1560-14-331-1786

Documents 3040-00-505-3566 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-15/fsc-1560/fr 1560-14-331-1786
Thermal Insulation Blanket 1560143311786 1560-14-331-1786 1560143311786 143311786 is a flexible

Documents 6515-01-468-0137 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-15/fsc-1560/fr 1560-14-331-1786
Thermal Insulation Blanket 1560143311786 https//www.nsnlookup.com /fsg-12/fsc-1240/de 1240-12-172

your web browser . 1240-12-172-7039Fassung1240121727039 121727039 1224-314.11 532008-0157.000 1224-314-11
DAC 4 532008-0157.000 C5393 - Hensoldt Optronics Gmbh (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 1224-314-11

4520-00-651-1650 4520006511650 006511650 is an electrical device in the form of a resistor consisting of a resistance wire, an insulating material, and may be sheathed. includes infrared elements. it is designed to transform electrical current into heat. it may include an automatic control to regulate the amount of heat generated.

5365-66-136-1463 5365661361463 661361463 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.