What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 82 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 82 of 125

1005-01-383-6465
Weapon Guide

013836465
025448-1: RNCC: 3 | RNVC: 2
025448-1: RNCC: 3 | RNVC: 9
025448: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-465-3395
Cartridge Receiver

014653395
9390015: RNCC: 3 | RNVC: 2

2 Jun 1999

1005-01-465-0405
Gun Turret Outer-Stow Assembly Guide Assembly

014650405
7-217221505: RNCC: 3 | RNVC: 2
7-217221505: RNCC: 5 | RNVC: 9

19 May 1999

1005-01-464-9433
Ammunition Bracket Adapter

014649433
7-317237350-1: RNCC: 3 | RNVC: 2

14 May 1999

1005-01-464-6319
Ammunition Handling Subsystem Elbow Assembly

014646319
3392AS362: RNCC: 3 | RNVC: 2

6 May 1999

1005-01-464-6300
Ammunition Chute Assembly

014646300
3392AS372: RNCC: 1 | RNVC: 2
S505058-101: RNCC: 3 | RNVC: 2

6 May 1999

1005-01-464-6298
Ammunition Chute Assembly

014646298
3392AS371: RNCC: 3 | RNVC: 2

6 May 1999

1005-01-381-0239
Ammunition Chute

013810239
7792346-5: RNCC: 3 | RNVC: 2
7792346-5: RNCC: C | RNVC: 1

5 Oct 1993

1005-01-464-2455
Ammunition Chute Assembly

014642455
6650516: RNCC: 3 | RNVC: 2

22 Apr 1999

1005-01-464-1594
Buffer Weight

014641594
62342: RNCC: 3 | RNVC: 2
CF62342: RNCC: 5 | RNVC: 2
8448617: RNCC: 5 | RNVC: 2
CF62342: RNCC: 5 | RNVC: 9
CF62342: RNCC: 5 | RNVC: 9

