2510-12-134-1515

Documents 9905-14-270-2057 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-25/fsc-2510/de 2510-12-134-1515
Hebel- Verschlusz 2510121341515 121341515 Documents 2510-12-134-1515 2+ Documents ( More... ) https

5310-00-270-2057 5310002702057 002702057 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5950-01-270-2057 5950012702057 012702057 is an item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. it is so designed that its entire intended range of operations is above 20 kilohertz (kilocycles). the minimum value may extend into the audio frequency range (below 20 kilohertz). it may include integral capacitors, coils, resistors, and adjustable tuning cores. for items having only two active terminals see coil, radio frequency. includes types having windings which may be moved with respect to each other. excludes transformer, discriminator.