Nuclear Ordnance

Federal Supply Group (FSG): 11

NATO Supply Classification Group (NSG): 11

Item Hits: 4558 - Page 1 of 10

NSN Format for Nuclear Ordnance

11XXXXXXXXXXX
Group
FSG
ClassNCBIdentifier
FSC
Federal Supply Class
NIIN
NSN
FSG 11 Nuclear Ordnance
FSG 11 Nuclear Ordnance

This group includes, in particular, nuclear ordnance training weapons, practice ballistic units, and all components specially designed therefor, when not specifically classified elsewhere. Also included in the group are specially designed simulators and mockups, which are integral parts of the above. Excluded from this group are general purpose nose cones, case sections, flare sections or center sections designed to carry payloads other than nuclear and/or for use on a missile, rocket, or re-entry vehicle to attain the necessary aerodynamic configuration.

Additional Information for Nuclear Ordnance Additional Information for Nuclear Ordnance

Nuclear ordnance refers to weapons that utilize nuclear reactions to create a powerful explosion. These weapons are designed to release an immense amount of energy through nuclear fission or fusion reactions. Nuclear ordnance includes both nuclear bombs and nuclear warheads that can be delivered by various means, such as missiles, aircraft, or submarines.

Nuclear weapons are highly destructive and have the potential to cause massive devastation and loss of life. They are considered to be weapons of mass destruction due to their immense destructive power and long-lasting effects. The use of nuclear ordnance is governed by international treaties and agreements, such as the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), which aims to prevent the spread of nuclear weapons and promote disarmament.

The development, possession, and use of nuclear ordnance are highly regulated and restricted to a limited number of countries. These countries, known as nuclear-armed states, have the capability to produce and deploy nuclear weapons. The possession of nuclear ordnance is often seen as a deterrent against potential adversaries and is considered a significant factor in global security and geopolitics.

The use of nuclear ordnance is a highly controversial and sensitive topic due to the catastrophic consequences it can have. The potential for widespread destruction, long-term environmental damage, and the humanitarian impact of nuclear weapons has led to calls for disarmament and non-proliferation efforts worldwide.

It is important to note that the information provided here is for general knowledge purposes only. The specifics of nuclear ordnance, including technical details and operational capabilities, are highly classified and closely guarded by the countries possessing such weapons.

Frequently Asked Questions (FAQ) for Federal Supply Group 11 Frequently Asked Questions (FAQ) for Federal Supply Group 11

What is Federal Supply Group 11?
FSG 11 is the Federal Supply Group (formally known as NATO Supply Classification Group NSG 11) in the USA for supply items codified in the category of Nuclear Ordnance.
What is NATO Supply Classification Group 11?
NSG 11 is the NATO Supply Classification Group (also known as Federal Supply Group FSG 11 in the USA) for supply items codified in the category of Nuclear Ordnance.
Which Federal Supply Classes are in FSG 11?
FSG 11 contains the following Federal Supply Classes (FSC) (formally known as NATO Supply Classification Class [NSC]): 1105, 1110, 1127, 1140, 1130, 1190, 1195, 1135, 1115, 1145
Which NATO Supply Classification Classes are in NSG 11?
NSG 11 contains the following NATO Supply Classification Classes (NSC) (also known as Federal Supply Class [FSC] in the USA): 1105, 1110, 1127, 1140, 1130, 1190, 1195, 1135, 1115, 1145
When did the transition from Federal Supply Groups (FSG) to NATO Supply Groups (NSG) occur?
The transition from Federal Supply Groups (FSG) to NATO Supply Groups (NSG) occurred on January 1, 1997. This change was implemented to align the classification and coding systems used by NATO member countries for military supplies and equipment. Federal Supply Groups (FSG) are now obsolete.

