1010-99-962-4610

N0D3138-49 199254 Managed by United Kingdom NSN Created on 25 Apr 1991 Data Last Changed January 2023
NATO Update Count 1 NATO Data Quality NSN 1010-99-962-4610 (Generic Image) 1/1 1.
RQST NE Updated Every Day 1010-99-962-4610 RQST Updated Every Day 1010-99-962-4610 RQST NE Related Documents

Upgrade 1320-00-555-73635 Inch 38 Caliber Projectile1320005557363 005557363 273102 198984 199463 199254
- Navair And Navsea Managed Original (Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 1 199254

Upgrade 1320-00-555-75865 Inch 38 Caliber Projectile1320005557586 005557586 273102 198984 199463 199254
- Navair And Navsea Managed Original (Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 1 199254

5365-14-351-0148 5365143510148 143510148 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

5310-00-555-4428 5310005554428 005554428 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.