What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 89 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 89 of 125

1005-00-408-0146
Timer Picku Module

004080146
67D4575: RNCC: 3 | RNVC: 2
905D628: RNCC: 5 | RNVC: 2
11691562: RNCC: 5 | RNVC: 2

8 Sep 1972

1005-00-407-9864
Control Osc Module

004079864
11691563: RNCC: 3 | RNVC: 2

8 Sep 1972

1005-00-405-3572
20 Mm Gun Pallet

004053572
434-6120: RNCC: 3 | RNVC: 9
6720-78150-1: RNCC: 5 | RNVC: 9

31 Mar 1971

1005-00-405-2393
Pintle Mount

004052393
11699749: RNCC: 3 | RNVC: 2

31 Mar 1971

1005-00-405-2380
Ammunition Chute

004052380
7792346-3: RNCC: 3 | RNVC: 9

31 Mar 1971

1005-00-405-0369
Universal Joint Plug

004050369
20A368-4: RNCC: 3 | RNVC: 2
8438341-6: RNCC: 5 | RNVC: 2
1005004050369: RNCC: 6 | RNVC: 9

29 Mar 1971

1005-00-404-7463
Loading Adapter

004047463
8449936: RNCC: 3 | RNVC: 2

6 Aug 1969

1005-00-404-7457
Magazine Drive Support

004047457
8449906: RNCC: 3 | RNVC: 2

6 Aug 1969

1005-00-404-7482
End Assembly

004047482
8441540: RNCC: 3 | RNVC: 2
S762-215-17: RNCC: 5 | RNVC: 9

6 Aug 1969

1005-00-404-7469
Handle Rod

004047469
8441520: RNCC: 3 | RNVC: 2

6 Aug 1969

1005-00-403-9501
Cupola Vision Block Support

004039501
11644601: RNCC: 3 | RNVC: 2

28 Jul 1969

1005-00-403-2085
Shotgun Barrel

004032085
30525: RNCC: 3 | RNVC: 9

5 Jun 1970

1005-00-402-2200
Bell Rammer Head

004022200
8766006: RNCC: 3 | RNVC: 2

3 Apr 1970

1005-00-401-4747
Reductor

004014747
2537735: RNCC: 3 | RNVC: 2

21 Nov 1969

1005-00-401-4745
Am Waxing Mechanism

004014745
2471494: RNCC: 3 | RNVC: 2

21 Nov 1969

1005-00-401-4746
Ball Plunger

004014746
2471063: RNCC: 3 | RNVC: 2

21 Nov 1969

1005-00-401-4744
Round Chute

004014744
2471482: RNCC: 3 | RNVC: 2

21 Nov 1969

1005-00-401-4743
Link Tray

004014743
2471420: RNCC: 3 | RNVC: 2

21 Nov 1969

1005-00-401-0768
Release Mech Drag Chute Latch Assembly

004010768
2826185-1: RNCC: 3 | RNVC: 2

18 Nov 1969

1005-00-400-8037
Pi Firing Indicator

004008037
BUWEPSDWG2537746: RNCC: 3 | RNVC: 2
2537746: RNCC: 3 | RNVC: 2
BUWEPSDWG2537746: RNCC: 5 | RNVC: 9

14 Nov 1969

1005-00-400-2955
Receiver Plate

004002955
1236044: RNCC: 3 | RNVC: 2

28 Feb 1969

1005-00-399-6796
Support

003996796
8683284: RNCC: 3 | RNVC: 2
1005003996796: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-399-6763
Guard

003996763
8683153: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-399-6713
Support

003996713
8396538: RNCC: 3 | RNVC: 2
A20157: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-397-7570
Tim Spring Assembly

003977570
800750: RNCC: 3 | RNVC: 9
800750: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-397-7466
Valve Plunger

003977466
202622: RNCC: 3 | RNVC: 2
202622: RNCC: 3 | RNVC: 9
202622: RNCC: 5 | RNVC: 9
202622: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-397-7371
Anti Link Assembly

003977371
110-2130: RNCC: 3 | RNVC: 2
110-2130: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-397-7367
50 Caliber Bo Lever

003977367
29953: RNCC: 3 | RNVC: 2
29953: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-397-7369
Counter Lever

003977369
202667: RNCC: 3 | RNVC: 9
202667: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-397-1144
Ejection Chute

003971144
37F73366-15: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-397-1145
Gun Mount

003971145
37F73504-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-397-1142
Ejection Chute

003971142
37F73366-11: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-397-1143
Ejection Chute

003971143
37F73366-13: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-395-3113
Bag And Frame Assy

003953113
492491: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-388-6615
Canvas Cover

003886615
BUWEPS0S04082: RNCC: 3 | RNVC: 2
0S04082: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-7948
20Mm Canvas Cover

003847948
BUWEPSDWG475588: RNCC: 3 | RNVC: 2
475588: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-7761
Charger Valve

003847761
BUWEPSDWG938504: RNCC: 3 | RNVC: 2
938504: RNCC: 3 | RNVC: 2
938504: RNCC: 3 | RNVC: 2
BUWEPSDWG938504: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-384-6712
Mechanism

003846712
SK100335: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-384-6620
Bolt

003846620
482546: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6615
Cam Stop Roller

003846615
482484: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6614
Retainer

003846614
482483: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-384-6601
Magazine Lever

003846601
367770PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-384-6613
Stop Rod Assembly

003846613
482472: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6591
Bracket Assembly

003846591
367729PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6558
Lock Screw Cover Plug

003846558
299969PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6572
Loader Assembly

003846572
BUWEPSDWG367524: RNCC: 3 | RNVC: 2
367524: RNCC: 3 | RNVC: 9
BUWEPSDWG367524: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-384-6556
Lever

003846556
299966PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6554
Gun Cradle

003846554
299948PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6511
Spa Wrench Assembly

003846511
299831PC4: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-384-6510
Screw Plug

003846510
299827PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6506
Punch

003846506
299819PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6488
Should Pad Assembly

003846488
299738PC90: RNCC: 3 | RNVC: 2
299738PC90: RNCC: 5 | RNVC: 2
299738PC90: RNCC: 5 | RNVC: 2
299738PC90: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-384-6470
Crank Pin

003846470
255395PC7: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6477
Axis Bolt

003846477
299653PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-6467
Pin

003846467
255394PC6: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-384-6468
Roller Pin

003846468
255395PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-2199
Tompion

003842199
1211728: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-384-2145
Firing Pin

003842145
7237613: RNCC: 3 | RNVC: 2
820392: RNCC: 3 | RNVC: 2
7237613: RNCC: 5 | RNVC: 2
7237613: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-384-2096
Collar Assembly Gua

003842096
1477406: RNCC: 3 | RNVC: 2
SK147706: RNCC: 3 | RNVC: 2
SK147706: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-382-7089
20 Mm 6-0 Cover

003827089
BUWEPSSK177311: RNCC: 3 | RNVC: 2
SK177311: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9068
Cradle Trunnion Pin

003809068
299798PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9037
Roller

003809037
299721PC8: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-380-9001
Axis Bolt

003809001
299673PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9082
Anchor Bolt

003809082
299809PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9017
Axis Bolt

003809017
299695PC6: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9012
Is A Bolt

003809012
299690PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9030
Magazi Loading Tool

003809030
299712PC7: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9034
Hand Grip Assembly

003809034
299719PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9020
Retaining Bolt

003809020
299698PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9011
Parallelogram Assem

003809011
299689: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9013
Is Lever A Bolt

003809013
299690PC8: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9000
Machine Parts Pin

003809000
299671PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8995
Breech Bolt

003808995
299660PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-9005
Is A Bolt

003809005
299680PC2: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-380-8994
Is A Bolt

003808994
299659PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8998
Securing Bolt

003808998
299666PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8960
Gun Mount Pedestal Brace

003808960
SK165158: RNCC: 3 | RNVC: 2
439945PC1: RNCC: 3 | RNVC: 2
439945: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-380-8928
Securing Chain

