2030-99-723-2086

DAC: 2 25 Apr 1991 5340-99-559-3080 Rod End Clevis 4027ARNCC: 3 | RNVC: 2 | DAC: 2 25 Apr 1991 2030-99-723-2086
Rat Centring Piston 9462A-2RNCC: 6 | RNVC: 9 | DAC: 9 25 Apr 1991 2030-99-723-2085 Pilot Cylinder

5305-00-864-9462 5305008649462 008649462 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

3040-01-144-9462 3040011449462 011449462 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

5305-00-514-9462 5305005149462 005149462 is an unhardened externally threaded fastener whose continuous thread extends from a gimlet point for a distance of approximately two-thirds of the length of the screw and which is designed to be driven with an inserted driver.

5340-01-065-9462 5340010659462 010659462 is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. it is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. to permit access, the mounted cover requires partial or complete removal. it may include an observation window. for items permanently attached by hinges and the like, see door, access (as modified). excludes all covers not specifically designed to provide access for the purposes listed above.