1680-00-963-7179

8010-12-169-1181 8010121691181 121691181 is pigment dispersed in a varnish vehicle containing natural or synthetic resin. the varnish may be modified with drying oil to the extent that the total drying oil content of the vehicle, including the oil in the varnish, does not exceed 75 percent, by weight, of the total nonvolatile portion of the vehicle. when applied in a thin layer, it dries principally by polymerization and/or oxidation to form a hard, smooth, opaque film. excludes lacquer; enamel, heat resisting; bituminous and ceramic coatings and gold size.

5315-15-062-4696 5315150624696 150624696 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.

5310-21-848-0706 5310218480706 218480706 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1680-99-457-2690 1680994572690 994572690 COVER,HINGE ARM

8010-17-118-3213 8010171183213 171183213 is a coating material in which the basic film-forming component is polyurethane, oil modified polyurethane, or resin modified polyurethane. it may be pigmented.