1010-00-600-8446

9 | DAC: 9 1 Jan 1963 1005-00-612-8428 Trigger 6128428RNCC: 3 | RNVC: 2 | DAC: 1 1 Jan 1963 1010-00-600-8446

5340-99-600-8446 5340996008446 996008446 is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. the opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. may include provisions for locking. see also clevis, rod end and rod end, threaded. for items specifically designed for aviation, see connector, rod end, aviation.

5365-01-600-8446 5365016008446 016008446 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.