What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 88 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 88 of 125

1005-00-615-0307
Elevating Body

006150307
6150307: RNCC: 3 | RNVC: 2
6150307: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-614-7058
Bayonet Catch

006147058
6147058: RNCC: 3 | RNVC: 9
6147058: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-614-6270
Carriage Clamp

006146270
6146270: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-614-5908
Demand B Shell Assy

006145908
2-00003-506: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-614-5907
Demand B Shell Assy

006145907
2-00003-505: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-614-3181
Side Plate Trigger Slide

006143181
6143181: RNCC: 3 | RNVC: 2
A10886: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-614-2488
Mount Pintle

006142488
6142488: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-614-0648
Housing

006140648
6140648: RNCC: 3 | RNVC: 9
6140648: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-612-9180
Gun Saddle

006129180
176F209: RNCC: 3 | RNVC: 2

17 Oct 1969

1005-00-612-9077
Elevation Drive Cover

006129077
116C3607: RNCC: 3 | RNVC: 2

17 Oct 1969

1005-00-612-9071
Resolver Cover

006129071
116C3610: RNCC: 3 | RNVC: 2

17 Oct 1969

1005-00-612-8417
Sleeve

006128417
514500C: RNCC: 3 | RNVC: 2
6128417: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-612-8407
Cutoff

006128407
6128407: RNCC: 3 | RNVC: 2
6128407: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-612-8412
La Butt Plate Screw

006128412
6128412: RNCC: 3 | RNVC: 2
6128412: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-9980
Ejection Chute

006109980
4-01888-000: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-610-8881
Pintle Support

006108881
6108881: RNCC: 3 | RNVC: 2
6108881: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-8802
Plate

006108802
6108802: RNCC: 3 | RNVC: 2
6108802: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-7722
Tube Supply Assy

006107722
871940: RNCC: 3 | RNVC: 2
871940: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-7606
Cylinder Plug

006107606
207489: RNCC: 3 | RNVC: 2
207489: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-0078
20 Ammunition Chute

006100078
0628C1972: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-608-5299
Ammunition Feed Pawl

006085299
7269332: RNCC: 3 | RNVC: 2
3040006085299: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5180
Sear Plunger

006085180
7269207: RNCC: 3 | RNVC: 2
1005006085180: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5176
Trigger Housing

006085176
7269203: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-608-5179
Safety Plunger

006085179
7269206: RNCC: 3 | RNVC: 2
7269206: RNCC: 5 | RNVC: 2
7269206: RNCC: 5 | RNVC: 2
7269206: RNCC: 5 | RNVC: 2
7269206: RNCC: 5 | RNVC: 9
1005006085179: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5093
Ammunition Feed Pawl

006085093
7269120: RNCC: 3 | RNVC: 2
1005006085093: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5119
Spring Lever Clip

006085119
7269146: RNCC: 3 | RNVC: 2
1005006085119: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5113
Cover Shield

006085113
7269140: RNCC: 3 | RNVC: 2
1005006085113: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5097
Feed Cam Retainer

006085097
7269124: RNCC: 3 | RNVC: 2
1005006085097: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5090
Small Arms Cartridge Guide

006085090
7269117: RNCC: 3 | RNVC: 2
1005006085090: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5089
Small Arms Cartridge Guide

006085089
7269116: RNCC: 3 | RNVC: 2
1005006085089: RNCC: 6 | RNVC: 9
10056085039: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5021
Machine Gun Bipod Leg

006085021
7269047: RNCC: 3 | RNVC: 2
1005006085021: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5002
Gun Barrel Assembly

006085002
7269028: RNCC: 3 | RNVC: 2
1005006085002: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-1303
Hatch Lock

006081303
8683156: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-608-1295
Crash Pad Assembly

006081295
8683054: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-608-1302
Hatch Lock

006081302
8683155: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-607-4315
Firing Pin Spring Plug

006074315
BUWEPSDWG1676936: RNCC: 3 | RNVC: 2
1676936: RNCC: 3 | RNVC: 2
BUWEPSDWG1676936: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-607-4222
Firing Assy Pin

006074222
BUWEPSDWG1810821: RNCC: 3 | RNVC: 2
1810821: RNCC: 3 | RNVC: 2
BUWEPSDWG1810821: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-607-2394
Link Assy Chute

006072394
7027470: RNCC: 3 | RNVC: 2
A20208: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-607-2393
Link Chute

006072393
7027467: RNCC: 3 | RNVC: 2
A20207: RNCC: 5 | RNVC: 2
1005006072393: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-607-0600
Feed Mechanism

006070600
LD266061: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-605-4203
Chute Adapter Assy

006054203
774145-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-605-2204
Periscope Guard

006052204
8335224: RNCC: 3 | RNVC: 2
1005006052204: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-605-0554
Guide Bar

006050554
196C649G1: RNCC: 3 | RNVC: 2
7269918: RNCC: 5 | RNVC: 9
1005006050554: RNCC: 6 | RNVC: 9
7269918: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-604-6035
Ejection Chute Assy

006046035
7738945: RNCC: 3 | RNVC: 2
A20205: RNCC: 5 | RNVC: 2
7738945: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-604-0254
Clutch Hub Assy

006040254
HB728A: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-603-9595
End Plate

006039595
7269889: RNCC: 3 | RNVC: 9
7269889: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-603-2038
Clutch Hub

006032038
HB721: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-603-1297
Bolt Receiver Guide

006031297
7268393: RNCC: 3 | RNVC: 2
1005006031297: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-602-4229
Slider And Tube Assembly

006024229
CV15-409060-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-601-9864
Mk16 Mod4 Barrel

006019864
1615600: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-601-9854
Barrel

006019854
1615590: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-600-8891
Small Arms Stacking Swivel

006008891
6008891: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8883
Hammer Spring Housing

006008883
6008883: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8890
Small Arms Sling Swivel

006008890
6008890: RNCC: 3 | RNVC: 2
6008890: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-600-8880
Small Arms Firing Hammer

006008880
6008880: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8872
Rear Sight Cover

006008872
6008872: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8599
Firing Pin

006008599
6008599: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8598
Cartridge Extractor

006008598
6008598: RNCC: 3 | RNVC: 2
6008598: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-600-8597
Recoil Spring Guide

006008597
6008597: RNCC: 3 | RNVC: 2
6008597: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-593-0119
Shelf Release Assy

005930119
750741-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-592-4642
Booste Fitting Assy

005924642
760784: RNCC: 3 | RNVC: 2
770316-1: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-591-0698
20 Charger Gun Ball

005910698
10812-14: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-591-0032
Rh Switch Cam

005910032
8410646: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-591-0039
Sleeve Assembly

005910039
8420271: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-591-0033
Lh Switch Cam

005910033
8410647: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-591-0038
Firing Con Pin Assy

005910038
8420270: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-590-4093
Ejection Chute

005904093
12-4101-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-589-9813
Boresigh Plate Assy

005899813
771705-1: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-587-8421
Valve Spindle

005878421
7267604: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-8420
Selector Shaft Lock

005878420
7267172: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-8390
Bolt Lock

005878390
7267034: RNCC: 3 | RNVC: 2
1005005878390: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-587-8385
Operating Rod Guide

005878385
7267025: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-8386
Rod Operating Guide

005878386
7267027: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-8381
Cartridge Ejector

005878381
7267015: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-8375
Gun Hand Guard And Stock Retaining Band

005878375
7267001: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-6517
Am Booster Sprocket

005876517
727581-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-3138
Tube Assy

005873138
CV15-409096-2: RNCC: 3 | RNVC: 2

1 Jan 1956

1005-00-587-3134
Ammunition Chute

005873134
CV15-409092-4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-587-1231
Locking Plate

005871231
1169100: RNCC: 3 | RNVC: 2
1169100: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-586-7774
Lock-Release Lever

005867774
7268362: RNCC: 3 | RNVC: 2
0740603: RNCC: 5 | RNVC: 2
A10675: RNCC: 5 | RNVC: 2
1005005867774: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-586-0775
Barrel Link

005860775
7267772: RNCC: 3 | RNVC: 2
7267771: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-586-0776
Barrel Link

005860776
7267773: RNCC: 3 | RNVC: 2
7267771: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-583-8084
Muzzle Clamp Assembly