19 Apr 1999

1005-01-463-9233
Guard Gun Support

014639233
12978834: RNCC: 3 | RNVC: 2
12978834 SHEETS 1 & 2: RNCC: D | RNVC: 9

9 Apr 1999

1005-01-463-5954
Mounting Plate Knob

014635954
1005V0722: RNCC: 3 | RNVC: 2

29 Mar 1999

1005-01-462-8497
Armament System Electrical Control Box

014628497
12975898: RNCC: 1 | RNVC: 2
3227329: RNCC: 3 | RNVC: 2

19 Feb 1999

1005-01-462-1819
Rifle Mount

014621819
LSCP740007: RNCC: 3 | RNVC: 2

25 Jan 1999

1005-01-460-6556
Ammunition Conveyor

014606556
025699-509: RNCC: 3 | RNVC: 9
025699-509: RNCC: 5 | RNVC: 9

12 Nov 1998

1005-01-460-6545
Ammunition Transfer Unit

014606545
025399-501: RNCC: 3 | RNVC: 2
025399-501: RNCC: 5 | RNVC: 9

12 Nov 1998

1005-01-459-9627
Ammunition Drum Assembly

014599627
025198-501: RNCC: 3 | RNVC: 2
025198-501: RNCC: 5 | RNVC: 9

20 Oct 1998

1005-01-459-7242
Armored Vehicle Rotor Assembly

014597242
12976039: RNCC: 3 | RNVC: 2

14 Oct 1998

1005-01-459-4568
Assembly Exit End

014594568
S256049-151: RNCC: 3 | RNVC: 2

2 Oct 1998

1005-01-459-0080
Base End Rotor

014590080
025307-1: RNCC: 3 | RNVC: 2
025307-1: RNCC: 3 | RNVC: 9
025307: RNCC: D | RNVC: 9

17 Sep 1998

1005-01-458-9367
Kit Chain Ldr Repai

014589367
025800-1: RNCC: 3 | RNVC: 9
025800-1: RNCC: C | RNVC: 1
025800: RNCC: D | RNVC: 9

16 Sep 1998

1005-01-458-5347
Armament System Electrical Control Box

014585347
12956548: RNCC: 3 | RNVC: 2

28 Aug 1998

1005-01-458-4360
Baseplate Tow Launch

014584360
12317054-1: RNCC: 3 | RNVC: 2
12317054: RNCC: D | RNVC: 9

3 May 2021

1005-01-458-4348
Retainer Assembly

014584348
3733 062 000: RNCC: 3 | RNVC: 2

26 Aug 1998

1005-01-458-4349
Bearing Lubed

014584349
3733 063 000: RNCC: 3 | RNVC: 2

26 Aug 1998

1005-01-458-4327
Armament System Electrical Control Box

014584327
12956661: RNCC: 3 | RNVC: 2

26 Aug 1998

1005-01-458-0815
Barrel Carrying Handle Assembly

014580815
025590-1: RNCC: 3 | RNVC: 2
025590-1: RNCC: 3 | RNVC: 9
025590: RNCC: D | RNVC: 9

12 Aug 1998

1005-01-458-0803
Cl Senso Mount Assy

014580803
025514-501: RNCC: 3 | RNVC: 2
025514-501: RNCC: 3 | RNVC: 9
025514: RNCC: D | RNVC: 9

12 Aug 1998

1005-01-457-6176
Machine Gun Mount

014576176
12450079: RNCC: 3 | RNVC: 2
12450079: RNCC: 3 | RNVC: 2

29 Jul 1998

1005-01-457-6152
Gun Mount Pedestal Brace

014576152
12450084: RNCC: 3 | RNVC: 2
12450084: RNCC: 3 | RNVC: 2

29 Jul 1998

1005-01-457-6144
Gun Mount Pedestal Brace

014576144
12375555: RNCC: 3 | RNVC: 2
12375555: RNCC: 3 | RNVC: 2

29 Jul 1998

1005-01-457-6138
Gun Mount Pedestal Brace

014576138
12450077-2: RNCC: 3 | RNVC: 2
12450077-2: RNCC: 3 | RNVC: 2
12450077: RNCC: D | RNVC: 9

29 Jul 1998

1005-01-457-6135
Gun Mount Pedestal Brace

014576135
12450077-1: RNCC: 3 | RNVC: 2
12450077-1: RNCC: 3 | RNVC: 2
12450077: RNCC: D | RNVC: 9

29 Jul 1998

1005-01-457-5812
Gun Mount Pedestal

014575812
12450078: RNCC: 3 | RNVC: 2
12450078: RNCC: 3 | RNVC: 2

28 Jul 1998

1005-01-457-4016
Weapon Gun Modification Kit

014574016
53011600: RNCC: 3 | RNVC: 2

22 Jul 1998

1005-01-457-1039
Ammunition Box Magazine

014571039
12976627: RNCC: 3 | RNVC: 2
12976627: RNCC: 5 | RNVC: 9

10 Jul 1998

1005-01-352-4575
Machine Gun Housing

013524575
12599990: RNCC: 3 | RNVC: 2

27 Jan 1992

1005-01-455-7745
Bearing Shield

014557745
502503-03: RNCC: 3 | RNVC: 2
502503-03: RNCC: 5 | RNVC: 2
502503-03: RNCC: 5 | RNVC: 9

14 May 1998

1005-01-455-4500
20 Millimeter Automatic Gun

014554500
10052599: RNCC: 3 | RNVC: 2
10052600: RNCC: 5 | RNVC: 2

4 May 1998

1005-01-455-4196
Armament System Electrical Control Box

014554196
12900569-1: RNCC: 3 | RNVC: 2

1 May 1998

1005-01-349-6749
Special Strap

013496749
7161091: RNCC: 3 | RNVC: 2
7161091: RNCC: 5 | RNVC: 9

2 Dec 1991

1005-01-454-9496
Cannon Wiper Ring

014549496
G416044: RNCC: 3 | RNVC: 2

17 Apr 1998

1005-01-454-8490
Armored Vehicle Rotor Assembly

014548490
12982390: RNCC: 3 | RNVC: 2

15 Apr 1998

1005-01-454-0010
7.62 Millimeter Machine Gun

014540010
9434359-10: RNCC: 3 | RNVC: 2

16 Mar 1998

1005-01-453-5382
Electronic Control Box Assembly

014535382
12375306: RNCC: 3 | RNVC: 2

3 Mar 1998

1005-01-452-4335
Inside Angle

014524335
1-1102-28-LH: RNCC: 3 | RNVC: 2
5-3020 01: RNCC: D | RNVC: 9

27 Jan 1998

1005-01-452-4329
Outside Angle

014524329
1-1102-48-LH: RNCC: 3 | RNVC: 2
5-3020 01: RNCC: D | RNVC: 9

27 Jan 1998

1005-01-451-6769
5.56 Millimeter Light Machine Gun

014516769
12556999: RNCC: 3 | RNVC: 2

23 Dec 1997

1005-01-449-5916
Chain La Repair Kit

014495916
025800-501: RNCC: 3 | RNVC: 9
025800-501: RNCC: C | RNVC: 1
025800: RNCC: D | RNVC: 9

7 Oct 1997

1005-01-449-5725
Hatch Latch Handle

014495725
502151-03: RNCC: 3 | RNVC: 2
502151-03: RNCC: 5 | RNVC: 2

6 Oct 1997

1005-01-449-5721
Bearing Right Rotor Journal

014495721
7567329-021: RNCC: 3 | RNVC: 9
7567329-021: RNCC: 5 | RNVC: 2

6 Oct 1997

1005-01-448-8225
Rounds Limiter Adapter

014488225
160D197853-1: RNCC: 3 | RNVC: 2
160D197853-1: RNCC: 5 | RNVC: 9

11 Sep 1997

1005-01-448-5477
Gun Hand Guard

014485477
7232111: RNCC: 3 | RNVC: 2
7232111: RNCC: 5 | RNVC: 2

3 Sep 1997

1005-01-448-5473
Gun Hand Guard

014485473
7232112: RNCC: 3 | RNVC: 2
7232112: RNCC: 5 | RNVC: 2

3 Sep 1997

1005-01-448-5471
Shoulder Gun Stock

014485471
7232113: RNCC: 3 | RNVC: 2
7232113: RNCC: 5 | RNVC: 2

3 Sep 1997

1005-01-448-3049
Ammunition Cartridge Guide

014483049
10029053-1: RNCC: 3 | RNVC: 2

26 Aug 1997

1005-01-448-3047
Ammunition Cartridge Guide

014483047
10029052-1: RNCC: 3 | RNVC: 2

26 Aug 1997

1005-01-448-3045
Ammunition Cartridge Guide

014483045
10029214-1: RNCC: 3 | RNVC: 2

26 Aug 1997

1005-01-448-3042
Ammunition Drum Structure Assembly

014483042
10029094-1: RNCC: 3 | RNVC: 2

26 Aug 1997

1005-01-448-3040
Ammunition Drum Structure Assembly

014483040
10029094: RNCC: 3 | RNVC: 2

26 Aug 1997

1005-01-447-3215
Cover Cable

014473215
502569-02: RNCC: 3 | RNVC: 2
502569: RNCC: D | RNVC: 9

1 Aug 1997

1005-01-446-8365
Ammunition Handling Subsystem Elbow Assembly

014468365
7-517237300-1: RNCC: 3 | RNVC: 2

18 Jul 1997

1005-01-446-2912
Auto Gun Receiver

014462912
12524360: RNCC: 3 | RNVC: 2
465-4364: RNCC: 5 | RNVC: 9
465-4364: RNCC: C | RNVC: 1

27 Jun 1997

1005-01-445-9578
Ammunition Drum Assembly

014459578
10048066: RNCC: 3 | RNVC: 2
68-730128-101: RNCC: 5 | RNVC: 2

18 Jun 1997

1005-01-445-6830
Machine Gun Barrel Case

014456830
7575916-001: RNCC: 3 | RNVC: 2

10 Jun 1997

1005-01-445-3688
Egress Kit

014453688
12977110: RNCC: 3 | RNVC: 2

30 May 1997

1005-01-444-0245
Blank Ammunition Firing Attachment

014440245
1005NR0010: RNCC: 3 | RNVC: 2

25 Apr 1997

1005-01-319-8997
7.62 Millimeter Subcaliber Gun

013198997
F1312-360690: RNCC: 3 | RNVC: 9
401008629: RNCC: 5 | RNVC: 2
F1312-360690: RNCC: 5 | RNVC: 2
F1312-360690: RNCC: 5 | RNVC: 9
401008629: RNCC: 5 | RNVC: 9
10486062: RNCC: 6 | RNVC: 9

16 May 1990

1005-01-442-6765
Foward Yaw Pin

014426765
1907AS238: RNCC: 3 | RNVC: 2
1907AS238: RNCC: 5 | RNVC: 2

20 Mar 1997

1005-01-442-0415
Reta Clamp Assembly

014420415
307307.00: RNCC: 3 | RNVC: 2
307307.00: RNCC: 5 | RNVC: 9

3 Mar 1997

1005-01-442-0166
Flash Suppressor

014420166
12012045: RNCC: 3 | RNVC: 2

28 Feb 1997

1005-01-441-5506
Sight Rifle Lock Ring

014415506
12012047: RNCC: 3 | RNVC: 2

14 Feb 1997

1005-01-441-4150
Turret Rotation Ring Assembly

014414150
7070704: RNCC: 3 | RNVC: 2

11 Feb 1997

1005-01-440-2158
Control Remote Shaft

014402158
9991: RNCC: 3 | RNVC: 2
7575860-001: RNCC: 5 | RNVC: 2
0KZS2-186R7A: RNCC: 5 | RNVC: 2
A-212-8929: RNCC: 5 | RNVC: 9
75755860: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-440-2149
Ammunition Chute Ramp

014402149
S505021-129: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-440-2145
Ammunition Chute Window Assembly

014402145
S505021-127: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-440-2143
Ammunition Chute Assembly

014402143
S508009-153: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-440-2146
Ammunition Chute Door Assembly

014402146
S505021-125: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-440-2142
Ammunition Chute Assembly

014402142
S508009-151: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-439-9689
Protective Shield Assembly

014399689
60092600: RNCC: 3 | RNVC: 9
600926 ITEM 1: RNCC: 5 | RNVC: 9
600926-1: RNCC: 5 | RNVC: 9
PL600802 ITEM 19: RNCC: 5 | RNVC: 9
PL600802-19: RNCC: 5 | RNVC: 9
PL600802 ITEM 1: RNCC: C | RNVC: 1
600926: RNCC: D | RNVC: 9

26 Dec 1996

1005-01-439-9656
Protective Shield Assembly

014399656
60092500: RNCC: 3 | RNVC: 9
600925 ITEM 1: RNCC: 5 | RNVC: 9
600925-1: RNCC: 5 | RNVC: 9
PL600802 ITEM 18: RNCC: 5 | RNVC: 9
PL600802-18: RNCC: 5 | RNVC: 9
600925: RNCC: D | RNVC: 9

26 Dec 1996

1005-01-439-8952
30 Millimeter Automatic Gun Mechanical Drive Housing

014398952
3305AS328-1: RNCC: 3 | RNVC: 2
3305AS328-1: RNCC: 5 | RNVC: 2
3305AS328-1: RNCC: 5 | RNVC: 9
3305AS328-1: RNCC: C | RNVC: 1
3305AS328: RNCC: D | RNVC: 9

23 Dec 1996

1005-01-439-8941
30 Millimeter Automatic Gun Mechanical Drive Housing

014398941
3305AS388-1: RNCC: 3 | RNVC: 2
3305AS388-1: RNCC: 5 | RNVC: 2
3305AS388-1: RNCC: 5 | RNVC: 9
3305AS388-1: RNCC: C | RNVC: 1
3305AS388: RNCC: D | RNVC: 9

23 Dec 1996

1005-01-439-8786
Chute Assembly Ramp

014398786
S765062-121: RNCC: 3 | RNVC: 2
S765062: RNCC: D | RNVC: 9

22 Dec 1996

1005-01-439-7494
Feed Chute Chain Link Assembly

014397494
S507012-151: RNCC: 3 | RNVC: 2
S507012: RNCC: D | RNVC: 9

18 Dec 1996

1005-01-439-1681
Ammunition Handling Sprocket

014391681
7-317237440-1: RNCC: 3 | RNVC: 2
7-317237440: RNCC: 5 | RNVC: 9

29 Nov 1996

1005-01-439-1678
Ammunition Chute Assembly

014391678
7-317237400-3: RNCC: 3 | RNVC: 2
7-317237400-1: RNCC: 5 | RNVC: 9
7-317237400: RNCC: 5 | RNVC: 9

29 Nov 1996

1005-01-439-1675
Ammunition Chute Assembly

014391675
7-317237430-1: RNCC: 3 | RNVC: 2
7-317237430: RNCC: 5 | RNVC: 9

29 Nov 1996

1005-01-439-1674
Ammunition Chute Assembly

014391674
7-317237420-1: RNCC: 3 | RNVC: 2
7-317237420: RNCC: 5 | RNVC: 9

29 Nov 1996

1005-01-438-6376
Gun Mounting Adapter

014386376
502499-03: RNCC: 3 | RNVC: 2

14 Nov 1996

1005-01-438-6372
Gun Mount

014386372
502472-03: RNCC: 3 | RNVC: 2

14 Nov 1996

1005-01-438-5214
Gun Charger Handle

014385214
11644153-1: RNCC: 3 | RNVC: 2
11644153-1: RNCC: 5 | RNVC: 9
11644153: RNCC: D | RNVC: 9

10 Nov 1996

1005-01-303-7493
5.56 Millimeter Rifle

013037493
R0715: RNCC: 3 | RNVC: 2
M16A2/MODEL715: RNCC: 3 | RNVC: 2

4 Jul 1989

1005-01-436-9656
Elevation Gun Actuator

014369656
7573980-021: RNCC: 3 | RNVC: 2
7573980: RNCC: D | RNVC: 9

2 Oct 1996

1005-01-436-8890
Bladder Cover

014368890
7566198-002: RNCC: 3 | RNVC: 2
7566198: RNCC: D | RNVC: 9

30 Sep 1996

1005-01-436-8844
Resevoir Housing

014368844
7566197-031: RNCC: 3 | RNVC: 2
7566197: RNCC: D | RNVC: 9

30 Sep 1996

1005-01-436-8410
Ammunition Chute Assembly

014368410
3141AS468-1: RNCC: 3 | RNVC: 2
3141AS468-1: RNCC: 5 | RNVC: 2
3141AS468-1: RNCC: 5 | RNVC: 9
3141AS468-1: RNCC: C | RNVC: 1
3141AS468: RNCC: D | RNVC: 9

27 Sep 1996

1005-01-436-8409
Ammunition Chute Assembly

014368409
3141AS426-1: RNCC: 3 | RNVC: 2
3141AS426-1: RNCC: 5 | RNVC: 2
3141AS426-1: RNCC: 5 | RNVC: 9
3141AS426-1: RNCC: C | RNVC: 1
3141AS426: RNCC: D | RNVC: 9

