What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 73 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 73 of 125

1005-00-114-5254
Exit Guide

001145254
117D2057: RNCC: 3 | RNVC: 2

20 Dec 1972

1005-00-157-8048
Bar

001578048
299822PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-268-7026
Drum Drive Assembly

002687026
117D2193: RNCC: 3 | RNVC: 2
117D2193: RNCC: 5 | RNVC: 2
117D2193: RNCC: 5 | RNVC: 2

18 Jul 1973

1005-00-402-2456
Doubler Plate

004022456
7269959: RNCC: 3 | RNVC: 9
1005PL0960341: RNCC: 6 | RNVC: 9
7269959: RNCC: C | RNVC: 1

3 Apr 1970

1005-00-453-5828
Rotor Track

004535828
11838552: RNCC: 3 | RNVC: 2

9 Apr 1969

1005-00-477-5686
Spring Retainer

004775686
K306-000711: RNCC: 3 | RNVC: 2
K206-000659: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5692
Hydraulic Drive Rotating Assembly

004775692
K324-000012: RNCC: 3 | RNVC: 2
K324-000012: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5687
Spare Parts Kit

004775687
K200058: RNCC: 3 | RNVC: 2
K200058: RNCC: 5 | RNVC: 9
K206-000660: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-491-5467
Stripper Sprocket Assembly

004915467
11838518: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-498-2748
Roller Support

004982748
135B5990: RNCC: 3 | RNVC: 2

6 Oct 1969

1005-00-500-9392
Headed Straight Pin

005009392
5009392: RNCC: 3 | RNVC: 2
201010615: RNCC: 5 | RNVC: 2
A20161: RNCC: 5 | RNVC: 2
3662000817: RNCC: 5 | RNVC: 2
5315PL0920507: RNCC: 6 | RNVC: 9
1005005009392: RNCC: 6 | RNVC: 9
1015005009392: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-516-3464
Chute Ring Section

005163464
11830873-103: RNCC: 1 | RNVC: 2
1212B16786: RNCC: 3 | RNVC: 2
1212B16044: RNCC: 5 | RNVC: 9
205F192-103: RNCC: 5 | RNVC: 9

11 Aug 1974

1005-00-574-4078
Firing Pin

005744078
114C3092: RNCC: 3 | RNVC: 2

8 Dec 1974

1005-00-603-9285
Cocking Handle Guide

006039285
11010155: RNCC: 3 | RNVC: 2
1005006039285: RNCC: 6 | RNVC: 9
10056039285: RNCC: 6 | RNVC: 9
11010155: RNCC: C | RNVC: 1

1 Jan 1961

1005-00-608-5008
Flash Suppressor

006085008
7269034: RNCC: 3 | RNVC: 2
1005006085008: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-628-9052
Rifle Barrel

006289052
7790190: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-650-7302
Ordnance Weapons Spare Parts Roll

006507302
6507302: RNCC: 3 | RNVC: 2
A20223: RNCC: 5 | RNVC: 2
6507302: RNCC: 5 | RNVC: 9
1005-650-7302: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-650-8210
Small Arms Cleaning Rod

006508210
8766012: RNCC: 3 | RNVC: 2
8766012: RNCC: 5 | RNVC: 2
10104435: RNCC: 6 | RNVC: 9
1005PL0911287: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-690-4067
Shoulder Gun Stock Butt Plate

006904067
7790686: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-711-4526
Rate Selec Retainer

007114526
7793078: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-716-1705
Belt Slide Retainer

007161705
7161705: RNCC: 3 | RNVC: 9
A20267: RNCC: 5 | RNVC: 2
7161705: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-723-4087
Ammunition Chu Link

007234087
S762-1410: RNCC: 3 | RNVC: 2
S762-1410: RNCC: 5 | RNVC: 1
S762-1410: RNCC: 5 | RNVC: 2
1215C5238-1: RNCC: 5 | RNVC: 9

9 Feb 1968

1005-00-726-5864
Trunnion Block Shim

007265864
6008951-12: RNCC: 3 | RNVC: 2
7265864: RNCC: 5 | RNVC: 2
7265864: RNCC: 5 | RNVC: 9
6008951-12: RNCC: 5 | RNVC: 9
6008951: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-726-6134
Spring Locking Barrel

007266134
7266134: RNCC: 3 | RNVC: 2
A10536: RNCC: 5 | RNVC: 2
3662000724: RNCC: 5 | RNVC: 2
3662000724: RNCC: 5 | RNVC: 2
201070002: RNCC: 5 | RNVC: 2
A10182: RNCC: 5 | RNVC: 2
5360PL0955004: RNCC: 6 | RNVC: 9
366-200-0724: RNCC: 6 | RNVC: 9
1005007266134: RNCC: 6 | RNVC: 9
75F4220: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-731-2704
Breech Lock Cam

007312704
7312704: RNCC: 3 | RNVC: 9
A20340: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-731-2723
Manual Contro Lever

007312723
7312723: RNCC: 3 | RNVC: 2
3662090220: RNCC: 5 | RNVC: 1
201030100: RNCC: 5 | RNVC: 2
A20011: RNCC: 5 | RNVC: 2
5340PL0928045: RNCC: 6 | RNVC: 9
1005007312723: RNCC: 6 | RNVC: 9
10057312723: RNCC: 6 | RNVC: 9
75F5040: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-731-3752
Cartridge Extractor

007313752
7313752: RNCC: 3 | RNVC: 2
7313752: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-760-3768
Small Arms Extractor Spring Assembly

007603768
8448755: RNCC: 3 | RNVC: 2

7 Apr 1972

1005-00-754-5291
Muzzle Clamp Assembly

007545291
11010336: RNCC: 3 | RNVC: 2
11010336: RNCC: 5 | RNVC: 2
11010336: RNCC: 5 | RNVC: 2
11010336: RNCC: 5 | RNVC: 9
1005PL0959529: RNCC: 6 | RNVC: 9
1005007545291: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-783-5504
Clearing Sector Cam

007835504
11010219: RNCC: 3 | RNVC: 2
11010219: RNCC: 3 | RNVC: 2
11010219: RNCC: 3 | RNVC: 2
11010219: RNCC: 3 | RNVC: 9
11010219: RNCC: 5 | RNVC: 2
11010219: RNCC: 5 | RNVC: 9
387B471G1: RNCC: 5 | RNVC: 9
387B471G1: RNCC: 5 | RNVC: 9
1005PL0960081: RNCC: 6 | RNVC: 9
11010219: RNCC: C | RNVC: 1

1 Jan 1962

1005-00-840-1823
Tractor E Striker

008401823
8401823: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-944-1965
Gun Stabilizer Assy

009441965
6-86061-4: RNCC: 3 | RNVC: 2
6-86061-4: RNCC: C | RNVC: 1

7 Feb 1966

1005-00-941-9338
Cartridge Deflector

009419338
11589551: RNCC: 3 | RNVC: 2

21 Dec 1965

1005-00-887-3103
Gun Drive Seat

008873103
607391: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-01-003-7155
Ammunition Chute

010037155
201F699: RNCC: 1 | RNVC: 2
0621D17560: RNCC: 3 | RNVC: 2

3 May 1975

1005-01-033-3900
Machine Gun Barrel Adapter

010333900
11826001: RNCC: 3 | RNVC: 2
11826001: RNCC: 5 | RNVC: 2
11826001: RNCC: 5 | RNVC: 2
3602000783: RNCC: 5 | RNVC: 9
1005PL0957244: RNCC: 6 | RNVC: 9
1005010333900: RNCC: 6 | RNVC: 9

5 Jan 1977

1005-01-034-4397
Cluster Gear Support Assembly

010344397
7791045: RNCC: 3 | RNVC: 2

25 Jan 1977

1005-00-570-4068
Gun Tee Pin

005704068
167C1085: RNCC: 3 | RNVC: 2
167C1085: RNCC: 5 | RNVC: 9
167C1085: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-518-9757
Elevating Screw Stop Assembly

005189757
5189757: RNCC: 3 | RNVC: 2
5189757: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-722-3850
Traversing Slide Lock Lever

007223850
7793002: RNCC: 3 | RNVC: 2
7793002: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-726-5455
Alterna Bolt Switch

007265455
7265455: RNCC: 3 | RNVC: 9
A20289: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-941-9334
Compression Helical Spring