005838084
105D3533: RNCC: 3 | RNVC: 2

21 Dec 1974

1005-00-576-3962
Gun Control Link

005763962
MC14116: RNCC: 3 | RNVC: 2
MC14116: RNCC: 5 | RNVC: 9

11 Dec 1974

1005-00-575-6183
Ammuni Housing Assy

005756183
760776-601: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-575-2876
Drum Shaft

005752876
8420264: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-575-0694
7.62 Mm Cartridge Stabilizer

005750694
11690474: RNCC: 3 | RNVC: 2
717701-301: RNCC: 5 | RNVC: 9

19 Jan 1968

1005-00-575-0073
Survival .410 Gage Caliber .22-Shotgun Rifle

005750073
5750073: RNCC: 3 | RNVC: 2
113512N1: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-574-7202
Booster Assembly

005747202
182-2100-1-02: RNCC: 3 | RNVC: 2
182-2100-1-02: RNCC: 5 | RNVC: 9
182-2100-1-02: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-574-7203
Booster Assembly

005747203
182-2100-0-02: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-574-1797
Mount Fitting

005741797
FDC2650M23: RNCC: 3 | RNVC: 2
67B4515: RNCC: 7 | RNVC: 2

17 Jan 1968

1005-00-574-1449
Chute Strap Assy

005741449
FDC1730-187: RNCC: 3 | RNVC: 2
67C4510: RNCC: 7 | RNVC: 2

17 Jan 1968

1005-00-574-1086
Pintle Mou Retainer

005741086
67B4503: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-574-1056
Pintle Mount Bail

005741056
67B4502: RNCC: 3 | RNVC: 2
67B4502: RNCC: 5 | RNVC: 9

17 Jan 1968

1005-00-573-9638
Aft Boresight Socket

005739638
2446270-502: RNCC: 3 | RNVC: 2
2446270-502: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-573-9637
Aft Boresight Socket

005739637
2446270-501: RNCC: 3 | RNVC: 2
2446270-501: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-573-8912
No 3 Chute

005738912
1499537: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-8910
No 1 Chute

005738910
1499534: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-8911
No 2 Chute

005738911
1499536: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-8890
Guide

005738890
1291995: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-8887
Shaft

005738887
1291941: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-6835
Lh Chute Assembly

005736835
206-1172-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-6836
Plug Assy

005736836
4544932: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-6837
Link Ejector Assembly

005736837
12-7002: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-573-6832
Cover Assembly

005736832
5543634-15: RNCC: 3 | RNVC: 2
5543634-15: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-573-6833
Cover Assembly

005736833
5543634-16: RNCC: 3 | RNVC: 2
5543634-16: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-573-6831
Magazine Assembly

005736831
5543634-2: RNCC: 3 | RNVC: 2
5543634-2: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-573-6834
Ammunition Chute Assembly

005736834
206-1172-0: RNCC: 3 | RNVC: 2
206-1172-0: RNCC: 5 | RNVC: 9
206-1172-0: RNCC: 5 | RNVC: 9
206-1172-0: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-573-6830
Ammunition Magazine Assembly

005736830
5543634-1: RNCC: 3 | RNVC: 2
5543634-1: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-573-4121
Pintle Mount Suppor

005734121
65751-03003-101: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-573-4107
E Mount Suppor

005734107
65751-03003-102: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-573-4085
Pintle Gun Mount

005734085
65751-03003-041: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-572-3158
Ammunition Chute

005723158
201F979: RNCC: 3 | RNVC: 2
201F575: RNCC: 5 | RNVC: 2

4 Dec 1974

1005-00-571-4630
Buffer Collar

005714630
2094218: RNCC: 3 | RNVC: 2
BUWEPSDWG2094218: RNCC: 5 | RNVC: 9

17 Jan 1968

1005-00-571-4497
Rod Declutch Swivel

005714497
BUWEPSDWG2248416: RNCC: 3 | RNVC: 2
2248416: RNCC: 3 | RNVC: 2
BUWEPSDWG2248416: RNCC: 5 | RNVC: 9

17 Jan 1968

1005-00-570-3900
Spring Guide

005703900
MC14097: RNCC: 3 | RNVC: 2
MC14097: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3903
Valve Plunger

005703903
MC14103: RNCC: 3 | RNVC: 2
MC14103: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3876
Gun Control Poppet

005703876
MC14109: RNCC: 3 | RNVC: 2
MC14109: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3877
Gun Control Plug

005703877
MC14108: RNCC: 3 | RNVC: 2
MC14108: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3886
Spring Plate

005703886
MC14087: RNCC: 3 | RNVC: 2
MC14087: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3887
Piston Guide

005703887
MC14089: RNCC: 3 | RNVC: 2
MC14089: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3870
Gun Control Orifice

005703870
MC14112: RNCC: 3 | RNVC: 2
MC14112: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3858
Control Plate

005703858
MC8726: RNCC: 3 | RNVC: 2
MC8726: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3840
Actuating Gun Lever

005703840
105D3540: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3819
Ejection F Box Assy

005703819
37F73705-1: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-570-3745
Drum Drive Assembly

005703745
167C1021: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3768
Armor Plate

005703768
132D1076: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3739
Drum Armor Spacer

005703739
167C1004: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3740
Drum Armor Spacer

005703740
167C1005: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3722
Ammunition Drum Structure Assembly

005703722
198F216: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3715
Ammunition Drum Structure Assembly

005703715
198F288: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-569-5331
Stator Assembly

005695331
177-2003: RNCC: 3 | RNVC: 9
177-2003: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-567-3887
Ammun Actuator Assy

005673887
7268352: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-566-4065
Ammunition Box Assy

005664065
30F73611-11L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-566-3976
Gun Mount Fitting

005663976
765364-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-566-0042
Round Retainer

005660042
8410875: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-565-7583
Gun Charger Te Clip

005657583
11403: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-565-7564
Ejection Chut Cover

005657564
37F73362-11: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-565-6732
50 Caliber Ca Liner

005656732
151-61038-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-565-4083
Shimx Rive

005654083
7268674: RNCC: 3 | RNVC: 2
7268674: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4084
Comp Sprin Xhelical

005654084
7268774: RNCC: 3 | RNVC: 2
7268774: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4086
Brake Solen Id

005654086
7268810: RNCC: 3 | RNVC: 2
C8535A: RNCC: 5 | RNVC: 2
7268810: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4089
Gear Assy Retai Er

005654089
7269707: RNCC: 3 | RNVC: 2
7269707: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4090
Drive Shaft Gear

005654090
7269708: RNCC: 3 | RNVC: 2
7269708: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4082
Shimx Rive

005654082
7268673: RNCC: 3 | RNVC: 2
7268673: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-4087
Disk Assy Clutch

005654087
7268811: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-565-4092
Gearx Luster Assy

005654092
7269718: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-565-4081
Shimx Rive

005654081
7268672: RNCC: 3 | RNVC: 2
7268672: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-565-3429
Breech Bolt

005653429
5653429: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-565-3431
Magazine Filler

005653431
5653431: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-565-2797
Pintle Socket Cover

005652797
5652797: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-565-2801
Ammunition Tray Strap

005652801
5652801: RNCC: 3 | RNVC: 2
A20199: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-564-7444
Ammunition Chute

005647444
0634C729-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-564-7445
Ammunition Chute

005647445
0634C729-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-563-7806
Gun Control Assembly

005637806
189F901: RNCC: 3 | RNVC: 2

19 Nov 1974

1005-00-563-7166
Gun Mount Keeper

005637166
766403-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-563-7167
Ammunition End Assy

005637167
11627-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-563-5795
Cover Assembly

005635795
5635795: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-563-3575
Box Assy-Ammunition

005633575
243-61010-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-563-0606
Lock Assy Pin

005630606
7269701: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-563-0603
Firing Pin

005630603
7268303: RNCC: 3 | RNVC: 9
1005PL0961293: RNCC: 6 | RNVC: 9
1005005630603: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-562-8566
Joint Ball

005628566
764643: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-562-1049
Band

005621049
5621049: RNCC: 3 | RNVC: 2
5621049: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-562-0595
Spring M39 Gun

005620595
223-61045: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-561-3680
Bayonet Grip

005613680
5613680: RNCC: 3 | RNVC: 2
5613680: RNCC: 5 | RNVC: 2
5613680: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-561-3665
Shoulder Gun Stock Butt Plate

005613665
5613665: RNCC: 3 | RNVC: 2
5613665: RNCC: 5 | RNVC: 9
S-13: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-559-3814
Mounting Adapter

005593814
5593814: RNCC: 3 | RNVC: 2
C5593814: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-558-5226
Rear Entrance Housing