003808928
328161PC1C: RNCC: 3 | RNVC: 2
328161-1: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-380-8964
Tripod Assy

003808964
439952: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8938
Feedway Adapter

003808938
375368: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8967
Rear Pin

003808967
439954PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-380-8882
Trigger Assembly

003808882
325133PC90: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-373-9840
Locking Insert

003739840
RZA10020: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-370-1574
Plastic Trim

003701574
2838167: RNCC: 3 | RNVC: 2

26 Feb 1969

1005-00-370-1584
Ballistic Backrest

003701584
2838073: RNCC: 3 | RNVC: 2
2838073: RNCC: 5 | RNVC: 2
BUWEPSDWG2838073: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-370-1575
Small Arms Sling

003701575
2838076: RNCC: 3 | RNVC: 2
BUWEPSDWG2838076: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-370-1387
Gear Drive

003701387
2838102: RNCC: 1 | RNVC: 2
2838102: RNCC: 3 | RNVC: 2
BUWEPSDWG2838102: RNCC: 3 | RNVC: 2
R3200: RNCC: 5 | RNVC: 9
R-3200: RNCC: 5 | RNVC: 9

26 Feb 1969

1005-00-370-0592
Armor Plate

003700592
2838131: RNCC: 3 | RNVC: 2
BUWEPSDWG2838131: RNCC: 5 | RNVC: 2
2838131: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-370-0068
Trigger Extension

003700068
2846690-2: RNCC: 3 | RNVC: 2
2846690-2: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-370-0065
Trigger Extension

003700065
2846690-1: RNCC: 3 | RNVC: 2
2846690 1: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-370-0014
Handle-Trigger Asse

003700014
2838137: RNCC: 3 | RNVC: 2

26 Feb 1969

1005-00-369-9977
Charging Adapt Tube

003699977
2846700-1: RNCC: 3 | RNVC: 2
2846700: RNCC: C | RNVC: 1

26 Feb 1969

1005-00-369-9973
Front Sight

003699973
2838142: RNCC: 3 | RNVC: 2
BUWEPSDWG2838142: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-369-9972
Gun End Adapter

003699972
2838091-2: RNCC: 3 | RNVC: 2
S50-1245-2: RNCC: 5 | RNVC: 2

26 Feb 1969

1005-00-369-9971
Feed Chute

003699971
2838092-2 10001: RNCC: 1 | RNVC: 2
S50-1200-28: RNCC: 3 | RNVC: 2
2838092 2: RNCC: 3 | RNVC: 2
2838092-2: RNCC: 5 | RNVC: 9

26 Feb 1969

1005-00-369-9970
Ammunition Chute Adapter

003699970
S50-1245-1: RNCC: 1 | RNVC: 2
2838091-1: RNCC: 3 | RNVC: 2
S50-1245-1RH: RNCC: 5 | RNVC: 9

26 Feb 1969

1005-00-369-6908
Gun Insulating Assy

003696908
12S896-55: RNCC: 3 | RNVC: 2

24 Feb 1969

1005-00-369-6853
Empty Cartridge Bag

003696853
4119204-5: RNCC: 3 | RNVC: 2
4119204-5: RNCC: 3 | RNVC: 9
4119204: RNCC: D | RNVC: 9

24 Feb 1969

1005-00-368-9671
Stock Assembly

003689671
7311959: RNCC: 3 | RNVC: 2
R140: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-368-0368
Ammunition Drum Assembly Partition

003680368
163B5879: RNCC: 3 | RNVC: 2

27 Feb 1974

1005-00-355-2642
Chute End Assembly

003552642
1311C14458: RNCC: 3 | RNVC: 2

6 Feb 1974

1005-00-349-9197
Ammunition Chute

003499197
8447528: RNCC: 3 | RNVC: 2

24 Mar 1971

1005-00-348-9607
Declutching Feeder Assembly

003489607
12007300: RNCC: 3 | RNVC: 2

30 Jan 1974

1005-00-348-8653
Gun Charger

003488653
7267982: RNCC: 3 | RNVC: 2
A20156: RNCC: 5 | RNVC: 2
1005003488653: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-348-1142
Motor End Cap Assembly

003481142
143-2033: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-348-1128
Carrier Assembly

003481128
143-2010: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-348-1129
Low Speed Gear Assembly

003481129
143-2011: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-346-7741
Ammunition Chute

003467741
216-29222-5: RNCC: 3 | RNVC: 2

20 Jan 1974

1005-00-344-8935
Mainspring

003448935
R132: RNCC: 3 | RNVC: 2
7311900: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6828
Breechblock Rig Key

003446828
1169107: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6857
Receiver Righ Slide

003446857
BUWEPSDWG1236043: RNCC: 3 | RNVC: 2
1236043: RNCC: 3 | RNVC: 2
BUWEPSDWG1236043: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-344-6808
Valve Body

003446808
BUWEPSDWG529175: RNCC: 3 | RNVC: 2
529175: RNCC: 3 | RNVC: 2
BUWEPSDWG529175: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-344-6444
Oil Buffer Ring

003446444
ARMYDWG5009297: RNCC: 3 | RNVC: 2
5009297: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-344-6499
Wrench

003446499
6528242: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6479
Slide Assy

003446479
6008965: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6339
Plate

003446339
9012: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6328
Action Slide Handle

003446328
512: RNCC: 3 | RNVC: 2
512: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-344-6069
Left Extractor

003446069
7311891: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6156
Rifle Grenade Launcher Sight

003446156
5750053: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6088
Swivel Assy

003446088
7311961: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6091
Cleaning Rod

003446091
7312516: RNCC: 3 | RNVC: 2
1REB: RNCC: 5 | RNVC: 2
7312516: RNCC: 5 | RNVC: 2
7312516: RNCC: 5 | RNVC: 9
1REB: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-344-6072
Front Hood

003446072
7311895: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6125
Operating Stop

003446125
5196441: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6079
Safety

003446079
R136: RNCC: 3 | RNVC: 2
7311915: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6081
Trigger

003446081
7311949: RNCC: 3 | RNVC: 2
R144: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6078
Receiver

003446078
R135: RNCC: 3 | RNVC: 2
7311914: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6074
Butt Plate

003446074
7311907: RNCC: 3 | RNVC: 2
R111: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6073
Firing Pin

003446073
7311903: RNCC: 3 | RNVC: 2
R117: RNCC: 3 | RNVC: 2
R117: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-344-6071
Guard Trigger

003446071
R145: RNCC: 3 | RNVC: 2
7311894: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6070
Right Extractor

003446070
7311892: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6066
Bracket

003446066
7311877: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6067
Mainspring Cap

003446067
7311884: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6063
M44 Barrel

003446063
R101: RNCC: 3 | RNVC: 2
7311872: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6065
Bolt Body

003446065
7311875: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-6064
Front Base

003446064
7311873: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-5965
Sear Bar Pin

003445965
64H: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-344-1550
Automatic Gun Rotor

003441550
7269015: RNCC: 3 | RNVC: 2
7790672: RNCC: 5 | RNVC: 2

15 Jan 1974

1005-00-344-0182
Haust E Check Assy

003440182
931433: RNCC: 3 | RNVC: 9
931433: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-344-0183
Piston Assy

003440183
966712: RNCC: 3 | RNVC: 2
966712: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-344-0166
Special Housing Assembly

003440166
182-2104: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-0164
Ammunition Handling Sprocket

003440164
182-2101: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-344-0181
Lever Assy

003440181
8723909: RNCC: 3 | RNVC: 2
840862: RNCC: 5 | RNVC: 9
840862: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-342-8876
Cartridge Stop

003428876
180-61057: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-341-6328
Open Check Sight

003416328
761503: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-341-6327
Rifle Grenade Launcher Sight Mounting Plate

003416327
761502: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-341-3970
Machine Gun-Automatic Gun Ammunition Feeder

