What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 90 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 90 of 125

1005-00-169-0904
Inner Cylinder Ring

001690904
AC07110: RNCC: 3 | RNVC: 2
7R159: RNCC: 5 | RNVC: 2
7R9640687: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0899
Cam Lever

001690899
D5E11657-161: RNCC: 3 | RNVC: 2
7R9640754: RNCC: 5 | RNVC: 2
7R284: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0895
Cylinder Bree Shaft

001690895
D5E11331-161: RNCC: 3 | RNVC: 2
7R9640756: RNCC: 5 | RNVC: 2
7R282: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0884
Cradle Contact

001690884
P3-18992S161: RNCC: 3 | RNVC: 2
7R9640848: RNCC: 5 | RNVC: 2
7R791: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0866
Ceiling Bree Sleeve

001690866
D5E12205-161: RNCC: 3 | RNVC: 2
7R9640738: RNCC: 5 | RNVC: 2
7R310: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0856
Lever Cam Plunger

001690856
D5E9317-161: RNCC: 3 | RNVC: 2
7R4: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0830
Rh Rear Slide

001690830
D5E9233-161: RNCC: 3 | RNVC: 2
7R9640695: RNCC: 5 | RNVC: 2
7R98: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0827
Spring Return Tube

001690827
7R9638675: RNCC: 3 | RNVC: 2
D5E9228-161: RNCC: 5 | RNVC: 2
7R84: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0829
Connecting Rod

001690829
D5E9232-161: RNCC: 3 | RNVC: 2
00-169-0829: RNCC: 6 | RNVC: 9

8 Jan 1971

1005-00-169-0726
Gas Cylinder Boat

001690726
D5E9178-161: RNCC: 3 | RNVC: 2
7R9641303: RNCC: 5 | RNVC: 2
7R28: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0680
Cylinder Roller

001690680
D5E9159-161: RNCC: 3 | RNVC: 2
7R9638639: RNCC: 5 | RNVC: 2
7R23: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0679
Cylinder Ring

001690679
D5E9158-161: RNCC: 3 | RNVC: 2
7R9640712: RNCC: 5 | RNVC: 2
7R26: RNCC: 5 | RNVC: 2

18 Jan 1971

1005-00-169-0672
Deflector Cam

001690672
D5E9145-161: RNCC: 3 | RNVC: 2
7R9638674: RNCC: 5 | RNVC: 2
7R85: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0678
Cylinder Circlip

001690678
D5E9157-161: RNCC: 3 | RNVC: 2
7R9641068: RNCC: 5 | RNVC: 2
7R21: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-169-0673
Slide Front Cotter

001690673
D5E9146-161: RNCC: 3 | RNVC: 2
7R87: RNCC: 5 | RNVC: 2
7R9638673: RNCC: 5 | RNVC: 2

8 Jan 1971

1005-00-167-8372
Seat Ring Seal

001678372
BUWEPSDWG2537701: RNCC: 3 | RNVC: 2
2537701: RNCC: 3 | RNVC: 2
BUWEPSDWG2537701: RNCC: 5 | RNVC: 9
2471062: RNCC: C | RNVC: 1

23 Jun 1968

1005-00-167-8291
Nut Assembly

001678291
2537865: RNCC: 3 | RNVC: 2
BUWEPSDWG2537865: RNCC: 3 | RNVC: 2
2537865: RNCC: 3 | RNVC: 2
BUWEPSDWG2537865: RNCC: 5 | RNVC: 9
2537865: RNCC: 5 | RNVC: 9

17 Jun 1968

1005-00-166-8878
Stop Assy

001668878
SP29659: RNCC: 3 | RNVC: 2
SP34789: RNCC: 5 | RNVC: 2

13 Nov 1971

1005-00-166-8849
Drive Band

001668849
SP31662: RNCC: 3 | RNVC: 2
139086: RNCC: 5 | RNVC: 9

13 Nov 1971

1005-00-163-7724
Vision Block Mount

001637724
2584985: RNCC: 3 | RNVC: 2

12 Nov 1971

1005-00-161-8167
Interlock Pin

001618167
2537843: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8166
Counter Assembly

001618166
2537910: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8169
Interlock Plunger

001618169
2537846: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8165
Counter Bracket Assembly

001618165
2537907: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8164
Window Slide

001618164
2537916: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8162
Counter Cover

001618162
2537914: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-161-8163
Counter Shaft

001618163
2537913: RNCC: 3 | RNVC: 2

29 Oct 1971

1005-00-159-3535
Pod Union Adapter

001593535
CP1123-4: RNCC: 3 | RNVC: 9
A285018-23: RNCC: 5 | RNVC: 2
A285018-23: RNCC: 5 | RNVC: 9
CP1123-4: RNCC: C | RNVC: 1

11 Aug 1972

1005-00-159-3402
Lever

001593402
482494: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-3407
Retainer

001593407
BUWEPSDWG482486: RNCC: 3 | RNVC: 2
482486: RNCC: 3 | RNVC: 9
BUWEPSDWG482486: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-3401
Trigg Link Assembly

001593401
482503: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-3396
Lever

001593396
BUWEPSDWG482536: RNCC: 3 | RNVC: 2
482536: RNCC: 3 | RNVC: 2
BUWEPSDWG482536: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-3405
Housing Assembly

001593405
BUWEPSDWG482489: RNCC: 3 | RNVC: 2
482489: RNCC: 3 | RNVC: 2
BUWEPSDWG482489: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-3403
Trigger And Shaft

001593403
482492: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2616
Pod Plug

001592616
F290442: RNCC: 3 | RNVC: 9
F290442: RNCC: 5 | RNVC: 2

11 Aug 1972

1005-00-159-2615
Access Door Camloc

001592615
291687: RNCC: 3 | RNVC: 9
KM713-12-06J: RNCC: 5 | RNVC: 2
KM713-12-06J: RNCC: 5 | RNVC: 9
KM713-12-064: RNCC: 5 | RNVC: 9
291687: RNCC: C | RNVC: 1

11 Aug 1972

1005-00-159-2614
Access Door Camloc

001592614
KM713-16-051: RNCC: 3 | RNVC: 9
KM713-16-051: RNCC: 5 | RNVC: 2

11 Aug 1972

1005-00-159-2440
Pivot Housing

001592440
BUWEPSDWG492475: RNCC: 3 | RNVC: 2
492475: RNCC: 3 | RNVC: 2
BUWEPSDWG492475: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2426
Guard

001592426
BUWEPSDWG487487: RNCC: 3 | RNVC: 2
487487: RNCC: 3 | RNVC: 2
BUWEPSDWG487487: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2425
Trigger Connecting Yoke

001592425
487482: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2443
Bar

001592443
492479: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2439
Cam Limit Stop Lever

001592439
BUWEPSDWG492474: RNCC: 3 | RNVC: 2
492474: RNCC: 3 | RNVC: 2
BUWEPSDWG492474: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2432
Housing

001592432
487522: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2419
Plate

001592419
487475: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2420
Lever

001592420
BUWEPSDWG487476: RNCC: 3 | RNVC: 2
487476: RNCC: 3 | RNVC: 2
BUWEPSDWG487476: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2421
Shield

001592421
BUWEPSDWG487477: RNCC: 3 | RNVC: 2
487477: RNCC: 3 | RNVC: 2
BUWEPSDWG487477: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2214
Cocking Bar

001592214
455385: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2215
Bar

001592215
455386: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2201
Lever

001592201
BUWEPSDWG454141: RNCC: 3 | RNVC: 2
454141: RNCC: 3 | RNVC: 2
BUWEPSDWG454141: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2199
Rod

001592199
BUWEPSDWG454139: RNCC: 3 | RNVC: 2
454139: RNCC: 3 | RNVC: 2
BUWEPSDWG454139: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2200
Trigger Bar

001592200
454140: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2197
Lever

001592197
454137: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2191
Rod

001592191
BUWEPSDWG454128: RNCC: 3 | RNVC: 2
454128: RNCC: 3 | RNVC: 2
BUWEPSDWG454128: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-2193
Lever

001592193
454132: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-159-2190
Rod

001592190
BUWEPSDWG454127: RNCC: 3 | RNVC: 2
454127: RNCC: 3 | RNVC: 2
BUWEPSDWG454127: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-159-1372
Pod Axle Block

001591372
B287778-1: RNCC: 3 | RNVC: 9
B287778-1: RNCC: 5 | RNVC: 2

11 Aug 1972

1005-00-158-3740
Lever

001583740
299698PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-3748
Frame

001583748
299728PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-158-3744
Case

001583744
299697PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-3742
Lever

001583742
299698PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-3741
Trigger

001583741
29968PC3: RNCC: 3 | RNVC: 2
299698PC3: RNCC: 5 | RNVC: 2
299698PC3: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-158-3739
Trigger

001583739
299698PC6: RNCC: 3 | RNVC: 2
299698PC6: RNCC: 5 | RNVC: 2
299698PC6: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-158-2580
Plate

