2340-22-614-6820

4720-22-614-6024 Nonmetallic Hose Assembly 54813070000RNCC: 3 | RNVC: 2 | DAC: 4 15 Dec 2006 2340-22-614-6820

2009 2340-22-119-0540 Dial Indicat Needle 90890-03042RNCC: 3 | RNVC: 2 | DAC: 4 18 Aug 1982 2340-22-614-6820

1075-13-002-0079 1075130020079 130020079 TAILBOX

5310-16-002-0079 5310160020079 160020079 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

0000-LN-002-0079 0000LN0020079 LN0020079