5310144647130 144647130 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.