001582580
255395PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-2579
Roller

001582579
255395PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-2578
Carrier

001582578
255395PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1858
Spring Pilot

001581858
367534PC3: RNCC: 3 | RNVC: 2
6280-74: RNCC: 5 | RNVC: 2
367534PC3: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-158-1690
Rod

001581690
367516PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1697
Housing

001581697
365904PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-158-1678
Plunger

001581678
299943PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1691
Rod And Hand

001581691
367516PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1650
Foresight

001581650
300019PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1641
Ammunition Drum Assembly

001581641
BUWEPSDWG300022: RNCC: 3 | RNVC: 2
300022: RNCC: 3 | RNVC: 9
BUWEPSDWG300022: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-158-1640
Sight

001581640
300022PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1637
Drum

001581637
300022PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-1638
Spring

001581638
300022PC2: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-158-0090
Bar

001580090
299701PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-158-0089
Front Ferrule

001580089
299701PC4: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-158-0085
Ring And Wire Assem

001580085
299702PC90: RNCC: 3 | RNVC: 2
299702: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-8023
Support

001578023
299897PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-8049
Rod Assembly

001578049
299817PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7949
Piece Stop

001577949
299705PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7951
Eyepiecee

001577951
299705PC1: RNCC: 3 | RNVC: 2
299705-1: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-157-7952
Collar

001577952
299704PC2: RNCC: 3 | RNVC: 2
87501812: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-157-7947
Grip Weldment

001577947
299713PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7946
Shaft

001577946
299714PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7940
Feeder

001577940
299720PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7931
Block

001577931
299726PC7: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7917
Pad

001577917
299739PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7933
Mouthpiece

001577933
299725PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7935
Plate

001577935
299723PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7930
Coupling Sleve

001577930
299726PC8: RNCC: 3 | RNVC: 2
299726 PC8: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-157-7675
Gun Cover

001577675
299788PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7671
Withdrawing Head

001577671
299794PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-157-7281
Slotted Head

001577281
F187874: RNCC: 3 | RNVC: 9
F187874: RNCC: 5 | RNVC: 2
26FX780: RNCC: 5 | RNVC: 9
26FX780: RNCC: C | RNVC: 1

16 Jun 1971

1005-00-157-7235
Lid Retainer Catch

001577235
F280182: RNCC: 3 | RNVC: 9
F280182: RNCC: 5 | RNVC: 2

16 Jun 1971

1005-00-157-7179
Locking Lug

001577179
E293004-41: RNCC: 3 | RNVC: 2
STD2057-6: RNCC: 3 | RNVC: 2
E293004-41: RNCC: 3 | RNVC: 9
E293004-41: RNCC: 5 | RNVC: 2
STD2057-6: RNCC: 5 | RNVC: 9

16 Jun 1971

1005-00-157-7123
Pod Stiffnut

001577123
E293004-58: RNCC: 3 | RNVC: 9
A8600E: RNCC: 5 | RNVC: 2
E293004-58: RNCC: 5 | RNVC: 2
AS8600E: RNCC: 5 | RNVC: 2
A8600E: RNCC: 5 | RNVC: 9
AS8600E: RNCC: 5 | RNVC: 9

14 Jun 1971

1005-00-157-7122
Pod Stiffnut

001577122
E293004-59: RNCC: 3 | RNVC: 2
H42-3: RNCC: 3 | RNVC: 2
E293004-59: RNCC: 3 | RNVC: 9
E293004-59: RNCC: 5 | RNVC: 2
H42-3: RNCC: 5 | RNVC: 9

14 Jun 1971

1005-00-157-7120
Pod Stiffnut

001577120
E293004-61: RNCC: 3 | RNVC: 9
E293004-61: RNCC: 5 | RNVC: 2
H10-3: RNCC: 5 | RNVC: 9
26VA6034554: RNCC: 5 | RNVC: 9
H10-3: RNCC: C | RNVC: 1
26VA6034554: RNCC: C | RNVC: 1

14 Jun 1971

1005-00-157-7115
Ceiling Strip

001577115
26VA6042940: RNCC: 3 | RNVC: 9
26VA6042940: RNCC: 5 | RNVC: 2

14 Jun 1971

1005-00-157-7116
Attach Lug

001577116
F286307: RNCC: 3 | RNVC: 9
F286307: RNCC: 5 | RNVC: 2

14 Jun 1971

1005-00-157-7101
Door Assembly

001577101
B286097: RNCC: 3 | RNVC: 9
B286097: RNCC: 5 | RNVC: 2

14 Jun 1971

1005-00-157-7097
Pod Spigot

001577097
F286809: RNCC: 3 | RNVC: 9
F286809: RNCC: 5 | RNVC: 2

14 Jun 1971

1005-00-157-7110
Pod Spigot

001577110
F286326: RNCC: 3 | RNVC: 9
F286326: RNCC: 5 | RNVC: 2

14 Jun 1971

1005-00-157-5883
Resistance Assembly

001575883
P3-18418S384: RNCC: 3 | RNVC: 9
7R758: RNCC: 5 | RNVC: 2
P3-18418S384: RNCC: C | RNVC: 1

28 Apr 1971

1005-00-157-5846
Locking Lever

001575846
D5E11955ITEMG-J: RNCC: 3 | RNVC: 2
7R373: RNCC: 5 | RNVC: 2
7R373: RNCC: 5 | RNVC: 9
7R373: RNCC: 5 | RNVC: 9
00-157-5846: RNCC: 6 | RNVC: 9

28 Apr 1971

1005-00-157-5824
Lead Adapter

001575824
GAR1313-19: RNCC: 3 | RNVC: 2
7R542: RNCC: 5 | RNVC: 2
7R542: RNCC: 5 | RNVC: 9

28 Apr 1971

1005-00-157-5464
Guide Plate

001575464
7R9640720: RNCC: 3 | RNVC: 2
D5E10534-161: RNCC: 5 | RNVC: 2
7R265: RNCC: 5 | RNVC: 2
D5E10534: RNCC: 5 | RNVC: 2
7R265: RNCC: 5 | RNVC: 2
7R265: RNCC: 5 | RNVC: 9
7R265: RNCC: 5 | RNVC: 9

16 Apr 1971

1005-00-157-5467
Plug

001575467
10H0560270: RNCC: 3 | RNVC: 9
10H0560270: RNCC: 5 | RNVC: 2
10H0560270: RNCC: 5 | RNVC: 2

16 Apr 1971

1005-00-157-5447
Head Indicator

001575447
7R239: RNCC: 3 | RNVC: 9
7R239: RNCC: 5 | RNVC: 2
7R239: RNCC: 5 | RNVC: 2
D5E9711-161: RNCC: 5 | RNVC: 2

16 Apr 1971

1005-00-157-5399
Plunger Bar

001575399
7R122: RNCC: 3 | RNVC: 9
7R122: RNCC: 5 | RNVC: 2
00-157-5399: RNCC: 6 | RNVC: 9

16 Apr 1971

1005-00-157-5401
Gun Indicator

001575401
7R238: RNCC: 3 | RNVC: 9
7R238: RNCC: 5 | RNVC: 2
D5E9712-161: RNCC: 5 | RNVC: 2
7R238: RNCC: 5 | RNVC: 2

16 Apr 1971

1005-00-157-5378
Recoil Spindle

001575378
7R104: RNCC: 3 | RNVC: 2
D5E9166-161: RNCC: 5 | RNVC: 2
7R104: RNCC: 5 | RNVC: 2
7R104: RNCC: 5 | RNVC: 9
7R104: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5380
Recoil Cap

001575380
7R9638669: RNCC: 3 | RNVC: 2
7R100: RNCC: 3 | RNVC: 2
D5E9163-161: RNCC: 5 | RNVC: 2
7R100: RNCC: 5 | RNVC: 2
7R100: RNCC: 5 | RNVC: 9
7R100: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5376
Indicator Plunger

001575376
7R9638651: RNCC: 3 | RNVC: 2
D5E9713-161: RNCC: 3 | RNVC: 2
7R240: RNCC: 3 | RNVC: 2
7R240: RNCC: 5 | RNVC: 2
7R240: RNCC: 5 | RNVC: 9
7R240: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5374
Rod Handle

001575374
7R9638660: RNCC: 3 | RNVC: 2
7R136: RNCC: 3 | RNVC: 2
D5E9241-161: RNCC: 5 | RNVC: 2
7R136: RNCC: 5 | RNVC: 2
7R136: RNCC: 5 | RNVC: 9
7R136: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5326
Right Hand Plate

001575326
7R9638641: RNCC: 3 | RNVC: 2
7R263: RNCC: 3 | RNVC: 2
D5E10537-161: RNCC: 5 | RNVC: 2
7R263: RNCC: 5 | RNVC: 2
7R263: RNCC: 5 | RNVC: 9
7R263: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5329
Locking Rod

