1010-15-005-2258

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Cartridge Extractor (INC 26839) Sep 1983 1010-15-005-2258

5305-37-507-2209 5305375072209 375072209

5310-14-507-2209 5310145072209 145072209

5310-14-507-2209 5310145072209 145072209 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2008 1015-15-064-0874 Cartridge Extractor 14956 A.E.PRNCC: 3 | RNVC: 2 | DAC: 1 20 Sep 1983 1010-15-005-2258