Top 20 Supply Items Included in Federal Supply Group 11 Top 20 Supply Items Included in Federal Supply Group 11

What is a Branched Electrical Special Purpose Cable Assembly? 38 Items
A Branched Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness.
What is a Fin Mounting Plate? 16 Items
A Fin Mounting Plate (PLATE,MOUNTING,FIN) is a rigid metal item with two or more plane surfaces machined to maintain the correct angular position of two or more fins. It may have mounting holes.
What is a Branched Wiring Harness? 26 Items
A Branched Wiring Harness (WIRING HARNESS,BRANCHED) is an item conforming to the definition of WIRING HARNESS with branches (forks). See also CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED, Excludes LEAD ASSEMBLY, ELECTRICAL; and LEAD, TEST.
What is a Signal Data Converter? 19 Items
A Signal Data Converter (CONVERTER,SIGNAL DATA) is an electronic device which converts a data modulated signal of one form to a data modulated signal of another form.
What is an Electrical Power Cable Assembly? 52 Items
An Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL) is a definite continuous length of CABLE, POWER, ELECTRICAL having one or both ends processed and/or terminated in fittings which provide for connection to other items. Excludes CABLE AND CONDUIT ASSEMBLY, ELECTRICAL and items having branches or forks. See also WIRING HARNESS.
What is an Electrical Special Purpose Cable Assembly? 368 Items
An Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more ends processed or terminated in fittings which provide for connection to other items. Excludes items having branches or forks. Excludes LEAD, TEST and CABLE AND CONDUIT ASSEMBLY, ELECTRICAL.
What is an Electrical Lead? 27 Items
An Electrical Lead (LEAD,ELECTRICAL) is a definite length of one-conductor electrical wire, wire braid, or other conductive material, except cable or cord, one or both ends of which are processed or terminated. The lead may be of any size or shape, insulated or uninsulated. See also LEAD, TEST and BUS CONDUCTOR. Excludes LEAD, STORAGE BATTERY; LEAD, IGNITION, ENGINE, and items having attached switches, lampholders, suppressors, resistors, and the like.
What is a Shaft Retaining Plate? 15 Items
A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Remote Control Lever? 24 Items
A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Bell Crank? 13 Items
A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Linear Actuating Cylinder Assembly? 15 Items
A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Branched Electrical Power Cable Assembly? 17 Items
A Branched Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, POWER, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings which provide for connection to other items. Excludes LEAD, TEST. See also WIRING HARNESS, BRANCHED.
What is a Branched Electrical Special Purpose Cable Assembly? 38 Items
A Branched Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness.
What is a Mechanical Drive Housing? 16 Items
A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Detent Plunger? 11 Items
A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Branched Wiring Harness? 26 Items
A Branched Wiring Harness (WIRING HARNESS,BRANCHED) is an item conforming to the definition of WIRING HARNESS with branches (forks). See also CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED, Excludes LEAD ASSEMBLY, ELECTRICAL; and LEAD, TEST.
What is a Manual Control Lever? 30 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Bell Crank? 13 Items
A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is an Electrical Power Cable Assembly? 52 Items
An Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL) is a definite continuous length of CABLE, POWER, ELECTRICAL having one or both ends processed and/or terminated in fittings which provide for connection to other items. Excludes CABLE AND CONDUIT ASSEMBLY, ELECTRICAL and items having branches or forks. See also WIRING HARNESS.
