1010-12-170-7308

www.nsnlookup.com /fsg-10/fsc-1010 Guns, over 30mm up to 75mm from Germany (DE) 2 | DAC: 5 30 May 1969 1010-12-170-7308

10 Mar 1977 1010-12-135-0515 Entladehaken 1098001-00-03RNCC: 5 | RNVC: 2 | DAC: 5 30 May 1969 1010-12-170-7308

5310-01-633-5267 5310016335267 016335267 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5325-00-633-5267 5325006335267 006335267

4935-99-633-5267 4935996335267 996335267 TAPE LOOP,PREPUNCHE