1560-00-098-8040

Documents 5310-19-004-3160 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-15/fsc-1560/us 1560-00-098-8040
1560000988040 000988040 Documents 1560-00-098-8040 5+ Documents ( More... ) https//www.nsnlookup.com

24815365121882481121882481 is a thin flat metal or plastic https//www.nsnlookup.com /fsg-15/fsc-1560/us 1560-00-098-8040
1560000988040 000988040 shim. see also spacer, plate and spacer, sleeve. https//www.nsnlookup.com

53335365121755333121755333 is a circular-shaped https//www.nsnlookup.com /fsg-15/fsc-1560/us 1560-00-098-8040
1560000988040 000988040 valve, graphite impregnated and lubricated items. https//www.nsnlookup.com

Documents 5365-12-184-5227 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-15/fsc-1560/us 1560-00-098-8040
1560000988040 000988040 assortment, gasket; and bearing, washer, thrust. https//www.nsnlookup.com

5310-01-201-0303 5310012010303 012010303 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.