1045-00-169-0724

1045-00-169-0724 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 146770. A Sub NMFC of X. It has a NMFC Description of TORPEDO TUBE MECH/PARTS IN BXS. 1045-00-169-0724 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 73340 which rates the freight between FCL and LCL. 1045-00-169-0724 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 685 for ocean manifesting and military sealift. 1045-00-169-0724 is not classified as a special type of cargo when transported by water. 1045-00-169-0724 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

Responsible Activity

Packaging Data Source

Primary Inventory Control Activity (PICA)

Packaging Data does not meet current MIL-STD-2073-1E

Storage Environment

Heated General Purpose – Heated 40 F and above

Item Pack Level (Unpackaged)

Item Size

Item Weight

Characteristics

Weight/Dimensions Category

Fragility

Item Preservation

--

--

--

Over 10lb

Less than 85G

No Requirement

Unit Pack Level (Packaged)

Quantity per Pack

Unit Size

Unit Weight

Unit Cube

Preservation Method

Cleaning/Drying

--

114.0" H x 44.0" W x 26.0" L

--

--

Physical Protection

Any Suitable Process

Preservation Material

Wrapping Material

Cushioning/Dunnage

Cushioning Thickness

Container

Special Marking

No Requirement

A-A-3174, Plastic Sheet, Polyolefin, 2mil

Cushion, Anchor, Block or Brace as Required

--

ASTM-D6251, Type III, or ASTM-D6880, Heavy or Light Duty, Determined by Shipment Destination. Provided with Nominal 2"x4" Skid. Box provided with an inspection door, located for clear reading of the humidity indicator, for Method 54 only. Inspection door shall be hinged, cleated or sealed (similar to inspection door specified in MIL-C-104). Wood and plywood boxes shall have top panels secured with wood screws and boxes banded.The top, one side, and one end of the box shall be marked "REUSABLE CONTAINER AND CUSHIONING – USE FOR RETURN OF NRFI ASSEMBLY" with black letters, minimum 2" high. In addition, mark box "TO OPEN – USE SCREWDRIVER" with one inch minimum high letters. Letter sizes may be appropriately reduced in proportion to size of container

No special marking

Intermediate Pack Level

Quantity of Unit Packs

Container

--

No Requirement