1305-12-372-2943

90100306#400 DM21 1305-02462 AA63 Managed by Germany NSN Created on 4 Jul 2007 Data Last Changed January
RQST NE Updated Every Day 1305-12-372-2943 RQST Updated Every Day 1305-12-372-2943 RQST NE Related Documents
DM21 A straight tube fitting having a different size connection on each end.

JavaScript in your web browser . 1305-12-341-20625.56 Millimeter Cartridge1305123412062 123412062 90100305 DM21
1305-02462 AA63 1305-0311-2 90100305 1305-12-341-2062 Managed by Germany NSN Created on 8 Aug 1996 Data
6456Detonating Sound Producing Device1375121656456 121656456 1300059-2000 TL1375-0198 1AL1300059-2000 DM21

JavaScript in your web browser . 1305-12-341-29075.56 Millimeter Cartridge1305123412907 123412907 90100305 DM21
1305-02462 AA63 90100305 1305-12-341-2907 Managed by Germany NSN Created on 20 Aug 1996 Data Last Changed
RNCC 3 RNVC 2 DAC 1 90100305 D9697 - Ruag Ammotec Gmbh (Replaced) Original Design RNCC 3 RNVC 9 DAC 1 DM21

5310-99-430-3419 5310994303419 994303419 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-99-038-3226 5310990383226 990383226 is a washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.