2510-01-247-9526

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Vehicular Radiator Grille (INC 36302) 1987 2510-01-247-9526

3020-00-407-4768 3020004074768 004074768 GEAR,IDLER

5365-01-407-4768 5365014074768 014074768 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5970-14-407-4768 5970144074768 144074768 is an insulator that is essentially thin and flat, with one through hole centrally located. the general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. the thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. the thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. excludes items with more than one hole. see also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

1987 2510-01-248-3991 Vehicular Radiator Grille 4074754RNCC: 3 | RNVC: 2 | DAC: E 23 Jan 1987 2510-01-247-9526