27 Sep 1996

1005-01-436-8393
Machine Gun Cover Assembly

014368393
7565836-031: RNCC: 3 | RNVC: 2

27 Sep 1996

1005-01-436-8378
Breechblock Handle

014368378
502151-02: RNCC: 3 | RNVC: 9
502151-02: RNCC: 5 | RNVC: 2

27 Sep 1996

1005-01-436-4991
Discharge Door Assembly Link

014364991
502616-05: RNCC: 3 | RNVC: 2
502616: RNCC: D | RNVC: 9

20 Sep 1996

1005-01-436-4988
Gun Armature Assy

014364988
C-90054-002-A: RNCC: 3 | RNVC: 2

20 Sep 1996

1005-01-436-1402
Glacis Plate

014361402
7567328-021: RNCC: 3 | RNVC: 2
7567328: RNCC: D | RNVC: 9

12 Sep 1996

1005-01-436-1381
Weapon Hatch Cover Assembly

014361381
7575836-011: RNCC: 3 | RNVC: 2
7575836: RNCC: D | RNVC: 9

12 Sep 1996

1005-01-436-1384
Exit Assembly End Fitting

014361384
S256026-151: RNCC: 3 | RNVC: 2
S256026: RNCC: D | RNVC: 9

12 Sep 1996

1005-01-436-1388
Exit Assembly End Fitting

014361388
S256025-151: RNCC: 3 | RNVC: 2
S256025: RNCC: D | RNVC: 9

12 Sep 1996

1005-01-436-1373
Reservoir Manifold

014361373
7566560-021: RNCC: 3 | RNVC: 2
7566560: RNCC: D | RNVC: 9

12 Sep 1996

1005-01-436-0738
Mount Pintle

014360738
7576655-021: RNCC: 3 | RNVC: 2
7575644 FIND NO 88: RNCC: 5 | RNVC: 9
7575644: RNCC: D | RNVC: 9

11 Sep 1996

1005-01-436-0151
Automatic Gun Rotor

014360151
502073-02: RNCC: 3 | RNVC: 2
502073: RNCC: D | RNVC: 9

9 Sep 1996

1005-01-435-6336
Commanders Handstation Assembly

014356336
12900572: RNCC: 3 | RNVC: 2

29 Aug 1996

1005-01-435-5018
Barrel Extension

014355018
3392AS114: RNCC: 3 | RNVC: 2

26 Aug 1996

1005-01-435-5015
Pintle Mount Bracket

014355015
3392AS112: RNCC: 3 | RNVC: 2
3392AS112: RNCC: 5 | RNVC: 2

26 Aug 1996

1005-01-435-4651
Mount Pintle

014354651
3392AS111: RNCC: 3 | RNVC: 2

24 Aug 1996

1005-01-435-1954
Receiver Screw Assembly

014351954
8836943-10: RNCC: 3 | RNVC: 2
8836943: RNCC: D | RNVC: 9

16 Aug 1996

1005-01-435-1640
Small Arms Safety

014351640
8836955-10: RNCC: 3 | RNVC: 2
8836955: RNCC: D | RNVC: 9

15 Aug 1996

1005-01-295-1832
Riot Type 12 Gage Shotgun

012951832
50476: RNCC: 3 | RNVC: 2
50518: RNCC: 5 | RNVC: 9

1 Mar 1989

1005-01-294-6955
Extension Set

012946955
6166791: RNCC: 3 | RNVC: 2
6166791: RNCC: 5 | RNVC: 2

22 Feb 1989

1005-01-433-7107
Machine Gun Mount

014337107
3791370-1: RNCC: 3 | RNVC: 2

10 Jul 1996

1005-01-433-6822
Sub Ca Training Kit

014336822
1005V0727: RNCC: 3 | RNVC: 2

9 Jul 1996

1005-01-433-1617
Machine Gun Tripod Mount

014331617
12976948: RNCC: 3 | RNVC: 2

21 Jun 1996

1005-01-432-8959
Sight Aperture

014328959
11509772: RNCC: 3 | RNVC: 2

17 Jun 1996

1005-01-432-5125
Thrust Fixture

014325125
3791365-1: RNCC: 3 | RNVC: 2

7 Jun 1996

1005-01-432-4812
Aircraft Gun Drive Unit

014324812
MC18163: RNCC: 3 | RNVC: 2
MC18163: RNCC: 5 | RNVC: 9

6 Jun 1996

1005-01-431-3358
Rotating Knife

014313358
92007A0383: RNCC: 3 | RNVC: 2
92007A0383: RNCC: 5 | RNVC: 9

10 May 1996

1005-01-431-3353
Filter Hub

014313353
3002847-1: RNCC: 3 | RNVC: 2

10 May 1996

1005-01-430-5366
Receiver Lock Pin

014305366
502307-01: RNCC: 3 | RNVC: 9
502307-01: RNCC: 5 | RNVC: 2

1 May 1996

1005-01-430-4988
Mount Pintle

014304988
7575778-001: RNCC: 3 | RNVC: 2

30 Apr 1996

1005-01-430-4786
Magazine Adapter Kit

014304786
BMN000: RNCC: 3 | RNVC: 2

30 Apr 1996

1005-01-429-6028
Magazine Spacer Round

014296028
HBL1BB: RNCC: 3 | RNVC: 2

15 Apr 1996

1005-01-429-3934
Magazine Adapter

014293934
BMN030: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3933
Magazine Spacer Round

014293933
HXX8BB: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3921
Magazine Spacer Round

014293921
HXX1BB: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3931
Magazine Spacer Round

014293931
GXXB08: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3925
Feed Clip Kit

014293925
FMN1BB: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3915
Rifle Accessories Pouch

014293915
PMNS12: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3905
Rifle Accessories Pouch

014293905
PMNS11: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3897
Feed Clip

014293897
SMN030: RNCC: 3 | RNVC: 9

10 Apr 1996

1005-01-429-3898
Magazine Spacer Round

014293898
TXXB09: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-429-3889
Rifle Accessories Pouch

014293889
PMNS10: RNCC: 3 | RNVC: 2

10 Apr 1996

1005-01-279-8728
Holdback Indicator

012798728
74A732040-2005: RNCC: 3 | RNVC: 2

26 May 1988

1005-01-426-2678
Ammunition Cartridge Guide

014262678
3305AS447-1: RNCC: 3 | RNVC: 2
3305AS447-1: RNCC: 5 | RNVC: 2
3305AS447-1: RNCC: 5 | RNVC: 9
3305AS447-1: RNCC: 5 | RNVC: 9
3305AS447: RNCC: D | RNVC: 9

7 Mar 1996

1005-01-426-0555
Aft Feeder Housing

014260555
12373467: RNCC: 3 | RNVC: 2
12373467: RNCC: 5 | RNVC: 2
12373467: RNCC: 5 | RNVC: 2
12373467: RNCC: 5 | RNVC: 9

4 Mar 1996

1005-01-425-1033
Gunners Handstation

014251033
12900571: RNCC: 3 | RNVC: 2

12 Feb 1996

1005-01-424-9843
Recoil Mechanism Buffer

014249843
67DP-14172-01: RNCC: 3 | RNVC: 2
12373447: RNCC: 5 | RNVC: 2
12373447: RNCC: 5 | RNVC: 2
12373447: RNCC: 5 | RNVC: 9
12373447: RNCC: 7 | RNVC: 2

8 Feb 1996

1005-01-424-9841
Tv Optics Doublet

014249841
3002649-1: RNCC: 3 | RNVC: 2
3002649: RNCC: D | RNVC: 9

8 Feb 1996

1005-01-424-5903
Weapons Systems Brush Holder

014245903
XTB290CLA-1: RNCC: 3 | RNVC: 9
12373834-1: RNCC: 5 | RNVC: 2
12373834-1: RNCC: 5 | RNVC: 2
12373834-1: RNCC: 5 | RNVC: 9
12373834-1: RNCC: C | RNVC: 1

31 Jan 1996

1005-01-424-5378
Weapon Systems Brush Holder

014245378
XTB290CLA-2: RNCC: 3 | RNVC: 9
12373834-2: RNCC: 5 | RNVC: 2
12373834-2: RNCC: 5 | RNVC: 2
12373834-2: RNCC: 5 | RNVC: 9
12373834-2: RNCC: C | RNVC: 1

30 Jan 1996

1005-01-424-4734
Small Arms Cleaning Brush

014244734
SFB110BL-150 OA: RNCC: 3 | RNVC: 9
12373835-1: RNCC: 5 | RNVC: 2
12373835-1: RNCC: 5 | RNVC: 2
12373835-1: RNCC: 5 | RNVC: 9
12373835-1: RNCC: C | RNVC: 1

29 Jan 1996

1005-01-424-4732
Ammunition Cartridge Guide

014244732
12373785: RNCC: 3 | RNVC: 2
12373785: RNCC: 5 | RNVC: 2
12373785: RNCC: 5 | RNVC: 2
12373785: RNCC: 5 | RNVC: 9

29 Jan 1996

1005-01-424-4731
Small Arms Cleaning Brush

014244731
12373810: RNCC: 3 | RNVC: 2
12373810: RNCC: 5 | RNVC: 2
12373810: RNCC: 5 | RNVC: 2
12373810: RNCC: 5 | RNVC: 9

29 Jan 1996

1005-01-271-8802
Ammunition Pallet Drum

012718802
219F296: RNCC: 3 | RNVC: 2

2 Feb 1988

1005-01-423-7637
Ejection Chute

014237637
12373803: RNCC: 3 | RNVC: 2
12373803: RNCC: 5 | RNVC: 2
12373803: RNCC: 5 | RNVC: 9
12373803: RNCC: 5 | RNVC: 9

9 Jan 1996

1005-01-423-4410
Power Assembly Gun

014234410
12373655: RNCC: 3 | RNVC: 2
12373655: RNCC: 5 | RNVC: 2
12373655: RNCC: 5 | RNVC: 2
12373655: RNCC: 5 | RNVC: 9

27 Dec 1995

1005-01-423-2448
Power Box Gun

014232448
12373936: RNCC: 3 | RNVC: 2
12373936: RNCC: 5 | RNVC: 2
12373936: RNCC: 5 | RNVC: 2
12373936: RNCC: 5 | RNVC: 9

19 Dec 1995

1005-01-422-7494
Cartridge Bag Frame Assy

014227494
11699695: RNCC: 3 | RNVC: 2
11699695: RNCC: 5 | RNVC: 9

7 Dec 1995

1005-01-421-9323
Barrel Support

014219323
12373451: RNCC: 3 | RNVC: 2
12373451: RNCC: 5 | RNVC: 2
12373451: RNCC: 5 | RNVC: 2

17 Nov 1995

1005-01-421-8164
Ammunition Cartridge Guide

014218164
12373355: RNCC: 3 | RNVC: 2
12373355: RNCC: 5 | RNVC: 2
12373355: RNCC: 5 | RNVC: 9

15 Nov 1995

1005-01-421-8123
30 Millimeter Automatic Gun Mechanical Drive Housing

014218123
92007A0408: RNCC: 3 | RNVC: 2
92007A0408: RNCC: 5 | RNVC: 2
92007A0408: RNCC: 5 | RNVC: 9

15 Nov 1995

1005-01-421-8121
Machine Gun Housing

014218121
12373368: RNCC: 3 | RNVC: 2
12373368: RNCC: 5 | RNVC: 2
12373368: RNCC: 5 | RNVC: 9

15 Nov 1995

1005-01-421-6789
Machine Gun Cradle

014216789
12373430: RNCC: 3 | RNVC: 2
12373430: RNCC: 5 | RNVC: 2
12373430: RNCC: 5 | RNVC: 2
12373430: RNCC: 5 | RNVC: 9