003413970
37F73207-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-340-6577
Gun Blas Panel Assy

003406577
192-61241-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-340-6576
Gun Blas Panel Assy

003406576
180-61040-2: RNCC: 3 | RNVC: 2
192-61240-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-338-6980
Ammunition Handling Sprocket

003386980
726053-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-338-6124
Small Arms Cartridge Guide

003386124
223-61136: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-338-4343
Ammunition Ca Latch

003384343
750349-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-338-2819
Tube Latch Plunger

003382819
8415315: RNCC: 3 | RNVC: 2
8415315: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-338-2817
Gun Operating Rod Assembly

003382817
8415183: RNCC: 3 | RNVC: 2
8415183: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-337-3905
Gun Blas Panel Assy

003373905
192-61240-1: RNCC: 3 | RNVC: 2
180-61040-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-337-3906
Gun Blas Panel Assy

003373906
192-61241-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-337-0467
Valve Plunger Assy

003370467
800871: RNCC: 3 | RNVC: 9
800871: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-337-0468
Front Rocker Assy

003370468
800737: RNCC: 3 | RNVC: 9
800737: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-336-4636
Guide Strip

003364636
BUWEPS SK231781: RNCC: 3 | RNVC: 2
SK231781: RNCC: 3 | RNVC: 2
BUWEPS SK231781: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-336-4633
Sprocket

003364633
SK231731: RNCC: 3 | RNVC: 2
BUWEPS SK231731: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-336-4632
Sprocket

003364632
SK231730: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-336-4627
Guide Plate

003364627
BUWEPS SK231723: RNCC: 3 | RNVC: 2
SK231723: RNCC: 3 | RNVC: 2
BUWEPS SK231723: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-336-4629
Stripping Guide

003364629
BUWEPS SK231725: RNCC: 3 | RNVC: 2
SK231725: RNCC: 3 | RNVC: 2
BUWEPS SK231725: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-336-4628
Stripper

003364628
BUWEPS SK231724: RNCC: 3 | RNVC: 2
SK231724: RNCC: 3 | RNVC: 2
BUWEPS SK231724: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-335-4251
Cupola Lock Bolt

003354251
7992788: RNCC: 3 | RNVC: 2
1005003354251: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-335-2765
Gun Barrel Stab Rod

003352765
180-61061-7: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-2740
Blast Deflector

003352740
CV10-409114-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-0348
Gun Blas Panel Assy

003350348
223-61041-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-0355
M39 Gun A Lock Assy

003350355
223-61095-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-0335
M39 G Chute Subassy

003350335
223-61032-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-0345
Gun Blas Panel Assy

003350345
223-61040-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-335-0329
Ammunition Chute Assembly

003350329
223-61028-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-334-2917
Spring Retur Button

003342917
BUWEPSDWG1483669: RNCC: 3 | RNVC: 2
1483669: RNCC: 3 | RNVC: 2
BUWEPSDWG1483669: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2909
Shaft Sleeve

003342909
BUWEPSDWG1411258: RNCC: 3 | RNVC: 2
1411258: RNCC: 3 | RNVC: 2
BUWEPSDWG1411258: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2916
Switch Assy

003342916
BUWEPSDWG1411276: RNCC: 3 | RNVC: 2
1411276: RNCC: 3 | RNVC: 2
BUWEPSDWG1411276: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2913
Button Contact Assy

003342913
BUWEPSDWG1411267: RNCC: 3 | RNVC: 2
1411267: RNCC: 3 | RNVC: 2
BUWEPSDWG1411267: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2911
Stripper Assy

003342911
1236127: RNCC: 3 | RNVC: 2
BUWEPSDWG1411262: RNCC: 5 | RNVC: 9
1411262: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2894
Piston

003342894
BUWEPS0WG1236120: RNCC: 3 | RNVC: 2
1236120: RNCC: 3 | RNVC: 2
BUWEPS0WG1236120: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2896
Spring Housing

003342896
BUWEPSDWG1236131: RNCC: 3 | RNVC: 2
1236131: RNCC: 3 | RNVC: 2
BUWEPSDWG1236131: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2907
Buffer Plate Assembly

003342907
BUWEPSDWG1411250: RNCC: 3 | RNVC: 2
1411250: RNCC: 3 | RNVC: 2
BUWEPSDWG1411250: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2908
Hold Down Shaft

003342908
BUWEPSDWG1411257: RNCC: 3 | RNVC: 2
1411257: RNCC: 3 | RNVC: 2
BUWEPSDWG1411257: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2893
Pawl Arm

003342893
BUWEPSDWG1236070: RNCC: 3 | RNVC: 2
A355: RNCC: 3 | RNVC: 2
1236070: RNCC: 3 | RNVC: 2
BUWEPSDWG1236070: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2904
Contact Assy

003342904
1411245: RNCC: 3 | RNVC: 2
1411245: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2899
Slide Assy

003342899
BUWEPSDWG1396320: RNCC: 3 | RNVC: 2
1396320: RNCC: 3 | RNVC: 2
BUWEPSDWG1396320: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2901
Gas Cylinder S Plug

003342901
BUWEPSDWG1396327: RNCC: 3 | RNVC: 2
1396327: RNCC: 3 | RNVC: 2
BUWEPSDWG1396327: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2890
Case Ejector

003342890
BUWEPSDWG1236045: RNCC: 3 | RNVC: 2
1236045: RNCC: 3 | RNVC: 2
BUWEPSDWG1236045: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2889
Ejector Pin

003342889
BUWEPSDWG1169123: RNCC: 3 | RNVC: 2
1169123: RNCC: 3 | RNVC: 2
BUWEPSDWG1169123: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2891
Cover Plate

003342891
BUWEPSDWG1236046: RNCC: 3 | RNVC: 2
1236046: RNCC: 3 | RNVC: 2
BUWEPSDWG1236046: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2867
Tie Bar Lock

003342867
BUWEPSDWG862441: RNCC: 3 | RNVC: 2
BUWEPSDWG862441: RNCC: 3 | RNVC: 2
862441: RNCC: 3 | RNVC: 2
168-1094: RNCC: 5 | RNVC: 2
BUWEPSDWG862441: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2881
After Holding Pawl

003342881
BUWEPSDWG1169113: RNCC: 3 | RNVC: 2
1169113: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-334-2882
Cylinder Sleeve Rod

003342882
1169114: RNCC: 3 | RNVC: 2
BUWEPSDWG1169114: RNCC: 3 | RNVC: 2
1169114: RNCC: 3 | RNVC: 2
7771624: RNCC: 5 | RNVC: 2
BUWEPSDWG1169114: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2866
Sear Slide

003342866
BUWEPSDWG862417: RNCC: 3 | RNVC: 2
862417: RNCC: 3 | RNVC: 2
862417-T: RNCC: 5 | RNVC: 2
BUWEPSDWG862417: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2871
Tie Bar Collar

003342871
BUWEPSDWG938308: RNCC: 3 | RNVC: 2
BUWEPSDWG938308: RNCC: 3 | RNVC: 2
938308: RNCC: 3 | RNVC: 2
BUWEPSDWG938308: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2880
Disconnect

003342880
1123728: RNCC: 3 | RNVC: 2
BUWEPSDWG1123728: RNCC: 3 | RNVC: 2
1123728: RNCC: 3 | RNVC: 2
1123728: RNCC: 3 | RNVC: 2
BUWEPSDWG1123728: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2864
Tie Bar Link

003342864
BUWEPSDWG736998: RNCC: 3 | RNVC: 2
736998: RNCC: 3 | RNVC: 2
BUWEPSDWG736998: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2856
Throat Assy

003342856
BUWEPSDWG899857: RNCC: 3 | RNVC: 2
899857: RNCC: 3 | RNVC: 2
BUWEPSDWG899857: RNCC: 5 | RNVC: 9
899857: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-334-2868
Plate Assy