009419334
6008902: RNCC: 3 | RNVC: 2
A10498: RNCC: 5 | RNVC: 2
5360PL0947947: RNCC: 6 | RNVC: 9
5360009419334: RNCC: 6 | RNVC: 9
6008902: RNCC: C | RNVC: 1

2 Jan 1966

1005-00-861-4680
Gun Boostera Clutch

008614680
66B12688: RNCC: 3 | RNVC: 2
135B6311: RNCC: 5 | RNVC: 2
66B12688: RNCC: 5 | RNVC: 9

9 Oct 1967

1005-00-869-2641
Control Guide Assy

008692641
MC10875: RNCC: 3 | RNVC: 2
MC10875: RNCC: 5 | RNVC: 9
MC10875: RNCC: 5 | RNVC: 9

23 Oct 1967

NSN 1005-00-992-7299 009927299 GUARD,TRIGGER

1005-00-992-7299
Trigger Guard

009927299
61970: RNCC: 3 | RNVC: 2
CF61970: RNCC: 5 | RNVC: 2
8448587: RNCC: 5 | RNVC: 2
8448587: RNCC: 5 | RNVC: 9
711625003202: RNCC: 6 | RNVC: 9
1005009927299: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-00-999-1871
Shoulder Gun Stock

009991871
5910348: RNCC: 3 | RNVC: 2

10 Jan 1966

1005-01-003-2798
Gun Box End Assembly

010032798
201F698-4: RNCC: 1 | RNVC: 2
1321C17556: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-00-056-5838
Cylinder Cap

000565838
322515: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-222-5027
Gun Mount Retainer Plate

002225027
135B5785: RNCC: 3 | RNVC: 2

9 May 1973

1005-00-279-0007
Seal Assembly Liner

002790007
68A732013-2003: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0566
Forward Transmission Housing

002790566
176F489: RNCC: 3 | RNVC: 2
176F489: RNCC: 5 | RNVC: 2
176F489: RNCC: 5 | RNVC: 2

8 Aug 1973

1005-00-287-6527
Machine Gun Mount

002876527
2624100: RNCC: 3 | RNVC: 2

9 Sep 1973

1005-00-418-8557
Ri Safety Indicator

004188557
8448666: RNCC: 3 | RNVC: 2

23 Nov 1970

1005-00-446-5319
Ammunitio Link Assy

004465319
596122-5: RNCC: 3 | RNVC: 2
1237C3184: RNCC: 3 | RNVC: 2
596122-5: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-477-5689
Port Plate

004775689
K306-000710: RNCC: 3 | RNVC: 2
K306-000710: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-501-3566
Compression Helical Spring

005013566
5013566: RNCC: 3 | RNVC: 2
A10471: RNCC: 5 | RNVC: 2
201010038: RNCC: 5 | RNVC: 2
1005-501-3566: RNCC: 6 | RNVC: 9
5360PL0946971: RNCC: 6 | RNVC: 9
1005005013566: RNCC: 6 | RNVC: 9
5360-00-501-3566: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-513-9994
Elevating Handwheel Click Ring

005139994
5139994: RNCC: 3 | RNVC: 2
5139994: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-514-0211
Manual Control Handle

005140211
5140211: RNCC: 3 | RNVC: 2
A10785: RNCC: 5 | RNVC: 2
717124415204: RNCC: 5 | RNVC: 9
5340PL0928027: RNCC: 6 | RNVC: 9
1005005140211: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-514-0216
Lock-Release Lever

005140216
5140216: RNCC: 3 | RNVC: 2
A10780: RNCC: 5 | RNVC: 2
717124438907: RNCC: 6 | RNVC: 9
5340PL0928028: RNCC: 6 | RNVC: 9
1005005140216: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-565-4085
Diskx Lutch

005654085
7268776: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-570-3845
Gun Mounting Spindle

005703845
105D3511: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3793
Acceleration Drive Assembly

005703793
125C3834: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-608-5020
Machine Gun Bipod Leg

006085020
7269046: RNCC: 3 | RNVC: 2
1005006085020: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5110
Latc Lever Assembly

006085110
7269137: RNCC: 3 | RNVC: 2
1005006085110: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-614-7511
Small Arms Safety

006147511
6147511: RNCC: 3 | RNVC: 2
A10708: RNCC: 5 | RNVC: 2
6147511: RNCC: 5 | RNVC: 9
1005006147511: RNCC: 6 | RNVC: 9
1005-614-7511: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-624-3607
Back Plate Latch Lock Spring

006243607
6243607: RNCC: 3 | RNVC: 2
201060202: RNCC: 5 | RNVC: 2
A10415: RNCC: 5 | RNVC: 2
5360PL0947922: RNCC: 6 | RNVC: 9
1005-624-3607: RNCC: 6 | RNVC: 9
1005006243607: RNCC: 6 | RNVC: 9
5360006243607: RNCC: 6 | RNVC: 9
53606243607: RNCC: 6 | RNVC: 9
75F2023: RNCC: 8 | RNVC: 2
6243607: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-650-7136
Tripod Mount Leg

006507136
6507136: RNCC: 3 | RNVC: 2
A10776: RNCC: 5 | RNVC: 2
717124412507: RNCC: 5 | RNVC: 9
1005PL0903111: RNCC: 6 | RNVC: 9
1005006507136: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-711-6230
Latch Lever Assembly

007116230
7793211: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-731-2692
Drivin Rod Assembly

007312692
7312692: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-732-6284
Actuatimg Pin

007326284
11010221: RNCC: 3 | RNVC: 2
178D188P1: RNCC: 5 | RNVC: 2
178D188P1: RNCC: 5 | RNVC: 9
11010221: RNCC: 5 | RNVC: 9
11010221: RNCC: 5 | RNVC: 9
1005PL0960151: RNCC: 6 | RNVC: 9
11010221: RNCC: C | RNVC: 1

1 Jan 1961

1005-00-754-5272
Actuator Blade

007545272
11010220: RNCC: 3 | RNVC: 9
11010220: RNCC: 5 | RNVC: 2
1005PL0960147: RNCC: 6 | RNVC: 9
11010220: RNCC: C | RNVC: 1

1 Jan 1960

1005-00-791-3377
Lubricant Case

007913377
7790995: RNCC: 3 | RNVC: 9
7790995: RNCC: 5 | RNVC: 2

1 Jan 1962

1005-00-847-9654
Ejection Chute

008479654
S50E220-3: RNCC: 3 | RNVC: 2

20 Sep 1967

1005-00-880-3140
Gun Lubricator Tube

008803140
133B7484-2: RNCC: 3 | RNVC: 2
1005PL0959239: RNCC: 6 | RNVC: 9

3 Nov 1967

1005-00-884-0810
Mounting Pin

008840810
387B448P2: RNCC: 3 | RNVC: 2
387B448P2-1: RNCC: 3 | RNVC: 2
387B448P2: RNCC: 3 | RNVC: 2
387B448P2: RNCC: 5 | RNVC: 2
10162747: RNCC: 6 | RNVC: 9
1005PL0693707: RNCC: 6 | RNVC: 9
C9553: RNCC: 7 | RNVC: 2

17 Nov 1967

1005-00-891-7926
Gun Mounting Adapter

008917926
11697609: RNCC: 3 | RNVC: 2
11697609: RNCC: 5 | RNVC: 9

20 Jan 1967

1005-00-887-3096
Gun Drive Seat

008873096
624850: RNCC: 3 | RNVC: 2
607392: RNCC: 5 | RNVC: 9

1 Jan 1962

1005-00-921-5148
Front Lug

009215148
65B9772-2: RNCC: 3 | RNVC: 2
65B9772-2: RNCC: 5 | RNVC: 9

3 Nov 1965

1005-00-922-8053
Sleeve And Stripper

009228053
11701217: RNCC: 3 | RNVC: 2
11701217: RNCC: 5 | RNVC: 9

25 Dec 1965

1005-00-933-8089
Flash Suppressor

009338089
8448576: RNCC: 3 | RNVC: 2
62348: RNCC: 5 | RNVC: 2
1005-933-8089: RNCC: 6 | RNVC: 9
62370: RNCC: C | RNVC: 1

5 Oct 1966

1005-00-934-8320
Detent Brake Ring Body

009348320
7012753: RNCC: 3 | RNVC: 2

1 Mar 1967

1005-00-928-6189
Gun Mount Cover

009286189
11686597: RNCC: 3 | RNVC: 2
A10714: RNCC: 5 | RNVC: 2
1005PL0904733: RNCC: 6 | RNVC: 9
1005009286189: RNCC: 6 | RNVC: 9
105009286189: RNCC: 6 | RNVC: 9

