1015-14-261-3392

4730-01-697-8303 4730016978303 016978303 is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. the other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. the loose flange facilitates the alignment of the make-up bolt holes. it may have side and/or heel inlet(s).

CAGE 77037 State Of Indiana in Indianapolis, IN United States

5307-14-256-8007 5307142568007 142568007 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

5915-01-131-2763 5915011312763 011312763 is an item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. excludes filter, low pass and suppressor, ignition interference. for items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. see also limiter, electrical noise.

3442-98-200-5141 3442982005141 982005141 is a mechanical device utilizing the force which is transmitted from a pump, by means of liquid, to a cylinder containing a plunger. the resistance head member has longitudinal adjustment on horizontal tension bars.