003342868
BUWEPSDWG862460: RNCC: 3 | RNVC: 2
862460: RNCC: 3 | RNVC: 2
BUWEPSDWG862460: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2839
Buffer Sleeve

003342839
BUWEPSDWG862480: RNCC: 3 | RNVC: 2
862480: RNCC: 3 | RNVC: 2
7139421: RNCC: 5 | RNVC: 2
BUWEPSDWG862480: RNCC: 5 | RNVC: 9
862480: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-334-2840
Charger Sleeve

003342840
BUWEPSDWG957312: RNCC: 3 | RNVC: 2
957312: RNCC: 3 | RNVC: 2
BUWEPSDWG957312: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2833
Sear

003342833
BUWEPSDWG938367: RNCC: 3 | RNVC: 2
938367: RNCC: 3 | RNVC: 2
BUWEPSDWG938367: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2827
Buffer Lock Plunger

003342827
BUWEPSDWG763168: RNCC: 3 | RNVC: 2
763168: RNCC: 3 | RNVC: 2
BUWEPSDWG763168: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2837
Valve Dumping Seat

003342837
BUWEPSDWG529173: RNCC: 3 | RNVC: 2
529173: RNCC: 3 | RNVC: 2
529173: RNCC: 5 | RNVC: 2
BUWEPSDWG529173: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2831
Bearing Ring

003342831
BUWEPSDWG529179: RNCC: 3 | RNVC: 2
529179: RNCC: 3 | RNVC: 2
BUWEPSDWG529179: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2838
Charger Shuttle

003342838
938503: RNCC: 3 | RNVC: 2
938503: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-334-2824
Slide Spring Plug

003342824
BUWEPSDWG957456: RNCC: 3 | RNVC: 2
957456: RNCC: 3 | RNVC: 2
BUWEPSDWG957456: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2829
Reducer

003342829
BUWEPSDWG529184: RNCC: 3 | RNVC: 2
529184: RNCC: 3 | RNVC: 2
BUWEPSDWG529184: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2821
Rear Buffer Piston

003342821
7771625: RNCC: 2 | RNVC: 2
1169119: RNCC: 5 | RNVC: 1
BUWEPSDWG1169119: RNCC: 5 | RNVC: 9
1169119: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2822
Filler Plate

003342822
986006: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-334-2812
Last Round Lock Pin

003342812
BUWEPSDWG938321: RNCC: 3 | RNVC: 2
938321: RNCC: 3 | RNVC: 2
938321: RNCC: 5 | RNVC: 2
BUWEPSDWG938321: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2817
Drive Piston

003342817
BUWEPSDWG862414: RNCC: 3 | RNVC: 2
862414: RNCC: 3 | RNVC: 2
BUWEPSDWG862414: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2819
Charger Piston

003342819
529186: RNCC: 3 | RNVC: 2
BUWEPSDWG529186: RNCC: 5 | RNVC: 9
529186: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2813
Sear Pin

003342813
BUWEPSDWG938319: RNCC: 3 | RNVC: 2
938319: RNCC: 3 | RNVC: 2
BUWEPSDWG938319: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2811
Latch Cover Pin

003342811
986307: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-334-2810
Release Pin Assy

003342810
BUWEPSDWG938302: RNCC: 3 | RNVC: 2
938302: RNCC: 3 | RNVC: 2
BUWEPSDWG938302: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2799
Last Round Lock

003342799
BUWEPSDWG986306: RNCC: 3 | RNVC: 2
986306: RNCC: 3 | RNVC: 2
BUWEPSDWG986306: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2798
Shaft Lock

003342798
BUWEPSDWG938379: RNCC: 3 | RNVC: 2
938379: RNCC: 3 | RNVC: 2
BUWEPSDWG938379: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2797
Ejector Lock

003342797
BUWEPSDWG862463: RNCC: 3 | RNVC: 2
862463: RNCC: 3 | RNVC: 2
BUWEPSDWG862463: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2796
Pawl Release Lever

003342796
BUWEPSDWG862470: RNCC: 3 | RNVC: 2
862470: RNCC: 3 | RNVC: 2
BUWEPSDWG862470: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2791
Recoil Housing Assembly

003342791
BUWEPSDWG529180: RNCC: 3 | RNVC: 2
529180: RNCC: 3 | RNVC: 2
BUWEPSDWG529180: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2790
Ram Head

003342790
BUWEPSDWG862539: RNCC: 3 | RNVC: 2
862539: RNCC: 3 | RNVC: 2
7139434: RNCC: 5 | RNVC: 2
BUWEPSDWG862539: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2785
Gas Cylinder Guide

003342785
BUWEPSDWG862528: RNCC: 3 | RNVC: 2
862528: RNCC: 3 | RNVC: 2
7139423: RNCC: 5 | RNVC: 2
BUWEPSDWG862528: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2786
Spring Guide

003342786
938390: RNCC: 3 | RNVC: 2
BUWEPSDWG938390: RNCC: 5 | RNVC: 9
938390: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2776
Collar

003342776
BUWEPSDWG938487: RNCC: 3 | RNVC: 2
938487: RNCC: 3 | RNVC: 2
BUWEPSDWG938487: RNCC: 5 | RNVC: 9

16 Jul 1969

1005-00-334-2787
Throat Guide

003342787
BUWEPSDWG1136938: RNCC: 3 | RNVC: 2
1136938: RNCC: 3 | RNVC: 2
BUWEPSDWG1136938: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2773
Charger Tube Cap

003342773
BUWEPSDWG862541: RNCC: 3 | RNVC: 2
862541: RNCC: 3 | RNVC: 2
7139436: RNCC: 5 | RNVC: 2
BUWEPSDWG862541: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2771
Hold Down Cam

003342771
BUWEPSDWG986313: RNCC: 3 | RNVC: 2
986313: RNCC: 3 | RNVC: 2
BUWEPSDWG986313: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2775
Barrel Holdin Clamp

003342775
BUWEPSDWG888616: RNCC: 3 | RNVC: 2
888616: RNCC: 3 | RNVC: 2
BUWEPSDWG888616: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2770
Release Cam

003342770
BUWEPSDWG986309: RNCC: 3 | RNVC: 2
986309: RNCC: 3 | RNVC: 2
BUWEPSDWG986309: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2769
Sear Slide Bumper

003342769
BUWEPSDWG862461: RNCC: 3 | RNVC: 2
862461: RNCC: 3 | RNVC: 2
BUWEPSDWG862461: RNCC: 5 | RNVC: 9
862461: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-334-2774
Charger Assy

003342774
851503: RNCC: 3 | RNVC: 2
BUWEPSDWG851503: RNCC: 3 | RNVC: 2
851503: RNCC: 3 | RNVC: 2
7139410: RNCC: 5 | RNVC: 2
BUWEPSDWG851503: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2767
Buffer Assy

003342767
529185: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-334-2765
Gas Cy Bracket Assy

003342765
BUWEPSDWG1169110: RNCC: 3 | RNVC: 2
1169110: RNCC: 3 | RNVC: 2
1169110: RNCC: 5 | RNVC: 2
BUWEPSDWG1169110: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-334-2498
Relieved Bolt

003342498
439943PC3: RNCC: 3 | RNVC: 2
439943-3: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-334-2542
Bolt Assy

003342542
299692: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-333-9218
Gun Ammunitio Strip

003339218
223-61130-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-333-9214
Gun Ammu Track Assy

003339214
223-61127-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-333-9213
Gun Ammu Track Assy

003339213
223-61127-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-333-3578
Bayonet-Knife Grip

003333578
7267653: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-333-3577
Bayonet-Knife Grip

003333577
7267652: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-330-3480
Adjustable Retainer

003303480
760571: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-330-1287
Plunger

003301287
299966PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-330-1286
Left Hand Support

003301286
299897PC8: RNCC: 3 | RNVC: 2
SK168819PC893: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-327-1889
Lower Half Magazine Tube Throat