005585226
198F222: RNCC: 3 | RNVC: 2

11 Nov 1974

1005-00-558-5284
Gun System Exit Unit

005585284
189F926: RNCC: 3 | RNVC: 2

11 Nov 1974

1005-00-558-5216
Gun System Entrance Unit

005585216
189F925: RNCC: 3 | RNVC: 2

11 Nov 1974

1005-00-557-4683
Pintle Column Socket

005574683
5574683: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-556-8339
Trigger Case

005568339
5568339: RNCC: 3 | RNVC: 2
A10929: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-556-7119
Trigger

005567119
5567119: RNCC: 3 | RNVC: 2
A10891: RNCC: 5 | RNVC: 2
1005005567119: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-556-4183
Small Arms Cleaning Rod

005564183
5564183: RNCC: 3 | RNVC: 9
5564183: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-556-4173
Brush And Thong

005564173
5564173: RNCC: 3 | RNVC: 2
5564173: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-556-4175
Thong

005564175
409180: RNCC: 3 | RNVC: 2
5564175: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-556-4158
Gun Parts Can

005564158
5564158: RNCC: 3 | RNVC: 2
5564158: RNCC: 5 | RNVC: 2
5564158: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-556-1331
Chute

005561331
5561331: RNCC: 3 | RNVC: 2
ARMYDWG5561331: RNCC: 5 | RNVC: 2
A20140: RNCC: 5 | RNVC: 2
5561331: RNCC: 5 | RNVC: 2
10055561331: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-555-9807
Plate

005559807
5559807: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-555-9732
Tripod Mount Leg

005559732
5559732: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-555-7156
Bolt Assy

005557156
5557156: RNCC: 3 | RNVC: 2
5557156: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-555-7151
Operating Slide

005557151
5557151: RNCC: 3 | RNVC: 2
5557151: RNCC: 5 | RNVC: 2
5557151: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-555-7152
Small Arms Sling

005557152
5557152: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-554-6026
Trigger

005546026
5546026: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-554-5964
Rear Sight Leaf

005545964
5545964: RNCC: 3 | RNVC: 2
1005005545964: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-554-5961
Rear Sight

005545961
5545961: RNCC: 3 | RNVC: 2
5545961: RNCC: 5 | RNVC: 9
5545961: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-550-8694
Cartridge Magazine

005508694
5508694: RNCC: 3 | RNVC: 2
1005PL1337459: RNCC: 6 | RNVC: 9
6008606: RNCC: E | RNVC: 8

1 Jan 1963

1005-00-550-4086
Plate Assembly

005504086
5504086: RNCC: 3 | RNVC: 2
A10448: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-550-4071
Manual Contro Lever

005504071
5504071: RNCC: 3 | RNVC: 2
05415230000525: RNCC: 5 | RNVC: 1
201060014: RNCC: 5 | RNVC: 2
A10144: RNCC: 5 | RNVC: 2
3662004159: RNCC: 5 | RNVC: 2
1005005504071: RNCC: 6 | RNVC: 9
10093848: RNCC: 6 | RNVC: 9
1005PL1645616: RNCC: 6 | RNVC: 9
75F2016: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-547-7184
Transfer Housing Assembly

005477184
201F315: RNCC: 3 | RNVC: 2

12 Oct 1974

1005-00-547-7130
Ammunition Handling Sprocket

005477130
125C3438: RNCC: 3 | RNVC: 2

12 Oct 1974

1005-00-547-7124
Loader Housing

005477124
201F321: RNCC: 3 | RNVC: 2

12 Oct 1974

1005-00-547-2640
Adjus Lockbolt Assy

005472640
30F73602-5: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-545-2054
Drive Handle Rod Assembly

005452054
1675527: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-545-2055
Drive Handle

005452055
1675526: RNCC: 3 | RNVC: 2
1675526: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-544-9835
Extension Assy

005449835
8Z2531-900: RNCC: 3 | RNVC: 2
8Z2531PC900: RNCC: 3 | RNVC: 2
8Z2531-900: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-544-9261
Loading Machine

005449261
SK231702: RNCC: 3 | RNVC: 2
LD261651: RNCC: 3 | RNVC: 9
BUWEPSLD261651: RNCC: 5 | RNVC: 9
BUWEPSLD261651: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-544-9251
20Mm Mk12 T118 Gun

005449251
937792: RNCC: 3 | RNVC: 9
LD261656: RNCC: 5 | RNVC: 9
517143: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-544-9240
Feed Mechanism

005449240
1446392: RNCC: 3 | RNVC: 9
BUWEPSDWG1446392: RNCC: 5 | RNVC: 9
BUWEPSDWG1446392: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-544-4548
Mount Assy Gun Equi

005444548
80-02-0001-00: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-540-1855
Element Assy

005401855
A51K9053-5: RNCC: 1 | RNVC: 2
162B8643: RNCC: 3 | RNVC: 2
A51K9053-5: RNCC: 5 | RNVC: 9
A51K9053-5: RNCC: C | RNVC: 1

25 Sep 1974

1005-00-537-7989
Index Plate

005377989
5377989: RNCC: 3 | RNVC: 2
5377989: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-536-6586
Ce Guide Shelf Assy

005366586
764487: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-536-6587
Fo Guide Shelf Assy

005366587
764488: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-536-4902
Rear Unload Gate

005364902
139C6452: RNCC: 3 | RNVC: 2

22 Sep 1974

1005-00-536-4791
Ammunition Box Assy

005364791
30F73611-11R: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-536-4792
Ammunition Box Assy

005364792
30F73610-11L: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-536-4785
Square Roller

005364785
105D3429: RNCC: 3 | RNVC: 2

22 Sep 1974

1005-00-535-4183
Chute End Assembly

005354183
1321C16775: RNCC: 3 | RNVC: 2
1321C16041: RNCC: 5 | RNVC: 2

17 Sep 1974

1005-00-535-1210
Oiler Clip

005351210
5351210: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-534-9942
Sear-Trigger Spring Holder

005349942
5349942: RNCC: 3 | RNVC: 2
5349942: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-534-0246
Ammunition Bo Shaft

005340246
180-61019: RNCC: 3 | RNVC: 2
223-61019: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-534-0254
Cable Rh Shield

005340254
4-00727-002: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-534-0249
20Mm G Adapter Assy

005340249
11331: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-533-4160
Sear Actuator Assy

005334160
150111: RNCC: 3 | RNVC: 9
150111: RNCC: 5 | RNVC: 9
B11481: RNCC: 5 | RNVC: 9
92006: RNCC: 5 | RNVC: 9

1 Jan 1961

1005-00-533-4165
Rocker Re Insulator

005334165
202710: RNCC: 3 | RNVC: 2
202710: RNCC: 5 | RNVC: 9
A1912: RNCC: 5 | RNVC: 9
92118: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-533-3728
Ha E Deflector Assy

005333728
192-61041-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-531-9859
Chute Suppo Bracket

005319859
125C2999: RNCC: 3 | RNVC: 2

13 Jun 1969

1005-00-528-7684
Handoff Unit Assembly

005287684
176F755: RNCC: 3 | RNVC: 2

1 Sep 1974

1005-00-526-8259
Discharge End Assembly

005268259
1312C14452: RNCC: 3 | RNVC: 2
8438870-1: RNCC: 7 | RNVC: 2

25 Aug 1974

1005-00-526-8256
Feeder End Assy

005268256
1312C14457: RNCC: 3 | RNVC: 2
8438870-2: RNCC: 5 | RNVC: 2
1005005268256: RNCC: 6 | RNVC: 9

25 Aug 1974

1005-00-526-7137
Transfer Unit Assembly

005267137
201F316: RNCC: 3 | RNVC: 2

28 Aug 1974

1005-00-525-7379
Lh Center Guide

005257379
8415455: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-525-7378
Rh Center Guide

005257378
8415454: RNCC: 3 | RNVC: 2
8415454: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-525-7375
Hand Charge Adapter

005257375
8415323: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-525-7369
L Feeder Assy Frame

005257369
8407961: RNCC: 3 | RNVC: 9
8407961: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-525-7362
Ejection Chute

005257362
8407915: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-525-7370
R Feeder Assy Frame

005257370
8407962: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-525-7363
Ejection Chute

005257363
8407916: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-525-7367
Disi Rh Feeder Assy

005257367
8407959: RNCC: 3 | RNVC: 9
8407959: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-525-7364
Link Chut Top Guide

