2510-12-312-4563
Fahrzeuga Formteil
2510123124563 123124563 1 60 259 160259
Managed by Germany
NSN Created on 8 Jan 1988
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 2510-12-312-4563
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 2510-12-312-4563 1+ Documents (More...)
5310-21-913-5396 5310219135396 219135396 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 2510-12-312-4563
Approved Sources 2510-12-312-4563
- Part Number
- Manufacturer
- Status
- 1 60 259
- Manufacturer
- D0487 - Adam Opel Ag (Active)
- Original Design
- Original Design
- 160259
- D0487 - Adam Opel Ag (Active)
- Original Design
- Original Design
NATO Stock Numbers Related to 2510-12-312-4563
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601