13 Nov 1995

1005-01-421-2098
Assembly Tray

014212098
7572868-031: RNCC: 3 | RNVC: 9

3 Nov 1995

1005-01-421-0057
Machine Gun Breech Lock Cam

014210057
12374225: RNCC: 3 | RNVC: 2
12374225: RNCC: 5 | RNVC: 2

30 Oct 1995

1005-01-420-5314
Machine Gun Cradle Yoke

014205314
12365282: RNCC: 3 | RNVC: 2
12365282: RNCC: 3 | RNVC: 2
12365282: RNCC: 5 | RNVC: 2

19 Oct 1995

1005-01-418-9347
Gun Stowage Weldment Assembly

014189347
8936119-10: RNCC: 3 | RNVC: 2
8936119: RNCC: D | RNVC: 9

8 Sep 1995

1005-01-418-8872
Elevation Firing Stop

014188872
8936073-01: RNCC: 3 | RNVC: 2

7 Sep 1995

1005-01-418-8873
Ammunition Chute Assembly

014188873
8936081-10: RNCC: 3 | RNVC: 2

7 Sep 1995

1005-01-418-8757
Support Assembly Parachute

014188757
16S188-803: RNCC: 3 | RNVC: 2

7 Sep 1995

1005-01-418-6995
7.62 Millimeter Machine Gun

014186995
12977099: RNCC: 3 | RNVC: 2

2 Sep 1995

1005-01-418-4696
Saddle Assembly

014184696
8936160-10: RNCC: 3 | RNVC: 2
8936160-10: RNCC: 5 | RNVC: 9
8936160-10: RNCC: 5 | RNVC: 9

28 Aug 1995

1005-01-257-5370
Ammunition Chute Support

012575370
142D5656-80: RNCC: 3 | RNVC: 2

20 Jun 1987

1005-01-418-4072
Gun Mounting Adapter

014184072
8936077-10: RNCC: 3 | RNVC: 2

25 Aug 1995

1005-01-253-6522
20 Millimeter Automatic Gun

012536522
8227553: RNCC: 3 | RNVC: 2

23 Apr 1987

1005-01-414-1584
Ammunition Transfer Unit

014141584
7573860-021: RNCC: 3 | RNVC: 2
7573860-021: RNCC: 5 | RNVC: 9

1 Jun 1995

1005-01-412-5766
Automatic Gun Stop

014125766
FN88C1039: RNCC: 3 | RNVC: 2
9030101-01: RNCC: 5 | RNVC: 2
9030101: RNCC: D | RNVC: 9

21 Apr 1995

1005-01-412-5765
Machine Gun Mount

014125765
FN88F1026-1: RNCC: 3 | RNVC: 2

21 Apr 1995

1005-01-412-3129
7.62 Millimeter Machine Gun

014123129
12976814: RNCC: 3 | RNVC: 2
12976814: RNCC: 5 | RNVC: 2
12976814CMR: RNCC: 5 | RNVC: 2
711625000109: RNCC: 6 | RNVC: 9

14 Apr 1995

1005-01-240-2136
Sniper Weapon System

012402136
12011886: RNCC: 3 | RNVC: 2
711111606101: RNCC: 6 | RNVC: 9

10 Sep 1986

1005-01-411-8094
Armament System Electrical Control Box

014118094
12900569: RNCC: 3 | RNVC: 2

31 Mar 1995

1005-01-408-4353
Trigger Housing

014084353
93013A5203: RNCC: 3 | RNVC: 2
93013A5203: RNCC: D | RNVC: 9

16 Feb 1995

1005-01-233-5458
Solenoid Valve Assy

012335458
320447-4: RNCC: 3 | RNVC: 2

1 Jun 1986

1005-01-406-6189
Ammunition Cartridge Guide

014066189
6181435-2: RNCC: 3 | RNVC: 2
6181435-2: RNCC: 5 | RNVC: 2
6181435-2: RNCC: 5 | RNVC: 2
6181435: RNCC: D | RNVC: 9

7 Jan 1995

1005-01-231-0973
5.56 Millimeter Carbine

012310973
9390000: RNCC: 3 | RNVC: 2
9390000: RNCC: 5 | RNVC: 2
711419700301: RNCC: 6 | RNVC: 9

23 Apr 1986

1005-01-406-0330
Gun Operating Rod Assembly

014060330
MC18878: RNCC: 3 | RNVC: 2
MC18878: RNCC: 5 | RNVC: 9

19 Dec 1994

1005-01-224-9769
Ex Checking Fixture

012249769
101D4320M: RNCC: 3 | RNVC: 9

25 Jan 1986

1005-01-398-8859
Pivot Arm Assembly

013988859
KAC11286-40064-1: RNCC: 3 | RNVC: 2

10 Nov 1994

1005-01-398-0015
Electrohydraulic Drive Unit

013980015
7-317221400-7: RNCC: 3 | RNVC: 2
7-317221400-7: RNCC: 5 | RNVC: 9

21 Oct 1994

1005-01-397-5312
Ammunition Chute Assembly

013975312
S505021-109: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

13 Oct 1994

1005-01-397-5311
Ammunition Chute Assembly

013975311
S765062-111: RNCC: 3 | RNVC: 2
S765062: RNCC: D | RNVC: 9

13 Oct 1994

1005-01-396-1395
Ammunition Chute Assembly

013961395
S765062-103: RNCC: 3 | RNVC: 2
S7624R14: RNCC: 5 | RNVC: 2

14 Sep 1994

1005-01-396-1393
Ammunition Chute Assembly

013961393
S765062-101: RNCC: 3 | RNVC: 2
S7624R13: RNCC: 5 | RNVC: 2

14 Sep 1994

1005-01-395-0413
Automatic Gun Stop

013950413
8936074-01: RNCC: 3 | RNVC: 2

19 Aug 1994

1005-01-394-9669
Automatic Gun Feeder

013949669
219F825: RNCC: 3 | RNVC: 2

18 Aug 1994

1005-01-394-4798
Ejection Chute

013944798
S505052-102: RNCC: 3 | RNVC: 2
8936116-50: RNCC: 5 | RNVC: 2

9 Aug 1994

1005-01-394-4799
Ejection Chute

013944799
S505052-101: RNCC: 3 | RNVC: 2
8936116-30: RNCC: 5 | RNVC: 2

9 Aug 1994

1005-01-394-3754
Elevation Firing Stop

013943754
KAC11286-40066-1: RNCC: 3 | RNVC: 2

8 Aug 1994

1005-01-394-1781
Lower Support

013941781
8936092-10: RNCC: 3 | RNVC: 2

3 Aug 1994

1005-01-394-1780
Tube Crossover

013941780
KAC11286-40002-1: RNCC: 3 | RNVC: 2
KAC11286-40002: RNCC: D | RNVC: 9

3 Aug 1994

1005-01-394-1782
Top Support

013941782
8936078-01: RNCC: 3 | RNVC: 2

3 Aug 1994

1005-01-394-0551
Ammunition Chute Assembly

013940551
8936113-10: RNCC: 3 | RNVC: 2
8936113-10: RNCC: 5 | RNVC: 2
8936113: RNCC: D | RNVC: 9

2 Aug 1994

1005-01-394-0495
Base Plate Ramp

013940495
8936071-10: RNCC: 3 | RNVC: 2
8936071-10: RNCC: 5 | RNVC: 2

2 Aug 1994

1005-01-394-0494
Ramp Yoke Assembly

013940494
8936157-10: RNCC: 3 | RNVC: 2
8936157: RNCC: D | RNVC: 9

2 Aug 1994

1005-01-394-0498
Base Plate Ramp

013940498
8936071-20: RNCC: 3 | RNVC: 2
8936071-20: RNCC: 5 | RNVC: 2

2 Aug 1994

1005-01-394-0497
Gun Stowage Support Arm

013940497
8936120-01: RNCC: 3 | RNVC: 2

2 Aug 1994

1005-01-394-0488
Window And Door Yoke Assembly

013940488
8936151-20: RNCC: 3 | RNVC: 2
8936151: RNCC: D | RNVC: 9

2 Aug 1994

1005-01-393-9870
Elevation Firing Stop

013939870
8837033-01: RNCC: 3 | RNVC: 2
0837033: RNCC: D | RNVC: 9

1 Aug 1994

1005-01-393-9871
Ammunition Chute Support

013939871
8936093-10: RNCC: 3 | RNVC: 2
8936093: RNCC: D | RNVC: 9

1 Aug 1994

1005-01-393-7973
Pintle Support

013937973
KAC11286-40012-1: RNCC: 3 | RNVC: 2

27 Jul 1994

1005-01-393-6531
Yoke Assembly

013936531
8936151-10: RNCC: 3 | RNVC: 2

25 Jul 1994

1005-01-393-6532
Armanent Mounting Bracket

013936532
KAC11286-40067-1: RNCC: 3 | RNVC: 2

25 Jul 1994

1005-01-393-6529
Crossover Tube Endplug

013936529
KAC11286-40003-1: RNCC: 3 | RNVC: 2

25 Jul 1994

1005-01-393-6530
Ammunition Mount Assembly

013936530
KAC11286-40033-10: RNCC: 3 | RNVC: 2

25 Jul 1994

1005-01-393-5890
Elevation Firing Stop

013935890
KAC11286-40072-1: RNCC: 3 | RNVC: 2

22 Jul 1994

1005-01-393-5888
Bipod Yoke

013935888
11286-40046-10: RNCC: 3 | RNVC: 2
KAC11286-40046-10: RNCC: 3 | RNVC: 9

22 Jul 1994

1005-01-393-5889
Elevation Firing Stop

013935889
11286-40073-1: RNCC: 3 | RNVC: 2
KAC11286-40073-1: RNCC: 3 | RNVC: 9

22 Jul 1994

1005-01-393-5837
Hopper Cap

013935837
8838144-10: RNCC: 3 | RNVC: 2

22 Jul 1994

1005-01-393-5836
Tube Crossover

013935836
KAC11286-40002-2: RNCC: 3 | RNVC: 2
KAC11286-40002: RNCC: D | RNVC: 9

22 Jul 1994

1005-01-393-5208
Mounting Block

013935208
157D3745: RNCC: 3 | RNVC: 2

21 Jul 1994

1005-01-393-3817
Armament Cover

013933817
10029190: RNCC: 3 | RNVC: 2

19 Jul 1994

1005-01-393-3816
Azimuth Plate Ramp

013933816
KAC11286-40068-10: RNCC: 3 | RNVC: 2

19 Jul 1994

1005-01-393-3818
Insep Tray

013933818
7573724-021: RNCC: 3 | RNVC: 9
7573724: RNCC: D | RNVC: 9

19 Jul 1994

1005-01-393-3819
Elevation Pivot

013933819
7572617-006: RNCC: 3 | RNVC: 9

19 Jul 1994

1005-01-393-2945
Brass Bag Hoop

013932945
KAC11286-40053-10: RNCC: 3 | RNVC: 2
KAC11286-40024-1: RNCC: 5 | RNVC: 9

18 Jul 1994

1005-01-393-2755
Elevation Firing Stop

013932755
8837034-01: RNCC: 3 | RNVC: 2

18 Jul 1994

1005-01-393-2753
20 Millimeter Automatic Gun Elevating Mechanism

013932753
7572617-004: RNCC: 3 | RNVC: 9

18 Jul 1994

1005-01-393-2750
Bipod Yoke

013932750
KAC11286-40013-10: RNCC: 3 | RNVC: 2

18 Jul 1994

1005-01-393-2749
Automatic Gun Stop

013932749
8836990: RNCC: 3 | RNVC: 2

18 Jul 1994

1005-01-393-2729
Rifle Grenade Launcher Sight Mounting Plate

013932729
8936075-10: RNCC: 3 | RNVC: 2
8936075: RNCC: D | RNVC: 9

18 Jul 1994

1005-01-392-6815
Gun Plate

013926815
912C0509-1: RNCC: 3 | RNVC: 2
912C0509: RNCC: D | RNVC: 9

5 Jul 1994

1005-01-392-2456
Breech Bolt

013922456
7004152: RNCC: 3 | RNVC: 2

26 Jun 1994

1005-01-392-2407
Automatic Gun Stop

013922407
8936165-20: RNCC: 3 | RNVC: 2

26 Jun 1994

1005-01-392-0968
Base Plate Ramp

013920968
KAC11286-40034-1: RNCC: 3 | RNVC: 2

23 Jun 1994

1005-01-391-3826
Turnaround Cover

013913826
912G0402-10: RNCC: 3 | RNVC: 2

9 Jun 1994

1005-01-391-1133
Aircraft Gun Drive Unit

013911133
MC15248-2: RNCC: 3 | RNVC: 2
MC15248-02: RNCC: 5 | RNVC: 2
025589-501: RNCC: 5 | RNVC: 9
025589-503: RNCC: 5 | RNVC: 9
MC15248-01: RNCC: 5 | RNVC: 9
MC15248-01: RNCC: 5 | RNVC: 9
025589-503: RNCC: 7 | RNVC: 2

