2520-15-133-5389

HMIC : | PMIC : | EDC: | ADPEC : 5960-21-427-0737. https//www.nsnlookup.com /fsg-25/fsc-2520/it 2520-15-133-5389
Cilindro Maestro 2520151335389 151335389 valve, graphite impregnated and lubricated items. https
ca 5960-21-427-0737 59602142707372142707375960-21-427-07375960214270737214270737 Restrictions 2520-15-133-5389

Documents 6750-01-427-0737 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-25/fsc-2520/it 2520-15-133-5389
Cilindro Maestro 2520151335389 151335389 Documents 2520-15-133-5389 3+ Documents ( More... ) https

5310-99-427-0737 5310994270737 994270737 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5960-21-427-0737 5960214270737 214270737

5910-00-427-0737 5910004270737 004270737 CAPACITOR,FIXED,CERAMIC DIELECT