003271889
40102: RNCC: 3 | RNVC: 2
120040102: RNCC: 5 | RNVC: 2

3 Dec 1973

1005-00-326-8701
Automatic Gun Lubricator

003268701
198F203: RNCC: 3 | RNVC: 2

3 Dec 1973

1005-00-325-5348
Pin

003255348
8723867: RNCC: 3 | RNVC: 2
241257: RNCC: 5 | RNVC: 2
241257: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-320-6173
Ammunition B Spring

003206173
180-61067: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-319-8638
Belting Machine

003198638
309151PC3: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-319-8521
Trigger

003198521
50326PC7: RNCC: 3 | RNVC: 9
50326-7: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-319-8465
Bolt Body

003198465
BUWEPSDWG1265874: RNCC: 3 | RNVC: 2
1265874: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-319-8500
Cleaning Rod

003198500
5570743: RNCC: 3 | RNVC: 2
ARMYDWG5570743: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-319-7801
Carrier Spring

003197801
7311042: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-319-7799
Carrier Plunger

003197799
7311018: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-317-2427
Gun Mount

003172427
8408959: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-317-2449
Bracket Assy

003172449
8413683: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-317-2428
Gun Mount

003172428
8408961: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-317-2425
Gun Mount

003172425
8408948: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-313-2505
Chute Assembly

003132505
5826777-5: RNCC: 3 | RNVC: 2

2 Nov 1973

1005-00-311-5394
Bore Alignment Tool

003115394
BUWEPSDWG1411290: RNCC: 3 | RNVC: 2
1411290: RNCC: 3 | RNVC: 2
BUWEPSDWG1411290: RNCC: 5 | RNVC: 9
1411290: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-311-3325
Pin

003113325
BUWEPSDWG938387: RNCC: 3 | RNVC: 2
1064550: RNCC: 3 | RNVC: 2
938387: RNCC: 3 | RNVC: 2
938387: RNCC: 5 | RNVC: 2
BUWEPSDWG938387: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-311-1963
Cover Sub-Assembly

003111963
BUWEPSDWG880843: RNCC: 3 | RNVC: 2
BUWEPSDWG880843: RNCC: 3 | RNVC: 9
880843: RNCC: 5 | RNVC: 2
880843: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-309-6651
Mainspring Housing

003096651
27S: RNCC: 3 | RNVC: 2
27S: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-307-0581
Ejection Chute

003070581
S12-1300: RNCC: 3 | RNVC: 2
5826777-3: RNCC: 5 | RNVC: 9

19 Oct 1973

1005-00-305-0627
Af Chuting Assembly

003050627
9229: RNCC: 3 | RNVC: 2
95728: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-305-0762
Electrohydraulic Drive Unit

003050762
8720102: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-305-0734
Rammer Sprocket

003050734
8401484: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-305-0731
Idler Sprocket

003050731
8401428: RNCC: 3 | RNVC: 2
8401428: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-305-0046
Case Door Assembly

003050046
37F73373-3-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-304-9993
Fusel Door Assembly

003049993
37F73371-5-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-304-9986
Fusel Door Assembly

003049986
37F73370-3-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-304-9987
Fusel Door Assembly

003049987
37F73370-5-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-304-9995
Fusel Door Assembly

003049995
37F73372-1-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-304-9985
Fusel Door Assembly

003049985
37F73370-3-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-303-0228
Fo Chuting Assembly

003030228
9227: RNCC: 3 | RNVC: 2
95726: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-300-5489
Machine Gun Mount

003005489
3443736-501: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-300-5490
Machine Gun Mount

003005490
3444028-501: RNCC: 3 | RNVC: 2
3444028-501: RNCC: 5 | RNVC: 9
3444028: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-287-8919
Cartridge Link Retainer

002878919
12007238: RNCC: 3 | RNVC: 2

12 Sep 1973

1005-00-283-7695
7.62 Millimeter Rifle

002837695
7267000: RNCC: 3 | RNVC: 1

5 Sep 1973

1005-00-283-2761
Plate Retainer

002832761
162B8282: RNCC: 3 | RNVC: 2

25 Aug 1973

1005-00-280-7247
Gun System Exit Unit

002807247
176F530: RNCC: 3 | RNVC: 2

17 Aug 1973

1005-00-279-0682
Gearbox Housing Assembly

002790682
176F699: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0658
Case Sensor Arm

002790658
176F675: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0657
Handoff Unit Plate

002790657
188F723: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0508
Machine Gun Housing

002790508
355943: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-276-7895
Ammunition Transfer Unit

002767895
176F766: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-275-5748
Automatic Gun Feeder

002755748
176F603: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5722
Rear Download Gate

002755722
139C6506: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5746
Drive Yoke-Connector

002755746
388369: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5744
Boresight Block

002755744
176F636: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5717
Sliding Gate-Plate

002755717
117D2229: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5724
Support Housing

002755724
117D2103: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5704
Front Onload Gate Assembly

002755704
162B8356: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5655
Tapered Mounting Post

002755655
162B8357-5: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5649
Tapered Mounting Post

002755649
162B8357-6: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5632
Sprocket Assembly Spring-Lock

002755632
125C3729: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5626
Actuator Shaft

002755626
162B8284: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5621
Ammunition Cartridge Guide

002755621
117D2139: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5623
Nose Guide

002755623
117D2140: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5618
Handoff Housing Assembly

002755618
139C6450: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5585
Gun Yoke Support Pin

002755585
68A323189-2003: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5547
Center Gate Arm

002755547
117D2164: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5548
Download Gate

002755548
117D2186: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5545
Plate Retainer

002755545
162B8282-2: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5551
Outer Gate Assembly

002755551
139C6597: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5543
Outer Gate Shaft

002755543
139C6513: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5549
Download Gate Arm

002755549
117D2163: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-271-6033
Ammunition Feed Pawl

002716033
5222462: RNCC: 3 | RNVC: 2
200820413-02: RNCC: 5 | RNVC: 2
200820413-02: RNCC: 5 | RNVC: 2
A222462: RNCC: 5 | RNVC: 9

20 Jul 1973

1005-00-269-5242
Mounting Bracket

002695242
117D2162: RNCC: 3 | RNVC: 2

20 Jul 1973

1005-00-268-7031
Entrance Unit Housing

002687031
189F491: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-268-7019
Aircraft Gun Drive Unit

002687019
189F490: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-268-6424
Drum Cover

002686424
176F720: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-268-6427
Cover Insert

002686427
117D2301: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-268-6422
Drum Cover

002686422
176F553: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-267-6740
Gun Drive Assembly Motor Housing

