What is Federal Supply Class 1560?

FSC 1560 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1560) in the USA for supply items codified in the category of Airframe Structural Components.

What is NATO Supply Classification Class 1560?

NSC 1560 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1560 in the USA) for supply items codified in the category of Airframe Structural Components.

Which Federal Supply Group is FSC 1560 in?

FSC 1560 is in Federal Supply Group (FSG) 15 which contains Aerospace Craft and Structural Components.

Which NATO Supply Classification Group is NSC 1560 in?

NSC 1560is in NATO Supply Classification Group (NSG) 15 which contains Aerospace Craft and Structural Components.

What is an Aircraft Structural Plate?

An Aircraft Structural Plate (PLATE,STRUCTURAL,AIRCRAFT) is a flat or preformed item of metallic or nonmetallic material. It may vary in shape and its surface may be smooth and/or serrated. Its thickness is small in comparison to both its length and width. It is designed to be mounted upon a surface or between two surfaces. Its primary function is to strengthen, join, or separate aircraft structural parts. Excludes PLATE, MENDING; SHIM; and SPACER, PLATE.

What is an Aircraft Fuselage Fairing?

An Aircraft Fuselage Fairing (FAIRING,FUSELAGE,AIRCRAFT) is this previously deleted INC has been reinstated for file maintenance only.

What is an Aircraft Wing Fairing?

An Aircraft Wing Fairing (FAIRING,WING,AIRCRAFT) is this previously deleted INC has been reinstated for file maintenance only.

What is an Aircraft Elevator?

An Aircraft Elevator (ELEVATOR,AIRCRAFT) is a moveable auxiliary airfoil, usually attached to the trailing edge of the horizontal stabilizer of an aircraft. It is designed to produce a desired up or down motion during flight.

What is an Aircraft Structural Component Support?

An Aircraft Structural Component Support (SUPPORT,STRUCTURAL COMPONENT,AIRCRAFT) is a device of various shapes to be permanently attached to the structure of an aircraft. It is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. It may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. Excludes items which are primarily designed for dampening shock and/or vibration. Excludes BRACKET, ANGLE; BRACKET, DOUBLE ANGLE; BRACKET, SHELF; BRACKET, MOUNTING; BRACKET (1), STRUCTURAL COMPONENT, AIRCRAFT; and RADIUS BLOCK.

What is an Aircraft Structural Panel?

An Aircraft Structural Panel (PANEL,STRUCTURAL,AIRCRAFT) is a preformed item of various shapes, and contours, which may have a sandwich or honeycomb core bonded to a metallic or nonmetallic facing material. It is used to enclose integral portions of the fuselage or to form partitions or sections within a wing, empennage, fuselage, nacelle or crew compartment. It may have mounting provisions such as predrilled holes to facilitate installation, but will have no items attached to it except bracket (s) or other securing devices to accommodate its own mounting or support. It may be mounted by means of fasteners, bonding or welding. Excludes PANEL, INTERIOR LINING, AIRCRAFT; COVER ACCESS; COVER, ACCESS, AIRCRAFT; FLOOR (1), AIRCRAFT; CORE MATERIAL, CELLULAR, STRUCTURAL.

What is a Small Arms-Fragmentation Protective Supplemental Armor?

A Small Arms-Fragmentation Protective Supplemental Armor (ARMOR,SUPPLEMENTAL,SMALL ARMS-FRAGMENTATION PROTECTIVE) is a protective covering specially designed to be mounted on an aircraft, ground vehicle or fire control equipment. It protects the aircraft, ground vehicle or their occupants, or fire control equipment from small arms or anti-aircraft fire, or exploding-mine fragments. It may be made from metallic or nonmetallic material, either in sections or in one piece. It may have integral fittings for installation. Excludes ARMOR PLATE and BODY ARMOR, FRAGMENTATION PROtECTIVE and CLOTH (1), BALLISTIC.

What is an Aircraft Structural Component Bracket?

An Aircraft Structural Component Bracket (BRACKET,STRUCTURAL COMPONENT,AIRCRAFT) is an item of various configuration that is an integral member of the airframe structure. It is specifically designed for the purpose of maintaining, positioning, joining, and strengthening the aircraft structure. It may include holes for mounting purposes or to form an assembly.

What is an Aircraft Structural Component Fitting?

An Aircraft Structural Component Fitting (FITTING,STRUCTURAL COMPONENT,AIRCRAFT) is an item of unique shapes and cross-sectional configurations specifically designed with dimensional tolerances and finishes. It may be metallic and/or nonmetallic and must be able to mate with or join to like items with aircraft application. The item may consist of more then one (1) piece to form an assembly. Do not use if a more specific item name exists. Excludes BRACKET (1), STRUCTURAL COMPONENT, AIRCRAFT.

What is an Aircraft Frame?

An Aircraft Frame (FRAME,AIRCRAFT) is a principal transverse structural member of the fuselage, hull, nacelle, pod, and the like. It follows the periphery and provides shape and support by attachment to the longitudinal members or skin.

What is an Aircraft Stiffener?

An Aircraft Stiffener (STIFFENER,AIRCRAFT) is an item, generally a strip, designed to strengthen and resist loads by attachment to various components such as skins, ribs, pylons, and the like.

What is an Aircraft Fairing?

An Aircraft Fairing (FAIRING,AIRCRAFT) is a secondary structure whose function is to reduce drag by providing a streamlined surface or covering.