001575329
7R9638659: RNCC: 3 | RNVC: 2
7R141: RNCC: 3 | RNVC: 2
D5E9245-161: RNCC: 5 | RNVC: 2
7R141: RNCC: 5 | RNVC: 2
7R141: RNCC: 5 | RNVC: 9
7R141: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-5299
Gun Gas Cylinder Piston

001575299
7R9639954: RNCC: 3 | RNVC: 2
7R150: RNCC: 5 | RNVC: 2
AC09111: RNCC: 5 | RNVC: 2
7R158: RNCC: 5 | RNVC: 2
7R158: RNCC: 5 | RNVC: 9
7R158: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-157-4383
Ammunition Chute

001574383
5829872-2: RNCC: 3 | RNVC: 2
5829872-2: RNCC: 5 | RNVC: 9

29 Mar 1971

1005-00-157-4342
Chuting Clip

001574342
135B6849: RNCC: 3 | RNVC: 2

26 Mar 1971

1005-00-157-1444
Gun Sight Cap

001571444
417531PC3: RNCC: 3 | RNVC: 2
417531: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-155-9705
Mounting Pin

001559705
162B8625: RNCC: 3 | RNVC: 2
162B8625: RNCC: 3 | RNVC: 2

26 Jan 1973

1005-00-152-7564
Bracket

001527564
BUWEPSDWG487485: RNCC: 3 | RNVC: 2
487485: RNCC: 3 | RNVC: 9
BUWEPSDWG487485: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-152-6586
Sight Ring Body

001526586
2587551: RNCC: 3 | RNVC: 2

6 Oct 1971

1005-00-152-6587
Sight Aperture

001526587
2586155: RNCC: 3 | RNVC: 2

18 Oct 1971

1005-00-151-2187
Strip Bearing Assembly

001512187
11691608: RNCC: 3 | RNVC: 2
1005001512187: RNCC: 6 | RNVC: 9

19 Jan 1973

1005-00-148-7772
Plunge Testing Unit

001487772
AEL1006: RNCC: 3 | RNVC: 2

14 Mar 1973

1005-00-148-7528
Automatic Caliber .22 Pistol

001487528
RUGERM0DEL1: RNCC: 3 | RNVC: 2

6 Feb 1974

1005-00-148-6528
Automatic Caliber .45 Pistol

001486528
M1911A1MATCHA: RNCC: 3 | RNVC: 2

11 Nov 1973

1005-00-148-6531
Automatic Caliber .45 Pistol

001486531
M1911A1MATCHC: RNCC: 3 | RNVC: 2

11 Nov 1973

1005-00-148-6532
7.62 Millimeter Rifle

001486532
7-62MMMATCHA: RNCC: 3 | RNVC: 2

11 Nov 1973

1005-00-148-6530
Automatic Caliber .45 Pistol

001486530
M1911A1MATCHB: RNCC: 3 | RNVC: 2

11 Nov 1973

1005-00-148-6527
Automatic Caliber .22 Pistol

001486527
9248: RNCC: 3 | RNVC: 9

11 Nov 1973

1005-00-148-6464
Drive Unit Assembly

001486464
189F317: RNCC: 3 | RNVC: 2

6 Oct 1973

1005-00-148-6444
Spring Locking Pin

001486444
28P5414: RNCC: 3 | RNVC: 2

3 Oct 1973

1005-00-148-6440
Upper Leaf

001486440
P3-17338-161: RNCC: 3 | RNVC: 2
7R650: RNCC: 5 | RNVC: 2

3 Oct 1973

1005-00-148-0402
Ammunition Chute Adapter

001480402
11691374: RNCC: 3 | RNVC: 2

24 Sep 1971

1005-00-146-9669
Top Front Boot Retainer

001469669
2587572: RNCC: 3 | RNVC: 2

15 Sep 1971

1005-00-146-9675
Shoulder Gun Stock Butt Plate

001469675
2587571: RNCC: 3 | RNVC: 2
2587571: RNCC: 5 | RNVC: 2
2587571: RNCC: 5 | RNVC: 2

15 Sep 1971

1005-00-146-9654
Traverse Mechanism

001469654
28108: RNCC: 3 | RNVC: 2
2588309: RNCC: 3 | RNVC: 2

15 Sep 1971

1005-00-146-9356
Window Mask

001469356
2537918: RNCC: 3 | RNVC: 2

15 Sep 1971

1005-00-146-5427
Rear Sight

001465427
S2407-607128PC29: RNCC: 3 | RNVC: 2
5206: RNCC: 5 | RNVC: 2
607127-29: RNCC: 5 | RNVC: 2
S2407-607127-29: RNCC: 5 | RNVC: 2
NEMS6: RNCC: 5 | RNVC: 2
48NEMS: RNCC: 5 | RNVC: 9
N264: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-141-0167
Gun Pin

001410167
328161-3: RNCC: 3 | RNVC: 2

10 Sep 1971

1005-00-140-7661
La Adapter Assembly

001407661
2842400: RNCC: 3 | RNVC: 2
2846669: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7660
Gu Adapter Assembly

001407660
2842404: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7659
Gun Cradle Assembly

001407659
439936-1: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7658
Gun Shield

001407658
2841947-1: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7632
Gu Bracket Assembly

001407632
439948: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7643
Gun Stand Assembly

001407643
2846723: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7638
G Carriage Assembly

001407638
439974: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7640
Gun Cradle Assembly

001407640
2657577: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7625
Train Stop

001407625
2866414: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7623
1 Mark 18 Cradle

001407623
439936-2: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-7624
G Carriage Assembly

001407624
439937: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-140-4999
Torque Ring Assembly

001404999
SP28283: RNCC: 3 | RNVC: 2

25 Aug 1971

1005-00-140-3978
Boresight Block

001403978
101D4628-2: RNCC: 3 | RNVC: 2

10 Aug 1973

1005-00-140-3977
Gun Support Post

001403977
105D3368: RNCC: 3 | RNVC: 2
A51K10618-11: RNCC: 5 | RNVC: 9
A51K10618-13: RNCC: 5 | RNVC: 9
A51K10618-13: RNCC: E | RNVC: 8
116C3739: RNCC: E | RNVC: 8

10 Aug 1973

1005-00-140-2431
Ammunition Chute

001402431
2587455: RNCC: 1 | RNVC: 2
S50-1200-4: RNCC: 3 | RNVC: 2
S50-1200-4: RNCC: 5 | RNVC: 9

21 Aug 1971

1005-00-140-2435
Con Switch Assembly

001402435
SP28793: RNCC: 3 | RNVC: 2

21 Aug 1971

1005-00-140-2433
Control Handle Trigger

001402433
SP29431: RNCC: 3 | RNVC: 2

21 Aug 1971

1005-00-139-7673
Spring Stop

001397673
SP28313: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7668
Travers Torsion Bar

001397668
SP28277: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7667
Travel Coil Assembly

001397667
SP28148: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7639
Ammunition Chute Guide

001397639
2587557: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7638
Ammunition Chute Adapter

001397638
2587993: RNCC: 1 | RNVC: 2
S50-1265-2: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7637
Ammunition Chute Adapter

001397637
2587521: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-7652
Last Round Stop Lever

001397652
2587427: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6178
Drum Assembly

001396178
A51K9040-1: RNCC: 1 | RNVC: 3
101D4584: RNCC: 3 | RNVC: 3

18 Aug 1971

1005-00-139-6182
Drive Unit Assembly

001396182
188F848: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6179
Inner Drum

001396179
211F843-40: RNCC: 3 | RNVC: 2
188F698: RNCC: 5 | RNVC: 9

18 Aug 1971

1005-00-139-6181
Purge Adapter

001396181
116C3796: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6180
Scoop Disk Retainer

001396180
135B6825: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6176
Boresight Block

001396176
116C3772: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6168
Transfer Unit End Assembly

001396168
1311C6672-5: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-6175
Block Support

001396175
116C3771: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-5613
Support Assembly

001395613
2580466: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-5615
Bracket Handle

001395615
2580458: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-5612
Flash Tube

001395612
2580481: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-5605
Pintle

001395605
2663144: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-139-5597
Carriage

001395597
2866357: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-138-8529
Gun Gas Diverter Chamber Assembly

001388529
A51K10607-7: RNCC: 3 | RNVC: 2
A51K10607-7: RNCC: 3 | RNVC: 9
A51K10607-7: RNCC: 5 | RNVC: 9
A51K10607-5: RNCC: 5 | RNVC: 9

14 Dec 1974

1005-00-138-3589
Pod Cone

001383589
KB956K0025-000: RNCC: 3 | RNVC: 9
KB956K0025-000: RNCC: 5 | RNVC: 2

14 Dec 1974

1005-00-138-3018
Ammun Magazine Assy

001383018
20075: RNCC: 3 | RNVC: 2
6034: RNCC: 5 | RNVC: 9
2508059: RNCC: C | RNVC: 1
19022: RNCC: C | RNVC: 1

24 Jul 1971

1005-00-137-8427
Feed Ramp Assembly

001378427
101D4266: RNCC: 3 | RNVC: 2

21 Jul 1971

1005-00-136-5330
Quick Release Plate

001365330
BUWEPSDWG2813711: RNCC: 3 | RNVC: 2
2813711: RNCC: 3 | RNVC: 2
BUWEPSDWG2813711: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5327
Electrical Box Asse