002676740
36B506201AEP1: RNCC: 3 | RNVC: 2
1005002676740: RNCC: 6 | RNVC: 9

18 Jul 1973

1005-00-264-8864
Bracket Assembly

002648864
12000623: RNCC: 3 | RNVC: 2

13 Jul 1973

1005-00-264-8863
Support Butt

002648863
12000625: RNCC: 3 | RNVC: 2
1005002648863: RNCC: 6 | RNVC: 9

13 Jul 1973

1005-00-264-8865
Ammunition Bracket

002648865
12000631: RNCC: 3 | RNVC: 2
1005002648865: RNCC: 6 | RNVC: 9

13 Jul 1973

1005-00-257-1032
Tie Bar

002571032
10545693: RNCC: 3 | RNVC: 2
1005002571032: RNCC: 6 | RNVC: 9

19 Mar 1971

1005-00-256-3272
Ammunition Chute

002563272
S12-1450: RNCC: 3 | RNVC: 2

15 Mar 1971

1005-00-255-2868
Ammunition Chute

002552868
175F507-4: RNCC: 1 | RNVC: 2
0721C13069: RNCC: 3 | RNVC: 2

23 Jul 1969

1005-00-255-2867
Ammunition Chute

002552867
0621D12608: RNCC: 3 | RNVC: 2
905D370-5: RNCC: 5 | RNVC: 9

23 Jul 1969

1005-00-253-7641
Chute Retainer Assembly

002537641
66C12601: RNCC: 3 | RNVC: 2
66C12601: RNCC: 5 | RNVC: 2

18 Jul 1969

1005-00-252-7829
Azimuth Sleeve

002527829
216-29416-1: RNCC: 3 | RNVC: 2

19 Jun 1970

1005-00-252-7830
Stabilizer Fork

002527830
216-29418-4: RNCC: 3 | RNVC: 2
216-29418: RNCC: D | RNVC: 9

19 Jun 1970

1005-00-252-3835
Lh Door Adapter

002523835
12S852-807: RNCC: 3 | RNVC: 2

17 Jun 1970

1005-00-252-3564
Front Swivel Assy

002523564
30510: RNCC: 3 | RNVC: 9

17 Jun 1970

1005-00-250-1938
Firing Pin Sleeve

002501938
2838215: RNCC: 3 | RNVC: 2
BUWEPSDWG2838215: RNCC: 3 | RNVC: 2
BUWEPSDWG2838215: RNCC: 5 | RNVC: 9

21 Feb 1969

1005-00-250-1939
Breechblock Plug

002501939
2838223: RNCC: 3 | RNVC: 2

21 Feb 1969

1005-00-250-1906
Cylinder Sleeve

002501906
BUWEPSDWG814833: RNCC: 3 | RNVC: 2
814833: RNCC: 3 | RNVC: 2
814833: RNCC: 5 | RNVC: 2
BUWEPSDWG814833: RNCC: 5 | RNVC: 9

21 Feb 1969

1005-00-250-1913
Charger Sleeve

002501913
BUWEPSDWG1236126: RNCC: 3 | RNVC: 2
1236126: RNCC: 3 | RNVC: 2
BUWEPSDWG1236126: RNCC: 5 | RNVC: 9

21 Feb 1969

1005-00-248-1782
Gun Bolt Tool

002481782
BUWEPSK409163: RNCC: 3 | RNVC: 2
SK409163: RNCC: 3 | RNVC: 2
SK409163: RNCC: 5 | RNVC: 2
BUWEPSK409163: RNCC: 5 | RNVC: 9
SK409163: RNCC: 5 | RNVC: 9

19 Feb 1969

1005-00-248-1781
Tool Case

002481781
2838221: RNCC: 3 | RNVC: 2
BUWEPSDWG2838221: RNCC: 3 | RNVC: 2
2838221: RNCC: 5 | RNVC: 2
BUWEPSDWG2838221: RNCC: 5 | RNVC: 9
2838221: RNCC: 5 | RNVC: 9

19 Feb 1969

1005-00-248-1779
Gun Tool Assembly

002481779
1265892: RNCC: 3 | RNVC: 2

19 Feb 1969

1005-00-246-9987
Connector Box Plug

002469987
8436651: RNCC: 3 | RNVC: 2

5 Jan 1972

1005-00-246-9981
Firin Post Assembly

002469981
8447638: RNCC: 3 | RNVC: 2

28 Dec 1971

1005-00-246-9988
Aircraft Gun Mounting Adapter

002469988
8436649: RNCC: 3 | RNVC: 2

5 Jan 1972

1005-00-246-5109
Base Assembly

002465109
SK231704: RNCC: 3 | RNVC: 2
BUWEPS SK231704: RNCC: 3 | RNVC: 2
SK231704: RNCC: 3 | RNVC: 2
SK231704: RNCC: 5 | RNVC: 9
BUWEPS SK231704: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5107
Support Tray

002465107
SK231788: RNCC: 3 | RNVC: 2
BUWEPS SK231788: RNCC: 3 | RNVC: 2
SK231788: RNCC: 3 | RNVC: 2
BUWEPS SK231788: RNCC: 5 | RNVC: 9
SK231788: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5093
Side Plate

002465093
BUWEPS SK231747: RNCC: 3 | RNVC: 2
SK231747: RNCC: 3 | RNVC: 2
SK231747: RNCC: 3 | RNVC: 2
SK231747: RNCC: 5 | RNVC: 9
BUWEPS SK231747: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5106
Support Tray

002465106
BUWEPS SK231787: RNCC: 3 | RNVC: 2
SK231787: RNCC: 3 | RNVC: 2
BUWEPS SK231787: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5102
Detent Assembly

002465102
SK231791: RNCC: 3 | RNVC: 2

14 Feb 1969

1005-00-246-5097
Extension Tray

002465097
BUWEPS SK404535: RNCC: 3 | RNVC: 2
SK404535: RNCC: 3 | RNVC: 2
BUWEPS SK404535: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5100
Load Machine Tray

002465100
SK404546: RNCC: 3 | RNVC: 2

14 Feb 1969

1005-00-246-5104
Support Load Machine

002465104
SK231784: RNCC: 3 | RNVC: 2
BUWEPS SK231784: RNCC: 3 | RNVC: 2
SK231784: RNCC: 3 | RNVC: 2
BUWEPS SK231784: RNCC: 5 | RNVC: 9
SK231784: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5105
Channel

002465105
SK231785: RNCC: 3 | RNVC: 2
BUWEPS SK231785: RNCC: 3 | RNVC: 2
SK231785: RNCC: 3 | RNVC: 2
SK231785: RNCC: 5 | RNVC: 9
BUWEPS SK231785: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5089
Support Retainer

002465089
BUWEPS SK231743: RNCC: 3 | RNVC: 2
SK231743: RNCC: 3 | RNVC: 2
BUWEPS SK231743: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5088
Delinking Retainer

002465088
BUWEPS SK231742: RNCC: 3 | RNVC: 2
SK231742: RNCC: 3 | RNVC: 2
BUWEPS SK231742: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5085
Load Machine Strip

002465085
BUWEPS SK231739: RNCC: 3 | RNVC: 2
SK231739: RNCC: 3 | RNVC: 2
BUWEPS SK231739: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5092
Support Retainer

002465092
BUWEPS SK231746: RNCC: 3 | RNVC: 2
SK231746: RNCC: 3 | RNVC: 2
BUWEPS SK231746: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5080
Trunnion

002465080
BUWEPS SK231722: RNCC: 3 | RNVC: 2
SK231722: RNCC: 3 | RNVC: 2
BUWEPS SK231722: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5087
Delinking Retainer

002465087
BUWEPS SK231741: RNCC: 3 | RNVC: 2
SK231741: RNCC: 3 | RNVC: 2
BUWEPS SK231741: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5091
Linking Retainer

002465091
SK231745: RNCC: 3 | RNVC: 2

14 Feb 1969

1005-00-246-5095
Load Machine Guide

002465095
BUWEPS SK231749: RNCC: 3 | RNVC: 2
SK231749: RNCC: 3 | RNVC: 2
BUWEPS SK231749: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5086
Link Support Plate

002465086
SK231740: RNCC: 3 | RNVC: 2
BUWEPS SK231740: RNCC: 3 | RNVC: 2
SK231740: RNCC: 3 | RNVC: 2
SK231740: RNCC: 5 | RNVC: 9
BUWEPS SK231740: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5090
Linking Retainer

002465090
BUWEPS SK231744: RNCC: 3 | RNVC: 2
SK231744: RNCC: 3 | RNVC: 2
BUWEPS SK231744: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5078
Sprocket Shaft

002465078
BUWEPS SK231721: RNCC: 3 | RNVC: 2
SK231721: RNCC: 3 | RNVC: 2
BUWEPS SK231721: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5081
Linking Guide

002465081
BUWEPS SK231727: RNCC: 3 | RNVC: 2
SK231727: RNCC: 3 | RNVC: 2
BUWEPS SK231727: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5084
Support Plate

002465084
BUWEPS SK231738: RNCC: 3 | RNVC: 2
SK231738: RNCC: 3 | RNVC: 2
BUWEPS SK231738: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5083
Detent Insert

