1355-14-219-7153

JavaScript in your web browser . 1005-12-317-8681Rohrwaffenw Zapfen1005123178681 123178681 1000192-01 2 00300
12-317-8681 Germany (ZG) Approved Sources 1005-12-317-8681 Part NumberManufacturerStatus1000192-01 2 00300
C2311 - Baainbw Benutzungsrechte An (Active) Definitive Standard RNCC 2 RNVC 2 DAC 3 1000192-01 2 00300

5995-12-329-6415 5995123296415 123296415 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

3455-27-033-5553 3455270335553 270335553 is a rotary cutting tool of cylindrical form with either single or double cutting ends and with either a straight or tapered shank. the teeth may be straight or helical and be either right hand or left hand. it is used for milling slots, keyways and pockets where the ordinary arbor type of milling cutter cannot be used. excludes cutter, milling, shell end.

5998-12-362-4476 5998123624476 123624476 is a grouping of two or more different types of electrical/electronic components mounted on a common mounting. it may include an assembly of electrical/electronic components mounted on multiple printed wiring board(s) mounted back to back, stacked, and the like. the item is generally a component of a subassembly and cannot be assigned a more definite item name. excludes items which may be identified as a subassembly. for an assembly of electrical/electronic components mounted on a single printed wiring board, see circuit card asseembly. do not use if a more specific name applies.

5310-99-605-7925 5310996057925 996057925 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.