005257364
8407917: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-525-3778
Nose Gun Bracket

005253778
170-61031: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-523-7280
Gun Package Bolt Assemlby

005237280
159-61057: RNCC: 3 | RNVC: 2
159-61057: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-523-0354
Guiding Retainer

005230354
5230354: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-521-6273
Ejection Chute

005216273
223-61232: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-519-6585
Helicopter Armament Subsystem Turret

005196585
189F754: RNCC: 3 | RNVC: 2

16 Aug 1974

1005-00-519-6441
Bellmouth Guide

005196441
204R631: RNCC: 3 | RNVC: 2

16 Aug 1974

1005-00-519-6438
Cam Retainer

005196438
189F799: RNCC: 3 | RNVC: 2

16 Aug 1974

1005-00-516-3556
Roller Support

005163556
105D3356-1: RNCC: 3 | RNVC: 2

11 Aug 1974

1005-00-516-3474
Roller Support

005163474
105D3356-2: RNCC: 3 | RNVC: 2

11 Aug 1974

1005-00-516-3215
Emergency Stow Control

005163215
189F729: RNCC: 3 | RNVC: 2

11 Aug 1974

1005-00-515-3072
Ring

005153072
SP-79: RNCC: 3 | RNVC: 2
5-36: RNCC: 3 | RNVC: 2
5153072: RNCC: 5 | RNVC: 2
5153072: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-514-1075
Plate

005141075
5141075: RNCC: 3 | RNVC: 2
5141075: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-514-0817
Scale

005140817
5140817: RNCC: 3 | RNVC: 2
5140817: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-513-7046
Collar

005137046
BUWEPS SK231729: RNCC: 3 | RNVC: 2
SK231729: RNCC: 3 | RNVC: 2
BUWEPS SK231729: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-513-7053
Coupling

005137053
1538562: RNCC: 3 | RNVC: 2
1538652: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-513-0953
Barrel

005130953
1446441: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-7685
Gun Charg Lock Assy

005127685
11511: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-7683
Handle And Cable Assembly

005127683
10811: RNCC: 3 | RNVC: 2
10811: RNCC: 5 | RNVC: 2
JFB90181: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-512-7684
Gun Charger Release

005127684
11378: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-7672
Ammunition Chute

005127672
223-61029-12: RNCC: 3 | RNVC: 2
223-61029-2: RNCC: 5 | RNVC: 1

1 Jan 1963

1005-00-512-7682
Gun Ch Plunger Assy

005127682
11369: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-0609
Gun Charger Tub Cap

005120609
11520: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-0602
Ejection Chut Guide

005120602
223-61099-3: RNCC: 3 | RNVC: 2
223-61099: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-512-0281
Mounti Bracket Assy

005120281
B11478: RNCC: 3 | RNVC: 9
840230: RNCC: 5 | RNVC: 2
92264: RNCC: 5 | RNVC: 9
840230: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-512-0283
Haust E Check Assy

005120283
800724: RNCC: 3 | RNVC: 2
A19826: RNCC: 5 | RNVC: 9
800724: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-511-9042
Caliber .50 Spotting Gun

005119042
7268115: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-508-4397
Guide Assy

005084397
BUWEPSDWG1538646: RNCC: 3 | RNVC: 2
1538646: RNCC: 3 | RNVC: 2
BUWEPSDWG1538646: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-508-2051
Motor Support

005082051
7269723: RNCC: 3 | RNVC: 2
7269723: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-508-0432
Firing C Blade Assy

005080432
8415403: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-507-6322
Firing Pin A Spring

005076322
CS1269-4: RNCC: 3 | RNVC: 9
8410600: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-507-4626
Ammunition Chute Assembly

005074626
C9862-1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-507-4627
Ammunition Chute Assembly

005074627
C9862-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-505-1383
Gun Diverter Block

005051383
A51B13583-11: RNCC: 3 | RNVC: 2
A51B13583-11: RNCC: 3 | RNVC: 9
A51B13583-11: RNCC: 5 | RNVC: 2
A51B13583-11: RNCC: 5 | RNVC: 9

20 Jul 1974

1005-00-504-3851
Adjusting Slide Assembly

005043851
12000656: RNCC: 3 | RNVC: 2
1005005043851: RNCC: 6 | RNVC: 9

13 Jul 1974

1005-00-504-3839
Coupler Adapter

005043839
8438335: RNCC: 3 | RNVC: 2
1005005043839: RNCC: 6 | RNVC: 9

13 Jul 1974

1005-00-502-5590
Plate

005025590
5025590: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-502-5591
Plunger

005025591
5025591: RNCC: 3 | RNVC: 9
5025591: RNCC: 5 | RNVC: 2
5025591: RNCC: 5 | RNVC: 2
5025591: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-502-5556
Key

005025556
ARMYDWG5025556: RNCC: 3 | RNVC: 2
5025556: RNCC: 3 | RNVC: 2
5025556: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-502-5584
Locking Pin

005025584
BUWEPSDWG5025584: RNCC: 3 | RNVC: 2
5025584: RNCC: 3 | RNVC: 2
5025584: RNCC: 3 | RNVC: 2
BUWEPSDWG5025584: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-502-5551
Cartridge Ejector Block

005025551
5025551: RNCC: 3 | RNVC: 2
5025551: RNCC: 5 | RNVC: 2
5025551: RNCC: 5 | RNVC: 9
5025551: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-502-5550
Block

005025550
5025550: RNCC: 3 | RNVC: 9
5025550: RNCC: 5 | RNVC: 2
5025550: RNCC: 5 | RNVC: 2
5025550: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-502-3538
Ammunition Chute

005023538
0621D14851: RNCC: 3 | RNVC: 2
905D370-8: RNCC: 7 | RNVC: 2

9 Jul 1974

1005-00-501-3421
Guide

005013421
5013421: RNCC: 3 | RNVC: 2
A10548: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-501-3205
Firing Pin Stop

005013205
5013205: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-500-9373
Extractor Cam

005009373
5009373: RNCC: 3 | RNVC: 2
201010613: RNCC: 5 | RNVC: 2
5009373: RNCC: 5 | RNVC: 2
5009373: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-499-4392
Connector-Lead Wire

004994392
16975: RNCC: 3 | RNVC: 9

23 Jun 1971

1005-00-499-4387
Booster Yoke Assembly

004994387
21310: RNCC: 3 | RNVC: 2
21310: RNCC: 3 | RNVC: 9
21310: RNCC: 5 | RNVC: 9

23 Jun 1971

1005-00-499-4391
Rear Mounting Plate

004994391
16856: RNCC: 3 | RNVC: 9

23 Jun 1971

1005-00-499-4390
Rear End Bell

004994390
16855: RNCC: 3 | RNVC: 9

23 Jun 1971

1005-00-499-4388
Armature Assembly

004994388
34609: RNCC: 3 | RNVC: 9

23 Jun 1971

1005-00-499-4386
Front Mounting Plate

004994386
16854: RNCC: 3 | RNVC: 9

23 Jun 1971

1005-00-498-7979
Gun Support

004987979
12S876-805: RNCC: 3 | RNVC: 2

10 Oct 1969

1005-00-498-5359
Transfer Unit Assy

004985359
175F632: RNCC: 3 | RNVC: 2
125C3453: RNCC: 3 | RNVC: 2

8 Oct 1969

1005-00-498-2752
Drive Retainer

004982752
116C3419: RNCC: 3 | RNVC: 2

6 Oct 1969

1005-00-495-6843
Switching Lever

004956843
2537724: RNCC: 3 | RNVC: 2

3 Feb 1971

1005-00-495-6839
Firesleeve

004956839
2537723 10001: RNCC: 1 | RNVC: 2
AE14765-001: RNCC: 3 | RNVC: 2
2537723: RNCC: 5 | RNVC: 9

3 Feb 1971

1005-00-494-4588
Ammunition Chute

004944588
175F983: RNCC: 3 | RNVC: 2
175F726: RNCC: 5 | RNVC: 9

6 Jun 1969

1005-00-494-4582
Gun Drive Shaft

004944582
101D4344: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-494-4531
Ammo Drum Cover

004944531
65E9855: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-494-4529
Lo Housing Assembly