001365327
BUWEPSDWG2842808: RNCC: 3 | RNVC: 2
2842808: RNCC: 3 | RNVC: 2
BUWEPSDWG2842808: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5320
Plastic Cover

001365320
BUWEPSDWG2659622: RNCC: 3 | RNVC: 2
2659622: RNCC: 3 | RNVC: 2
BUWEPSDWG2659622: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5324
Ammunition Box Feed Throat

001365324
BUWEPSDWG2680764: RNCC: 3 | RNVC: 2
2680764: RNCC: 3 | RNVC: 2
BUWEPSDWG2680764: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5315
After Gun Plate

001365315
BUWEPSDWG2813713: RNCC: 3 | RNVC: 2
2813713: RNCC: 3 | RNVC: 2
BUWEPSDWG2813713: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5314
Forward Gun Plate

001365314
BUWEPSDWG2813718: RNCC: 3 | RNVC: 2
2813718: RNCC: 3 | RNVC: 2
BUWEPSDWG2813718: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5312
Post Sight Assembly

001365312
BUWEPSDWG2615035: RNCC: 3 | RNVC: 2
2615035: RNCC: 3 | RNVC: 2
BUWEPSDWG2615035: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5311
Rear Sight

001365311
BUWEPSDWG2615026: RNCC: 3 | RNVC: 2
2615026: RNCC: 3 | RNVC: 2
BUWEPSDWG2615026: RNCC: 5 | RNVC: 2
BUWEPSDWG2615026: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5303
Carriage Base

001365303
BUWEPSDWG2659411: RNCC: 3 | RNVC: 2
2659411: RNCC: 3 | RNVC: 2
BUWEPSDWG2659411: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5302
Carriage Suppo Base

001365302
BUWEPSDWG2659441: RNCC: 3 | RNVC: 2
2659441: RNCC: 3 | RNVC: 2
BUWEPSDWG2659441: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5299
Crosshead Rocker

001365299
BUWEPSDWG2658421: RNCC: 3 | RNVC: 2
2658421: RNCC: 3 | RNVC: 2
BUWEPSDWG2658421: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-5297
Handlebar Control

001365297
BUWEPSDWG2813951: RNCC: 3 | RNVC: 2
2813951: RNCC: 3 | RNVC: 2
BUWEPSDWG2813951: RNCC: 5 | RNVC: 9

17 Jan 1969

1005-00-136-2287
Chute To Gu Adapter

001362287
104498: RNCC: 3 | RNVC: 2

15 Jan 1969

1005-00-136-2273
Gun Position Handle

001362273
104348: RNCC: 3 | RNVC: 2

15 Jan 1969

1005-00-135-9314
Gun Cable Assembly

001359314
2812174: RNCC: 3 | RNVC: 2
50915-40118-80: RNCC: 5 | RNVC: 2
BUWEPSDWG2812174: RNCC: 5 | RNVC: 9
BUWEPSDWG2812174: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9311
Gun Cable Assembly

001359311
50915-40118-130: RNCC: 3 | RNVC: 2

10 Jan 1969

1005-00-135-9276
Trigger Switch Lever

001359276
2811946: RNCC: 3 | RNVC: 2
50915-40023: RNCC: 5 | RNVC: 9
BUWEPSDWG2811946: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9277
Trigger Switch Rod

001359277
2811886: RNCC: 3 | RNVC: 2
50915-40024-1: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9278
Trigger Switch Rod

001359278
2811887: RNCC: 3 | RNVC: 2
50915-40024-2: RNCC: 5 | RNVC: 9
BUWEPSDWG2811887: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9273
Switch-Elevation Drive Housing

001359273
2811967: RNCC: 3 | RNVC: 2
BUWEPSDWG2811967: RNCC: 5 | RNVC: 9
50915-40064: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9272
Handgrip Bar

001359272
50915-40321: RNCC: 3 | RNVC: 9

10 Jan 1969

1005-00-135-9267
Gun Mount Endcap

001359267
2811930: RNCC: 3 | RNVC: 2
BUWEPSDWG2811930: RNCC: 5 | RNVC: 9
50915-40006: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9255
Drive Retainer Plate

001359255
2811894: RNCC: 3 | RNVC: 2
50915-40080-4: RNCC: 5 | RNVC: 9
BUWEPSDWG2811894: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9250
Crank Assembly

001359250
2811959: RNCC: 3 | RNVC: 2
BUWEPSDWG2811959: RNCC: 5 | RNVC: 9
50915-40026-10: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9244
Slip Ring Wiper Assembly

001359244
2811899: RNCC: 3 | RNVC: 2
50915-40130: RNCC: 5 | RNVC: 9
50915-40130-10: RNCC: 5 | RNVC: 9
BUWEPSDWG2811899: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9230
Gun Mounting Adapter

001359230
2812152-10: RNCC: 3 | RNVC: 2
50915-40050-10: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9219
Hatch Spring Clip

001359219
2812052: RNCC: 3 | RNVC: 2
50915-40179: RNCC: 5 | RNVC: 9
BUWEPSDWG2812052: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9226
Seat Liner

001359226
2812145: RNCC: 3 | RNVC: 2
BUWEPSDWG2812145: RNCC: 5 | RNVC: 9
50915-40150-40: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9222
Seal Assembly

001359222
2812070: RNCC: 3 | RNVC: 2
BUWEPSDWG2812070: RNCC: 5 | RNVC: 9
50915-40004-10: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9220
Sight Bracket Assembly

001359220
2812062: RNCC: 3 | RNVC: 2
BUWEPSDWG2812062: RNCC: 5 | RNVC: 9
50915-40106-10: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9216
Exhau Ring Assembly

001359216
2812032: RNCC: 3 | RNVC: 2
BUWEPSDWG2812032: RNCC: 5 | RNVC: 9
50915-40159: RNCC: 5 | RNVC: 9
50915-40159-10: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9207
Gun Moun Gear Guard

001359207
2811994-2: RNCC: 3 | RNVC: 2
50915-40087-2: RNCC: 5 | RNVC: 9
BUWEPSDWG281199: RNCC: C | RNVC: 1

10 Jan 1969

1005-00-135-9208
Cradle Trunnion Pin

001359208
2811997: RNCC: 3 | RNVC: 2
BUWEPSDWG2811997: RNCC: 5 | RNVC: 9
50915-40102: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9197
Gun Operating Rod Assembly

001359197
2811907: RNCC: 3 | RNVC: 2
BUWEPSDWG2811903: RNCC: 5 | RNVC: 9
BUWEPSDWG2811907: RNCC: 5 | RNVC: 9
50915-40125-20: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9203
Gun Mount Hinge

001359203
2811960: RNCC: 3 | RNVC: 2
BUWEPSDWG2811960: RNCC: 5 | RNVC: 9
50915-40043-20: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-9199
Vision Blo Retainer

001359199
2811928: RNCC: 3 | RNVC: 2
BUWEPSDWG2811928: RNCC: 5 | RNVC: 2
50915-40173-20: RNCC: 5 | RNVC: 9

10 Jan 1969

1005-00-135-2453
Hydraulic Pump Handle

001352453
8438267: RNCC: 3 | RNVC: 2

2 Jan 1969

1005-00-134-9480
Forward Gu Mounting

001349480
D291683: RNCC: 3 | RNVC: 9
D291683: RNCC: 5 | RNVC: 2

9 Aug 1972

1005-00-134-9468
Pod Cover Plate

001349468
F302037: RNCC: 3 | RNVC: 9
F302037: RNCC: 5 | RNVC: 2

9 Aug 1972

1005-00-134-9470
Barrel Support

001349470
F292350: RNCC: 3 | RNVC: 9
F292350: RNCC: C | RNVC: 1

9 Aug 1972

1005-00-134-5164
Drum Drive Assembly

001345164
101D4551: RNCC: 3 | RNVC: 2

9 Jul 1969

1005-00-133-9448
Ammunition Chute

001339448
S12-2140-3: RNCC: 3 | RNVC: 2

20 Sep 1968

1005-00-133-9280
Caliber 38 Revolver

001339280
BUWEPSDWG2846713: RNCC: 3 | RNVC: 2
2846713: RNCC: 3 | RNVC: 2

19 Aug 1968

1005-00-133-6007
Bolt And Nut Assemb

001336007
5911079: RNCC: 3 | RNVC: 2

30 Jul 1969

1005-00-133-4487
Ammunition Chute

001334487
598511-1: RNCC: 3 | RNVC: 9

26 Dec 1968

1005-00-133-1101
Loader-Rammer Lever

001331101
8448225: RNCC: 3 | RNVC: 2

20 Dec 1968

1005-00-131-8511
Diverter Gun Gas Port

001318511
A51K10555-11: RNCC: 3 | RNVC: 2
A51K10555-11: RNCC: 3 | RNVC: 9
A51K10555-11: RNCC: 5 | RNVC: 9
A51K10609-1: RNCC: 5 | RNVC: 9