26 Aug 1966

1005-00-946-1867
Fe Adapter Assembly

009461867
1310C5677-2: RNCC: 3 | RNVC: 2
C9865-2: RNCC: 5 | RNVC: 9

7 Mar 1966

1005-00-945-9756
Mount Pintle

009459756
11010408: RNCC: 3 | RNVC: 2
11010408: RNCC: 5 | RNVC: 9

16 Mar 1966

1005-00-992-7280
Flash Suppressor Lock Washer

009927280
8448577: RNCC: 3 | RNVC: 2
62126: RNCC: 5 | RNVC: 2
10059927280: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-01-003-2802
Chute Box End

010032802
201F700-3: RNCC: 1 | RNVC: 2
1321C17567: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-025-2917
Gun Guide Shaft

010252917
125C3860: RNCC: 3 | RNVC: 2

29 Jul 1976

1005-00-518-9756
Flat Spring

005189756
5189756: RNCC: 3 | RNVC: 2
A10738: RNCC: 5 | RNVC: 2
5360PL0947901: RNCC: 6 | RNVC: 9
1015005189756: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-726-6161
Cocking Lever Pin Locking Pin

007266161
7266161: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-017-9543
Small Arms Sling Swivel

000179543
8448571: RNCC: 3 | RNVC: 2
62280: RNCC: 5 | RNVC: 2
CF62280: RNCC: 5 | RNVC: 2
711419708505: RNCC: 6 | RNVC: 9
10050179543: RNCC: 6 | RNVC: 9
1005000179543: RNCC: 6 | RNVC: 9

1 Jan 1961

1005-00-034-8034
Spring Assembly

000348034
8715571: RNCC: 3 | RNVC: 2
0740624: RNCC: 5 | RNVC: 2
1005000348034: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-051-1545
Front Fixed Scoop

000511545
175F525: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-3607
Bayonet-Knife Grip

000513607
11010068: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-072-5386
Recoil Pad Plug

000725386
7791674: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-102-7983
Transfer Guide

001027983
905D538: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-111-4650
Booster Assy Plate

001114650
66F12694-2: RNCC: 3 | RNVC: 2
66F12694-2: RNCC: 5 | RNVC: 9

16 Aug 1968

1005-00-131-1914
Lever Assembly

001311914
11644155: RNCC: 3 | RNVC: 2

9 Dec 1968

1005-00-258-4944
Gun Muzzle Ring Assembly

002584944
68A732011-1003: RNCC: 3 | RNVC: 2

24 Jun 1973

1005-00-258-4942
Gun Muzzle Cam Ring

002584942
68A732011-2003: RNCC: 3 | RNVC: 2
68A732011-2003: RNCC: 5 | RNVC: 2

24 Jun 1973

1005-00-269-5240
Drive Assembly

002695240
117D2041: RNCC: 3 | RNVC: 2

20 Jul 1973

1005-00-275-5634
Ammunition Cartridge Guide

002755634
176F583: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5628
Adapter Bracket

002755628
117D2748: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-276-7894
Ammunition Cartridge Guide

002767894
176F585: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-423-4352
Ammunition Chute End Clamp

004234352
8439076: RNCC: 1 | RNVC: 2
1311C20979: RNCC: 3 | RNVC: 2
8439076-1: RNCC: 5 | RNVC: 2
1311C6688: RNCC: 5 | RNVC: 9
8439076: RNCC: 5 | RNVC: 9
1005PL1374795: RNCC: 6 | RNVC: 9

1 May 1974

1005-00-450-7290
Elevation Mount

004507290
125C2734: RNCC: 3 | RNVC: 2

17 Dec 1969

1005-00-477-5685
Thrust Race

004775685
K306-000711: RNCC: 3 | RNVC: 2

12 Jun 1974

1005-00-477-5694
Cam Retainer

004775694
K403-000591: RNCC: 3 | RNVC: 2
K403-000591: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5786
Control-Valve Kit

004775786
MC8095: RNCC: 3 | RNVC: 2
MC8095: RNCC: 5 | RNVC: 9
MC8095: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-494-4577
Unloader Shaft

004944577
101D4370: RNCC: 3 | RNVC: 2
101D4370: RNCC: 5 | RNVC: 1

6 Jun 1969

1005-00-498-2747
Adjustment Cam

004982747
116C3447: RNCC: 3 | RNVC: 2
116C3447: RNCC: 5 | RNVC: 2
116C3447: RNCC: 5 | RNVC: 9

6 Oct 1969

1005-00-501-3504
Knob

005013504
5013504: RNCC: 3 | RNVC: 2
A10499: RNCC: 5 | RNVC: 2
5013504: RNCC: 5 | RNVC: 9
5355PL0946124: RNCC: 6 | RNVC: 9
5355-00-501- 3504: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-514-0137
Elevating Handwheel Click Ring

005140137
5140137: RNCC: 3 | RNVC: 2
A20172: RNCC: 5 | RNVC: 2
717124424401: RNCC: 5 | RNVC: 9
1005PL0962029: RNCC: 6 | RNVC: 9
1005-514-0137: RNCC: 6 | RNVC: 9
1005005140137: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-514-0215
Compression Helical Spring

005140215
5140215: RNCC: 3 | RNVC: 2
A20565: RNCC: 5 | RNVC: 2
A10779: RNCC: 5 | RNVC: 2
5140215: RNCC: 5 | RNVC: 9
717124440502: RNCC: 6 | RNVC: 9
5360PL0947889: RNCC: 6 | RNVC: 9
5340-514-0215: RNCC: 6 | RNVC: 9
5360-514-0215: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-515-2869
Recoil Mechanism Buffer

005152869
5152869: RNCC: 3 | RNVC: 2
201060010: RNCC: 5 | RNVC: 2
A10337: RNCC: 5 | RNVC: 2
3662003922: RNCC: 5 | RNVC: 2
1005PL0902388: RNCC: 6 | RNVC: 9
1005005152869: RNCC: 6 | RNVC: 9
366-200-3922: RNCC: 6 | RNVC: 9
10093795: RNCC: 6 | RNVC: 9
75F2034: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-565-3670
Azimuth Switch Assembly

005653670
114C2023: RNCC: 3 | RNVC: 2
114C2023: RNCC: 5 | RNVC: 2
114C2023: RNCC: 5 | RNVC: 2

21 Nov 1974

1005-00-570-3712
Extension Scoop Cam

005703712
201F929: RNCC: 3 | RNVC: 2
198F251: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-517-4123
Traversing Mechanism Click Ring

005174123
5174123: RNCC: 3 | RNVC: 2
A10728: RNCC: 5 | RNVC: 2
A20183: RNCC: 5 | RNVC: 2
717124418704: RNCC: 5 | RNVC: 9
1005PL0902391: RNCC: 6 | RNVC: 9
1005005174123: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3847
Ammunition Cartridge Guide

005703847
105D3422: RNCC: 3 | RNVC: 2
105D3422: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-572-3207
Gun System Drive Assembly

005723207
201F136: RNCC: 3 | RNVC: 2
201F136: RNCC: 5 | RNVC: 2
201F136: RNCC: 5 | RNVC: 2

4 Dec 1974

1005-00-600-8899
Handle

006008899
ARMYDWG6008899: RNCC: 3 | RNVC: 2
6008899: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8943
Tension Spring

006008943
6008943: RNCC: 3 | RNVC: 2
A10590: RNCC: 5 | RNVC: 2
3662001317: RNCC: 5 | RNVC: 2
201010005: RNCC: 5 | RNVC: 2
10085356: RNCC: 6 | RNVC: 9
5360PL0947917: RNCC: 6 | RNVC: 9
1005-600-8943: RNCC: 6 | RNVC: 9
1005006008943: RNCC: 6 | RNVC: 9
366-200-1317: RNCC: 6 | RNVC: 9
75F6078: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-612-9069
Cam Link

006129069
905D495: RNCC: 3 | RNVC: 2

17 Oct 1969

1005-00-630-1446
Small Arms Cleaning Rod

006301446
6301446: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-650-4510
Small Arms Cleaning Rod Case