004944529
11687017: RNCC: 3 | RNVC: 2
65D9898: RNCC: E | RNVC: 8

6 Jun 1969

1005-00-494-4501
Aircraft Gun Mounting Adapter

004944501
T201-1: RNCC: 3 | RNVC: 2
114C2857: RNCC: 7 | RNVC: 2

6 Jun 1969

1005-00-494-4498
Gun Mount Bracket

004944498
135B6579: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-494-1543
Switch Lever

004941543
116C3787: RNCC: 3 | RNVC: 2

2 Oct 1970

1005-00-493-7441
Speed Indicator Detent Ring

004937441
8437348: RNCC: 3 | RNVC: 2
1005004937441: RNCC: 6 | RNVC: 9

16 Feb 1970

1005-00-491-5466
F Sprocket Assembly

004915466
11838517: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-491-5443
Installation Kit

004915443
2537792: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-490-4812
Cartridge Ejector

004904812
25431: RNCC: 3 | RNVC: 2
F414700: RNCC: 3 | RNVC: 2
F99539: RNCC: 3 | RNVC: 9
F99539: RNCC: 5 | RNVC: 1
F99539: RNCC: 5 | RNVC: 2
REMI-F99539: RNCC: 5 | RNVC: 2
24531: RNCC: 5 | RNVC: 9

22 Sep 1969

1005-00-489-7521
Drive Motor Housing

004897521
16101: RNCC: 3 | RNVC: 9
16101: RNCC: 5 | RNVC: 9
D16101: RNCC: D | RNVC: 9

14 Mar 1972

1005-00-488-8600
Ammunition Chute

004888600
0610C14610-2: RNCC: 3 | RNVC: 2

17 Mar 1972

1005-00-488-8593
Ammunition Chute

004888593
0610C14610-1: RNCC: 3 | RNVC: 2

17 Mar 1972

1005-00-488-5282
Gu Bracket Assembly

004885282
8438759: RNCC: 3 | RNVC: 2

15 May 1970

1005-00-487-1267
Gun Drive Assembly

004871267
11691583: RNCC: 3 | RNVC: 2

19 Jun 1974

1005-00-487-1183
Gun Extension Rod

004871183
415311: RNCC: 3 | RNVC: 2

19 Jun 1974

1005-00-487-1233
Ammunition Can Clip Assembly

004871233
774838-1: RNCC: 3 | RNVC: 2

19 Jun 1974

1005-00-486-7594
E Rear Fi Post Assy

004867594
7937733: RNCC: 3 | RNVC: 2
10000-2: RNCC: 5 | RNVC: 2
10001: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-486-7288
Booster Assy-50 Cal

004867288
110-2100-1: RNCC: 3 | RNVC: 2
29492-2: RNCC: 5 | RNVC: 2
110-2100-1: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-485-8229
Upper Slider

004858229
A51K10559-11: RNCC: 3 | RNVC: 9
A51K10559-11: RNCC: 5 | RNVC: 9
A51K10559-11: RNCC: C | RNVC: 1

19 Jun 1974

1005-00-484-3680
Seat Support Assembly

004843680
8438651: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-484-3687
Cable Guard Assembly

004843687
8438720: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-484-3684
Cable Guard Assembly

004843684
8438709: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-484-3685
Guard Support

004843685
8438710: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-484-3686
Cable Guard Assembly

004843686
8438719: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-484-3683
Gun Carriage Seat Yoke

004843683
8438684: RNCC: 3 | RNVC: 2

23 May 1969

1005-00-483-8350
Repositioner Assemb

004838350
8437826: RNCC: 3 | RNVC: 2
1005-483-8350: RNCC: 6 | RNVC: 9

19 May 1969

1005-00-483-1160
Dovetail Mount

004831160
8447191: RNCC: 3 | RNVC: 2
1005004831160: RNCC: 6 | RNVC: 9

1 Feb 1971

1005-00-482-8453
Pneumatic Feeder Line Support

004828453
2546071: RNCC: 3 | RNVC: 2
2546071: RNCC: 5 | RNVC: 2
2546071: RNCC: 5 | RNVC: 2

25 Jan 1971

1005-00-482-8454
Pneumatic Gun Support Assembly

004828454
2540758: RNCC: 3 | RNVC: 2
2540758: RNCC: 5 | RNVC: 2
2540758: RNCC: 5 | RNVC: 2

25 Jan 1971

1005-00-482-6066
Oil Tank Screen

004826066
8438828-17: RNCC: 3 | RNVC: 2
8438828: RNCC: 7 | RNVC: 2

22 Jan 1971

1005-00-482-6070
Locking Nut Statoseal

004826070
8438828-29: RNCC: 3 | RNVC: 2
1005004826070: RNCC: 6 | RNVC: 9

22 Jan 1971

1005-00-482-6067
Screen Sleeve

004826067
8438828-23: RNCC: 3 | RNVC: 2
2829152011-23: RNCC: 5 | RNVC: 2
8438828-23: RNCC: 5 | RNVC: 9

22 Jan 1971

1005-00-482-6064
Oil Tank Plug

004826064
5007-41: RNCC: 3 | RNVC: 9
5007-41: RNCC: 5 | RNVC: 9
8438828-14: RNCC: 5 | RNVC: 9

22 Jan 1971

1005-00-481-9736
Turret Fairing Channel

004819736
204R341-65: RNCC: 3 | RNVC: 2
204R341: RNCC: D | RNVC: 9

14 Sep 1970

1005-00-478-4966
Bolt Assy-Lock 50 C

004784966
30F73602-3: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-478-4153
Ejection Chute

004784153
12002548: RNCC: 3 | RNVC: 2

16 Jun 1971

1005-00-477-5798
Valve-Control Piston

004775798
MC12258: RNCC: 3 | RNVC: 2
MC12258: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5774
Valve-Control Piston

004775774
MC12939: RNCC: 3 | RNVC: 2
MC12939: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5750
Muzzle Clamp

004775750
135B6314: RNCC: 3 | RNVC: 2

12 Jun 1974

1005-00-477-5666
Valve-Control Plug

004775666
MC12267: RNCC: 3 | RNVC: 2
MC12267: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5672
Spring Plate

004775672
MC12264: RNCC: 3 | RNVC: 2
MC12264: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5669
Valve-Control Plug

004775669
MC12477: RNCC: 3 | RNVC: 2
MC12477: RNCC: 5 | RNVC: 9
MC12477: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5014
Gun Fore End Stock

004775014
14642: RNCC: 3 | RNVC: 2

12 Sep 1969

1005-00-476-9997
Chute Link

004769997
176F555-2: RNCC: 1 | RNVC: 2
1212B12975: RNCC: 3 | RNVC: 2

11 Jun 1971

1005-00-476-9880
Ammunitioin Box Assembly

004769880
531840-301: RNCC: 3 | RNVC: 9
531840-1: RNCC: E | RNVC: 8

11 Jun 1971

1005-00-475-2526
Housing Shield

004752526
66F12681: RNCC: 3 | RNVC: 2
66F12681: RNCC: 5 | RNVC: 2

12 Jan 1968

1005-00-471-7300
Fairing Forward P

004717300
B301562: RNCC: 3 | RNVC: 2
B299321: RNCC: 5 | RNVC: 2
B301533: RNCC: 5 | RNVC: 9
B299321: RNCC: 5 | RNVC: 9
B301562: RNCC: 5 | RNVC: 9
B318603: RNCC: 5 | RNVC: 9
B301562: RNCC: 5 | RNVC: 9
B301562: RNCC: C | RNVC: 1
B301562: RNCC: C | RNVC: 1
B318603: RNCC: C | RNVC: 1

8 May 1970

1005-00-471-5933
Moun Locking Collar

004715933
11698277: RNCC: 3 | RNVC: 2

11 Jan 1971

1005-00-471-1806
Drive Booster Assy

004711806
101D4838: RNCC: 3 | RNVC: 2

19 Aug 1970

1005-00-469-6649
Universal Joint Cover

004696649
8438341-4: RNCC: 3 | RNVC: 2

28 Jan 1970

1005-00-469-5754
Ammunition Handling Sprocket

004695754
135B5903: RNCC: 3 | RNVC: 2

26 Jan 1970

1005-00-468-8697
Lid Assembly Star

004688697
D295724: RNCC: 3 | RNVC: 9
D295724: RNCC: 5 | RNVC: 2
99-6043006: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8779
Retaining A Strip

004688779
C293378: RNCC: 3 | RNVC: 9
C293378: RNCC: 5 | RNVC: 2
99-6042956: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8735
Spe Sealing Strip