002465083
BUWEPS SK231737: RNCC: 3 | RNVC: 2
SK231737: RNCC: 3 | RNVC: 2
BUWEPS SK231737: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5079
Link Loader Shaft

002465079
BUWEPS SK231717: RNCC: 3 | RNVC: 2
SK231717: RNCC: 3 | RNVC: 2
BUWEPS SK231717: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5082
Detent Insert

002465082
BUWEPS SK231736: RNCC: 3 | RNVC: 2
SK231736: RNCC: 3 | RNVC: 2
BUWEPS SK231736: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5077
Plate Cover

002465077
SK231707: RNCC: 3 | RNVC: 2
BUWEPS SK231707: RNCC: 3 | RNVC: 2
SK231707: RNCC: 3 | RNVC: 2
SK231707: RNCC: 5 | RNVC: 9
BUWEPS SK231707: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5075
Bearing Support

002465075
BUWEPS SK231705: RNCC: 3 | RNVC: 2
SK231705: RNCC: 3 | RNVC: 2
SK231705: RNCC: 3 | RNVC: 2
BUWEPS SK231705: RNCC: 5 | RNVC: 9
SK231705: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-246-5076
Gear Housing Support

002465076
BUWEPSSK231706: RNCC: 3 | RNVC: 2
SK231706: RNCC: 3 | RNVC: 2
BUWEPSSK231706: RNCC: 5 | RNVC: 9

14 Feb 1969

1005-00-241-9186
Torque Shaft

002419186
12S421-1: RNCC: 3 | RNVC: 2

27 Jun 1969

1005-00-241-0035
Reticle Cell Ring

002410035
8431-173: RNCC: 3 | RNVC: 9
8437-173: RNCC: 5 | RNVC: 9

5 Nov 1969

1005-00-238-6143
Airplane Cir Tester

002386143
2537896: RNCC: 3 | RNVC: 2

2 Nov 1970

1005-00-237-3845
Tr Adapter Assembly

002373845
30F73436-15: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-235-8299
Gun Firing Control Assembly

002358299
188F683: RNCC: 3 | RNVC: 2
216-27209-3: RNCC: 5 | RNVC: 2

24 Oct 1969

1005-00-235-3031
Armament Pod Fairing

002353031
8448024: RNCC: 3 | RNVC: 2

23 Jun 1969

1005-00-234-7415
Ro Counter Assembly

002347415
65C9887: RNCC: 3 | RNVC: 2

5 Jan 1968

1005-00-232-6170
Ch Bracket Assembly

002326170
11691277: RNCC: 3 | RNVC: 2

24 Oct 1970

1005-00-228-1974
Blank Ammunition Firing Attachment

002281974
2846729-1: RNCC: 3 | RNVC: 2

19 Feb 1969

1005-00-228-1975
Blank Ammunition Firing Attachment

002281975
2846729-2: RNCC: 3 | RNVC: 2

14 Feb 1969

1005-00-226-5057
Gun Mount Bracket

002265057
6-86054-5: RNCC: 3 | RNVC: 9
6-86054-5: RNCC: C | RNVC: 1

3 Jan 1968

1005-00-226-5061
Gun Mount Base Assy

002265061
6-86049-3: RNCC: 3 | RNVC: 9
6-86049-3: RNCC: C | RNVC: 1

3 Jan 1968

1005-00-226-5055
Gun Mount Base Assy

002265055
6-86049-4: RNCC: 3 | RNVC: 9
6-86049-4: RNCC: C | RNVC: 1

3 Jan 1968

1005-00-226-5033
Gun Mount Bracket

002265033
6-86054-6: RNCC: 3 | RNVC: 9
6-86054-6: RNCC: C | RNVC: 1

3 Jan 1968

1005-00-225-1965
Ejection Chute

002251965
11698254: RNCC: 3 | RNVC: 2

18 Mar 1970

1005-00-224-4608
Power Su Board Assy

002244608
68B6490: RNCC: 3 | RNVC: 2

16 Mar 1970

1005-00-222-6772
Wing A Pin Assembly

002226772
30F73767-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-222-5031
Gun Mount Grip Assembly

002225031
701-2103: RNCC: 3 | RNVC: 2

9 May 1973

1005-00-221-5424
Gun Mount Plate

002215424
11838531: RNCC: 3 | RNVC: 2

16 Jun 1969

1005-00-221-3328
Take-0 Booster Assy

002213328
101D4286: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3241
Feeder Shaft

002213241
7791565: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3207
Automatic Gun Feeder

002213207
116C3153: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3192
Extensio Drive Assy

002213192
116C3210: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3204
Drive Booster Spacer

002213204
135B6440: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3193
Ammunition Chute

002213193
0621D12405: RNCC: 3 | RNVC: 2
175F885-1: RNCC: 7 | RNVC: 2

31 Jan 1969

1005-00-221-3195
Ammunition Chute

002213195
0621D12404: RNCC: 3 | RNVC: 2
175F885-2: RNCC: 7 | RNVC: 2

31 Jan 1969

1005-00-221-3199
Firing Repositioner Assy

002213199
135B6434: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-221-3089
Feeder Rear Guide

002213089
135B6433: RNCC: 3 | RNVC: 2

31 Jan 1969

1005-00-220-9170
Cradle Extension

002209170
BUWEPSDWG2658374: RNCC: 3 | RNVC: 2
2658374: RNCC: 3 | RNVC: 2
BUWEPSDWG2658374: RNCC: 5 | RNVC: 9

31 Jan 1969

1005-00-220-9167
Support Weldment As

002209167
BUWEPSDWG2658376: RNCC: 3 | RNVC: 2
2658376: RNCC: 3 | RNVC: 2
BUWEPSDWG2658376: RNCC: 5 | RNVC: 9
76: RNCC: 5 | RNVC: 9

31 Jan 1969

1005-00-220-9160
Ammunition Can Lid

002209160
BUWEPSDWG2658372: RNCC: 3 | RNVC: 2
2658372: RNCC: 3 | RNVC: 2
BUWEPSDWG2658372: RNCC: 5 | RNVC: 9

31 Jan 1969

1005-00-220-2042
Cup Machine Gun Cam

002202042
10873148: RNCC: 3 | RNVC: 2

29 Jan 1969

1005-00-216-6291
Left Han Clutch Cam

002166291
29975-1: RNCC: 3 | RNVC: 2
29975-1: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-214-0913
Ring

002140913
8396610: RNCC: 3 | RNVC: 2
1005002140913: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-213-7822
Gun End

002137822
C9879-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-213-7821
Gun End

002137821
C9879-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-7608
Automatic Gun Feeder

002117608
1212B13259: RNCC: 3 | RNVC: 2

15 Apr 1973

1005-00-211-7610
Box End Chute

002117610
1312C14063: RNCC: 3 | RNVC: 2

15 Apr 1973

1005-00-211-7609
Chute Link

002117609
1212B13369: RNCC: 3 | RNVC: 2

15 Apr 1973

1005-00-211-7605
Chute Feed Assembly

002117605
1321C12978: RNCC: 3 | RNVC: 2

15 Apr 1973

1005-00-211-6794
Mounting Drive Cap

002116794
33019-2: RNCC: 3 | RNVC: 2
33019-2: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-211-6812
Flex Chute Assembly

002116812
2813700: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-211-6671
Gun End Fle Adapter

002116671
H250LG7NX: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-0919
Wing Latch Assembly

002110919
37W73205-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-0810
Ammunition Chute Assembly

002110810
37F73341-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-0680
Gun Charger C Guard

002110680
30X73758-1L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-0594
Ammunition Chute Assembly

002110594
30F73732-2L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-211-0595
Ammunition Chute Assembly

002110595
30F73732-2R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-210-3844
Tool

002103844
394250: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-210-2902
Grease Container

002102902
299818PC3: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-210-2900
Bolt And Pin

002102900
299794: RNCC: 3 | RNVC: 2
299794-1-4: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-210-2889
Trigger Plate