3 Jun 1994

1005-01-390-8366
Ammunition Drum Assembly Partition

013908366
025184-1: RNCC: 3 | RNVC: 2
025184-1: RNCC: 5 | RNVC: 9

27 May 1994

1005-01-390-7864
Ammunition Drum Assembly

013907864
025198-1: RNCC: 3 | RNVC: 2
025198-1: RNCC: 5 | RNVC: 9

26 May 1994

1005-01-390-7866
Ammunition Drum Assembly Partition

013907866
025182-2: RNCC: 3 | RNVC: 2
025182-2: RNCC: 5 | RNVC: 9

26 May 1994

1005-01-390-7446
Ammunition Drum Assembly Partition

013907446
025186-1: RNCC: 3 | RNVC: 2
025186-1: RNCC: 5 | RNVC: 9

25 May 1994

1005-01-390-7433
Ammunition Drum Assembly Partition

013907433
025189-1: RNCC: 3 | RNVC: 2
025189-1: RNCC: 5 | RNVC: 9

25 May 1994

1005-01-390-2499
Ammunition Cartridge Guide

013902499
7-317236225-3: RNCC: 3 | RNVC: 2
7-317236225-3: RNCC: 5 | RNVC: 9

14 May 1994

1005-01-390-2500
Ammunition Cartridge Guide

013902500
7-317236224-3: RNCC: 3 | RNVC: 2
7-317236224-3: RNCC: 5 | RNVC: 9

14 May 1994

1005-01-390-1021
Gun Slide

013901021
912F0207: RNCC: 3 | RNVC: 2

11 May 1994

1005-01-389-5763
Fr Intfc Upper Cov

013895763
912E0414: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-5710
Forward Tube Guide

013895710
912E0510-1: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-5509
Gearbox Cover

013895509
912E0403-1: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-5248
Upper Outer Aft Gde

013895248
912E0412: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-5159
Tube Forward Guide

013895159
912E0509-1: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-4948
Chute Stand

013894948
912D0205-1: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-4893
Upper Wear Plate

013894893
912E0416: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-4662
Intfc Frt Lower Cov

013894662
912E0415: RNCC: 3 | RNVC: 2

25 Apr 1994

1005-01-389-3683
Base Assy

013893683
70750-82110-046: RNCC: 3 | RNVC: 2

22 Apr 1994

1005-01-388-5696
Machine Gun Cradle Yoke

013885696
6650446: RNCC: 3 | RNVC: 2

4 Apr 1994

1005-01-387-9423
Armament System Control Box Assembly

013879423
025899-503: RNCC: 3 | RNVC: 2
025899-503: RNCC: 3 | RNVC: 9

16 Mar 1994

1005-01-387-8904
Armament System Electrical Control Box

013878904
025893-1: RNCC: 3 | RNVC: 2
025893-1: RNCC: 3 | RNVC: 9

15 Mar 1994

1005-01-387-8887
Armament System Electrical Control Box

013878887
025878-1: RNCC: 3 | RNVC: 9
025878-1: RNCC: C | RNVC: 1

15 Mar 1994

1005-01-387-8483
Gun Mounting Adapter

013878483
6650486: RNCC: 3 | RNVC: 2
6650486: RNCC: D | RNVC: 9

14 Mar 1994

1005-01-387-6326
Ammunition Cartridge Guide

013876326
912F0108: RNCC: 3 | RNVC: 2

9 Mar 1994

1005-01-387-5614
Up Outer Wear Plate

013875614
912E0520: RNCC: 3 | RNVC: 2

8 Mar 1994

1005-01-387-4054
Ammunition Box Magazine

013874054
025879-3: RNCC: 3 | RNVC: 2
025879-3: RNCC: 3 | RNVC: 9

4 Mar 1994

1005-01-386-9885
Small Arms Cartridge Guide

013869885
912E0408: RNCC: 3 | RNVC: 2

21 Feb 1994

1005-01-386-9866
Small Arms Cartridge Guide

013869866
912E0409: RNCC: 3 | RNVC: 2

21 Feb 1994

1005-01-386-8549
Stand Chute Forward

013868549
912D0205-3: RNCC: 3 | RNVC: 2

17 Feb 1994

1005-01-386-8370
Magazine Catch

013868370
912C0703: RNCC: 3 | RNVC: 2

16 Feb 1994

1005-01-188-5921
Loader Assy

011885921
217F860: RNCC: 3 | RNVC: 2
AN217F860-1: RNCC: 5 | RNVC: 9

6 Sep 1984

1005-01-386-4441
Magazine Catch

013864441
912F0109: RNCC: 3 | RNVC: 2

4 Feb 1994

1005-01-386-4136
Spent Case Guide

013864136
912F0615-1: RNCC: 3 | RNVC: 2
912F0615: RNCC: D | RNVC: 9

4 Feb 1994

1005-01-386-4112
Spent Case Guide

013864112
912F0615-2: RNCC: 3 | RNVC: 2
912F0615: RNCC: D | RNVC: 9

4 Feb 1994

1005-01-386-4111
Mount Assy Spring

013864111
025503-1: RNCC: 3 | RNVC: 2
025503-1: RNCC: 3 | RNVC: 9
025503: RNCC: D | RNVC: 9

4 Feb 1994

1005-01-386-2769
Cartridge Receiver

013862769
387-3601-3: RNCC: 3 | RNVC: 9
387-3601-3: RNCC: 5 | RNVC: 9
387-3601-3: RNCC: C | RNVC: 1

1 Feb 1994

1005-01-386-2198
Spring Mount

013862198
025507-1: RNCC: 3 | RNVC: 9
025507-1: RNCC: C | RNVC: 1

31 Jan 1994

1005-01-386-1458
Ammunition Cartridge Guide

013861458
912F0305: RNCC: 3 | RNVC: 2

28 Jan 1994

1005-01-385-9471
Base End Stripper Rotor

013859471
025471-1: RNCC: 3 | RNVC: 2
025471-1: RNCC: 3 | RNVC: 9
025471: RNCC: D | RNVC: 9

24 Jan 1994

1005-01-385-7403
Control Unit Piston

013857403
025886-1: RNCC: 3 | RNVC: 2
025886-1: RNCC: 3 | RNVC: 9

18 Jan 1994

1005-01-385-7277
Clamp Mount Assembly

013857277
025514-1: RNCC: 3 | RNVC: 2
025514-1: RNCC: 3 | RNVC: 9

18 Jan 1994

1005-01-385-7224
Pivot Arm Assembly

013857224
025823-1: RNCC: 3 | RNVC: 2
025823-1: RNCC: 3 | RNVC: 9

18 Jan 1994

1005-01-385-6503
Ammunition Cartridge Guide

013856503
912F0302-3: RNCC: 3 | RNVC: 2
912F0302: RNCC: D | RNVC: 9

15 Jan 1994

1005-01-385-6417
Cannon Cradle

013856417
912F0101: RNCC: 3 | RNVC: 2

15 Jan 1994

1005-01-385-5407
Ammunition Conveyor Element

013855407
912G0202: RNCC: 3 | RNVC: 2

14 Jan 1994

1005-01-385-2783
Drive Unit Housing Assembly

013852783
116C3990: RNCC: 3 | RNVC: 2

7 Jan 1994

1005-01-185-6592
Firing Pin

011856592
058-419: RNCC: 3 | RNVC: 9
A-058419: RNCC: 5 | RNVC: 9

1 Aug 1984

1005-01-385-2511
Drive Unit Housing Assembly

013852511
162B7973: RNCC: 3 | RNVC: 2

7 Jan 1994

1005-01-385-1889
Ammunition Conveyor Tensioner

013851889
025619-1: RNCC: 3 | RNVC: 9
025619-1: RNCC: C | RNVC: 1

6 Jan 1994

1005-01-385-1897
Ammunition Loader Assembly

013851897
025499-503: RNCC: 3 | RNVC: 9
025499-503: RNCC: 5 | RNVC: 9

6 Jan 1994

1005-01-385-1873
Ammunition Conveyor Tensioner

013851873
025135-1: RNCC: 3 | RNVC: 2
025135-1: RNCC: 3 | RNVC: 9

6 Jan 1994

1005-01-385-1861
Ammunition Conveyor Tensioner

013851861
025134-1: RNCC: 3 | RNVC: 2
025134-1: RNCC: 3 | RNVC: 9

6 Jan 1994

1005-01-385-1846
Ammunition Conveyor Tensioner

013851846
025133-1: RNCC: 3 | RNVC: 2
025133-1: RNCC: 3 | RNVC: 9

6 Jan 1994

1005-01-385-1716
Sensor Guard

013851716
025518-1: RNCC: 3 | RNVC: 2
025518-1: RNCC: 3 | RNVC: 9

5 Jan 1994

1005-01-385-1485
Ammunition Chute Assembly

013851485
025209-501: RNCC: 3 | RNVC: 2
025209-501: RNCC: 3 | RNVC: 9

5 Jan 1994

1005-01-385-1452
Ammunition Chute Assembly

013851452
025149-1: RNCC: 3 | RNVC: 2
025149-1: RNCC: 3 | RNVC: 9

5 Jan 1994

1005-01-385-1468
Ammunition Chute Assembly

013851468
025639-1: RNCC: 3 | RNVC: 2
025639-1: RNCC: 3 | RNVC: 9

5 Jan 1994

1005-01-385-1298
Ammunition Chute Assembly

013851298
025929-1: RNCC: 3 | RNVC: 9
025929-1: RNCC: C | RNVC: 1

5 Jan 1994

1005-01-385-1219
Drive Assem Housing

013851219
025550-1: RNCC: 3 | RNVC: 2
025550-1: RNCC: 3 | RNVC: 9

4 Jan 1994

1005-01-385-1165
Sensing Rotor Housing

013851165
025541-501: RNCC: 3 | RNVC: 2
025541-501: RNCC: 3 | RNVC: 9

4 Jan 1994

1005-01-385-1170
Totalizer Housing

013851170
025256-1: RNCC: 3 | RNVC: 2
025256-1: RNCC: 3 | RNVC: 9

4 Jan 1994

1005-01-385-0737
Ammunition Chute Support

013850737
025103-1: RNCC: 3 | RNVC: 9
025103-1: RNCC: C | RNVC: 1

3 Jan 1994

1005-01-385-0729
Ejection Chute

013850729
025789-501: RNCC: 3 | RNVC: 2
025789-501: RNCC: 3 | RNVC: 9
025789-1: RNCC: 5 | RNVC: 9

3 Jan 1994

1005-01-384-9797
Ammunition Chute

013849797
5005761002-011: RNCC: 3 | RNVC: 2
025759-501: RNCC: 5 | RNVC: 9
025759-503: RNCC: 5 | RNVC: 9
025759-505: RNCC: 5 | RNVC: 9

