2530-12-304-3353

Documents 4720-99-806-7220 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-25/fsc-2530/de 2530-12-304-3353
Disk Brake Shoe Set 2530123043353 123043353 2530-12-304-3353 2530123043353 123043353 is a group

7110-15-160-5787 7110151605787 151605787 POLTRONCINA

4310-25-160-5787 4310251605787 251605787 is a positive displacement compressor designed to compress air or gas from an initial intake pressure to a higher discharge pressure by means of reciprocating piston(s) in cylinder(s). it is designed to be driven by an independent power source, such as an electric motor, gasoline or diesel engine, or the like. it does not include the prime mover, air storage tank, and the like. it may include various peripheral components, such as drive pulley, unloader, and the like.

6130-66-160-5787 6130661605787 661605787 is a component which converts available alternating current or direct current electrical power into a form required to operate another component or set. the item may consist of a combination of an invertor, vibrator; vibrator, interrupter; vibrator, self-rectifying; invertor, power, static; with a transformer and rectifier(s) employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contact(s) of a vibrator, self-rectifying; or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. the item may incorporate a filter, direct current power and provisions for regulation of input and/or output voltage. the item may have special input, output, control or other facilities for applications in specialized environments such as medical, dental or other operations. excludes battery chargers and rotating machinery types of items, such as motor generators and dynamotors.

9540-01-160-5787 9540011605787 011605787 is a structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. letter h section may have a maximum of 5 percent slope on the inside face of the flanges.