25 Sep 1974

1005-00-131-6876
Rear Sight

001316876
K12CR0SSHAIR: RNCC: 3 | RNVC: 9
GS515B1: RNCC: 5 | RNVC: 2

11 Dec 1968

1005-00-131-6230
Valve Actuating Control Handle Yoke

001316230
11644142: RNCC: 3 | RNVC: 2

11 Dec 1968

1005-00-131-1288
Bag

001311288
487503: RNCC: 3 | RNVC: 2
BUWEPSDWG487503: RNCC: 3 | RNVC: 2
BUWEPSDWG487503: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-131-1259
Adapter

001311259
454198: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-131-1260
Adapter

001311260
454199: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-131-1148
Bag

001311148
299873PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-130-5572
Valve Assembly Housing

001305572
11644351: RNCC: 3 | RNVC: 2
11644351: RNCC: 5 | RNVC: 9

6 Dec 1968

1005-00-130-5516
Spool And Sleeve Assembly

001305516
11644122: RNCC: 3 | RNVC: 2
11644122: RNCC: 5 | RNVC: 9

6 Dec 1968

1005-00-127-2982
Ejection Chute

001272982
11690407: RNCC: 3 | RNVC: 2
717025-301: RNCC: 5 | RNVC: 9

25 Nov 1968

1005-00-125-8794
Support Bracket

001258794
11599217: RNCC: 3 | RNVC: 2

15 Nov 1968

1005-00-124-3338
Fixed Hook

001243338
140-61091: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-124-1477
Folding Handle

001241477
8438233: RNCC: 3 | RNVC: 2
1005001241477: RNCC: 6 | RNVC: 9

6 Nov 1968

1005-00-124-1493
Stop Bar

001241493
8438284: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1428
Adapter Plate

001241428
8438092-2: RNCC: 3 | RNVC: 2
1005001241428: RNCC: 6 | RNVC: 9

6 Nov 1968

1005-00-124-1494
Traveling Retainer

001241494
8438290: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1443
Travel Lock Base

001241443
8438130: RNCC: 3 | RNVC: 2
1005001241443: RNCC: 6 | RNVC: 9

6 Nov 1968

1005-00-124-1438
Pin Coupling Plate

001241438
8438120: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1444
Switch Cover

001241444
8438141: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1435
Hold Down Bar

001241435
8438101-1: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1454
Seat Fitting

001241454
8438204: RNCC: 3 | RNVC: 2
1005001241454: RNCC: 6 | RNVC: 9

6 Nov 1968

1005-00-124-1442
Slotted Coupling Plate

001241442
8438121: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-124-1450
Travel Lock Clamp

001241450
8438149: RNCC: 3 | RNVC: 2

6 Nov 1968

1005-00-123-4248
Ammunition Chute Assembly

001234248
178568: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-123-0773
Machine Gun Breech Lock

001230773
30F73715-1R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-9019
Housing Subassembly

001229019
11691402: RNCC: 3 | RNVC: 2

30 May 1974

1005-00-122-7362
Ammunition Chute

001227362
174794: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-5713
Adjusting Screw Trunnion

001225713
30F73028-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-4417
Machine Gun Breech Lock

001224417
30F73715-1L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-4416
50 Caliber Trunnion

001224416
30F73716-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-4013
Fuse Chute Assembly

001224013
30F73730-1L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-4012
Fuse Chute Assembly

001224012
30F73730-1R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-122-1594
Gun Charger

001221594
5448796: RNCC: 3 | RNVC: 2

4 May 1974

1005-00-121-7605
Gu Control Assembly

001217605
175F970: RNCC: 3 | RNVC: 2

25 Oct 1968

1005-00-118-5584
Vc Treated Bore Tube

001185584
11686659: RNCC: 3 | RNVC: 2

11 Oct 1968

1005-00-117-0334
Firing Repair Kit

001170334
5911165: RNCC: 3 | RNVC: 2
1005001170334: RNCC: 6 | RNVC: 9

24 Dec 1972

1005-00-116-8525
Boresight Yoke

001168525
68C34562: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8532
Gun Nose Cone Assy

001168532
68J34597-103: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8526
Gun Tail Cone Assy

001168526
68E34616: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8531
Gun P Inboard Track

001168531
68D34575-2: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8528
Gun Outboard Track

001168528
68D34573-1: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8503
Ejection Chute

001168503
68D34593: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8501
Ammunition Chute

001168501
68C34564-5: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8502
Ejection Chute

001168502
68D34586: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8505
Ammunition Ca Cover

001168505
68D34585: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8511
Horizontal Adj Lock

001168511
68C34561: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8497
Ammunition Box Assy

001168497
68E34578-2: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8500
Ammunition Chute

001168500
68C34564-3: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-8496
Ammunition Box Assy

001168496
68E34578-1: RNCC: 3 | RNVC: 2

2 Oct 1968

1005-00-116-3413
Right Hand Lifting Lug

001163413
8438519: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3406
Lock Pin Assembly

001163406
8438503: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3394
Rh Torsion Bar

001163394
8438454: RNCC: 3 | RNVC: 2
1005001163394: RNCC: 6 | RNVC: 9

27 Sep 1968

1005-00-116-3395
Adjuster Assembly

001163395
8438458: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3404
Cable Retainer Assembly

001163404
8438497: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3401
Ammunition Chute Support

001163401
8438484: RNCC: 3 | RNVC: 2
11011103: RNCC: D | RNVC: 9

27 Sep 1968

1005-00-116-3393
Lever Arm

001163393
8438452: RNCC: 3 | RNVC: 2
1005001163393: RNCC: 6 | RNVC: 9

27 Sep 1968

1005-00-116-3391
Bushing Housing

001163391
8438436: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3383
End Plate

001163383
8438387: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-3399
Lh Torsion Bar

001163399
8438470: RNCC: 3 | RNVC: 2
1005001163399: RNCC: 6 | RNVC: 9

27 Sep 1968

1005-00-116-3382
Bearing Adapter Assembly

001163382
8438369: RNCC: 3 | RNVC: 2
1005001163382: RNCC: 6 | RNVC: 9

27 Sep 1968

1005-00-116-3363
Ammunition Chute

001163363
10870759: RNCC: 3 | RNVC: 2

27 Sep 1968

1005-00-116-0576
Clamp Base Assembly

001160576
8438408: RNCC: 3 | RNVC: 2
1005001160576: RNCC: 6 | RNVC: 9

25 Sep 1968

1005-00-116-0572
Travel Lock Latch Assembly

001160572
8438391: RNCC: 3 | RNVC: 2

25 Sep 1968

1005-00-116-0581
Pin Locator

001160581
8438428: RNCC: 3 | RNVC: 2

25 Sep 1968

1005-00-116-0561
Shield Support

001160561
8438140: RNCC: 3 | RNVC: 2

25 Sep 1968

1005-00-116-0559
Right Angle Drive Unit

001160559
134: RNCC: 3 | RNVC: 9
C-134816: RNCC: 5 | RNVC: 2
8438132: RNCC: 5 | RNVC: 2
1005001160559: RNCC: 6 | RNVC: 9

25 Sep 1968

1005-00-116-0555
Seat Lever

001160555
8438051: RNCC: 3 | RNVC: 2

25 Sep 1968

1005-00-115-7921
Elevating And Firing Cradle Support

001157921
216-29413-1: RNCC: 3 | RNVC: 2

20 Sep 1968

1005-00-115-7922
Boresight Block

001157922
216-29411-2: RNCC: 3 | RNVC: 2

20 Sep 1968

1005-00-115-4445
Sector Gear Pin

001154445
8438399: RNCC: 3 | RNVC: 2
1005001154445: RNCC: 6 | RNVC: 9

20 Sep 1968

1005-00-115-4442
Switch And Lead As

001154442
8437717: RNCC: 3 | RNVC: 2
1005-115-4442: RNCC: 6 | RNVC: 9
1005001154442: RNCC: 6 | RNVC: 9

20 Sep 1968

1005-00-115-4435
Ejection Chute

001154435
11690409: RNCC: 3 | RNVC: 2
717015-307: RNCC: 5 | RNVC: 9

20 Sep 1968

1005-00-115-2607
Lanyard Assembly

001152607
8447994: RNCC: 3 | RNVC: 2

16 Sep 1968

1005-00-114-5251
Adapte Housing Assy

001145251
189F261: RNCC: 3 | RNVC: 2

20 Dec 1972

1005-00-113-9657
Empty Cartridge Bag

001139657
11643641: RNCC: 3 | RNVC: 2

9 Sep 1968

1005-00-113-6208
Main Gear Assembly

001136208
216-29220-5: RNCC: 1 | RNVC: 3
176F860: RNCC: 3 | RNVC: 3
176F860: RNCC: 5 | RNVC: 9

14 Mar 1973

1005-00-112-2952
Sponson Rear Mount Slide

001122952
300-610147-5: RNCC: 3 | RNVC: 9

23 Aug 1968

1005-00-112-2955
Adjustable Stop

001122955
68B5095: RNCC: 3 | RNVC: 2

23 Aug 1968

1005-00-111-4666
Ammunition Chute Assembly

001114666
8437761: RNCC: 3 | RNVC: 2

16 Aug 1968

1005-00-110-7201
Top Link Elevation

001107201
204R497-15: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7199
Gun Yoke Assembly