30 Dec 1993

1005-01-384-9785
Ammunition Conveyor

013849785
025699-507: RNCC: 3 | RNVC: 9
025699-505: RNCC: 5 | RNVC: 9
025699-507: RNCC: C | RNVC: 1

30 Dec 1993

1005-01-384-7326
End Plate Ring

013847326
025330-1: RNCC: 3 | RNVC: 2
025330-1: RNCC: 3 | RNVC: 9

22 Dec 1993

1005-01-384-6540
Gun Gas Cylinder

013846540
025605-1: RNCC: 3 | RNVC: 9
025605-1: RNCC: C | RNVC: 1

20 Dec 1993

1005-01-384-6476
Machine Gun Ammunition Drum

013846476
025450-1: RNCC: 3 | RNVC: 2
025450-1: RNCC: 3 | RNVC: 9

20 Dec 1993

1005-01-384-1574
Planet Gear Pin

013841574
025316-1: RNCC: 3 | RNVC: 2
025316-1: RNCC: 3 | RNVC: 9
025316: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1573
Guide Assembly Base

013841573
025746-1: RNCC: 3 | RNVC: 2
025746-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1581
Weapon Timing Pin

013841581
025532-1: RNCC: 3 | RNVC: 9
025532-1: RNCC: C | RNVC: 1
025532: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1583
Weapon Gear Cover

013841583
025534-1: RNCC: 3 | RNVC: 9
025534-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1572
Merger Plate

013841572
025314-1: RNCC: 3 | RNVC: 2
025314-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1575
Interface Mag Bracket

013841575
025235-1: RNCC: 3 | RNVC: 2
025235-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1570
Rotor Inboard Hub

013841570
025321-1: RNCC: 3 | RNVC: 2
025321-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1555
Weapon Pawl Actuator

013841555
025938-1: RNCC: 3 | RNVC: 2
025938-1: RNCC: 3 | RNVC: 9
025938: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1530
Weapon Motion Damper Assy

013841530
025230-1: RNCC: 3 | RNVC: 9
025230-1: RNCC: C | RNVC: 1
025230: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1531
Center Outboard Support

013841531
025936-1: RNCC: 3 | RNVC: 9
025936-1: RNCC: C | RNVC: 1
025936: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1532
Weapon Outboard Bracket

013841532
025232-1: RNCC: 3 | RNVC: 9
025232-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1529
Cradle Guide

013841529
025341-1: RNCC: 3 | RNVC: 2
025341-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1528
Manual Drive Bracket

013841528
025500-1: RNCC: 3 | RNVC: 2
025500-1: RNCC: 3 | RNVC: 9
025500: RNCC: 5 | RNVC: 9

9 Dec 1993

1005-01-384-1527
Merger Base Guide

013841527
025354-1: RNCC: 3 | RNVC: 2
025354-1: RNCC: 5 | RNVC: 9

9 Dec 1993

1005-01-384-1520
Bearing Plate Assy

013841520
025224-1: RNCC: 3 | RNVC: 2
025224-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1516
Idler Merger Gear

013841516
025325-1: RNCC: 3 | RNVC: 2
025325-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1514
Base Guide Assembly

013841514
025747-1: RNCC: 3 | RNVC: 2
025747-1: RNCC: 3 | RNVC: 9
025747: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1512
Planet Gear

013841512
025315-1: RNCC: 3 | RNVC: 2
025315-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1492
Bearing

013841492
025349-1: RNCC: 3 | RNVC: 2
025349-1: RNCC: 3 | RNVC: 9
S4962MCZZE5: RNCC: 5 | RNVC: 2
3TKCRZZ49-62U: RNCC: 5 | RNVC: 2

9 Dec 1993

1005-01-384-1497
Timing Rotor

013841497
025335-1: RNCC: 3 | RNVC: 9
025335-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1486
Short Closeout

013841486
025165-1: RNCC: 3 | RNVC: 2
025165-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1489
Forward Guide

013841489
025729-1: RNCC: 3 | RNVC: 2
025729-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1480
Rotor Mouth Guide

013841480
025714-1: RNCC: 3 | RNVC: 2
025714-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1481
Aft Guide Assembly

013841481
025727-1: RNCC: 3 | RNVC: 2
025727-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1476
Inboard Projectile Lever

013841476
025295-1: RNCC: 3 | RNVC: 2
025295-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1479
Merger Nose Guide

013841479
025355-1: RNCC: 3 | RNVC: 2
025355-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1478
Weapon Forklift Channel

013841478
025236-1: RNCC: 3 | RNVC: 2
025236-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1475
Chain Pin

013841475
025792-1: RNCC: 3 | RNVC: 2
025792-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1474
Weapon Detent Assy

013841474
025461-1: RNCC: 3 | RNVC: 2
025461-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1473
Aft Loadtray Rail

013841473
025868-1: RNCC: 3 | RNVC: 2
025868-1: RNCC: 3 | RNVC: 9
025868: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1471
Override Arm

013841471
025743-1: RNCC: 3 | RNVC: 2
025743-1: RNCC: 3 | RNVC: 9
025743: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1465
Loading Gear Shaft

013841465
025427-1: RNCC: 3 | RNVC: 2
025427-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1457
Sensing Rotor

013841457
025542-1: RNCC: 3 | RNVC: 2
025542-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1436
Turn Conveyor Gear

013841436
025323-1: RNCC: 3 | RNVC: 9
025323-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1451
Weapon Handle Bracket

013841451
025537-1: RNCC: 3 | RNVC: 2
025537-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1435
Merger Ring Gear

013841435
025317-1: RNCC: 3 | RNVC: 9
025317-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1447
Weapon Spacer

013841447
025240-1: RNCC: 3 | RNVC: 2
025240-1: RNCC: 3 | RNVC: 9
025240: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1437
Gun Drive Pinion

013841437
025543-1: RNCC: 3 | RNVC: 9
025543-1: RNCC: C | RNVC: 1

9 Dec 1993

1005-01-384-1376
Lower Guide Assy

013841376
025348-2: RNCC: 3 | RNVC: 2
025348-2: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1428
Panel Assy

013841428
025121-501: RNCC: 3 | RNVC: 2
025121-501: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1426
Lower Rt Guide Assy

013841426
025348-1: RNCC: 3 | RNVC: 2
025348-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1421
Handoff Merger Gear

013841421
025322-1: RNCC: 3 | RNVC: 2
025322-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1415
Weapon Timing Pin Housing

013841415
025531-1: RNCC: 3 | RNVC: 2
025531-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1410
Weapon Spacer

013841410
025240-501: RNCC: 3 | RNVC: 2
025240-501: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1402
Exit Tray

013841402
025740-1: RNCC: 3 | RNVC: 2
025740-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1404
Tray Rail

013841404
025486-1: RNCC: 3 | RNVC: 2
025486-1: RNCC: 3 | RNVC: 9
025486: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1396
Hydraulic Drive Unit

013841396
74-730051-203: RNCC: 3 | RNVC: 2

9 Dec 1993

1005-01-384-1388
Spring Stop Button

013841388
CL-10A-SSB: RNCC: 3 | RNVC: 9
025434-1: RNCC: 5 | RNVC: 2
025434-1: RNCC: 5 | RNVC: 9

9 Dec 1993

1005-01-384-1384
Exit Tray Snout Assy

013841384
025748-1: RNCC: 3 | RNVC: 2
025748-1: RNCC: 3 | RNVC: 9
025748: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1392
Weapon Loadtray Assy

013841392
025933-1: RNCC: 3 | RNVC: 2
025933-1: RNCC: 3 | RNVC: 9
025933: RNCC: D | RNVC: 9

9 Dec 1993

1005-01-384-1391
Interface Mag Bracket

013841391
025234-1: RNCC: 3 | RNVC: 2
025234-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1389
Shaft Endcap

013841389
025115-501: RNCC: 3 | RNVC: 2
025115-501: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1382
Weapon Handle Cover

013841382
025464-1: RNCC: 3 | RNVC: 2
025464-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1375
Weapon Track Spacer

013841375
025749-1: RNCC: 3 | RNVC: 2
025749-1: RNCC: 3 | RNVC: 9

9 Dec 1993

1005-01-384-1037
Small Arms Cartridge Guide

013841037
025725-1: RNCC: 3 | RNVC: 2
025725-1: RNCC: 3 | RNVC: 9

8 Dec 1993

1005-01-383-6464
Control Unit Connector Bracket

013836464
025861-1: RNCC: 3 | RNVC: 2
025861-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6463
Lower Rotor Plate

013836463
025343-1: RNCC: 3 | RNVC: 2
025343-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6469
Cannon Conveyor Track

013836469
025706-2: RNCC: 3 | RNVC: 2
025706-2: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6468
Lower Base Guide

013836468
025656-1: RNCC: 3 | RNVC: 2
025656-1: RNCC: 3 | RNVC: 9
025656: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6467
Feed Slide

013836467
025422-1: RNCC: 3 | RNVC: 2
025422-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6459
Splined Shaft

013836459
025473-1: RNCC: 3 | RNVC: 2
025473-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6458
Bearing Spacer

013836458
025411-1: RNCC: 3 | RNVC: 2
025411-1: RNCC: 3 | RNVC: 9
025411: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6457
Weapon Intermediate Transfer Rotor