004688735
B287918-2: RNCC: 3 | RNVC: 2
B287918-2: RNCC: 3 | RNVC: 9
B287918-2: RNCC: 5 | RNVC: 9
99-6043026: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8741
Starboard Shaft

004688741
F289681: RNCC: 3 | RNVC: 9
F289681: RNCC: 5 | RNVC: 2
99-6043024: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8728
Pod Fairing Door

004688728
B287918: RNCC: 3 | RNVC: 9
B287918: RNCC: 5 | RNVC: 2
99-6043025: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8727
Front Sta Fairing

004688727
E286365-8: RNCC: 3 | RNVC: 9
99-6043016: RNCC: 6 | RNVC: 9
E286365-8: RNCC: C | RNVC: 1

8 May 1970

1005-00-468-8662
Bracket Plug Instrument

004688662
B296623: RNCC: 3 | RNVC: 9
A288057: RNCC: 5 | RNVC: 2
A288057: RNCC: 5 | RNVC: 9
B296623: RNCC: C | RNVC: 1

8 May 1970

1005-00-468-8726
Fairing Front Port

004688726
E286364-8: RNCC: 3 | RNVC: 9
99-6043015: RNCC: 6 | RNVC: 9
E286364-8: RNCC: C | RNVC: 1

8 May 1970

1005-00-468-8645
Bar Locking

004688645
F187873: RNCC: 3 | RNVC: 9
F187873: RNCC: 5 | RNVC: 2

8 May 1970

1005-00-468-8631
Diaphragm Armamen

004688631
B286301: RNCC: 3 | RNVC: 9
B286301: RNCC: 5 | RNVC: 2
99-6042944: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8628
Diaphragm Armamen

004688628
B286302: RNCC: 3 | RNVC: 9
B286302: RNCC: 5 | RNVC: 2
99-6042945: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8479
Rod Assy Tie

004688479
A284771: RNCC: 3 | RNVC: 9
A284771: RNCC: 5 | RNVC: 2
99-6042925: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8477
Plate Reinforcing

004688477
B286289-2: RNCC: 3 | RNVC: 9
B286289-2: RNCC: 5 | RNVC: 2
99-6043876: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8438
Strip Sealing

004688438
B289170: RNCC: 3 | RNVC: 9
B289170: RNCC: 5 | RNVC: 2
99-6042939: RNCC: 6 | RNVC: 9
B289170: RNCC: C | RNVC: 1

8 May 1970

1005-00-468-8394
Ammunition Chute

004688394
D291829: RNCC: 3 | RNVC: 9
D291829: RNCC: 5 | RNVC: 2
99-6042980: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8392
Strip Special

004688392
F293313: RNCC: 3 | RNVC: 9
F29313: RNCC: 5 | RNVC: 2
261A6042951: RNCC: 5 | RNVC: 9
F29313: RNCC: 5 | RNVC: 9
99-6042951: RNCC: 6 | RNVC: 9
F293313: RNCC: C | RNVC: 1
261A6042951: RNCC: C | RNVC: 1

8 May 1970

1005-00-468-8380
Tube Mounting

004688380
B286299: RNCC: 3 | RNVC: 9
B286299: RNCC: 5 | RNVC: 2
99-6042942: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8396
Ammunition Chute

004688396
D292222: RNCC: 3 | RNVC: 9
D292222: RNCC: 5 | RNVC: 2
99-6042977: RNCC: 6 | RNVC: 9

8 May 1970

1005-00-468-8379
Lever Armament Po

004688379
F187868: RNCC: 3 | RNVC: 9
F187868: RNCC: 5 | RNVC: 2

8 May 1970

1005-00-468-1138
Lower-Gun Gas Diverter Seal Ring

004681138
A51K10591-11: RNCC: 3 | RNVC: 2
A51K10591-11: RNCC: 3 | RNVC: 9
A51K10591-11: RNCC: 5 | RNVC: 9
A51K10614-1: RNCC: C | RNVC: 1

7 Jun 1974

1005-00-468-1137
Upper Gun Ring Assembly

004681137
A51K10590-1: RNCC: 3 | RNVC: 2
A51K10590-1: RNCC: 3 | RNVC: 9
A51K10590-1: RNCC: 5 | RNVC: 9

7 Jun 1974

1005-00-468-1141
Gas Diverter Duct

004681141
A51K10554-11: RNCC: 3 | RNVC: 2
A51K10554-11: RNCC: 3 | RNVC: 9
A51K10554-11: RNCC: 5 | RNVC: 9

7 Jun 1974

1005-00-468-1133
Upper Gun Ring Assembly

004681133
A51K10564-1: RNCC: 3 | RNVC: 2
A51K10564-1: RNCC: 3 | RNVC: 9
A51K10564-1: RNCC: 5 | RNVC: 9

7 Jun 1974

1005-00-468-0910
Adjustment Gun Gas Diverter Sleeve

004680910
A51K10557-11: RNCC: 3 | RNVC: 2
A51K10557-11: RNCC: 3 | RNVC: 9
A51K10557-11: RNCC: 5 | RNVC: 9

7 Jun 1974

1005-00-468-0907
Lower Diverter Ring

004680907
A51K10565-1: RNCC: 3 | RNVC: 2
A51K10565-1: RNCC: 3 | RNVC: 9
A51K10565-1: RNCC: 5 | RNVC: 9
A51K10565-11: RNCC: C | RNVC: 1

7 Jun 1974

1005-00-468-0385
Gun Firing Connector Pin

004680385
8436646: RNCC: 3 | RNVC: 2

3 Mar 1972

1005-00-464-1279
Extractor Rod

004641279
054540001: RNCC: 3 | RNVC: 2
5454: RNCC: 5 | RNVC: 9

12 May 1969

1005-00-463-7151
Gun Mount Stop

004637151
65751-03076-106: RNCC: 3 | RNVC: 2

10 Sep 1969

1005-00-463-7153
Gun Mou Pintle Assy

004637153
65751-03004-102: RNCC: 3 | RNVC: 2

10 Sep 1969

1005-00-463-7121
Gun Mount Tube

004637121
S6175-63061-6: RNCC: 3 | RNVC: 2
S6175-63061-8: RNCC: E | RNVC: 8

10 Sep 1969

1005-00-463-4616
Machine Gun Barrel

004634616
8448439: RNCC: 3 | RNVC: 2
1005004634616: RNCC: 6 | RNVC: 9

10 Sep 1969

1005-00-462-6519
Hardware Kit

004626519
7489975P1: RNCC: 3 | RNVC: 9
65B10798: RNCC: 7 | RNVC: 2

7 May 1969

1005-00-462-6511
Control Panel Assy

004626511
66F6231: RNCC: 3 | RNVC: 2

7 May 1969

1005-00-462-6521
Chute Cover

004626521
125C2867: RNCC: 3 | RNVC: 2

7 May 1969

1005-00-462-6485
Exit Cover Assembly

004626485
905D560: RNCC: 3 | RNVC: 2

7 May 1969

1005-00-461-5007
Upper Support Ring

004615007
S6175-64002-001: RNCC: 3 | RNVC: 2

2 May 1969

1005-00-460-5376
Automatic Gun Stop

004605376
12002429: RNCC: 3 | RNVC: 2

7 Jan 1970

1005-00-460-5368
Gun Mount Yoke

004605368
12002421: RNCC: 3 | RNVC: 2

7 Jan 1970

1005-00-460-5305
Gun Mou Saddle Assy

004605305
67C4592: RNCC: 3 | RNVC: 2

7 Jan 1970

1005-00-460-5300
Gun Grip Assy

004605300
701-1101: RNCC: 3 | RNVC: 2
12002438: RNCC: 5 | RNVC: 9

7 Jan 1970

1005-00-457-9330
Elevating Mechanism Bearing Retainer

004579330
10930829: RNCC: 3 | RNVC: 2

30 Apr 1969

1005-00-457-5075
Bag And Frame Assy

004575075
65751-03011-041: RNCC: 3 | RNVC: 2

8 Sep 1969

1005-00-457-5083
Armament Syst Strap

004575083
65751-03020-110: RNCC: 3 | RNVC: 2

8 Sep 1969

1005-00-457-4978
Ammunition Dr Angle

004574978
175F670-6: RNCC: 3 | RNVC: 2

8 Sep 1969

1005-00-457-0535
Gun Fore End Stop

004570535
144US2335: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0534
Small Arms Sling Swivel

004570534
144US2344: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0529
Cartridge Ejector