006504510
7267754: RNCC: 3 | RNVC: 9
1005006504510: RNCC: 6 | RNVC: 9
1005-650-4510: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-710-9286
Sear Block Detent

007109286
7793195: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-704-2930
Mount Pintle

007042930
7042930: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-716-2704
Small Arms Cleaning Rod Swab Holder Section

007162704
7162704: RNCC: 3 | RNVC: 2
A10231: RNCC: 5 | RNVC: 2
RTI-1603: RNCC: 5 | RNVC: 2
7162704: RNCC: 5 | RNVC: 9
1005PL1719002: RNCC: 6 | RNVC: 9
1005007162704: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-726-5222
Trunnion Block Shim

007265222
7265222: RNCC: 3 | RNVC: 2
6008951-7: RNCC: 3 | RNVC: 2
B89516: RNCC: 5 | RNVC: 9
7265222: RNCC: 5 | RNVC: 9
B89516: RNCC: 5 | RNVC: 9
6008951-7: RNCC: 5 | RNVC: 9
6008951: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-726-5861
Trunnion Block Shim

007265861
6008951-9: RNCC: 3 | RNVC: 2
7265861-9: RNCC: 5 | RNVC: 2
7265861: RNCC: 5 | RNVC: 9
6008951-9: RNCC: 5 | RNVC: 9
6008951: RNCC: 5 | RNVC: 9
6008951: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-731-2646
Belt Feed Switch

007312646
7312646: RNCC: 3 | RNVC: 9
7312646: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-726-5211
Cocking Lever

007265211
7265211: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-732-6280
Secto Retainer Assy

007326280
7791076: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-796-7038
Control Handle Manaul

007967038
7790951: RNCC: 3 | RNVC: 2
1005007967038: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-830-4183
Saddle Assy Rod

008304183
66B12633: RNCC: 3 | RNVC: 2

1 Sep 1967

1005-00-830-4203
Front Sight

008304203
66B12635: RNCC: 3 | RNVC: 2

1 Sep 1967

1005-00-853-7353
Gun Actuator Switch

008537353
135B5825: RNCC: 3 | RNVC: 2

22 Nov 1966

1005-00-868-3176
Control Unit Ball

008683176
MC10848: RNCC: 3 | RNVC: 2
MC10848: RNCC: 5 | RNVC: 9

20 Oct 1967

1005-00-893-8289
Exit Unit Assembly Plate

008938289
175F514: RNCC: 3 | RNVC: 2
1005PL1792470: RNCC: 6 | RNVC: 9

23 Jan 1967

1005-00-902-2008
Gun Component Retainer

009022008
18623: RNCC: 3 | RNVC: 2
F18623: RNCC: 5 | RNVC: 1
F18623: RNCC: 5 | RNVC: 2

15 Apr 1968

1005-00-918-2617
Handle Grip Tube

009182617
5009369: RNCC: 3 | RNVC: 2
201060002: RNCC: 5 | RNVC: 2
A10148: RNCC: 5 | RNVC: 2
717124420101: RNCC: 5 | RNVC: 9
1005009182617: RNCC: 6 | RNVC: 9
10059182617: RNCC: 6 | RNVC: 9
1005PL0904731: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-922-8048
Machine Gun Breech Lock Cam

009228048
11701137: RNCC: 3 | RNVC: 9

25 Dec 1965

1005-00-934-8312
Magazine Bracket

009348312
11686976: RNCC: 3 | RNVC: 2
1005009348312: RNCC: 6 | RNVC: 9

1 Mar 1967

1005-00-992-6667
Safety Detent

009926667
8448631: RNCC: 3 | RNVC: 2
SP61785: RNCC: 5 | RNVC: 1
61785: RNCC: 5 | RNVC: 2
CF61785: RNCC: 5 | RNVC: 2
SP 61785: RNCC: 5 | RNVC: 2
1005009926667: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-00-999-8815
Cartridge Ejector

009998815
F17017: RNCC: 3 | RNVC: 2
17017: RNCC: 5 | RNVC: 9

30 Mar 1966

1005-01-003-7157
Ammunition Chute

010037157
1221C17542: RNCC: 3 | RNVC: 2
201F699-2: RNCC: 5 | RNVC: 2

3 May 1975

1005-01-025-4603
Recoil Adapter Piston Rod

010254603
7268311: RNCC: 3 | RNVC: 2
7268311: RNCC: 5 | RNVC: 9

2 Aug 1976

1005-00-052-8253
Ammunition Chute

000528253
1311C6672-4: RNCC: 3 | RNVC: 2
117D2204-2: RNCC: D | RNVC: 9

18 May 1967

1005-00-051-1568
Fee Scoop Extension

000511568
905D450: RNCC: 3 | RNVC: 2
1005PL0960901: RNCC: 6 | RNVC: 9

11 May 1967

1005-00-084-3129
Ammunition Chute

000843129
65751-03010-041: RNCC: 3 | RNVC: 2

15 Dec 1967

1005-00-056-5855
Chute End Assembly

000565855
1311C6688-4: RNCC: 3 | RNVC: 2
176F736-2: RNCC: 5 | RNVC: 2

27 May 1967

1005-00-110-7196
Top Carriage Assembly

001107196
204R497-2: RNCC: 3 | RNVC: 2

9 Aug 1968

1005-00-104-8275
Gun Drive Gear Assy

001048275
135B6233: RNCC: 3 | RNVC: 2

23 Jun 1968

1005-00-234-9593
Electrical Support Assembly

002349593
10930479: RNCC: 3 | RNVC: 2

5 Jan 1968

1005-00-216-6824
Feed Unit Rear Guide

002166824
905D352-2: RNCC: 3 | RNVC: 2
1005PL0911284: RNCC: 6 | RNVC: 9

2 May 1973

1005-00-275-5550
Idler Sprocket Shaft

002755550
139C6582: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-269-5252
Pin Retainer

002695252
162B8217: RNCC: 3 | RNVC: 2

20 Jul 1973

1005-00-275-5560
Ammunition Chute Adapter

002755560
0721C14230: RNCC: 3 | RNVC: 2
176F736: RNCC: 7 | RNVC: 2

4 Aug 1973

1005-00-276-7893
Tapered Mounting Post

002767893
162B8357-2: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-280-0922
Chute End Assembly

002800922
1311C14226-3: RNCC: 3 | RNVC: 2
176F736-1: RNCC: 7 | RNVC: 2

15 Aug 1973

1005-00-280-7245
Scoop Disc Retainer

002807245
133B7493-2: RNCC: 3 | RNVC: 2

17 Aug 1973

1005-00-305-0725
Torsion Helical Spring

003050725
8412295: RNCC: 3 | RNVC: 2
A20148: RNCC: 5 | RNVC: 2
8412295: RNCC: 5 | RNVC: 9
1005003050725: RNCC: 6 | RNVC: 9
5360-305-0725: RNCC: 6 | RNVC: 9
717124440205: RNCC: 6 | RNVC: 9
5360PL0946914: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-423-4296
Plate Housing Azimu

004234296
L4-81A-311: RNCC: 3 | RNVC: 2
8437167-7: RNCC: 5 | RNVC: 9
1005-423-4296: RNCC: 6 | RNVC: 9

1 May 1974

1005-00-406-1570
Top Sling Adaptor Kit

004061570
8448471: RNCC: 3 | RNVC: 2
1005004061570: RNCC: 5 | RNVC: 2
711419708703: RNCC: 5 | RNVC: 9

10 Apr 1970

1005-00-438-7321
Extension Barrel

004387321
8448315: RNCC: 3 | RNVC: 2
8448315: RNCC: 5 | RNVC: 2
8448315: RNCC: 5 | RNVC: 2

26 Nov 1969

1005-00-453-5826
Rotor Track

004535826
11838549: RNCC: 3 | RNVC: 2
581911838549: RNCC: 5 | RNVC: 2

9 Apr 1969

1005-00-490-1535
Right Fairing Assy

004901535
204R341-58: RNCC: 3 | RNVC: 2

19 Sep 1969

1005-00-481-9734
Elevation Stow Bracket Assembly

004819734
101D4793: RNCC: 3 | RNVC: 2
101D4793: RNCC: 3 | RNVC: 2
11830969: RNCC: 5 | RNVC: 2

14 Sep 1970

1005-00-500-9353
Compression Helical Spring

005009353
5009353: RNCC: 3 | RNVC: 2
A10072: RNCC: 5 | RNVC: 2
201020103: RNCC: 5 | RNVC: 2
3662004890: RNCC: 5 | RNVC: 2
5360PL0946952: RNCC: 6 | RNVC: 9
1005005009353: RNCC: 6 | RNVC: 9
1005-500-9353: RNCC: 6 | RNVC: 9
366-200-4890: RNCC: 6 | RNVC: 9
5360005009353: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-514-1080
Pintle Lock Rel Cam

