2510-12-358-8247

815-6877 Part NumberManufacturerStatusFV 51561-3 https//www.nsnlookup.com /fsg-25/fsc-2510/de 2510-12-358-8247
Vehicular Structural Frame 2510123588247 threads. https//www.nsnlookup.com /fsg-53/fsc-5365/uk

5305-21-891-6396 5305218916396 218916396 is an externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.

5365-99-815-6877 5365998156877 998156877 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

-12-358-8253 Vehicular Structural Frame Section 413325RNCC: 3 | RNVC: 2 | DAC: 1 19 Nov 2002 2510-12-358-8247

4820-33-116-8580 4820331168580 331168580 is a metallic, needle shaped item having a one-piece stem threaded for securing to, or positioning into, a mating part. the point may be of various angles or shapes, such as conical or tapered, to correspond with the mating seat. the item is designed for the fine control flow or restriction of liquids or gases in a given system. it may be provided with a knurled head for rotation by thumbs and fingers, or be driven with either a wrench, handle, or inserted driver. excludes valve, fuel-air mixture control, automatic.