004570529
144US1192: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0525
Cartridge Magazine

004570525
196030: RNCC: 3 | RNVC: 2
T-293: RNCC: 5 | RNVC: 9
144US632: RNCC: 5 | RNVC: 9
TK-980: RNCC: 5 | RNVC: 9

28 Apr 1969

1005-00-457-0523
Firing Pin

004570523
144US576: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0522
Breech Bolt

004570522
144US575: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0526
Breech Bolt

004570526
144US643: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0520
Trigger

004570520
144US571: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0513
Cartridge Extractor

004570513
144US421: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0511
Trigger Guard

004570511
144US145: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0499
Small Arms Safety

004570499
144US136: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-457-0496
Mainspring Cap

004570496
144US133: RNCC: 3 | RNVC: 2

28 Apr 1969

1005-00-456-6567
Channel Assembly

004566567
531633-1: RNCC: 3 | RNVC: 9

25 Apr 1969

1005-00-455-2302
Latch Assembly

004552302
S6175-64010-007: RNCC: 3 | RNVC: 2

16 Apr 1969

1005-00-455-2291
Latch Assembly

004552291
S6175-64010-006: RNCC: 3 | RNVC: 2

16 Apr 1969

1005-00-453-5830
Housing Assembly

004535830
11838561: RNCC: 3 | RNVC: 2

9 Apr 1969

1005-00-453-5829
Locking Disk

004535829
11838583: RNCC: 3 | RNVC: 2

9 Apr 1969

1005-00-451-6103
Ammunition Box Magazine

004516103
11665208: RNCC: 3 | RNVC: 2
11665208: RNCC: 5 | RNVC: 2

17 May 1971

1005-00-451-6102
Ammunition Chute

004516102
11665204: RNCC: 3 | RNVC: 2
11665204: RNCC: 5 | RNVC: 9

17 May 1971

1005-00-451-4425
Trigger

004514425
10904997: RNCC: 3 | RNVC: 2

14 May 1971

1005-00-450-8498
Control Gun Housing

004508498
MC11834: RNCC: 3 | RNVC: 2
MC11834: RNCC: 5 | RNVC: 9
MC10824: RNCC: E | RNVC: 8
MC10824: RNCC: E | RNVC: 8

17 Dec 1969

1005-00-450-8482
Stock Retainer

004508482
18571: RNCC: 3 | RNVC: 9

17 Dec 1969

1005-00-450-7326
Gun Controlassy

004507326
188F763: RNCC: 3 | RNVC: 2
176F230: RNCC: 5 | RNVC: 2

17 Dec 1969

1005-00-450-7328
Drive End Cover

004507328
905D485: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-7299
Mounting Stop

004507299
J13898-1: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-7294
Cam Retainer Assy

004507294
188F774: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-7292
Resolver Housing

004507292
101D4401: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-7295
Upper Support

004507295
176F213: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-7298
Azimuth Stop Mount

004507298
175F633: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-450-2716
Stock Bearing Plate

004502716
19993: RNCC: 3 | RNVC: 9

10 Dec 1969

1005-00-449-2427
Chuting-50 Caliber

004492427
H250RC: RNCC: 3 | RNVC: 9
H250RC: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-445-9905
Accelerator Housing

004459905
7790978: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-445-5930
Gun Assy Rack

004455930
12S433-5: RNCC: 3 | RNVC: 2
12S433-3: RNCC: 5 | RNVC: 9
12S433-5: RNCC: 5 | RNVC: 9

23 Dec 1970

1005-00-445-4616
Connector Bracket

004454616
8437406: RNCC: 3 | RNVC: 2
1005004454616: RNCC: 6 | RNVC: 9

23 Dec 1970

1005-00-444-2981
Housing

004442981
143-2111: RNCC: 3 | RNVC: 9
143-2111: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-444-2979
Housing

004442979
143-2105: RNCC: 3 | RNVC: 9
143-2105: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-444-2985
Clutch Disc Assembly

004442985
143-2128: RNCC: 3 | RNVC: 9
143-2128: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-443-9907
Ram Air Duct Assembly

004439907
11697793: RNCC: 3 | RNVC: 2

7 Apr 1969

1005-00-443-7678
Rounds Counter Asse

004437678
68D6483: RNCC: 1 | RNVC: 2
715500-105: RNCC: 3 | RNVC: 2
68D6483: RNCC: 5 | RNVC: 2
68D6483: RNCC: 5 | RNVC: 2
68D6483: RNCC: 5 | RNVC: 9

4 Apr 1969

1005-00-442-6738
Box Assembly

004426738
215-29023-114: RNCC: 3 | RNVC: 2

28 Mar 1969

1005-00-442-6737
Box Assembly

004426737
215-29023-113: RNCC: 3 | RNVC: 2

28 Mar 1969

1005-00-442-6060
Stud And Sleeve Ass

004426060
16613: RNCC: 3 | RNVC: 9

28 Mar 1969

1005-00-442-4858
Indicator Yoke

004424858
245028-024: RNCC: 3 | RNVC: 2

21 Mar 1995

1005-00-442-4884
Bracket Magnet

004424884
245029-024: RNCC: 3 | RNVC: 2

4 Apr 1995

1005-00-442-4857
Screw Jewel Assy

004424857
24 5819-901: RNCC: 3 | RNVC: 2

21 Mar 1995

1005-00-442-2289
Valve Cover

004422289
11619142: RNCC: 3 | RNVC: 2
11619142: RNCC: 5 | RNVC: 9

26 Mar 1969

1005-00-442-1872
Revolver Sigh Blade

004421872
38-7: RNCC: 3 | RNVC: 9

5 Dec 1969

1005-00-441-7724
Fore-End Assy

004417724
F105938: RNCC: 3 | RNVC: 2
30535: RNCC: 5 | RNVC: 9
30535: RNCC: 5 | RNVC: 9
22570: RNCC: 5 | RNVC: 9

3 Dec 1969

1005-00-441-7711
Mag Spring Retainer

004417711
F91657: RNCC: 3 | RNVC: 2
16949: RNCC: 3 | RNVC: 9
F91657: RNCC: 5 | RNVC: 2
91657: RNCC: 5 | RNVC: 9

3 Dec 1969

1005-00-437-6131
Gun En Adapter Assy

004376131
12S852-801: RNCC: 3 | RNVC: 2

29 Aug 1969

1005-00-437-4760
Cartridge Receiver

004374760
F102571: RNCC: 3 | RNVC: 2
30540: RNCC: 5 | RNVC: 9
102575: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4775
Stock Bearing Plate

004374775
19993: RNCC: 3 | RNVC: 2
F19993: RNCC: 3 | RNVC: 2

29 Aug 1969

1005-00-437-4766
Sear

004374766
18750: RNCC: 3 | RNVC: 2
F18750: RNCC: 5 | RNVC: 1
F18750: RNCC: 5 | RNVC: 2

29 Aug 1969

1005-00-437-4755
Magazine Tube Exten

004374755
F29765: RNCC: 3 | RNVC: 2
29765: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4748
Locking Block Assem

004374748
F97606: RNCC: 3 | RNVC: 2
F200624: RNCC: 5 | RNVC: 1
F200624: RNCC: 5 | RNVC: 2
F22325-870: RNCC: 5 | RNVC: 9
22325: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4745
Small Arms Firing Hammer

004374745
F99415: RNCC: 3 | RNVC: 2
18749: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4735
Pivot Carrier Tube

004374735
F91887: RNCC: 3 | RNVC: 2
17417: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4734
Carrie Dog Follower

004374734
17416: RNCC: 3 | RNVC: 2
F17416: RNCC: 5 | RNVC: 1
F17416: RNCC: 5 | RNVC: 2

29 Aug 1969

1005-00-436-2458
Gas Retainer

004362458
216-29423-1: RNCC: 3 | RNVC: 2

24 Mar 1969

1005-00-436-2459
Gas Retainer

004362459
216-29422-1: RNCC: 3 | RNVC: 2

24 Mar 1969

1005-00-436-0545
Gun Stabilizer Ring

004360545
216-29417-5: RNCC: 3 | RNVC: 2

21 Mar 1969

1005-00-436-0542
Conveyor Element

004360542
1311C6682-5: RNCC: 3 | RNVC: 2

21 Mar 1969

1005-00-435-8090
Valve Stem

004358090
BUWEPSDWG2838217: RNCC: 3 | RNVC: 2
2838217: RNCC: 3 | RNVC: 2
BUWEPSDWG2838217: RNCC: 5 | RNVC: 9

21 Mar 1969

1005-00-434-8394
Rear Link Guide

004348394
7268691: RNCC: 3 | RNVC: 2

7 Aug 1970

1005-00-433-2838
Feed Unit Fixture

004332838
11838602: RNCC: 3 | RNVC: 2

30 Jul 1970

1005-00-433-2839
Gun Assembl Fixture

004332839
11838615: RNCC: 3 | RNVC: 2

30 Jul 1970

1005-00-432-3087
Holdback Cam

004323087
A51K10580-17: RNCC: 3 | RNVC: 2
A51K10580-17: RNCC: 3 | RNVC: 9
A51K10580-17: RNCC: 5 | RNVC: 2
A51K10580-15: RNCC: 5 | RNVC: 9
A51K10580-17: RNCC: 5 | RNVC: 9