005141080
5141080: RNCC: 3 | RNVC: 2
A10796: RNCC: 5 | RNVC: 2
5141080: RNCC: 5 | RNVC: 2
717124420706: RNCC: 5 | RNVC: 9
1005005141080: RNCC: 6 | RNVC: 9
1005PL0902385: RNCC: 6 | RNVC: 9
1005-514-1080: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-516-2762
Housing Assembly

005162762
189F724: RNCC: 3 | RNVC: 2

11 Aug 1974

1005-00-516-2765
Seal Assembly

005162765
162B8742: RNCC: 3 | RNVC: 2
162B8742: RNCC: 5 | RNVC: 2

11 Aug 1974

1005-00-516-3465
Chute Center Section

005163465
11830873-102: RNCC: 1 | RNVC: 2
1212B16034: RNCC: 3 | RNVC: 2
205F192-102: RNCC: 5 | RNVC: 9

11 Aug 1974

1005-00-519-6420
Resolver Support

005196420
117D2961: RNCC: 3 | RNVC: 2

16 Aug 1974

1005-00-555-9338
Tripod Mount Leg

005559338
5559338: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-570-3680
Actuator Arm

005703680
201F924: RNCC: 3 | RNVC: 2
201F137: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3710
Cam Follower

005703710
198F256-1: RNCC: 3 | RNVC: 2
198F256: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3720
Gun End Plate

005703720
198F245: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3727
Feeder Mechanism Housing

005703727
198F223: RNCC: 3 | RNVC: 2
198F223: RNCC: 5 | RNVC: 2
198F223: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-570-3855
Gun Parts Kit

005703855
MC8097: RNCC: 3 | RNVC: 2
MC8097: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-574-1048
Box End Fitting

005741048
S762-1415: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-602-5284
Bolt Stud Assembly

006025284
7268490: RNCC: 3 | RNVC: 2
0740606: RNCC: 5 | RNVC: 2
A10649: RNCC: 5 | RNVC: 2
1005006025284: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-603-4834
Crew-Served Weapon Elevating And Traversing Mechanism

006034834
7791119: RNCC: 3 | RNVC: 2
7791119: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-610-8986
Pintle Lock Assembly

006108986
338679: RNCC: 3 | RNVC: 2
6108986: RNCC: 5 | RNVC: 2
6108986: RNCC: 5 | RNVC: 9
6108986: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-621-8188
Chute Section Assy

006218188
10644: RNCC: 3 | RNVC: 2
8438870-3: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-714-6365
Coupler Disconnecto

007146365
7146365: RNCC: 3 | RNVC: 2
A10563: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-726-5183
Firing Spring Stop

007265183
7265183: RNCC: 3 | RNVC: 9
7265183: RNCC: 5 | RNVC: 2
A20287: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-726-6109
Small Arms Cleaning Rod Section

007266109
7266109: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-731-2029
Flat Spring

007312029
7312029: RNCC: 3 | RNVC: 2
201010035: RNCC: 5 | RNVC: 2
A10432: RNCC: 5 | RNVC: 2
5360PL0947928: RNCC: 6 | RNVC: 9
1005007312029: RNCC: 6 | RNVC: 9
75F6022: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-754-5296
Cent Clamp Assembly

007545296
7791616: RNCC: 3 | RNVC: 2
7791616: RNCC: 5 | RNVC: 2
7791616: RNCC: 5 | RNVC: 9
7790177: RNCC: 5 | RNVC: 9
5342PL1337487: RNCC: 6 | RNVC: 9

1 Jan 1961

1005-00-772-0192
Stud Plunger

007720192
7792986: RNCC: 3 | RNVC: 2
7792986: RNCC: 5 | RNVC: 9

1 Jan 1962

1005-00-827-4537
Lubricato Pump Assy

008274537
200626489: RNCC: 3 | RNVC: 2
135B6031: RNCC: 3 | RNVC: 9
200626489: RNCC: 5 | RNVC: 9
1005PL0959261: RNCC: 6 | RNVC: 9

23 Aug 1967

1005-00-856-2109
Barrel Extension Interlock

008562109
7791278: RNCC: 3 | RNVC: 2
1005008562109: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-00-856-2108
Gun Hand Guard

008562108
7791286: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-00-865-5247
Control Unit Seat

008655247
MC10847: RNCC: 3 | RNVC: 2
MC10847: RNCC: 5 | RNVC: 9

16 Oct 1967

1005-00-869-2629
Control Un Push Rod

008692629
MC10846: RNCC: 3 | RNVC: 2
MC10846: RNCC: 5 | RNVC: 9
MC10846: RNCC: 5 | RNVC: 9

23 Oct 1967

1005-00-874-9496
Drag Link Tube

008749496
12M662-9: RNCC: 3 | RNVC: 2

3 Nov 1967

1005-00-876-5709
Control Unit Spring

008765709
MC10866: RNCC: 3 | RNVC: 2
MC10866: RNCC: 5 | RNVC: 9

6 Nov 1967

1005-00-938-4550
Gun Feed Tbar Guide

009384550
175F266: RNCC: 3 | RNVC: 2

15 Mar 1967

1005-00-999-1509
Firing Pin Retainer Pin

009991509
SP 62335: RNCC: 3 | RNVC: 2
LMP114A: RNCC: 5 | RNVC: 1
SP62335: RNCC: 5 | RNVC: 1
CF62335: RNCC: 5 | RNVC: 2
LMP 114A: RNCC: 5 | RNVC: 2
62335: RNCC: 5 | RNVC: 2
8448504: RNCC: 5 | RNVC: 2
53159991509: RNCC: 6 | RNVC: 9
1005009991509: RNCC: 6 | RNVC: 9

5 Jan 1966

1005-01-003-2803
Gun Subassembly Chute

010032803
201F700-1: RNCC: 1 | RNVC: 2
201F700-1: RNCC: 3 | RNVC: 2
1221C17564: RNCC: 5 | RNVC: 2

16 Apr 1975

1005-01-029-1225
Case Eject Chute

010291225
537AS593: RNCC: 3 | RNVC: 2

16 Oct 1976

1005-00-550-4082
Barrel Extension Assembly

005504082
5504082: RNCC: 3 | RNVC: 2
A10479: RNCC: 5 | RNVC: 2
711662807802: RNCC: 6 | RNVC: 9
1005PL0961170: RNCC: 6 | RNVC: 9
1005005504082: RNCC: 6 | RNVC: 9
75F4225: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-600-8935
Gunsight Cover

006008935
6008935: RNCC: 3 | RNVC: 2
3662008699: RNCC: 5 | RNVC: 2
201010017: RNCC: 5 | RNVC: 2
A10298: RNCC: 5 | RNVC: 2
10074186: RNCC: 6 | RNVC: 9
1005PL0902921: RNCC: 6 | RNVC: 9
1005006008935: RNCC: 6 | RNVC: 9
3662008699: RNCC: 6 | RNVC: 9
6008935: RNCC: 6 | RNVC: 9
75F6006: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-922-8050
Clearing Guide

009228050
11701140: RNCC: 3 | RNVC: 2
11701140: RNCC: 5 | RNVC: 9

25 Dec 1965

1005-00-937-1388
Firing Pin Assembly

009371388
8436638: RNCC: 3 | RNVC: 2

16 Nov 1966

1005-00-884-0847
Valve System Piston

008840847
26536723: RNCC: 3 | RNVC: 2
26536723: RNCC: 5 | RNVC: 2

17 Nov 1967

1005-00-477-5021
Magazine Cap Detent

004775021
17451: RNCC: 3 | RNVC: 2
F17451: RNCC: 5 | RNVC: 1
F17451: RNCC: 5 | RNVC: 2

12 Sep 1969

1005-00-501-3611
Plunger Detent

005013611
5013611: RNCC: 3 | RNVC: 2
3662001064: RNCC: 5 | RNVC: 2
201010503: RNCC: 5 | RNVC: 2
A10365: RNCC: 5 | RNVC: 2
5340PL0928022: RNCC: 6 | RNVC: 9
10074141: RNCC: 6 | RNVC: 9
1005-501-3611: RNCC: 6 | RNVC: 9
75F6048: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-570-3853
Scoop Extension Shaft

