1355-14-287-0144

enable JavaScript in your web browser . 5985-66-128-6551Upp Angle Adjuster5985661286551 661286551 686/2/10610
5985-66-128-6551 Australia (ZA) Approved Sources 5985-66-128-6551 Part NumberManufacturerStatus686/2/10610

5930-01-355-5435 5930013555435 013555435 is a switch designed to perform the function of opening and/or closing one or more electrical circuits. the switching function is accomplished by means of separable contacts, semiconductor devices, or a combination of separable contacts and semiconductor devices. the item functions in response to electrical changes in its internal circuit caused by capacitance, inductance, or magnetic flux changes. it is activated by permanent magnets, metallic materials, or nonmetallic materials which come within its sensing range. for sensing switches which respond to changes other than capacitance, inductance, or magnetic flux, see switch, airflow; switch, centrifugal; switch, inertia; switch, pressure; switch, pressure-thermostatic; switch, thermostatic; and switch, tilt.

4921-14-470-7206 4921144707206 144707206 is a maintenance kit for components of torpedoes.

5998-01-355-5511 5998013555511 013555511 is an insulating panel upon which two or more connector, receptacle, electrical, are mounted, and completely processed electrical conductor paths are deposited, etched, or printed in various paths. it provides or completes a circuit between two or more circuit card assembly or electronic components assembly. it may be designed for panel or chassis mounting, or for insertion into a connector, receptacle, electrical. includes motherboards. for items containing processed electrical conductor paths and contacts for plug-in connecting facilities, see printed wiring board. see also printed circuit board; circuit card assembly and cable assembly, printed, flexible.

4330-14-314-1825 4330143141825 143141825 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.