What is an Electrical Special Purpose Cable Assembly? 368 Items
An Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more ends processed or terminated in fittings which provide for connection to other items. Excludes items having branches or forks. Excludes LEAD, TEST and CABLE AND CONDUIT ASSEMBLY, ELECTRICAL.
What is a Radio Frequency Cable Assembly? 54 Items
A Radio Frequency Cable Assembly (CABLE ASSEMBLY,RADIO FREQUENCY) is a definite length of CABLE, RADIO FREQUENCY having one or both ends processed and/or terminated in fittings which provide for connection to other items. Includes multiple cable assemblies in a common jacket or shield. Excludes items having branches or forks and LEAD, TEST. See also CABLE ASSEMBLY, RADIO FREQUENCY, BRANCHED.
What is an Electrical Lead? 27 Items
An Electrical Lead (LEAD,ELECTRICAL) is a definite length of one-conductor electrical wire, wire braid, or other conductive material, except cable or cord, one or both ends of which are processed or terminated. The lead may be of any size or shape, insulated or uninsulated. See also LEAD, TEST and BUS CONDUCTOR. Excludes LEAD, STORAGE BATTERY; LEAD, IGNITION, ENGINE, and items having attached switches, lampholders, suppressors, resistors, and the like.
What is a Radio Frequency Cable Assembly Set? 14 Items
A Radio Frequency Cable Assembly Set (CABLE ASSEMBLY SET,RADIO FREQUENCY) is a grouping of items having the same basic name for use in connection with, or the performance of a closely related operation having two or more separate CABLE ASSEMBLY, RADIO FREQUENCY. It may or may not be enclosed in separate cases. Excludes CABLE ASSEMBLY, RADIO FREQUENCY; CABLE ASSEMBLY, RADIO FREQUENCY, BRANCHED and WIRING HARNESS (as modified).
What is a Branched Electrical Power Cable Assembly? 17 Items
A Branched Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, POWER, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings which provide for connection to other items. Excludes LEAD, TEST. See also WIRING HARNESS, BRANCHED.
What is a Branched Electrical Special Purpose Cable Assembly? 38 Items
A Branched Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness.
What is a Branched Wiring Harness? 26 Items
A Branched Wiring Harness (WIRING HARNESS,BRANCHED) is an item conforming to the definition of WIRING HARNESS with branches (forks). See also CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED, Excludes LEAD ASSEMBLY, ELECTRICAL; and LEAD, TEST.
What is an Electrical Power Cable Assembly? 52 Items
An Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL) is a definite continuous length of CABLE, POWER, ELECTRICAL having one or both ends processed and/or terminated in fittings which provide for connection to other items. Excludes CABLE AND CONDUIT ASSEMBLY, ELECTRICAL and items having branches or forks. See also WIRING HARNESS.
What is a Branched Electrical Power Cable Assembly? 17 Items
A Branched Electrical Power Cable Assembly (CABLE ASSEMBLY,POWER,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, POWER, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings which provide for connection to other items. Excludes LEAD, TEST. See also WIRING HARNESS, BRANCHED.
What is a Branched Electrical Special Purpose Cable Assembly? 38 Items
A Branched Electrical Special Purpose Cable Assembly (CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED) is a definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness.
What is a Branched Wiring Harness? 26 Items
A Branched Wiring Harness (WIRING HARNESS,BRANCHED) is an item conforming to the definition of WIRING HARNESS with branches (forks). See also CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, BRANCHED, Excludes LEAD ASSEMBLY, ELECTRICAL; and LEAD, TEST.
What is a Manual Control Lever? 30 Items
A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.

