Premium Information is available for this item - Upgrade for $1 a day
2010-00-583-0291
Ship Propulsion Shaft
2010005830291 005830291 2010DA0-101006 LD203001PC110006
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block. View more Ship Propulsion Shaft
May 2023
8
Marketplace 2010-00-583-0291
Request a Quotation from participating marketplace vendors
Related Documents 2010-00-583-0291 4+ Documents (More...)
Ship Propulsion Shaft 2010005830291 005830291 0291 https//www.nsnlookup.com /nato/nato-stock-numbers
Restrictions 2010-00-583-0291
IUID Required
2010-00-583-0291 is a Ship Propulsion Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 2010-00-583-0291
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 2010-00-583-0291
- US Navy (N2H4)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 2010-00-583-0291
- Part Number
- Manufacturer
- Status
- 2010DA0-101006
- Manufacturer
- 34293 - Huntington Ingalls Inc (Active)
- Primary Buy
- Primary Buy
- LD203001PC110006
- 34293 - Huntington Ingalls Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 2010-00-583-0291
- Characteristic
- Specifications
- FIIG
- Specifications
- T08000
- After End Coupling Design [CPNK]
- Integral
- After End Design [CPTC]
- Straight
- After End Keyway [CPJG]
- Not Provided
- Construction [ARQS]
- Hollow
- Coupling Length [CPNM]
- 0.354 Feet Nominal
- Coupling Outside Diameter [AHSU]
- 35.500 Inches Nominal
- Coupling Thickness [CPTB]
- 4.250 Inches Nominal
- Covering Location [CPTS]
- Surfaces Between Bearing Sleeves And Flangefaces,Bore Surfaces
- Diameter [ABMZ]
- 20.500 Inches Minimum And 20.550 Inches Maximum
- Forward End Coupling Design [CPJH]
- Integral
- Forward End Coupling Length [CPJL]
- 0.442 Feet Nominal
- Forward End Coupling Outside Diameter [CPJK]
- 35.500 Inches Nominal
- Forward End Coupling Thickness [CPJM]
- 4.250 Inches Nominal
- Forward End Diameter [CPHX]
- 20.500 Inches Minimum And 20.550 Inches Maximum
- Forward End Design [CPHM]
- Straight
- Forward End Keyway [CPJF]
- Not Provided
- Material [MATT]
- Steel, Mil-S-23284, Class 3
- Outside Diameter [ABKV]
- 20.500 Inches Minimum And 20.550 Inches Maximum
- Inside Diameter [AARX]
- 13.380 Inches Minimum And 13.560 Inches Maximum
- Intermediate Bearing Sleeve Length [AMCE]
- 3.833 Feet Nominal
- Intermediate Bearing Sleeve Outside Diameter [AMCD]
- 20.621 Inches Minimum And 20.625 Inches Maximum
- Protective Covering Type [APZX]
- Composition Rust Preventive
- Overall Length [ABHP]
- 30.088 Feet Nominal
- Threaded After End [CPTD]
- Not Included
- Threaded Forward End [CPNF]
- Not Included
- Unit Type [APQB]
- Line Shaft Section
- Usage Location [BPJZ]
- Starboard
- Surface Finish [AGYE]
- Ground Or Rough Machined Or Smooth Machined
Management Data 2010-00-583-0291
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Navy (DN)
- EA
- Subscribe
- EA
- Oct 2021
- Department of the Navy (DN)
- EA
- Subscribe
- EA
- Oct 2020
- Department of the Navy (DN)
- EA
- Subscribe
- EA
- Nov 2019
- Department of the Navy (DN)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- L
- R
- Refer To Net Price 47406.00
- NET PRICE 47406.00
- R
Navy
- Cognizance:
- 7H
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 2010-00-583-0291
Freight Information 2010-00-583-0291
2010-00-583-0291 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 129930. A Sub NMFC of X. It has a NMFC Description of SHAFTS,TAIL SHIPS PROPELLER SHAFT. 2010-00-583-0291 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65760 which rates the freight between FCL and LCL. 2010-00-583-0291 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 810 for ocean manifesting and military sealift. 2010-00-583-0291 is not classified as a special type of cargo when transported by water. 2010-00-583-0291 is not a consolidation, but exceeds 84" in at least one dimension. It may not be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 2010-00-583-0291
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Heated General Purpose – Heated 40 F and above
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 396.0" H x 39.0" W x 45.0" L
- --
- --
- --
- Any Suitable Process
- 396.0" H x 39.0" W x 45.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Special Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special Requirements. See Specific Instructions or Drawings Provided
- Special requirement – See specific instructions or drawings provided
- --
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement