1270-00-011-0941

4320-01-674-4839 4320016744839 016744839 is a combination of items used in sealing various rotary shaft equipment. it may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. excludes seal, plain encased.

5310-14-224-4863 5310142244863 142244863 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3010-01-358-0555 3010013580555 013580555 is a device for connecting the ends of two shafts so that rotary motion of one shaft is transmitted to the other shaft. it is constructed to allow for slight misalignment of shafts both linear and angular.

5330-01-576-6708 5330015766708 015766708 SEAL,MECHANICAL,SP

4320-01-538-3553 4320015383553 015383553 is a combination of items used in sealing various rotary shaft equipment. it may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. excludes seal, plain encased.