005703853
105D3498: RNCC: 3 | RNVC: 2

1 Dec 1974

NSN 1005-00-511-9054 005119054 COVER,ACCESS

1005-00-511-9054
Access Cover

005119054
7268276: RNCC: 3 | RNVC: 2
0740602: RNCC: 5 | RNVC: 2
A10648: RNCC: 5 | RNVC: 2
1005005119054: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-01-034-4113
Machine Gun Grip

010344113
11826232-2: RNCC: 3 | RNVC: 2
11826232-2: RNCC: 5 | RNVC: 2
3602010167: RNCC: 5 | RNVC: 9
1005010344113: RNCC: 6 | RNVC: 9
11826232-2: RNCC: D | RNVC: 9

25 Jan 1977

1005-00-051-1454
Shoulder Elem Shaft

000511454
114C2807: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-1491
Chute Clip

000511491
135B5559: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-051-3608
Bayonet-Knife Grip

000513608
11010069: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-056-5572
Block And Piston As

000565572
322518: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-056-5774
Aircraft Armament Pod Adapter

000565774
135B5754: RNCC: 3 | RNVC: 2
10104437: RNCC: 6 | RNVC: 9

27 May 1967

1005-00-087-8998
Hand Guard Slip Ring

000878998
SP 62483: RNCC: 3 | RNVC: 2
SP62483: RNCC: 5 | RNVC: 1
CF62483: RNCC: 5 | RNVC: 2
62483: RNCC: 5 | RNVC: 2
8448712: RNCC: 5 | RNVC: 2
1005000878998: RNCC: 6 | RNVC: 9

13 May 1967

1005-00-130-5466
Housing Cap Plate

001305466
11644081: RNCC: 3 | RNVC: 2

6 Dec 1968

1005-00-140-7628
Lock Cradle

001407628
439946-1: RNCC: 3 | RNVC: 2

27 Aug 1971

1005-00-158-1676
Gun Cover

001581676
299946PC2: RNCC: 3 | RNVC: 2
872992: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 1005-00-268-6426 002686426 PIN,TIMING

1005-00-268-6426
Timing Pin

002686426
139C6407: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-272-7825
Idler Shaft

002727825
162B8114: RNCC: 3 | RNVC: 2

25 Jul 1973

1005-00-275-5619
Rear Element Guide

002755619
117D2036: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5721
Flexible Shaft Connector

002755721
139C6579: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-279-0552
Ammunition Cartridge Guide

002790552
176F588: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-300-5378
Scabbard Restraining Lace

003005378
7267136-2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-368-0362
Lubricator Support Assembly

003680362
198F205: RNCC: 3 | RNVC: 2

27 Feb 1974

1005-00-403-5804
Small Arms Cleaning Rod Case

004035804
8448751: RNCC: 3 | RNVC: 2
1005004035804: RNCC: 6 | RNVC: 9

24 Jun 1970

1005-00-437-4759
Small Arms Sling Swivel

004374759
F26556: RNCC: 3 | RNVC: 2
14567: RNCC: 5 | RNVC: 9
478-0308: RNCC: 6 | RNVC: 9

29 Aug 1969

1005-00-437-4747
Hammer Plunger

004374747
17465: RNCC: 3 | RNVC: 2
F17465: RNCC: 5 | RNVC: 2

29 Aug 1969

1005-00-441-7699
Magazine Cap Detent

004417699
F16791: RNCC: 3 | RNVC: 2
F16791: RNCC: 3 | RNVC: 2
16791: RNCC: 3 | RNVC: 9
F16791: RNCC: 5 | RNVC: 2

3 Dec 1969

1005-00-488-1113
Oil Buffer Tube

004881113
5508146: RNCC: 3 | RNVC: 2

4 Jun 1969

1005-00-494-4525
Feeder Elemen Shaft

004944525
114C2808-2: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-494-4527
Feede Sprocket Assy

004944527
116C3396: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-498-2750
Cam Roller

004982750
135B5992: RNCC: 3 | RNVC: 2
135B5992: RNCC: 5 | RNVC: 2

6 Oct 1969

1005-00-498-2749
Guide Shaft Roller

004982749
135B5991: RNCC: 3 | RNVC: 2
135B5991: RNCC: 5 | RNVC: 2
135B5991: RNCC: 5 | RNVC: 9

6 Oct 1969

1005-00-500-9277
Oil Buffer Packing Gland Plug

005009277
5009277: RNCC: 3 | RNVC: 2

1 Jan 1961

1005-00-550-4036
Small Arms Cleaning Brush

005504036
5504036: RNCC: 3 | RNVC: 2
5504036: RNCC: 3 | RNVC: 9
308144: RNCC: 5 | RNVC: 2
1005005504036: RNCC: 6 | RNVC: 9
1005-550-4036: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-555-9333
Traver Bar Assembly

005559333
5559333: RNCC: 3 | RNVC: 2
5559333: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-555-9332
Mount Pintle

005559332
5559332: RNCC: 3 | RNVC: 2
A10759: RNCC: 5 | RNVC: 2
717124415105: RNCC: 5 | RNVC: 9
1005PL0958582: RNCC: 6 | RNVC: 9
1005005559332: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-564-5325
Oil Buffer Lock Assy

005645325
5645325: RNCC: 3 | RNVC: 2
5645325: RNCC: 3 | RNVC: 9
1005-564-5325: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3703
Scoop Extension

005703703
201F112: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3867
Gun Control Lever

005703867
MC14115: RNCC: 3 | RNVC: 2
MC14115: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-501-3693
Compression Helical

005013693
5013693: RNCC: 3 | RNVC: 2
201050009: RNCC: 5 | RNVC: 2
A10303: RNCC: 5 | RNVC: 2
3662004522: RNCC: 5 | RNVC: 2
181481: RNCC: 5 | RNVC: 2
A20564: RNCC: 5 | RNVC: 2
5360PL0947883: RNCC: 6 | RNVC: 9
10093002: RNCC: 6 | RNVC: 9
75F6132: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-574-1045
Gun End Fitting

005741045
S762-1405-5: RNCC: 3 | RNVC: 2
S762-1405-5: RNCC: 3 | RNVC: 2

17 Jan 1968

1005-00-570-4056
Gun Tee Pin

005704056
167C1084: RNCC: 3 | RNVC: 2
352258903655: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-600-8763
Rod Assy

006008763
6008763: RNCC: 3 | RNVC: 2
A10525: RNCC: 5 | RNVC: 2
201040300: RNCC: 5 | RNVC: 2
3662005653: RNCC: 5 | RNVC: 2
6008763: RNCC: 5 | RNVC: 9
10074391: RNCC: 6 | RNVC: 9
1005006008763: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5096
Retainer Plunger

006085096
7269123: RNCC: 3 | RNVC: 2
1005006085096: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-610-8910
Pintle Clamping Block

006108910
6108910: RNCC: 3 | RNVC: 2
1005006108910: RNCC: 6 | RNVC: 9
5749745-089: RNCC: C | RNVC: 1
6108910: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-614-7888
Screw Assy

006147888
6147888: RNCC: 3 | RNVC: 2
1005006147888: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5203
Carrying Lig Handle

006085203
7269231: RNCC: 3 | RNVC: 2
1005006085203: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-653-3913
Machine Gun C0ver

006533913
6533913: RNCC: 3 | RNVC: 9
6533913: RNCC: 5 | RNVC: 2
6533913: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-699-9882
Removab Rotor Track

006999882
7268552: RNCC: 3 | RNVC: 2
7268552: RNCC: 5 | RNVC: 1
7268552: RNCC: 5 | RNVC: 2
671B370P1: RNCC: 5 | RNVC: 9
7268552: RNCC: 5 | RNVC: 9
7268552: RNCC: 5 | RNVC: 9
1005PL0960330: RNCC: 6 | RNVC: 9
1005006999882: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-699-9935
Gun Support