Stock Items for FSG 11 Stock Items for FSG 11 Page 1 of 10

1Q 604933
RNCC: 3 | RNVC: 2 | DAC: 1
42070843
RNCC: 3 | RNVC: 2 | DAC: 1
1010FG-2201579
RNCC: 2 | RNVC: 1 | DAC: 3
P175067-001
RNCC: 3 | RNVC: 2 | DAC: 1
1009 1DP 0556
RNCC: 2 | RNVC: 1 | DAC: 3
(241)A3460CBD71347P06
RNCC: 3 | RNVC: 2 | DAC: U
A2810549-001
RNCC: 3 | RNVC: 2 | DAC: 1
P-175560-003
RNCC: 3 | RNVC: 2 | DAC: 1
302000312000
RNCC: 3 | RNVC: 2 | DAC: 4
18.75.99.50
RNCC: 3 | RNVC: 2 | DAC: 5
(7001)150599194
RNCC: 5 | RNVC: 2 | DAC: U
4695322
RNCC: 3 | RNVC: 2 | DAC: 5
V36300.00
RNCC: 3 | RNVC: 2 | DAC: 5
321323
RNCC: 3 | RNVC: 2 | DAC: 1
V35893.00
RNCC: 3 | RNVC: 2 | DAC: 5
053J66-599015C
RNCC: 3 | RNVC: 2 | DAC: 5
75218567
RNCC: 3 | RNVC: 2 | DAC: 5
P-175567-001
RNCC: 3 | RNVC: 2 | DAC: 1
ONUR-1 MOD-1
RNCC: 2 | RNVC: 1 | DAC: 3
P-175560-002
RNCC: 3 | RNVC: 2 | DAC: 1
735209
RNCC: 3 | RNVC: 2 | DAC: 1
615716
RNCC: 3 | RNVC: 2 | DAC: 1
2733330201
RNCC: 2 | RNVC: 1 | DAC: 3
SUYT-1
RNCC: 2 | RNVC: 1 | DAC: 3
LEV6-109-4
RNCC: 3 | RNVC: 2 | DAC: 1
1005-000520
RNCC: 3 | RNVC: 2 | DAC: 1
P-175560-001
RNCC: 3 | RNVC: 2 | DAC: 1
P-175560-004
RNCC: 3 | RNVC: 2 | DAC: 1
053V01-542331S
RNCC: 3 | RNVC: 2 | DAC: 5
P-175567-002
RNCC: 3 | RNVC: 2 | DAC: 1
TUBO NONEL 300MT INERTE
RNCC: 3 | RNVC: 2 | DAC: 5
321329
RNCC: 3 | RNVC: 2 | DAC: 1
800047514
RNCC: 3 | RNVC: 2 | DAC: 5
371006S
RNCC: 3 | RNVC: 2 | DAC: 4
053M66-573663T
RNCC: 3 | RNVC: 2 | DAC: 4
265553
RNCC: 3 | RNVC: 2 | DAC: 2
P175067-002
RNCC: 3 | RNVC: 2 | DAC: 1
0766788F00
RNCC: 3 | RNVC: 2 | DAC: 5
P-175060-002
RNCC: 3 | RNVC: 2 | DAC: 1
P-175060-001
RNCC: 3 | RNVC: 2 | DAC: 1
053V01-542330R
RNCC: 3 | RNVC: 2 | DAC: 5
053E66-599186C
RNCC: 3 | RNVC: 2 | DAC: 5
306-2517/0101
RNCC: 3 | RNVC: 2 | DAC: 5
13HJ04643008S01-801-31
RNCC: 3 | RNVC: 2 | DAC: 1
0766787E00
RNCC: 3 | RNVC: 2 | DAC: 5
167851
RNCC: 3 | RNVC: 2 | DAC: 6
NO PRIMARY REF 99-605-8284
RNCC: 3 | RNVC: 2 | DAC: 9
TAH0E235
RNCC: 3 | RNVC: 2 | DAC: 1
91040373
RNCC: 3 | RNVC: 2 | DAC: 1
91040412
RNCC: 3 | RNVC: 2 | DAC: 1
1572D005-21
RNCC: 3 | RNVC: 2 | DAC: E
2510700226
RNCC: 5 | RNVC: 2 | DAC: 1
HR2-707577
RNCC: 3 | RNVC: 2 | DAC: 2
1-0WE158238
RNCC: 3 | RNVC: 2 | DAC: 2
7H1071
RNCC: 3 | RNVC: 2 | DAC: 5
AD80900381
RNCC: 5 | RNVC: 2 | DAC: 9
6M4R6389A
RNCC: 3 | RNVC: 2 | DAC: 2
80095711
RNCC: 3 | RNVC: 2 | DAC: 1
73116872
RNCC: 5 | RNVC: 2 | DAC: 6
1010FK-2702323
RNCC: 2 | RNVC: 1 | DAC: 3
