2520-00-657-8570

6 1 Jan 1963 5306-00-328-4387 Eyebolt And Nut Ass 10907RNCC: 3 | RNVC: 2 | DAC: X 1 Jan 1963 2520-00-657-8570

4720-00-064-2645 4720000642645 000642645 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

2840-99-657-8570 2840996578570 996578570 is an item conforming to the definition of wiring harness with branches (forks). see also cable assembly, special purpose, electrical, branched, excludes lead assembly, electrical; and lead, test.

4720-00-734-1752 4720007341752 007341752 is a length of nonmetallic hose with fittings on one or both ends. for items without fittings, see hose, nonmetallic. excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

5310-01-657-8570 5310016578570 016578570 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.