002102889
299693: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-210-2867
Instruction Chart

002102867
B0280200010: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-199-7304
Repositioner Assembly

001997304
8447668: RNCC: 3 | RNVC: 2

27 Jan 1969

1005-00-199-3954
Ammunition Chute

001993954
216-29224-3: RNCC: 1 | RNVC: 3
162B8085: RNCC: 3 | RNVC: 3

23 Mar 1973

1005-00-193-0449
Ammunition Magazine Assembly

001930449
5829870-501: RNCC: 3 | RNVC: 2

6 Mar 1970

1005-00-193-0438
Ammunition Chute

001930438
5829872-1: RNCC: 3 | RNVC: 2
5900074: RNCC: C | RNVC: 1

6 Mar 1970

1005-00-193-0437
Ammunition Latch Assembly

001930437
3829885-1: RNCC: 3 | RNVC: 2

6 Mar 1970

1005-00-193-0436
Ammunition Magazine Assembly

001930436
5829870-503: RNCC: 3 | RNVC: 2
5829870-503: RNCC: 5 | RNVC: 2
5829870-503: RNCC: 5 | RNVC: 2
5829870-503: RNCC: 5 | RNVC: 2

6 Mar 1970

1005-00-189-8250
Gun Pod Link Chute

001898250
SK4900321: RNCC: 3 | RNVC: 2

24 Feb 1971

1005-00-189-8242
Gun Pod Case Chute

001898242
SK4900325: RNCC: 3 | RNVC: 2
1350AS133: RNCC: 5 | RNVC: 9

24 Feb 1971

1005-00-189-0429
Ammunition Chute Assembly

001890429
151-61095-6: RNCC: 3 | RNVC: 2
110-1208-3: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-188-6968
Automatic Gun Feeder

001886968
139C6551: RNCC: 3 | RNVC: 2

14 Mar 1973

1005-00-188-6969
Unload-Drive Assembly

001886969
176F727: RNCC: 3 | RNVC: 2
176F727: RNCC: 5 | RNVC: 2
176F727: RNCC: 5 | RNVC: 2

14 Mar 1973

1005-00-188-3751
Cam Follower Latch

001883751
65751-03027-108: RNCC: 3 | RNVC: 2

19 Feb 1971

1005-00-187-9970
Package Fairing Assembly

001879970
159-61032: RNCC: 3 | RNVC: 2
159-61032: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-187-8864
Drive Insert

001878864
201F488-5: RNCC: 1 | RNVC: 2
73-44-049: RNCC: 3 | RNVC: 2

7 Mar 1973

1005-00-187-8863
Gear Hub

001878863
201F488-4: RNCC: 1 | RNVC: 2
12-38-008-15: RNCC: 3 | RNVC: 2

7 Mar 1973

1005-00-187-8504
Ammunition Chute Assembly

001878504
151-61095-2: RNCC: 3 | RNVC: 2
110-1208-1-21: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-187-6881
Ammunition Feed Lug

001876881
30F73726-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-187-6880
Adapter Assembl Cam

001876880
30F73031-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-185-8694
Fifty Caliber Plug

001858694
151-61196: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-185-8693
Fifty Caliber Plug

001858693
151-61172: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-185-1107
Gun Charger

001851107
30X73760-1R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-181-1727
Fi Adapter Assembly

001811727
30F73023-5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-181-1737
Fusel Door Assembly

001811737
30F73648-1R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-179-1280
Ammunition Chute

001791280
0621D13293: RNCC: 3 | RNVC: 2

20 Jun 1969

1005-00-178-8270
Retainer Bracket

001788270
135B6697: RNCC: 3 | RNVC: 2

17 Mar 1969

1005-00-177-8631
Brush

001778631
299816PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-176-8288
Stop Rod Pin

001768288
482476: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-176-8286
Trigger Link Pin

001768286
482502: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-176-1558
Pin

001761558
299653PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-5716
Rear Gun Mount Base

001755716
6-86051-1: RNCC: 3 | RNVC: 9
6-86051-1: RNCC: C | RNVC: 1

8 Dec 1971

1005-00-175-3588
Wire Jumper

001753588
SP29268: RNCC: 3 | RNVC: 2

27 Nov 1971

1005-00-175-3510
Bushing

001753510
299894PC3: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-2339
Plate

001752339
375781PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2340
Plate

001752340
375781PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2090
Facepiecee

001752090
299651PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2088
Block

001752088
299652PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2070
Plate

001752070
299671PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2078
Gun Recoil Sear

001752078
299665PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2077
Ring

001752077
299665PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2066
Lever

001752066
299673PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2069
Handle

001752069
299672PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2067
Plunger

001752067
299672PC5: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-2068
Catch

001752068
299672PC2: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-2048
Lever

001752048
299680PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2054
Plate

001752054
299677PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2052
Buffer

001752052
299678PC4: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-2049
Machine Gun Breech Lock

001752049
299680PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2057
Ring

001752057
299676PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2050
Catch

001752050
299679PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2031
Holder

001752031
299692PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2033
Lever

001752033
299690PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2037
Plunger

001752037
299687PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2042
Holder

001752042
299684PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2038
Plunger

001752038
299687PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2047
Rod

001752047
299680PC6: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2036
Lever

001752036
299689PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-2035
Lever

001752035
299689PC2: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-2040
Hook

001752040
299686PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1258
Bar

001751258
367784PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1259
Bar

001751259
367785PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1244
Plate Assembly

001751244
367744PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1254
Band Assembly

001751254
367776PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1251
Mouthpiece

001751251
367752PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-1250
Casing

001751250
367751PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-1245
Weldment Grip

001751245
367746PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1246
Weldment Grip

001751246
367746PC2: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-1239
Strap

001751239
367728PC3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1233
Spanner

001751233
367711PC1: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-175-1242
Magazine Guide

001751242
367736PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1241
Trigger Guard

001751241
367735PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1229
Plunger

001751229
367700PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1227
Handle Assembly

001751227
367700PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1221
Cam Stop Rod Ball

001751221
482480: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1228
Lock Handle

001751228
367700PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1226
Lever

001751226
367689PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1212
Support Assembly

001751212
367647PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-175-1222
Shaft Assembly

001751222
BUWEPSDWG482481: RNCC: 3 | RNVC: 2
482481: RNCC: 3 | RNVC: 2
BUWEPSDWG482481: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-172-3565
Machine Gun Cradle

001723565
11691312: RNCC: 3 | RNVC: 2

1 Sep 1972

1005-00-172-3566
Empty Cartridge Bag Stop

001723566
11691580: RNCC: 3 | RNVC: 2

1 Sep 1972

1005-00-169-6945
Ammunition Box Magazine

001696945
11686844: RNCC: 3 | RNVC: 2

3 Apr 1968

1005-00-169-6695
Gun Cap Body

001696695
AC07000: RNCC: 3 | RNVC: 2

19 Aug 1972

1005-00-169-6689
Gu Plunger Assembly

001696689
AC07010: RNCC: 3 | RNVC: 2
7R178: RNCC: 5 | RNVC: 2
7R178: RNCC: 6 | RNVC: 9

19 Aug 1972

1005-00-169-1758
Locking Bar

001691758
F187866: RNCC: 3 | RNVC: 9
F187866: RNCC: 5 | RNVC: 2
26FX768: RNCC: 5 | RNVC: 9
26FX768: RNCC: C | RNVC: 1

18 Jun 1971

1005-00-169-0922
Handles Rod Cleanin

001690922
ARM1E2036-2: RNCC: 3 | RNVC: 2
00-169-0922: RNCC: 6 | RNVC: 9

13 Jan 1971

1005-00-169-0926
Parts Drill 30 Mm

001690926
DGL1345G: RNCC: 3 | RNVC: 2
DLG1345G: RNCC: 5 | RNVC: 2
12C884: RNCC: 6 | RNVC: 9

13 Jan 1971

Load More Results