S3Z7117351600
RNCC: 3 | RNVC: 2 | DAC: 4
(241)A0042959748002002
RNCC: 5 | RNVC: 2 | DAC: U
KIT-COMPLETO-CAL.9
RNCC: 3 | RNVC: 2 | DAC: 1
30213
RNCC: 3 | RNVC: 2 | DAC: 2
85VE8370-603
RNCC: 3 | RNVC: 2 | DAC: 3
2H010403-C0010
RNCC: 3 | RNVC: 2 | DAC: A
3161C061
RNCC: 3 | RNVC: 2 | DAC: 4
92275101551
RNCC: 3 | RNVC: 2 | DAC: 1
2-0WE158330
RNCC: 3 | RNVC: 2 | DAC: 2
5098-31019
RNCC: 3 | RNVC: 2 | DAC: 2
0766771K00
RNCC: 3 | RNVC: 2 | DAC: 5
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
0-0WE-187714
RNCC: 3 | RNVC: 2 | DAC: 2
60835884
RNCC: 5 | RNVC: 2 | DAC: 1
A60025030
RNCC: 5 | RNVC: 2 | DAC: 1
A81018136-01
RNCC: 3 | RNVC: 2 | DAC: 3
1-OWE-195303
RNCC: 3 | RNVC: 2 | DAC: 2
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
DGSWS 20343
RNCC: 3 | RNVC: 2 | DAC: 2
3-0WE-182495
RNCC: 3 | RNVC: 2 | DAC: 2
60835847
RNCC: 3 | RNVC: 2 | DAC: 1
29300032
RNCC: 5 | RNVC: 2 | DAC: 2
3-0WE159561
RNCC: 5 | RNVC: 2 | DAC: 2
3-0WE158740
RNCC: 3 | RNVC: 2 | DAC: 2
60835882
RNCC: 5 | RNVC: 2 | DAC: 1
38700
RNCC: 3 | RNVC: 2 | DAC: 2
044U04-528223E
RNCC: 3 | RNVC: 2 | DAC: 5
80095705
RNCC: 3 | RNVC: 2 | DAC: 1
HR/2/834059
RNCC: 3 | RNVC: 2 | DAC: 2
K43184824-001
RNCC: 3 | RNVC: 2 | DAC: 1
0-0WE147876
RNCC: 5 | RNVC: 2 | DAC: 2
2-0WE181399
RNCC: 3 | RNVC: 2 | DAC: 2
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
271615222154
RNCC: 3 | RNVC: 2 | DAC: 4
0000000273322
RNCC: 6 | RNVC: 9 | DAC: 9
A-31-3851
RNCC: 3 | RNVC: 2 | DAC: 4
1-0WE189934
RNCC: 3 | RNVC: 2 | DAC: 2
K38411
RNCC: 3 | RNVC: 2 | DAC: 2
939-ELE-12
RNCC: 3 | RNVC: 2 | DAC: 5
0586201R00
RNCC: 5 | RNVC: 2 | DAC: 5
125MS.08-0110Z
RNCC: 6 | RNVC: 9 | DAC: 9
NO PRIMARY REF 99-553-0448
RNCC: 3 | RNVC: 2 | DAC: 9
2-0WE-196788
RNCC: 3 | RNVC: 2 | DAC: 2
37396
RNCC: 3 | RNVC: 2 | DAC: 2
(241)A39630-169442
RNCC: 5 | RNVC: 2 | DAC: U
8822-750297-1
RNCC: 3 | RNVC: 2 | DAC: 2
NGTEWVCPC
RNCC: 3 | RNVC: 2 | DAC: E
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
A60025031
RNCC: 5 | RNVC: 2 | DAC: 1
2H000000-C0003
RNCC: 3 | RNVC: 2 | DAC: A
1572D005-14
RNCC: 3 | RNVC: 2 | DAC: E
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
60835757
RNCC: 5 | RNVC: 2 | DAC: 1
NO PRIMARY REF 99-853-6428
RNCC: 3 | RNVC: 2 | DAC: 9
60835830
RNCC: 3 | RNVC: 2 | DAC: 1
KDS 2350-4002
RNCC: 4 | RNVC: 1 | DAC: 3
91040305
RNCC: 3 | RNVC: 2 | DAC: 1
A81018133-02
RNCC: 5 | RNVC: 2 | DAC: 3
2H000000-C0030
RNCC: 3 | RNVC: 2 | DAC: A