006999935
7268748: RNCC: 3 | RNVC: 2
7268748: RNCC: 5 | RNVC: 9
1005PL0959797: RNCC: 6 | RNVC: 9
7268748: RNCC: C | RNVC: 1

1 Jun 1966

1005-00-701-2756
Brake Shoe Cam

007012756
7012756: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-710-6603
Cover Detent

007106603
7793132: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-711-1785
Machine Gun Breech Lock Cam

007111785
7793083: RNCC: 3 | RNVC: 2
1005007111785: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-716-2196
Trigger Bar

007162196
7162196: RNCC: 3 | RNVC: 2
7162196: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-716-2761
B Pawl Assembly Arm

007162761
7162761: RNCC: 3 | RNVC: 9
A20277: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-716-2764
Firing Pin

007162764
7162764: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-809-0715
Back Plate Latch

008090715
8448210: RNCC: 3 | RNVC: 2

3 May 1968

1005-00-884-2169
Timing Pin Set

008842169
5910309: RNCC: 3 | RNVC: 2

1 Jan 1960

1005-00-903-1146
Empty Cartridge Bag

009031146
11699740: RNCC: 3 | RNVC: 2

1 Jan 1960

1005-00-919-3920
Gun Support

009193920
65C9750: RNCC: 3 | RNVC: 2
65C9750: RNCC: 5 | RNVC: 2
65C9750: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-937-1024
Rifle Carrying Case

009371024
23AA048: RNCC: 3 | RNVC: 2
RC002: RNCC: 5 | RNVC: 9
RC002: RNCC: 5 | RNVC: 9
4600: RNCC: D | RNVC: 9

8 Nov 1966

1005-00-999-8809
Bolt Stop

009998809
17013: RNCC: 3 | RNVC: 2

30 Mar 1966

1005-01-003-2804
Ammunition Chute

010032804
201F700: RNCC: 1 | RNVC: 2
0621D17562: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-003-6214
Gun Box End Assembly

010036214
201F699-3: RNCC: 1 | RNVC: 2
1321C17545: RNCC: 3 | RNVC: 2

1 May 1975

1005-01-005-4494
Unlocking Cam Kit

010054494
12007386: RNCC: 3 | RNVC: 2
588881900100: RNCC: 5 | RNVC: 2
12007386: RNCC: 5 | RNVC: 2
1005PL0960032: RNCC: 6 | RNVC: 9
1005010054494: RNCC: 6 | RNVC: 9

24 Jun 1975

1005-01-032-8152
Flash Suppressor

010328152
11826002: RNCC: 3 | RNVC: 2
11826002: RNCC: 5 | RNVC: 1
11826002: RNCC: 5 | RNVC: 2
11826002: RNCC: 5 | RNVC: 2
3602004365: RNCC: 5 | RNVC: 9
1005010328152: RNCC: 6 | RNVC: 9

23 Dec 1976

1005-01-032-8145
Charger Cable

010328145
11826145: RNCC: 3 | RNVC: 2
11826145: RNCC: 5 | RNVC: 2
3602009913: RNCC: 5 | RNVC: 9
1005010328145: RNCC: 6 | RNVC: 9
11826145: RNCC: D | RNVC: 9

23 Dec 1976

1005-00-877-8892
Firing C Blade Assy

008778892
8436672-1: RNCC: 3 | RNVC: 2

25 Aug 1967

1005-00-893-0902
Blank Ammunition Firing Attachment

008930902
5910570: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-00-893-8376
Gun Wear Plate

008938376
175F132: RNCC: 3 | RNVC: 2
1005PL0693776: RNCC: 6 | RNVC: 9

23 Jan 1967

1005-00-017-9539
Ammunition Feed Pawl

000179539
8448543: RNCC: 3 | RNVC: 2
CF62269: RNCC: 5 | RNVC: 2
62269: RNCC: 5 | RNVC: 2
1005000179539: RNCC: 6 | RNVC: 9
10050179539: RNCC: 6 | RNVC: 9

1 Jan 1961

1005-00-056-5608
Cylinder Bea Sleeve

000565608
322511: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-056-5767
Feeder Bushing Assembly

000565767
135B5790: RNCC: 3 | RNVC: 2
1005PL0959237: RNCC: 6 | RNVC: 9

27 May 1967

1005-00-080-3589
Actuating Weight

000803589
135B5805-2: RNCC: 3 | RNVC: 2
135B5805-2: RNCC: 5 | RNVC: 9

6 Dec 1967

1005-00-072-6112
Deflector Support

000726112
11631739: RNCC: 3 | RNVC: 2

4 Dec 1967

1005-00-136-0785
Safing And Arming A

001360785
114C2976: RNCC: 3 | RNVC: 2

10 Jan 1969

1005-00-215-0037
Front Element Guide

002150037
175F131-2: RNCC: 3 | RNVC: 2

27 Apr 1973

1005-00-275-5719
Outer Gate Arm

002755719
139C6517: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5786
Inner Shaft

002755786
139C6581: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-280-0917
Nose Sensor Arm

002800917
176F676: RNCC: 3 | RNVC: 2

15 Aug 1973

1005-00-282-2124
Drum Support Assembly

002822124
68A732021-1005: RNCC: 3 | RNVC: 2

22 Aug 1973

1005-00-336-2398
Clamp Plate

003362398
7791618: RNCC: 3 | RNVC: 2
7791618: RNCC: 5 | RNVC: 2

16 Dec 1973

1005-00-336-0220
Vci Treated Bore Tube

003360220
7266318: RNCC: 3 | RNVC: 2
7266318: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-381-3806
Tompion

003813806
1211727: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-389-8118
Plain Solid Disk

003898118
8668937: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-477-5759
Overhaul Hydraulic Kit

004775759
MC8096: RNCC: 3 | RNVC: 2
MC8096: RNCC: 5 | RNVC: 9
MC8096: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-481-9735
Turret Switch

004819735
116C3995: RNCC: 3 | RNVC: 2
116C3995: RNCC: 5 | RNVC: 2

14 Sep 1970

1005-00-514-0209
Compression Helical Spring

005140209
5140209: RNCC: 3 | RNVC: 2
5140209: RNCC: 3 | RNVC: 9
A10788: RNCC: 5 | RNVC: 2
5360-514-0209: RNCC: 6 | RNVC: 9
717124440403: RNCC: 6 | RNVC: 9
5360PL0947887: RNCC: 6 | RNVC: 9
5360005140209: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-516-3271
Azimuth Resolver Shaft

005163271
139C7874: RNCC: 3 | RNVC: 2
139C7874: RNCC: 5 | RNVC: 9

11 Aug 1974

1005-00-555-9423
Tripod Mount Leg

005559423
5559423: RNCC: 3 | RNVC: 2
A10768: RNCC: 5 | RNVC: 2
717124411707: RNCC: 5 | RNVC: 9
1005005559423: RNCC: 6 | RNVC: 9
1005PL0902403: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-556-4062
Pistol Grip

005564062
5564062: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-556-4290
Jacket Assembly

005564290
5564290: RNCC: 3 | RNVC: 2
5564290: RNCC: 5 | RNVC: 2
5564290: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-570-3696
Ammunition Cartridge Guide

005703696
201F101: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3702
Entrance Inner Guide

005703702
201F104: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-558-5181
Gearbox Housing

005585181
198F209: RNCC: 3 | RNVC: 2

11 Nov 1974

1005-00-570-3851
Ammunition Cartridge Guide

005703851
105D3425: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-600-8889
Small Arms Sling Swivel

006008889
6008889: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-600-8931
Cover Latch Spring

006008931
6008931: RNCC: 3 | RNVC: 2
201030009: RNCC: 5 | RNVC: 2
A10566: RNCC: 5 | RNVC: 2
5360006008931: RNCC: 6 | RNVC: 9
5360PL0947911: RNCC: 6 | RNVC: 9
5340-600-8931: RNCC: 6 | RNVC: 9
1005006008931: RNCC: 6 | RNVC: 9
75F5046: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-600-8969
Valve Assy

006008969
6008969: RNCC: 3 | RNVC: 2
6008969: RNCC: 3 | RNVC: 9
6008969: RNCC: 5 | RNVC: 9
6008969: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-600-8990
Retracting Slide Plunger

