2530-12-385-0198

33-201-8194 Vehicular Track Roller Assembly 0738096150RNCC: 5 | RNVC: 2 | DAC: 1 28 Oct 2002 2530-12-385-0198

DAC: 3 21 May 2013 4030-12-391-3788 Hoist Hook I006195RNCC: 3 | RNVC: 2 | DAC: 3 8 Mar 2013 2530-12-385-0198

9905-99-721-4166 9905997214166 997214166 is an item which is rigid or semi-rigid, generally flat and smooth designed to be attached to an item and provides data such as name/nomenclature, weight, tire pressure, dimensional data and the like. see also marker,identification; plate,designation; plate,instruction; plate set,identification; and tag,marker. excludes label.

5340-99-463-4994 5340994634994 994634994 is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). it is designed to retain and/or position the items close to a structure. it may be fastened to the structure on one end, both ends, or in the center. see also clamp, loop. excludes bracket, pipe; strap, leather and strap, webbing.

3120-99-732-4256 3120997324256 997324256 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.