2510-33-204-6687

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Engine Compartment Hood (INC 60618) 2004 2510-33-204-6687

5310-14-503-7124 5310145037124 145037124 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1270-37-503-7124 1270375037124 375037124 OUTER SUPPORT

5999-00-503-7124 5999005037124 005037124 is an item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. excludes items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. see also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

Jun 2012 2510-27-008-1342 Engine Compartment Hood 25676RNCC: 2 | RNVC: 1 | DAC: 3 16 Apr 2004 2510-33-204-6687