001107199
204R497-4: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7167
Matched Azimuth Adjustment Pivot

001107167
116C3196: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7162
Bracket Assembly

001107162
67F4571: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7166
Azimuth Anchor

001107166
116C3195: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7165
Azimuth Adjuster

001107165
125C2751: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-110-7126
Loading Hole Plug

001107126
116C2771-2: RNCC: 3 | RNVC: 2
116C2771: RNCC: 5 | RNVC: 9

9 Aug 1968

1005-00-110-4099
Ejection Chute

001104099
8447625: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-109-8894
Magazine Assembly

001098894
5829870-505: RNCC: 3 | RNVC: 2

31 Jan 1973

1005-00-109-8833
Magazine Assembly

001098833
5829870-507: RNCC: 3 | RNVC: 2

31 Jan 1973

1005-00-107-5582
Aircraft Adapter Assembly

001075582
189F292: RNCC: 3 | RNVC: 2

21 Oct 1972

1005-00-107-2504
Drive Asse Retainer

001072504
8436968: RNCC: 3 | RNVC: 2
1005-107-2504: RNCC: 6 | RNVC: 9
1005001072504: RNCC: 6 | RNVC: 9

24 Jul 1968

1005-00-107-2468
Azimuth Adjuster

001072468
135B6365: RNCC: 3 | RNVC: 2

24 Jul 1968

1005-00-106-9280
Gun Mount Yoke Pin

001069280
116C3194: RNCC: 3 | RNVC: 2

19 Jul 1968

1005-00-106-9283
Slide Elevati Block

001069283
114C2977: RNCC: 3 | RNVC: 2

19 Jul 1968

1005-00-106-9282
Slide Elevati Block

001069282
125C2946: RNCC: 3 | RNVC: 2

19 Jul 1968

1005-00-106-8524
Gun Spring Clip

001068524
2537710: RNCC: 3 | RNVC: 2

18 Sep 1972

1005-00-106-8523
Gun Buffer Sleeve

001068523
1722317: RNCC: 3 | RNVC: 2
1722317: RNCC: 3 | RNVC: 2

18 Sep 1972

1005-00-106-8484
Deflector Assembly

001068484
11691588: RNCC: 3 | RNVC: 2

5 Sep 1972

1005-00-106-8483
Bracket Gun Mount

001068483
11691381: RNCC: 3 | RNVC: 2

5 Sep 1972

1005-00-106-8482
Bracket Gun Mount

001068482
11691380: RNCC: 3 | RNVC: 2

5 Sep 1972

1005-00-106-8485
Mount Pintle

001068485
11691324: RNCC: 3 | RNVC: 2
392AS249: RNCC: C | RNVC: 1
11691324: RNCC: C | RNVC: 1
3392AS249: RNCC: C | RNVC: 1

5 Sep 1972

1005-00-106-8481
Bracket Gun Mount

001068481
11691379: RNCC: 3 | RNVC: 2

5 Sep 1972

1005-00-105-9008
Feed Mechanical Spacer

001059008
116C3227: RNCC: 3 | RNVC: 2

5 Jul 1968

1005-00-105-6726
Drive Lever

001056726
330930: RNCC: 3 | RNVC: 2

3 Jul 1968

1005-00-105-2845
Counter Assembly

001052845
8437790: RNCC: 3 | RNVC: 2
1005001052845: RNCC: 6 | RNVC: 9

1 Jul 1968

1005-00-105-1083
Gun System Exit Unit

001051083
175F846: RNCC: 3 | RNVC: 2

26 Jun 1968

1005-00-105-1079
Ammunition Chute

001051079
905D370-4: RNCC: 3 | RNVC: 2

26 Jun 1968

1005-00-104-8276
Rounds Limiter

001048276
175F806: RNCC: 3 | RNVC: 2

23 Jun 1968

1005-00-104-7288
Ammunition Handling Sprocket

001047288
114C2965: RNCC: 3 | RNVC: 2

23 Jun 1968

1005-00-104-4618
Machine Gun-Automatic Gun Ammunition Feeder

001044618
8447857: RNCC: 3 | RNVC: 2

19 Jun 1968

1005-00-104-4619
Machine Gun-Automatic Gun Ammunition Feeder

001044619
8447858: RNCC: 3 | RNVC: 2

19 Jun 1968

1005-00-103-7281
Chuting Clip

001037281
125C2870: RNCC: 3 | RNVC: 2

12 Jun 1968

1005-00-103-7280
Ammunition Support Assy

001037280
114C2968: RNCC: 3 | RNVC: 2

12 Jun 1968

1005-00-103-2749
Special Shim

001032749
135B6265: RNCC: 3 | RNVC: 2

7 Jun 1968

1005-00-103-1393
Ammunition Guide

001031393
175F603: RNCC: 3 | RNVC: 2

5 Jun 1968

1005-00-103-1394
Ammunition Gate

001031394
905D532: RNCC: 3 | RNVC: 2

5 Jun 1968

1005-00-102-7985
Cartridge Stop

001027985
905D562: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7988
Ammunition Feed Electrohydraulic Drive Assembly

001027988
175F697: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7984
Ammunition Cartridge Guide

001027984
905D552: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7987
Ammunition Feed Electrohydraulic Drive Assembly

001027987
216-29220-3: RNCC: 1 | RNVC: 3
175F705: RNCC: 3 | RNVC: 3

31 May 1968

1005-00-102-7982
Small Arms Cartridge Guide

001027982
905D514: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7981
Transfer Wear Plate

001027981
905D242: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7969
Guide Mount Plate

001027969
135B5849-1: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7967
Chuting Clip

001027967
125C2871: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7970
Guide Mount Plate

001027970
135B5849-2: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7961
Ammunition Chute Adapter

001027961
114C2952: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7964
Ammunition Chute Adapter

001027964
114C2962: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7952
Drum Drive Assembly

001027952
905D558: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7954
Ammunition Feed Electrohydraulic Drive Assembly

001027954
175F657: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7953
Drum Drive Housing

001027953
175F672: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7949
Ammunition Chute Adapter

001027949
905D533: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7951
Aircraft Armament Pod Adapter

001027951
905D241: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7950
Fwd Ammunition Gate

001027950
905D531: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7948
Aft Gate

001027948
125C2850: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-102-7946
Ammunition Rounds Stop

001027946
905D557: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-100-4102
Ejection Chute

001004102
11700067: RNCC: 3 | RNVC: 2

24 May 1968

1005-00-099-9812
Carrier Assembly

000999812
143-2017: RNCC: 3 | RNVC: 2
V51114: RNCC: 5 | RNVC: 2
143-2017: RNCC: 5 | RNVC: 2
143-2017: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-091-7513
Gun Mount Support

000917513
3443735: RNCC: 3 | RNVC: 2
3343735: RNCC: 5 | RNVC: 2
34433735: RNCC: 5 | RNVC: 2
3443735: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-091-7508
Tube-Boresight

000917508
2446271: RNCC: 3 | RNVC: 2
2446271: RNCC: 5 | RNVC: 9

1 Jan 1956

1005-00-079-3248
Sponson Locking Shaft

000793248
300-610150: RNCC: 3 | RNVC: 9

4 Dec 1967

1005-00-075-0919
Ring Assembly

000750919
CV15-409058-7: RNCC: 3 | RNVC: 2
CV15-409058-9: RNCC: 5 | RNVC: 2
CV15-409058-10: RNCC: 5 | RNVC: 2
CV15-409058-8: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-072-5384
Small Arms Sling Swivel

000725384
7791670: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-070-0937
Shift Pin Handle