What is an Aircraft Channel?

An Aircraft Channel (CHANNEL,AIRCRAFT) is a channel-shaped item with or without mounting hardware, designed to be mounted on the airframe. It supports and/or protects electrical cable (s), air and/or fuel line (s), and the like.

An Aileron is a hinged or pivoted item forming a horizontal control surface, usually a portion of the trailing edge of a wing. Its primary function is to control the roll movement of an airplane or glider about its longitudinal axis.

What is a Wing Landing Flap?

A Wing Landing Flap (FLAP,WING LANDING) is a movable airfoil, whether hinged, pivoted or mounted on tracks, forming part of the leading or trailing edge of a wing of an aircraft. It is designed for the specific purpose of lowering the landing speed by varying the effective camber and may be used in accelerated takeoffs and improved climbs. Excludes leading edge devices that prevent stalls by ducting air over the top of a wing through extended slats. Excludes SLAT,AIRCRAFT.

A Former is a light, secondary structural member that does not completely partition various components. It is designed to give cross-sectional shape and strength to the item of which it is a part.

A Longeron is a principal longitudinal member of the structural framework of an aircraft fuselage, nacelle, empennage boom, or similar component.

What is an Exhaust Pipe?

An Exhaust Pipe (PIPE,EXHAUST) is a rigid tubular item designed to direct the exhaust gases away from an engine, heater, or the like. For flexible items, see HOSE, METALLIC.

A Wing Rib (RIB,WING) is a forming element of the wing of an aircraft.

What is an Aircraft Skin?

An Aircraft Skin (SKIN,AIRCRAFT) is a preformed metallic or nonmetallic sheet of various shapes and contours which is used as a segment of the covering of an airframe. It may be predrilled to facilitate mounting. Excludes CLOTH, AIRPLANE

What is a Wing Stringer?

A Wing Stringer (STRINGER,WING) is a longitudinal reinforcement in the wing of an aircraft.

What is an Aircraft Window Panel?

An Aircraft Window Panel (WINDOW PANEL,AIRCRAFT) is an item with a transparent pane designed for mounting in the exterior or interior portion of the aircraft. It permits visibility of a desired area and protects the occupants and interior of the aircraft from foreign matter. It may consist of frame, seal(s), ring(s), spacer(s), plate(s) or like components. Excludes WINDSHIELD PANEL, AIRCRAFT; and GLASS, LAMINATED.

What is an Aircraft Windshield Panel?

An Aircraft Windshield Panel (WINDSHIELD PANEL,AIRCRAFT) is an item with a transparent pane designed to be mounted in the crew compartment of an aircraft. It protects the pilot(s) and the interior of an aircraft from foreigh matter and allows visibility. It is of a special shape to conform to the contour of the aircraft. It may include a frame, retainer, mounting hardware, and the like. Excludes GLASS, LAMINATED and WINDOW PANEL, AIRCRAFT.

A Cowling is a detachable cover made of metallic or synthetic materiel used to cover an air vehicle engine when it is not an internal part of the wing or fuselage.

Airframe Structural Components - New Zealand (NZ)

Federal Supply Class (FSC): 1560

NATO Supply Classification Class (NSC): 1560

Federal Supply Group (FSG): 15 Aerospace Craft and Structural Components

NATO Supply Classification Group (NSG): 15 Aerospace Craft and Structural Components

Items Managed by New Zealand (NZ) - NCB is 98

Page 1 of 6

NSN Format for Airframe Structural Components
Codified by New Zealand

15	60	98	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1560 refers to Airframe Structural Components, which are a specific category of parts used in the construction and maintenance of aerospace craft. These components are essential for providing structural integrity and support to the airframe.

Airframe Structural Components include various parts such as beams, ribs, spars, stringers, panels, fairings, and other structural elements that make up the framework of an aircraft. These components are typically made from materials like aluminum, titanium, or composite materials, depending on the specific requirements of the aircraft.

NATO Supply Class 1560 falls under NATO Supply Group 15, which is dedicated to Aerospace Craft And Structural Components. This supply group encompasses a wide range of items related to the aerospace industry, including airframe structural components, aircraft engines, landing gear, hydraulic systems, electrical systems, and more.

The purpose of NATO Supply Class 1560 is to provide a standardized classification system for airframe structural components, ensuring compatibility and interoperability among NATO member countries. This classification system helps in the procurement, inventory management, and maintenance of these components, making it easier for organizations to identify and acquire the necessary parts for their aerospace craft.

In summary, NATO Supply Class 1560 for Airframe Structural Components plays a crucial role in the aerospace industry by providing a standardized classification system for these components. It helps ensure the structural integrity and safety of aerospace craft by facilitating the procurement and maintenance of the necessary parts.

FSC 1560 Airframe Structural Components - New Zealand (NZ)

Includes Flight Control Surfaces; Internal and External Auxiliary Fuel Tanks; Exhaust Systems; Pylons, Trim Tabs; Aircraft.

Excludes Fitted Covers; Helicopter Rotor Brake System Components; Aircraft Loose Equipment and Alternate Mission Configuration Equipment stored on board the aircraft.

Frequently Asked Questions(FAQ) for Federal Supply Class 1560

Supply Items Included in Federal Supply Class 1560

Stock Items From Supply Class 1560 Page 1 of 6