1560-14-233-5917

vendors Request Related Documents 3439-21-871-5917 4 https//www.nsnlookup.com /fsg-15/fsc-1560/fr 1560-14-233-5917
1560142335917 142335917 Day 1560-14-233-5917 RQST Updated Every Day 1560-14-233-5917 RQST NE Related
Documents 1560-14-233-5917 4 https//www.nsnlookup.com /fsg-25/fsc-2520/nz 2520-98-856-5917 Transmission

5306-21-603-3252 5306216033252 216033252 is an externally threaded fastener whose threaded portion is of one nominal diameter having a wing or wings mounted on the bolt head or on a trunnion nut. the wing or wings upset when the toggle bolt is inserted in a constricted passage in a hollow wall and when the bolt is tightened, the wing or wings assume a transverse or athwart position. it is used for securely holding fixtures or devices to hollow walls.

4730-21-668-8146 4730216688146 216688146 is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

5306-21-602-2523 5306216022523 216022523 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.

5306-21-107-1569 5306211071569 211071569 is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. see also screw, cap, hexagon head and screw, machine.