8 May 1974

1005-00-432-3102
Holdback Pivot

004323102
A51K10581-11: RNCC: 3 | RNVC: 2
A51K10581-11: RNCC: 3 | RNVC: 9
A51K10581-11: RNCC: 5 | RNVC: 9

8 May 1974

1005-00-432-3078
Holdback Plunger

004323078
A51K10579-11: RNCC: 3 | RNVC: 2
A51K10579-11: RNCC: 3 | RNVC: 9
A51K10579-11: RNCC: 5 | RNVC: 9

8 May 1974

1005-00-431-4119
Gun Pneumatic Plate

004314119
2546646: RNCC: 3 | RNVC: 2

23 Apr 1971

1005-00-423-4295
Lockring Hub Azimut

004234295
8437167-4: RNCC: 3 | RNVC: 2
1005-423-4295: RNCC: 6 | RNVC: 9

1 May 1974

1005-00-423-4353
Ammunition Conveyor Element

004234353
1311C6689: RNCC: 3 | RNVC: 2
8439076-4: RNCC: 7 | RNVC: 2

1 May 1974

1005-00-423-4282
Plate Hub Azimuth

004234282
8437167-8: RNCC: 1 | RNVC: 2
L4-82-312U: RNCC: 3 | RNVC: 2
8437167-8: RNCC: 5 | RNVC: 9
1005-423-4282: RNCC: 6 | RNVC: 9

1 May 1974

1005-00-423-4297
Friction Clutch Hub

004234297
L4-23-312U: RNCC: 3 | RNVC: 2
8437167-2: RNCC: 5 | RNVC: 2

1 May 1974

1005-00-423-4280
Pressure Ring

004234280
8437167-10: RNCC: 1 | RNVC: 2
L4-59-312U: RNCC: 3 | RNVC: 2
8437167-10: RNCC: 5 | RNVC: 9
1005-423-4280: RNCC: 6 | RNVC: 9

1 May 1974

1005-00-423-4292
Plate Back Azimuth

004234292
8437167-6: RNCC: 3 | RNVC: 2

1 May 1974

1005-00-421-8722
Stripping Guide

004218722
7268618: RNCC: 3 | RNVC: 2

11 Dec 1970

1005-00-421-8718
Booster Adapter

004218718
7268562: RNCC: 3 | RNVC: 2

11 Dec 1970

1005-00-420-9115
Sight Ring

004209115
8448019: RNCC: 3 | RNVC: 2

12 Mar 1969

1005-00-420-9114
Rod Detent

004209114
8448017: RNCC: 3 | RNVC: 2

12 Mar 1969

1005-00-420-7811
Rear Sight

004207811
8448009: RNCC: 3 | RNVC: 2

10 Mar 1969

1005-00-420-7810
Front Sight

004207810
8448010: RNCC: 3 | RNVC: 2

10 Mar 1969

1005-00-420-5127
Gun Muzzle Brake

004205127
8447984: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-5128
Retainer Assembly

004205128
8447967-1: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-5129
Latch Lever

004205129
8447899: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-5123
Bag And Frame Assem

004205123
8447988: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-5124
Bag Assembly

004205124
8447973: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-5119
Latch Pivot

004205119
8447902: RNCC: 3 | RNVC: 2

7 Mar 1969

1005-00-420-1062
Knockout Rod

004201062
BUWEPSDWG2518494: RNCC: 3 | RNVC: 2
2518494: RNCC: 3 | RNVC: 2
2518494: RNCC: 3 | RNVC: 2
BUWEPSDWG2518494: RNCC: 5 | RNVC: 9
LD413867: RNCC: C | RNVC: 1

5 Mar 1969

1005-00-420-1060
Side Plate

004201060
SK231748: RNCC: 3 | RNVC: 2

5 Mar 1969

1005-00-419-7057
Ammunition Loader Housing

004197057
176F417: RNCC: 3 | RNVC: 2

2 Dec 1970

1005-00-414-0087
Ammunition Loa Post

004140087
167C2060: RNCC: 3 | RNVC: 2
116C3824: RNCC: 3 | RNVC: 2
135B6124: RNCC: 5 | RNVC: 9

6 Nov 1970

1005-00-413-0976
Armament Rail Assy

004130976
101D4267: RNCC: 3 | RNVC: 2

29 Apr 1970

1005-00-413-0975
Armament Rail Assy

004130975
175F852: RNCC: 3 | RNVC: 2

29 Apr 1970

1005-00-412-4548
Gun Push Rod

004124548
8439170: RNCC: 3 | RNVC: 2
1005004124548: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-412-4545
Gun Carriage Follower Cam

004124545
8439171: RNCC: 3 | RNVC: 2
1005004124545: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-412-2252
Bellmouth Roller

004122252
8439133-2: RNCC: 3 | RNVC: 2
1005004122252: RNCC: 6 | RNVC: 9
8439133: RNCC: D | RNVC: 9

27 Apr 1974

1005-00-411-1783
G Cam Follower Assy

004111783
S6175-63073-4: RNCC: 3 | RNVC: 2

15 Aug 1969

1005-00-410-8318
Gun Mount Leg

004108318
11661034: RNCC: 3 | RNVC: 2

20 Sep 1972

1005-00-410-2182
Canister Flipper

004102182
8439136: RNCC: 3 | RNVC: 2

27 Apr 1974

1005-00-410-2194
Ammunition Chute Cover

004102194
8439116: RNCC: 3 | RNVC: 2
8439116: RNCC: 5 | RNVC: 2
1005-410-2194: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2179
Bellmouth Cannister

004102179
8439129: RNCC: 3 | RNVC: 2
1005004102179: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2161
Equilibrator Cylinder Cap

004102161
12007308: RNCC: 3 | RNVC: 2

27 Apr 1974

1005-00-410-2135
Ammunition Chute Cover

004102135
8439155: RNCC: 3 | RNVC: 2
1005004102135: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2121
Center Conveyor Guide

004102121
8439012: RNCC: 3 | RNVC: 2
1005004102121: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2120
Ammunition Chute Section

004102120
8439076-3: RNCC: 1 | RNVC: 2
1211C14642: RNCC: 3 | RNVC: 2
1005004102120: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2098
Forward Round Guide

004102098
8438989: RNCC: 3 | RNVC: 2
1005004102098: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2079
Lower Element Chute Cover

004102079
8439152: RNCC: 3 | RNVC: 2
1005004102079: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2094
Forward Guide

004102094
8438974: RNCC: 3 | RNVC: 2
1005004102094: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2082
Locator Block

004102082
8439040: RNCC: 3 | RNVC: 2
1005-410-2082: RNCC: 6 | RNVC: 9
1005004102082: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-410-2063
Chute Cover

004102063
8439153: RNCC: 3 | RNVC: 2
1005-410-2063: RNCC: 6 | RNVC: 9
1005004102063: RNCC: 6 | RNVC: 9

27 Apr 1974

1005-00-408-8126
Conve Elbow Section

004088126
1221C13291: RNCC: 3 | RNVC: 2

10 Jul 1970

1005-00-408-8124
Chute Entrance End

004088124
1321C13294: RNCC: 3 | RNVC: 2

10 Jul 1970

1005-00-408-5635
Azimuth Switch Assy

004085635
116C3801: RNCC: 3 | RNVC: 2

10 Jul 1970

1005-00-408-5636
Azimuth Switch Cam

004085636
139C6355: RNCC: 3 | RNVC: 2

10 Jul 1970

1005-00-408-0151
Timer Clear Module

004080151
11691561: RNCC: 3 | RNVC: 2

8 Sep 1972

Load More Results