2510-14-562-0242

9 3 Oct 2011 2510-22-618-3622 Turret Base Cover 100058RNCC: 3 | RNVC: 2 | DAC: 4 3 Dec 2008 2510-14-562-0242

4330-33-004-3047 4330330043047 330043047 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.

1560-15-004-3047 1560150043047 150043047 is a longitudinal reinforcement in the wing of an aircraft.

4730-27-004-3047 4730270043047 270043047 is a replaceable device designed to remove solid particles from flowing liquids. the removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. it is designed to fit into a strainer, sediment (or similar cavity). it may have a reinforcement to prevent collapsing, distorting or rupturing. the degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. see also filter element, fluid.

5315-19-004-3047 5315190043047 190043047 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.