1220-01-067-2213

Documents 6610-99-220-7520 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-12/fsc-1220/us 1220-01-067-2213
Base 1220010672213 010672213,2207520 Documents 1220-01-067-2213 4+ Documents ( More... ) https/

Documents 7510-15-220-7520 4+ Documents ( More... ) https//www.nsnlookup.com /fsg-12/fsc-1220/us 1220-01-067-2213
Base 1220010672213 010672213,2207520 valve, graphite impregnated and lubricated items. https//www.nsnlookup.com

2040-01-220-7520 2040012207520 012207520 DAMPER,VENT

9999-00-220-7520 9999002207520 002207520

5310-14-220-7520 5310142207520 142207520 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.