000700937
8436949: RNCC: 3 | RNVC: 2
1005000700937: RNCC: 6 | RNVC: 9

13 Jul 1967

1005-00-070-0951
Reactor Assembly

000700951
8437445: RNCC: 3 | RNVC: 2
1005-070-0951: RNCC: 6 | RNVC: 9
1005000700951: RNCC: 6 | RNVC: 9

13 Jul 1967

1005-00-070-0954
Sprocket Wheel Asse

000700954
11687067: RNCC: 3 | RNVC: 2

13 Jul 1967

1005-00-070-0935
Clutch Retainer

000700935
8436929: RNCC: 3 | RNVC: 2
1005000700935: RNCC: 6 | RNVC: 9

13 Jul 1967

1005-00-070-0944
Azimuth Switch Assembly

000700944
8437157: RNCC: 3 | RNVC: 2
1005-070-0944: RNCC: 6 | RNVC: 9
1005000700944: RNCC: 6 | RNVC: 9

13 Jul 1967

1005-00-070-0910
Vads Foot Switch Assembly

000700910
10545607: RNCC: 3 | RNVC: 2
1005-070-0910: RNCC: 6 | RNVC: 9
1005000700910: RNCC: 6 | RNVC: 9

13 Jul 1967

1005-00-066-7927
Firing Circuit Body

000667927
8401824: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-066-4237
Ejection Chute

000664237
219-61072: RNCC: 3 | RNVC: 2
219-61072: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-066-4232
Axle-Gun Pod Roller

000664232
219-61056: RNCC: 3 | RNVC: 9

1 Jan 1961

1005-00-066-4230
Ammunition Chute

000664230
219-61066: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-064-5649
Wire Splice

000645649
YQE91: RNCC: 3 | RNVC: 2
8427801: RNCC: 5 | RNVC: 2
YQE91: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-061-5572
Chute Clamp Assembly

000615572
531662-1: RNCC: 3 | RNVC: 9

15 Jun 1967

1005-00-060-0999
Empty Cartridge Bag

000600999
65751-03048-041: RNCC: 3 | RNVC: 2

8 Jun 1967

1005-00-060-0941
Ammunition Chute

000600941
S762-1300-2: RNCC: 3 | RNVC: 2
HE190-9003-0005: RNCC: 5 | RNVC: 9

8 Jun 1967

1005-00-060-0943
Ammunition Chute

000600943
S762-1300-3: RNCC: 3 | RNVC: 2

8 Jun 1967

1005-00-060-0944
Ammunition Chute

000600944
S762-1300-1: RNCC: 3 | RNVC: 2
HE190-9003-0001: RNCC: 5 | RNVC: 9

8 Jun 1967

1005-00-056-8974
Loader Lock

000568974
1700675: RNCC: 3 | RNVC: 2

30 May 1967

1005-00-056-8936
Sprocket Lock Slide

000568936
BUWEPSDWG1633996: RNCC: 3 | RNVC: 2
1633996: RNCC: 3 | RNVC: 2
BUWEPSDWG1633996: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8941
Sear Link

000568941
BUWEPSDWG2471254: RNCC: 3 | RNVC: 2
2471254: RNCC: 3 | RNVC: 2
BUWEPSDWG2471254: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8927
Declutch Rod Stop

000568927
BUWEPSDWG2248417: RNCC: 3 | RNVC: 2
2248417: RNCC: 3 | RNVC: 2
BUWEPSDWG2248417: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8905
Declutch Piston

000568905
BUWEPSDWG1633936: RNCC: 3 | RNVC: 2
1633936: RNCC: 3 | RNVC: 2
BUWEPSDWG1633936: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8904
Declutch Gun Po Cam

000568904
BUWEPSDWG1633931: RNCC: 3 | RNVC: 2
1633931: RNCC: 3 | RNVC: 2
BUWEPSDWG1633931: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8907
Declutch Cylinder

000568907
BUWEPSDWG1633937: RNCC: 3 | RNVC: 2
1633937: RNCC: 3 | RNVC: 2
BUWEPSDWG1633937: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8909
Declutch Rod

000568909
BUWEPSDWG2248415: RNCC: 3 | RNVC: 2
2248415: RNCC: 3 | RNVC: 2
BUWEPSDWG2248415: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-8900
Gun Pod Extractor

000568900
BUWEPSDWG2537663: RNCC: 3 | RNVC: 2
2537663: RNCC: 3 | RNVC: 2
BUWEPSDWG2537663: RNCC: 5 | RNVC: 9

30 May 1967

1005-00-056-6753
20 Millimeter Automatic Gun

000566753
7791641: RNCC: 3 | RNVC: 2
7791641: RNCC: 5 | RNVC: 2
7791641: RNCC: 5 | RNVC: 9
1005PL0911275: RNCC: 6 | RNVC: 9
10104436: RNCC: 6 | RNVC: 9
MK-M61A1-1W: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-056-5842
Clearing Dev Signal

000565842
125C2661: RNCC: 1 | RNVC: 2
125C2661: RNCC: 3 | RNVC: 9
FD104: RNCC: 5 | RNVC: 9
AE154-001-99: RNCC: 5 | RNVC: 9
SMS13: RNCC: 5 | RNVC: 9
SMS13: RNCC: C | RNVC: 1

27 May 1967

1005-00-056-5837
Partit Retainer Set

000565837
511L871: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-056-5775
Bracket Assembly

000565775
175F237: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-056-5576
Coupling S Retainer

000565576
322882: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-053-9984
Bearing Retain Clip

000539984
11698211: RNCC: 3 | RNVC: 9

20 May 1967

1005-00-052-9535
Small Arms Cleaning Rod

000529535
4624: RNCC: 3 | RNVC: 2

5 Jan 1968

1005-00-051-1509
Feeder Link

000511509
135B5591: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1510
Case Chute

000511510
114C2664: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1487
Chute Clip

000511487
135B5819: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1482
Loader-Rammer Lever

000511482
905D356: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1485
Ammunition Chute

000511485
0621D6680: RNCC: 3 | RNVC: 2
905D370-2: RNCC: 5 | RNVC: 9

11 May 1967

1005-00-051-1478
Reload Lever

000511478
905D244: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1476
Lever Shaft

000511476
135B5927: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1472
Feed Handle

000511472
135B5923: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1450
Sliding Shaft

000511450
114C2790: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1392
Inner Shaft

000511392
135B5948: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1391
Declutching Cam

000511391
125C2767: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1389
Outer Shaft

000511389
135B5947: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1299
Scoop Guide

000511299
905D365: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1297
Ammunition Conveyor Element

000511297
905D297: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1207
Rear Gun Support

000511207
175F133: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1205
Rounds Limiter Bracket

000511205
125C2687: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-050-1973
Gun Support Assy

000501973
125C2777: RNCC: 3 | RNVC: 2

17 May 1968

1005-00-050-1979
Feed An Module Assy

000501979
67D4623: RNCC: 3 | RNVC: 2

17 May 1968

1005-00-050-1972
Gun Support

000501972
114C2770: RNCC: 3 | RNVC: 2
114C270: RNCC: 5 | RNVC: 2

17 May 1968

1005-00-050-1977
Control Cover Assy

000501977
67D4653: RNCC: 3 | RNVC: 2
66D12302: RNCC: 5 | RNVC: 1

17 May 1968

1005-00-050-1958
Armament Exit Cover

000501958
721E707G1: RNCC: 3 | RNVC: 2

17 May 1968

1005-00-050-1957
Gun Pod Heater Assy

000501957
65C9889: RNCC: 3 | RNVC: 2

17 May 1968

1005-00-050-1960
Armament Po Bracket

000501960
116C4262: RNCC: 3 | RNVC: 2

17 May 1968

1005-00-049-9419
Screw Front Swivel

000499419
233: RNCC: 3 | RNVC: 2
37E72: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-049-7309
Plate Assy

000497309
143-2127-4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-044-2773
Nose Fairing Assy

000442773
11698217: RNCC: 3 | RNVC: 9

6 May 1967

1005-00-041-0804
Ammunition Chute

000410804
C10507-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-038-6680
Recoil Adapter Assy

000386680
7268312: RNCC: 2 | RNVC: 2

3 Nov 1972

1005-00-035-4383
Lockbolt A Retainer

000354383
30F73720-1L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-035-2488
Gun Packa Door Assy

000352488
159-61027-50: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-034-8047
Tank Block

000348047
8715687: RNCC: 3 | RNVC: 2
1005000348047: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-032-4526
Case Liner Assembly

000324526
191-61094-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-030-5656
Case Liner Assembly

000305656
191-61091-41: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-026-7275
Gun And Mount

000267275
0S05192: RNCC: 3 | RNVC: 9
0S05192: RNCC: 5 | RNVC: 9
0S05192: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-026-7102
Cartridge Magazine

000267102
BUWEPSSK10032: RNCC: 3 | RNVC: 2
BUWEPSSK100332: RNCC: 3 | RNVC: 2
SK100332: RNCC: 3 | RNVC: 9
SK100332: RNCC: 5 | RNVC: 2
BUWEPSSK100332: RNCC: 5 | RNVC: 9
BUWEPSSK10032: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-026-7085
Extractor Assembly

000267085
299815ASSY: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-026-7123
Mechanism

000267123
SK138004: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-009-8876
28 Gage Shotgun

000098876
5432: RNCC: 3 | RNVC: 2

4 Aug 1972

1005-00-009-8867
12 Gage Shotgun

000098867
2903731: RNCC: 3 | RNVC: 9

4 Aug 1972

1005-00-040-9419
Ammunition; Consists Of 1 Assembly P/N 192-61028-1; 1 Subassembly P/N 192-6 Chute Assembly

