2520-12-189-6543

1981 4730-12-181-1203 https//www.nsnlookup.com /cage Wirth Maschinen- Und (CAGE Code C0554) 2520-12-189-6543

Jan 1979 5305-12-177-8862 Hexagon Head Cap Screw 6400003RNCC: 3 | RNVC: 2 | DAC: 1 7 Mar 1979 2520-12-189-6543

5305-14-500-0302 5305145000302 145000302 VIS

5365-01-500-0302 5365015000302 015000302 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

8405-21-500-0302 8405215000302 215000302