013836457
025445-1: RNCC: 3 | RNVC: 9
025445-1: RNCC: C | RNVC: 1
025445: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6456
Lower Outer Nose Guide

013836456
025651-1: RNCC: 3 | RNVC: 2
025651-1: RNCC: 3 | RNVC: 9
025651: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6453
Inboard Plate

013836453
025313-1: RNCC: 3 | RNVC: 2
025313-1: RNCC: 3 | RNVC: 9
025313: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6451
Dry Conveyor Gear

013836451
025324-1: RNCC: 3 | RNVC: 2
025324-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6447
Center Chainguide

013836447
025193-504: RNCC: 3 | RNVC: 2
025193-504: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6448
Idler Support Assembly

013836448
025145-1: RNCC: 3 | RNVC: 2
025145-1: RNCC: 3 | RNVC: 9
025145: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6445
Machined Bar

013836445
025784-1: RNCC: 3 | RNVC: 2
025784-1: RNCC: 3 | RNVC: 9
025784: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6443
Link Stripper Rotor

013836443
025424-1: RNCC: 3 | RNVC: 2
025424-1: RNCC: 3 | RNVC: 9
025424: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6442
Shear Panel Closeout

013836442
025211-501: RNCC: 3 | RNVC: 2
025211-501: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6440
Socket Barrel

013836440
025528-1: RNCC: 3 | RNVC: 2
025528-1: RNCC: 3 | RNVC: 9
025528: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6439
Accelerator Drive Shaft

013836439
025300-501: RNCC: 3 | RNVC: 9
025300-501: RNCC: C | RNVC: 1
025300: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6437
Outbd Cradle Assy

013836437
025353-1: RNCC: 3 | RNVC: 9
025353-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6438
External Closeout

013836438
025162-1: RNCC: 3 | RNVC: 2
025162-1: RNCC: 3 | RNVC: 9
025162: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6432
Outboard Forward Fitting Handling

013836432
025229-1: RNCC: 3 | RNVC: 9
025229-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6433
Machined Drum Assembly

013836433
025455-1: RNCC: 3 | RNVC: 9
025455-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6431
Ammunition Cartridge Guide

013836431
025193-505: RNCC: 3 | RNVC: 9
025193-505: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6426
Handoff Spacer

013836426
025408-501: RNCC: 3 | RNVC: 2
025408-501: RNCC: 3 | RNVC: 9
025408: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6428
Timing Hub

013836428
025487-1: RNCC: 3 | RNVC: 2
025487-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6424
Terminal Drive Bearing Plate Assembly

013836424
025124-1: RNCC: 3 | RNVC: 2
025124-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6425
Weapon Altered Rack

013836425
025420-1: RNCC: 3 | RNVC: 9
025420-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6422
Nose End Stripper Rotor

013836422
025470-1: RNCC: 3 | RNVC: 2
025470-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6418
Turnaround Nose Housing Assembly

013836418
025659-1: RNCC: 3 | RNVC: 9
025659-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6419
Rotor Cap Ring

013836419
025332-1: RNCC: 3 | RNVC: 9
025332-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6413
Upper Rotor Plate

013836413
025342-1: RNCC: 3 | RNVC: 9
025342-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6416
Loader Spacer

013836416
025472-511: RNCC: 3 | RNVC: 9
025472-511: RNCC: C | RNVC: 1
025472: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6415
Outboard Plate

013836415
025312-1: RNCC: 3 | RNVC: 2
025312-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6412
Center Inboard Support

013836412
025937-1: RNCC: 3 | RNVC: 9
025937-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6414
External Closeout

013836414
025162-2: RNCC: 3 | RNVC: 9
025162-2: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6409
Handoff Rotor

013836409
025458-1: RNCC: 3 | RNVC: 2
025458-1: RNCC: 3 | RNVC: 9
025458: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6407
Handle Bracket Assembly

013836407
025122-1: RNCC: 3 | RNVC: 9
025122-1: RNCC: C | RNVC: 1
025122: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6408
Base Side Plate Assembly

013836408
0257: RNCC: 3 | RNVC: 2
025717-1: RNCC: 3 | RNVC: 2
025717-1: RNCC: 3 | RNVC: 9
025717: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6386
Machined Handle

013836386
025463-1: RNCC: 3 | RNVC: 2
025463-1: RNCC: 3 | RNVC: 9
025463: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6404
Splined Socket

013836404
025529-1: RNCC: 3 | RNVC: 2
025529-1: RNCC: 3 | RNVC: 9
025529: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6401
Stripper Guide

013836401
025438-501: RNCC: 3 | RNVC: 9
025438-501: RNCC: C | RNVC: 1
025438: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6403
Nose Gear Hub

013836403
025410-1: RNCC: 3 | RNVC: 2
025410-1: RNCC: 3 | RNVC: 9
025410: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6399
Cannon Conveyor Track

013836399
025706-1: RNCC: 3 | RNVC: 9
025706-1: RNCC: C | RNVC: 1
025706: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6396
Tensioner Endturn Assembly

013836396
025139-1: RNCC: 3 | RNVC: 9
025139-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6402
Weapon Bearing Retainer

013836402
025490-1: RNCC: 3 | RNVC: 2
025490-1: RNCC: 3 | RNVC: 9
025490: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6397
Rotor Outboard Hub

013836397
025318-1: RNCC: 3 | RNVC: 2
025318-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6395
Retainer End Cap

013836395
025351-1: RNCC: 3 | RNVC: 2
025351-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6387
Load Tray Guide

013836387
025934-1: RNCC: 3 | RNVC: 2
025934-1: RNCC: 3 | RNVC: 9
025934: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6390
Inboard Merger Cradle

013836390
025352-1: RNCC: 3 | RNVC: 9
025352-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6391
Eccentric Threaded Pin

013836391
025460-1: RNCC: 3 | RNVC: 2
025460-1: RNCC: 3 | RNVC: 9
025460: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6385
Accelerator Drive Shaft

013836385
025300-1: RNCC: 3 | RNVC: 2
025300-1: RNCC: 3 | RNVC: 9
025300: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6376
Handoff Spacer

013836376
025408-1: RNCC: 3 | RNVC: 2
025408-1: RNCC: 3 | RNVC: 9
025408: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6384
Load Gate Switch Assembly

013836384
025854-1: RNCC: 3 | RNVC: 2
025854-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6383
Flanged Closeout Assembly

013836383
025210-2: RNCC: 3 | RNVC: 2
025210-2: RNCC: 3 | RNVC: 9
025210: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6381
Motor Support Bracket Assembly

013836381
025947-1: RNCC: 3 | RNVC: 2
025947-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6382
Turnaround Nose Element Guide

013836382
025650-1: RNCC: 3 | RNVC: 2
025650-1: RNCC: 3 | RNVC: 9
025650: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6377
Loader Spacer

013836377
025472-509: RNCC: 3 | RNVC: 2
025472-509: RNCC: 3 | RNVC: 9
025472: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6375
Internal Closeout

013836375
025161-1: RNCC: 3 | RNVC: 2
025161-1: RNCC: 3 | RNVC: 9
025161: RNCC: 5 | RNVC: 9

26 Nov 1993

1005-01-383-6371
Outboard Trunnion

013836371
025483-1: RNCC: 3 | RNVC: 2
025483-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6373
Merger Rotor Assy

013836373
025340-1: RNCC: 3 | RNVC: 2
025340-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6374
Cannon End Fitting

013836374
025163-1: RNCC: 3 | RNVC: 2
025163-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6378
Turnaround Base Element Guide

013836378
025655-1: RNCC: 3 | RNVC: 2
025655-1: RNCC: 3 | RNVC: 9
025655: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6370
Rotor Cap Assembly

013836370
025302-1: RNCC: 3 | RNVC: 2
025302-1: RNCC: 3 | RNVC: 9
025302: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6369
Inboard Fitting Assembly

013836369
025226-2: RNCC: 3 | RNVC: 2
025226-2: RNCC: 3 | RNVC: 9
025226: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6368
Weapon End Base Transfer Rotor

013836368
025444-1: RNCC: 3 | RNVC: 9
025444-1: RNCC: C | RNVC: 1
025444: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6366
Weapon Guide

013836366
025436-1: RNCC: 3 | RNVC: 2
025436-1: RNCC: 3 | RNVC: 9
025436: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6365
Weapon Top Structure Cover

013836365
025418-1: RNCC: 3 | RNVC: 2
025418-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6352
Turnaround Extractor Groove Assembly Guide

013836352
025658-1: RNCC: 3 | RNVC: 2
025658-1: RNCC: 3 | RNVC: 9
025658: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6354
Outside Angle

013836354
025751-1: RNCC: 3 | RNVC: 2
025751-1: RNCC: 3 | RNVC: 9
025751: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6350
Weapon Guide

013836350
025452-1: RNCC: 3 | RNVC: 2
025452-1: RNCC: 3 | RNVC: 9
025452: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6353
Cannon Endturn Assembly

013836353
025159-501: RNCC: 3 | RNVC: 2
025159-501: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6347
Support Crossbar

013836347
025797-1: RNCC: 3 | RNVC: 2
025797-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6349
Stopper Support

013836349
025848-1: RNCC: 3 | RNVC: 2
025848-1: RNCC: 3 | RNVC: 9
025848: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6344
Shell Extraction System Connector Bracket

013836344
025169-1: RNCC: 3 | RNVC: 2
025169-1: RNCC: 3 | RNVC: 9
025169: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6341
Flexible Shaft Support Link Assembly

013836341
025630-1: RNCC: 3 | RNVC: 9
025630-1: RNCC: C | RNVC: 1
025630: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6330
Link Extension Guide

013836330
025437-2: RNCC: 3 | RNVC: 2
025437-2: RNCC: 3 | RNVC: 9
025437: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6331
Drum Cam

013836331
025320-1: RNCC: 3 | RNVC: 9
025320-1: RNCC: C | RNVC: 1
025320: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6337
Side Assembly Support

013836337
025468-1: RNCC: 3 | RNVC: 9
025468-1: RNCC: C | RNVC: 1
025468: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6324
Round Guide Spacer

013836324
025459-1: RNCC: 3 | RNVC: 9
025459-1: RNCC: C | RNVC: 1
025459: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6319
Gun Handling Set

013836319
20000810056-001: RNCC: 3 | RNVC: 2
20000810056-001: RNCC: 5 | RNVC: 2

26 Nov 1993

1005-01-383-6328
Merger Gear

013836328
025331-1: RNCC: 3 | RNVC: 9
025331-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6336
Link Ammo Guide

013836336
025866-1: RNCC: 3 | RNVC: 2
025866-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6334
Shear Panel Closeout

