2030-99-723-2067

CAGE 76692 National Seal Corp in ,

: 2 25 Apr 1991 5340-99-557-9926 Retaining Strap 5612ARNCC: 3 | RNVC: 2 | DAC: 2 25 Apr 1991 2030-99-723-2067
Yielding Link 9686A-3RNCC: 6 | RNVC: 9 | DAC: 2 25 Apr 1991 3040-99-557-9314 Female Spline Shaft

5315-01-345-9686 5315013459686 013459686 is a cylindrically-shaped headed item, having a solid shank in steps of two or more different diameters under and in addition to the head. excludes pin, eccentric.

5310-01-046-9686 5310010469686 010469686 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3110-00-673-9686 3110006739686 006739686 is a comparatively flat rigid item, with or without a centrally located aperture, designed to hold an annular bearing or a sleeve bearing in a fitted inclosure. it must have drilled and/or tapped holes for mounting purposes. excludes end bell, electrical rotating equipment.