2530-14-360-7630

4730-15-189-3503 4730151893503 151893503 CLAMP(60-80)

3120-00-250-9562 3120002509562 002509562 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

GAGE,OIL PRESSURE 99 EA NS Request Quotation Subscribe to View Vendor Details... 6080.
GAGE,OIL PRESSURE 1 EA NS Request Quotation 6080 GAGE,OIL PRESSURE 14 EA NS Request Quotation Subscribe
to View Vendor Details... 6080 GAGE,OIL PRESSURE 16 EA NS Request Quotation Subscribe to View Vendor

5310-34-038-6020 5310340386020 340386020 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.