013836334
025211-1: RNCC: 3 | RNVC: 2
025211-1: RNCC: 3 | RNVC: 9
025211: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6333
Nose End Loading Guide

013836333
025446-1: RNCC: 3 | RNVC: 9
025446-1: RNCC: C | RNVC: 1
025446: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6329
Pivot Housing Assembly

013836329
025610-1: RNCC: 3 | RNVC: 2
025610-1: RNCC: 3 | RNVC: 9
025610: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6325
Loadtray Rail

013836325
025867-1: RNCC: 3 | RNVC: 2
025867-1: RNCC: 3 | RNVC: 9
025867: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6317
Trunnion Handoff

013836317
025488-1: RNCC: 3 | RNVC: 2
025488-1: RNCC: 3 | RNVC: 9
025488: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6316
Outer Nose Guide

013836316
025652-1: RNCC: 3 | RNVC: 2
025652-1: RNCC: 3 | RNVC: 9
025652: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6315
Loader Spacer

013836315
025472-507: RNCC: 3 | RNVC: 2
025472-507: RNCC: 3 | RNVC: 9
025472: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6314
Top Handle Assembly

013836314
025525-1: RNCC: 3 | RNVC: 2
025525-1: RNCC: 3 | RNVC: 9
025525: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6312
Timing Rotor

013836312
025125-501: RNCC: 3 | RNVC: 2
025125-501: RNCC: 3 | RNVC: 9
025125: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6309
Accelerator Gear Set

013836309
025301-1: RNCC: 3 | RNVC: 2
025301-1: RNCC: 3 | RNVC: 9
025301: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6311
Hoist Ring Fitting Assembly

013836311
025225-1: RNCC: 3 | RNVC: 2
025225-1: RNCC: 3 | RNVC: 9
025225: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6304
Inside Angle

013836304
025750-1: RNCC: 3 | RNVC: 9
025750-1: RNCC: C | RNVC: 1
025750: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6306
Nose Guide

013836306
025454-1: RNCC: 3 | RNVC: 2
025454-1: RNCC: 3 | RNVC: 9
025454: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6307
Interface Guide

013836307
025484-1: RNCC: 3 | RNVC: 2
025484-1: RNCC: 3 | RNVC: 9
025484: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6303
Inboard Fitting Assembly

013836303
025226-1: RNCC: 3 | RNVC: 9
025226: RNCC: 5 | RNVC: 9
025226-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6293
Nose Guide

013836293
025328-1: RNCC: 3 | RNVC: 9
025328-1: RNCC: C | RNVC: 1
025328: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6273
Idler Support

013836273
025160-1: RNCC: 3 | RNVC: 9
025160-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6302
Support Collar

013836302
025612-1: RNCC: 3 | RNVC: 2
025612-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6296
Weapon End Nose Transfer Rotor

013836296
025443-1: RNCC: 3 | RNVC: 9
025443-1: RNCC: C | RNVC: 1
025443: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6294
Cam Drum Ring Assy

013836294
025329-1: RNCC: 3 | RNVC: 9
025329-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6295
Link Extension Guide

013836295
025437-1: RNCC: 3 | RNVC: 2
025437-1: RNCC: 3 | RNVC: 9
025437: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6291
Endturn Assembly

013836291
025155-1: RNCC: 3 | RNVC: 9
025155-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6292
Side Support Plate

013836292
025130-1: RNCC: 3 | RNVC: 2
025130-1: RNCC: 3 | RNVC: 9
025130: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6286
Stripper Guide

013836286
025440-501: RNCC: 3 | RNVC: 9
025440-501: RNCC: C | RNVC: 1
025440: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6285
Ammunition Cartridge Guide

013836285
025193-1: RNCC: 3 | RNVC: 2
025193-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6284
Outbd Housing Assy

013836284
025338-1: RNCC: 3 | RNVC: 2
025338-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6281
Handoff Spacer

013836281
025408-503: RNCC: 3 | RNVC: 2
025408-503: RNCC: 3 | RNVC: 9
025408: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6274
Loader Spacer

013836274
025472-1: RNCC: 3 | RNVC: 2
025472-1: RNCC: 3 | RNVC: 9
025472: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6279
Side Plate

013836279
025788-1: RNCC: 3 | RNVC: 2
025788-1: RNCC: 3 | RNVC: 9
025788: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6268
Timing Rotor

013836268
025125-1: RNCC: 3 | RNVC: 2
025125-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6269
Bottom Handle

013836269
025526-1: RNCC: 3 | RNVC: 2
025526-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-6277
Turnaround Element Rotor

013836277
025663-1: RNCC: 3 | RNVC: 9
025663-1: RNCC: C | RNVC: 1
025663: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6270
Guard

013836270
025467-1: RNCC: 3 | RNVC: 9
025467-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6271
Inboard Trunnion

013836271
025491-1: RNCC: 3 | RNVC: 9
025491-1: RNCC: C | RNVC: 1

26 Nov 1993

1005-01-383-6266
Input Merger Gear

013836266
025326-1: RNCC: 3 | RNVC: 2
025326-1: RNCC: 3 | RNVC: 9
025326: RNCC: D | RNVC: 9

26 Nov 1993

1005-01-383-6265
Guide Support Shaft

013836265
025413-1: RNCC: 3 | RNVC: 2
025413-1: RNCC: 3 | RNVC: 9

26 Nov 1993

1005-01-383-5908
Machine Gun Housing

013835908
025548-1: RNCC: 3 | RNVC: 9
025548-1: RNCC: C | RNVC: 1

25 Nov 1993

1005-01-383-5813
Ammunition Feeder Shaft

013835813
025545-1: RNCC: 3 | RNVC: 9
025545-1: RNCC: C | RNVC: 1

25 Nov 1993

1005-01-383-5815
Firing Pin Guide

013835815
025453-1: RNCC: 3 | RNVC: 2
025453-1: RNCC: 5 | RNVC: 9

25 Nov 1993

1005-01-383-5758
Shoulder Gun Stock

013835758
6649825: RNCC: 3 | RNVC: 2

25 Nov 1993

1005-01-383-5731
Gun Firing Mechanism

013835731
025401-1: RNCC: 3 | RNVC: 9
025401-1: RNCC: C | RNVC: 1

25 Nov 1993

1005-01-383-5721
Pintle Lock Handle

013835721
025478-1: RNCC: 3 | RNVC: 2
025478-1: RNCC: 3 | RNVC: 9

25 Nov 1993

1005-01-383-5655
Ammunition Chute Assembly

013835655
025689-505: RNCC: 3 | RNVC: 9
S255100-101: RNCC: 5 | RNVC: 2
025689-501: RNCC: 5 | RNVC: 9
025689-505: RNCC: C | RNVC: 1
025689: RNCC: D | RNVC: 9

25 Nov 1993

1005-01-383-5600
Machine Gun Housing

013835600
025339-1: RNCC: 3 | RNVC: 2
025339-1: RNCC: 3 | RNVC: 9

25 Nov 1993

1005-01-383-5427
Ammunition Feeder Shaft

013835427
025547-1: RNCC: 3 | RNVC: 2
025547-1: RNCC: 3 | RNVC: 9

25 Nov 1993

1005-01-383-5251
Small Arms Cartridge Guide

013835251
025347-1: RNCC: 3 | RNVC: 2
025347-1: RNCC: 3 | RNVC: 9

25 Nov 1993

1005-01-383-5205
Gun Hand Guard

013835205
6649823: RNCC: 3 | RNVC: 2

25 Nov 1993

1005-01-383-5183
Ammunition Cartridge Guide

013835183
025713-1: RNCC: 3 | RNVC: 2
025713-1: RNCC: 3 | RNVC: 9

25 Nov 1993

1005-01-383-5075
Small Arms Cartridge Guide

013835075
025346-1: RNCC: 3 | RNVC: 9
025346-1: RNCC: C | RNVC: 1

25 Nov 1993

1005-01-383-3396
Torsion Spring

013833396
025409-1: RNCC: 3 | RNVC: 9
025409-1: RNCC: C | RNVC: 1

22 Nov 1993

1005-01-382-9149
Hooked Flat Bar

013829149
025406-1: RNCC: 3 | RNVC: 2
025406-1: RNCC: 3 | RNVC: 9

12 Nov 1993

1005-01-382-7115
Dump Door Hinge

013827115
025772-1: RNCC: 3 | RNVC: 2
025772-1: RNCC: 3 | RNVC: 9

8 Nov 1993

1005-01-382-2082
Gun Hand Guard

013822082
6649824: RNCC: 3 | RNVC: 2

29 Oct 1993

1005-01-382-0953
5.56 Millimeter Carbine

013820953
12972700: RNCC: 3 | RNVC: 2
R0977: RNCC: 5 | RNVC: 2
12972700: RNCC: 5 | RNVC: 2
241 13629R0977: RNCC: C | RNVC: 1

28 Oct 1993

1005-01-381-9545
Transition Ring

013819545
025358-1: RNCC: 3 | RNVC: 9
025358-1: RNCC: C | RNVC: 1

26 Oct 1993

1005-01-381-9561
Structure Bottom Cover

013819561
025403-1: RNCC: 3 | RNVC: 2
025403-1: RNCC: 3 | RNVC: 9

26 Oct 1993

1005-01-381-9564
Splined Shaft

013819564
025664-1: RNCC: 3 | RNVC: 2
025664-1: RNCC: 3 | RNVC: 9

26 Oct 1993

1005-01-381-9549
Center Chainguide

013819549
025193-516: RNCC: 3 | RNVC: 2
025193-516: RNCC: 3 | RNVC: 9

26 Oct 1993

1005-01-381-9513
Base End Rotor

013819513
025307-2: RNCC: 3 | RNVC: 9
025307-2: RNCC: C | RNVC: 1

26 Oct 1993

1005-01-381-8647
Small Arms Cartridge Guide

013818647
025675-1: RNCC: 3 | RNVC: 9
025675-1: RNCC: C | RNVC: 1
025675: RNCC: D | RNVC: 9

23 Oct 1993

1005-01-381-5458
Machine Structure Assy

013815458
025497-1: RNCC: 3 | RNVC: 2
025497-1: RNCC: 3 | RNVC: 9

18 Oct 1993

1005-01-381-5441
Loadtray Guide

013815441
025404-13: RNCC: 3 | RNVC: 2
025404-13: RNCC: 3 | RNVC: 9
025404: RNCC: D | RNVC: 9

18 Oct 1993

1005-01-381-5466
Element Turnaround Center Guide

013815466
025653-1: RNCC: 3 | RNVC: 2
025653-1: RNCC: 3 | RNVC: 9
025653: RNCC: D | RNVC: 9

18 Oct 1993

Load More Results