000409419
192-61028-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-010-7615
Forward Rh Chute Assembly

000107615
CV15-409092-16: RNCC: 3 | RNVC: 2

1 Nov 1967

1005-00-064-5648
Rear Sight

000645648
7791437: RNCC: 3 | RNVC: 2
1005000645648: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-600-8925
Breech Lock

006008925
ARMYDWG6008925: RNCC: 3 | RNVC: 2
6008925: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-014-2924
Actuator Shaft

000142924
8438117: RNCC: 3 | RNVC: 2

6 May 1968

1005-01-659-8974
Sniper Rifle

016598974
16295: RNCC: 3 | RNVC: 2

21 Dec 2016

1005-01-658-1930
Semi-Automatic 9 Millimeter Pistol

016581930
UG1950702MOSU: RNCC: 3 | RNVC: 2
FG195A712MOSU: RNCC: 5 | RNVC: 2
FG195A712MOS: RNCC: 5 | RNVC: 2

16 Sep 2016

1005-01-622-2700
5.56 Millimeter Rifle Conversion Kit

016222700
05-196S: RNCC: 3 | RNVC: 2

2 Oct 2013

1005-00-011-6637
Ejection Chute

000116637
67K4624: RNCC: 3 | RNVC: 2
67K4624: RNCC: 5 | RNVC: 9

1 May 1968

1005-00-018-0853
Azimuth Mi Cam Assy

000180853
65751-03062-042: RNCC: 3 | RNVC: 2

8 May 1968

1005-00-014-2905
Slid Retainer Plate

000142905
8438096: RNCC: 3 | RNVC: 2

6 May 1968

1005-00-003-5953
Slip Ring Cover

000035953
8438862: RNCC: 3 | RNVC: 2

26 May 1972

1005-00-600-9830
Oil Buffer Rod

006009830
6009830: RNCC: 3 | RNVC: 2
A10379: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-014-2859
Interrupte Carriage

000142859
8438083: RNCC: 3 | RNVC: 2

6 May 1968

1005-01-587-3185
Tripod Yoke

015873185
DGMT0015: RNCC: 3 | RNVC: 2

3 Aug 2010

1005-01-690-3061
5.56 Millimeter Rifle

016903061
LA-EST-JUM-12: RNCC: 3 | RNVC: 2
LA-R20-RAHE-12: RNCC: 3 | RNVC: 2

5 Aug 2020

1005-00-005-8676
Rear Gun Mount Yoke

000058676
6-86053-2: RNCC: 3 | RNVC: 9
6-86053-2: RNCC: C | RNVC: 1

19 Jun 1972

1005-01-677-8589
Sniper Rifle

016778589
14556: RNCC: 3 | RNVC: 2

9 Jan 2019

1005-00-003-9543
Traverse Mechanism Parts Kit

000039543
SP29739: RNCC: 3 | RNVC: 2

27 May 1972

1005-00-018-0855
Ammunition Chute

000180855
65751-03067-043: RNCC: 3 | RNVC: 2

8 May 1968

1005-01-601-5579
Gun Component Retainer

016015579
94040: RNCC: 3 | RNVC: 2

19 Jan 2012

1005-01-697-5893
Breech Bolt

016975893
6528322: RNCC: 3 | RNVC: 2

29 Sep 2021

1005-01-045-8299
Scraper Ring

010458299
SP32855: RNCC: 3 | RNVC: 2

8 Aug 1977

1005-00-992-6658
Acti Guide Assembly

009926658
62119: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-01-664-1296
Cartridge Magazine

016641296
50113: RNCC: 3 | RNVC: 9
0806481501131: RNCC: 5 | RNVC: 2

7 Jun 2017

1005-01-444-9514
Rifle Mount

014449514
BSM: RNCC: 3 | RNVC: 2

20 May 1997

1005-01-566-0544
Machine Gun Bolt Slide

015660544
401023: RNCC: 3 | RNVC: 2

18 Aug 2008

1005-01-391-0694
Ammunition Feed Electrohydraulic Drive Assembly

013910694
025598-505: RNCC: 3 | RNVC: 2
025598-503: RNCC: 5 | RNVC: 9
025598-505: RNCC: 5 | RNVC: 9

2 Jun 1994

1005-00-903-8192
Cartridge Ejector

009038192
11010485: RNCC: 3 | RNVC: 2

1 Jan 1960

1005-01-657-9882
Magazine Catch Retainer

016579882
3164804693: RNCC: 3 | RNVC: 2

8 Sep 2016

1005-01-644-6969
Gun Case

016446969
1470022: RNCC: 3 | RNVC: 9

15 May 2015

1005-01-633-1496
Small Arms Weapon Suppressor

016331496
556QM-G5-1/2-28 STANDARD: RNCC: 3 | RNVC: 9
GEMTECH 556QM-G5-1/2-28: RNCC: 5 | RNVC: 2

12 Nov 2014

1005-01-609-1141
Small Arms Weapon Suppressor

016091141
RAPTOR II: RNCC: 3 | RNVC: 9

17 Jul 2012

1005-01-687-5065
7.62 Millimeter Subcaliber Gun

016875065
762-3000: RNCC: 3 | RNVC: 9
762-3000: RNCC: C | RNVC: 1

3 Apr 2020

1005-01-569-8193
Small Arms Weapon Suppressor

015698193
GEMTECH G5: RNCC: 3 | RNVC: 9
GEMTECH BOISE: RNCC: 5 | RNVC: 9
BUSHMASTER G-5: RNCC: 5 | RNVC: 9

9 Dec 2008

1005-01-497-2590
Ejec Chute Assembly

014972590
DMG0063: RNCC: 3 | RNVC: 2

15 May 2002

1005-01-513-9754
Shipboard Installation Battery System Machine Gun

015139754
13006173: RNCC: 3 | RNVC: 2

10 Oct 2003

1005-00-726-5655
Automatic Caliber .45 Pistol

007265655
7265655: RNCC: 3 | RNVC: 2
ARYMDWG7265655: RNCC: 5 | RNVC: 2
7265655: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-01-601-5581
Recoil Buffer Assembly

016015581
21057: RNCC: 3 | RNVC: 2

19 Jan 2012

1005-01-694-5030
Sniper Rifle

016945030
19062: RNCC: 3 | RNVC: 2

6 Apr 2021

1005-01-672-3134
Weapon Gun Modification Kit

016723134
5312025: RNCC: 3 | RNVC: 2
5312025: RNCC: 5 | RNVC: 2

27 Apr 2018

1005-01-617-5784
Shaft Seal

016175784
PAH-80 ITEM 4: RNCC: 3 | RNVC: 9

27 Mar 2013

1005-01-641-9775
Sniper Rifle

016419775
13314: RNCC: 3 | RNVC: 2

9 Feb 2015

1005-01-676-4234
5.56 Millimeter Rifle

016764234
02-088-15126-011: RNCC: 3 | RNVC: 2

26 Oct 2018

1005-00-010-0240
Caliber .30 Rifle

000100240
M1917 ENFIELD: RNCC: 3 | RNVC: 2

16 Mar 1998

1005-00-007-1196
Mounting Plate Assembly

000071196
8439120: RNCC: 3 | RNVC: 2

6 Jul 1972

1005-00-556-4274
Cleaning Case

005564274
5564274: RNCC: 3 | RNVC: 2
A20194: RNCC: 5 | RNVC: 2
75F9015: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-918-3009
Gun Mount Leg

009183009
10949609: RNCC: 3 | RNVC: 2

1 Jan 1960

1005-00-972-1537
Automatic Caliber .45 Pistol

009721537
6737965: RNCC: 3 | RNVC: 9
6737965: RNCC: C | RNVC: 1

3 Oct 1966

1005-00-014-2868
Adapter Ring

000142868
8438090: RNCC: 3 | RNVC: 2

6 May 1968

1005-00-018-0825
Armament System Electrical Control Box

000180825
A05A0089: RNCC: 3 | RNVC: 2
A05A0089-5: RNCC: 5 | RNVC: 9
A05A0089-4: RNCC: 5 | RNVC: 9

8 May 1968

1005-00-039-8990
Cupola Assembly Lock Handle Guide

000398990
7992790: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-01-601-5585
Safety Selector Detent

016015585
94033: RNCC: 3 | RNVC: 2

19 Jan 2012

1005-00-010-7582
Aft Lh Chute Assembly

000107582
CV15-409092-19: RNCC: 3 | RNVC: 2

1 Nov 1967

1005-01-627-4082
Small Arms Weapon Suppressor

016274082
30555: RNCC: 3 | RNVC: 2

14 Apr 2014

1005-00-003-8646
Cam Link

000038646
2875467: RNCC: 3 | RNVC: 2

21 May 1972

Load More Results