What is Federal Supply Class 2040?

FSC 2040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 2040) in the USA for supply items codified in the category of Marine Hardware and Hull Items.

What is NATO Supply Classification Class 2040?

NSC 2040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 2040 in the USA) for supply items codified in the category of Marine Hardware and Hull Items.

Which Federal Supply Group is FSC 2040 in?

FSC 2040 is in Federal Supply Group (FSG) 20 which contains Ship and Marine Equipment.

Which NATO Supply Classification Group is NSC 2040 in?

NSC 2040is in NATO Supply Classification Group (NSG) 20 which contains Ship and Marine Equipment.

What is a Marine Grapnel?

A Marine Grapnel (GRAPNEL,MARINE) is an item consisting of a shank with a number of curved prongs or hooks rigidly attached at one end and an eye on the other end designed for securing small boats and buoys and for recovering small objects from the bottom of the sea.

What is a Fluked Marine Anchor?

A Fluked Marine Anchor (ANCHOR,MARINE,FLUKED) is an assembly with one or two fixed or pivoted hooks or flukes at its lower end that is attached to a ship or other floating vessel by a cable or a chain, and that, being cast overboard, lays hold of the bottom material and thus holds the ship or other floating vessel in a particular location.

What is a Chain Stopper Assembly?

A Chain Stopper Assembly (STOPPER ASSEMBLY,CHAIN) is a flexible assembly designed for holding the anchor taut in the hawse pipe; for securing the anchor chain of ship riding to anchor; for holding anchor when anchor chain is disconnected; for securing towline for centerline towing of ship.

What is a Sea Anchor?

A Sea Anchor is a bucket or cone shaped item made of cloth stretched on a frame to which is attached a bridgle and a mooring line. The throat or apex may be designed for a storm oil container. When thrown overboard it is used to retard the drift and to keep a boat's bow into the wind in order to minimize the possibility of capsizing. The mooring line may be supplied as a separate item.

What is a Ventilation-Exhaust Flame Arrester?

A Ventilation-Exhaust Flame Arrester (FLAME ARRESTER,VENTILATION-EXHAUST) is a device used to prevent passage of flame through a ventilating duct while air is flowing.

A Rowlock is a device for holding the oar in position, while rowing or steering. It is attached to the gunwale of a small boat by means of a mounting socket, which may or may not be included.

A Boat Hook (HOOK,BOAT) is an item having two projections (one curved and one straight) on one end, and the other end adapted for attaching a pole or handle. It is designed principally for use on small craft, and may have pole included.

What is a Boat Paddle?

A Boat Paddle (PADDLE,BOAT) is a slender piece of wood or metal terminating in a broad blade at one end or both ends, used without a fulcrum, to propel or steer various types of boats, canoes and other floating equipment. May have an attached tip on blade(s).

A Portlight is a framed unit, with attachments to exclude water and control the entrance of air and light, designed to fit a ship's porthole.

What is a Marine Fender?

A Marine Fender (FENDER,MARINE) is a device, fixed or portable, serving to cushion the shocks and protect the hull when a vessel comes in contact with a wharf or another vessel.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Marine Structural Metal Door?

A Marine Structural Metal Door (DOOR,METAL,MARINE STRUCTURAL) is a barrier including frame and still used wherever watertight or airtight construction is required. May also be used where local conditions require construction which is nontight. Excludes HATCH,MARINE.

What is a Marine Hatch?

A Marine Hatch (HATCH,MARINE) is a rectangular or square shaped item with cover to be fitted in a deck or platform hatchway opening, used for access to other decks, or platforms or levels. The item may contain a marine scuttle. Excludes DOOR, METAL, MARINE STRUCTURAL.

What is a Marine Scuttle?

A Marine Scuttle (SCUTTLE,MARINE) is a circular shaped metal scuttle with cover secured by dogs, designed as a closure for access openings in decks, bulkheads, and hatches aboard ship.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Deck Railing Stanchion?

A Deck Railing Stanchion (STANCHION,DECK RAILING) is arelatively long deck mounted upright support, which, together with horizontal cables, rope, or rails, form a deck railing. For relatively short handrail stanchions which provide finger clearance only, see STANCHION, HANDRAIL.

What is a Marine Window?

A Marine Window (WINDOW,MARINE) is a single or multi-piece item(s), curved or flat, with or without frame(s), of transparent material. Designed for mounting in a boat or ship cabin, door, bridge or the like, for protection from water, wind and other foreign matter and to allow visibility.

What is a Roller Curtain Door Panel?

A Roller Curtain Door Panel (PANEL,DOOR,ROLLER CURTAIN) is a slat which interlocks with others to form a DOOR, ROLLER CURTAIN. It may have hardware such as a handle or lock attached.

Marine Hardware and Hull Items - Canada (CA)

Federal Supply Class (FSC): 2040

NATO Supply Classification Class (NSC): 2040

Federal Supply Group (FSG): 20 Ship and Marine Equipment

NATO Supply Classification Group (NSG): 20 Ship and Marine Equipment

Items Managed by Canada (CA) - NCB is 20 or 21

Page 2 of 6

NSN Format for Marine Hardware and Hull Items
Codified by Canada

20	40	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 2040 is a classification within NATO Supply Group 20, which is dedicated to Ship And Marine Equipment. Specifically, NATO Supply Class 2040 focuses on Marine Hardware And Hull Items.

Marine hardware refers to various equipment and components used in the construction, maintenance, and operation of marine vessels. This can include items such as fasteners, fittings, valves, pumps, and other mechanical components.

Hull items, on the other hand, pertain to the structure and outer shell of a marine vessel. This can include items such as hull plates, frames, bulkheads, hatches, and other components that contribute to the integrity and functionality of the vessel's hull.

The purpose of NATO Supply Class 2040 is to provide a standardized classification system for the procurement and management of marine hardware and hull items within the NATO alliance. This classification helps ensure compatibility and interoperability among member nations when it comes to sourcing and maintaining these critical components for their naval and maritime operations.

By categorizing marine hardware and hull items under NATO Supply Class 2040, it becomes easier for member nations to identify, procure, and exchange these items, ultimately enhancing the efficiency and effectiveness of their naval capabilities.

It's important to note that the specific items included in NATO Supply Class 2040 may vary depending on the version and edition of the NATO Supply Classification (NSC) system being used. Therefore, it's always recommended to consult the latest version of the NSC or reach out to the appropriate procurement authorities for the most up-to-date information on the classification and procurement of marine hardware and hull items.

FSC 2040 Marine Hardware and Hull Items - Canada (CA)

Includes Anchors; Grapnels; Sea Anchors; Watertight Doors; Ship Ventilators; Hatches; Manholes; Scuttles; Air Ports; Fenders; Sea Chests; Scuppers; Rudders; Stern Tubes; Chain Pipes; Hawse Pipes; Boiler Uptakes and Stacks; Chocks; Mast and Boom Fittings; Oars; Paddles; Oarlocks.

Frequently Asked Questions(FAQ) for Federal Supply Class 2040

Supply Items Included in Federal Supply Class 2040

Stock Items From Supply Class 2040 Page 2 of 6