1560-15-061-0694

physical damage due to environmental conditions. https//www.nsnlookup.com /fsg-15/fsc-1560/it 1560-15-061-0694
Articoli Vari 1560150610694 150610694,2511-3 1560-15-061-0694 1560150610694 150610694 ARTICOLI

5365-99-660-6668 5365996606668 996606668 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

CAGE 9T933 Birmingham Egg in Birmingham, AL United States

5315-01-521-1542 5315015211542 015211542 is a headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. it may have welding projections. it also may contain holes drilled perpendicular to axial centerline. excludes pin, eccentric.

CAGE 4N275 Birmingham Produce Inc in Birmingham, AL United States