006008990
6008990: RNCC: 3 | RNVC: 2
A10300: RNCC: 5 | RNVC: 2
201050010: RNCC: 5 | RNVC: 2
3662004589: RNCC: 5 | RNVC: 2
1005006008990: RNCC: 6 | RNVC: 9
366-200-4589: RNCC: 6 | RNVC: 9
1005PL0953994: RNCC: 6 | RNVC: 9
10093021: RNCC: 6 | RNVC: 9
75F6133: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-614-7463
Sub Assembly Bolt

006147463
6147463: RNCC: 3 | RNVC: 2
3662005517: RNCC: 5 | RNVC: 2
201020300: RNCC: 5 | RNVC: 2
A10454: RNCC: 5 | RNVC: 2
A10519: RNCC: 5 | RNVC: 2
10074233: RNCC: 6 | RNVC: 9
1005PL0903091: RNCC: 6 | RNVC: 9
1005006147463: RNCC: 6 | RNVC: 9
711662810505: RNCC: 6 | RNVC: 9
75F4050: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-608-5208
Cocking Ha Retainer

006085208
7269237: RNCC: 3 | RNVC: 2
7269237: RNCC: 5 | RNVC: 9
1005006085208: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-625-2988
Mount Pintle

006252988
11660775: RNCC: 3 | RNVC: 2

5 Mar 1975

1005-00-649-9271
Pistol Grip

006499271
7790349: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-699-3005
Small Arms Cleaning Brush

006993005
8Z8514: RNCC: 3 | RNVC: 2
8Z8514: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-707-0725
Gun Mount Cover

007070725
7070725: RNCC: 3 | RNVC: 2
7070725: RNCC: 5 | RNVC: 9
7070725: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-711-0503
Cover Latch

007110503
7793230: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-716-1301
Automatic Gun Stop

007161301
7161301: RNCC: 3 | RNVC: 2
201020007: RNCC: 5 | RNVC: 2
A10127: RNCC: 5 | RNVC: 2
3662005184: RNCC: 5 | RNVC: 2
1005PL0954015: RNCC: 6 | RNVC: 9
10089856: RNCC: 6 | RNVC: 9
366-200-5184: RNCC: 6 | RNVC: 9
1005007161301: RNCC: 6 | RNVC: 9
10057161301: RNCC: 6 | RNVC: 9
3662005184: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-716-2183
Gun Muzzle Cover Assembly

007162183
7162183: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-726-5156
Machine Gun Barrel

007265156
7265156: RNCC: 3 | RNVC: 2
7265156: RNCC: 5 | RNVC: 2
7265156: RNCC: 5 | RNVC: 9
7265156: RNCC: 5 | RNVC: 9
A20284: RNCC: 5 | RNVC: 9
7265156: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-726-6302
Back Plate Assembly

007266302
7266302: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-731-2709
Sear Slide

007312709
7312709: RNCC: 3 | RNVC: 2
7312709: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-731-2744
Breech Lo Depressor

007312744
7312744: RNCC: 3 | RNVC: 9

1 Jan 1961

1005-00-731-3180
Belt Feed Slide

007313180
7313180: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-754-5269
C Solenoid Assembly

007545269
11010205: RNCC: 3 | RNVC: 2
L-3505: RNCC: 5 | RNVC: 2
11010205: RNCC: 5 | RNVC: 9
11010205: RNCC: 5 | RNVC: 9
5945PL1337478: RNCC: 6 | RNVC: 9
11010205: RNCC: C | RNVC: 1

1 Jan 1960

1005-00-795-7947
Bolt Retracting Pin Retainer

007957947
7793031: RNCC: 3 | RNVC: 2
7793031: RNCC: 3 | RNVC: 9
1005007957947: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-869-2613
Cylinder B Retainer

008692613
322512: RNCC: 3 | RNVC: 2

23 Oct 1967

1005-00-824-3531
Feede Sprocket Assy

008243531
114C2985: RNCC: 3 | RNVC: 2
114C2985: RNCC: 5 | RNVC: 2

11 Aug 1967

1005-00-872-3147
Firing Contact Assembly

008723147
11010399: RNCC: 3 | RNVC: 2
11010399: RNCC: 5 | RNVC: 2
11010399: RNCC: 5 | RNVC: 2
11010399: RNCC: 5 | RNVC: 2
11010399: RNCC: 5 | RNVC: 9
11010399: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-909-3019
Mount Pintle

009093019
11699669: RNCC: 3 | RNVC: 9
11699669: RNCC: 5 | RNVC: 2

1 Jan 1960

1005-00-981-1252
Butt Plate Catch

009811252
7790693: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-00-992-7291
Cartridge Ejector

009927291
SP 61564: RNCC: 3 | RNVC: 2
SP61564: RNCC: 5 | RNVC: 1
CF61564: RNCC: 5 | RNVC: 2
61564: RNCC: 5 | RNVC: 2
8448515: RNCC: 5 | RNVC: 2
711419702902: RNCC: 6 | RNVC: 9
1005009927291: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-051-1558
Rear Fixed Scoop

000511558
175F529: RNCC: 3 | RNVC: 2
1005PL0960898: RNCC: 6 | RNVC: 9

11 May 1967

1005-00-066-2786
Elevation Scale

000662786
11686738: RNCC: 3 | RNVC: 2
1005000662786: RNCC: 6 | RNVC: 9

29 Jun 1967

1005-00-084-8435
Front Sight

000848435
7791445: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-056-5607
Cylinder Bl Bearing

000565607
322510: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-130-1262
Exit Unit Housing

001301262
175F845: RNCC: 3 | RNVC: 2
175F845: RNCC: 5 | RNVC: 2

4 Dec 1968

NSN 1005-00-139-5594 001395594 PLATE,STOP

1005-00-139-5594
Stop Plate

001395594
2846721: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-178-8326
Lubricator Housing

001788326
114C2969: RNCC: 3 | RNVC: 2

19 Mar 1969

1005-00-268-6421
Drive Assembly Scoop

002686421
188F894: RNCC: 3 | RNVC: 2
1005PL0693606: RNCC: 6 | RNVC: 9

18 Jul 1973

1005-00-271-1574
Gearbox Cover

002711574
117D2213: RNCC: 3 | RNVC: 2

25 Jul 1973

1005-00-275-5625
Ammunition Cartridge Guide

002755625
139C6418: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-279-0532
Pin Plug Assembly

002790532
602912: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0546
Pin Plug Assembly

002790546
602464: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-6326
Chute End Assembly

002796326
1311C14222-4: RNCC: 3 | RNVC: 2
117D2204-1: RNCC: 7 | RNVC: 2

12 Aug 1973

1005-00-303-0225
Ammunition Chute

003030225
95723: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-336-0225
Vci Treated Bore Tube

003360225
7266299-9: RNCC: 3 | RNVC: 2
7267766: RNCC: 5 | RNVC: 9
7267766: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-349-5552
Unload Drive Gearbox Assembly

003495552
139C6541: RNCC: 3 | RNVC: 2

30 Jan 1974

1005-00-380-8962
Clamp Assembly

003808962
439946-9: RNCC: 3 | RNVC: 2
439946PC9: RNCC: 5 | RNVC: 9
439946-9: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-449-3612
Spool And Sleeve Su

004493612
359599: RNCC: 3 | RNVC: 2

8 May 1970

1005-00-450-7297
Adjusting Block

004507297
116C3898: RNCC: 3 | RNVC: 2
DL2-1-313V: RNCC: 5 | RNVC: 2

17 Dec 1969

1005-00-491-5481
Bearing Retainer

004915481
11838545: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-491-5469
Feeder Stripper

004915469
11838520: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-490-1538
Aft Fairing Assembly

004901538
204R341-60: RNCC: 3 | RNVC: 2

19 Sep 1969

1005-00-501-3503
Barrel Carrier Bolt

005013503
5013503: RNCC: 3 | RNVC: 2
A10210: RNCC: 5 | RNVC: 2
1005PL0961165: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-550-4059
Mounting Bracket

005504059
5504059: RNCC: 3 | RNVC: 2
5504059: RNCC: 3 | RNVC: 9
A10166: RNCC: 5 | RNVC: 2
201010619: RNCC: 5 | RNVC: 2
5504059: RNCC: 5 | RNVC: 9
1005-550-4059: RNCC: 6 | RNVC: 9
1005005504059: RNCC: 6 | RNVC: 9
5504059: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-550-4081
Sub Assembly Cover

005504081
5504081: RNCC: 3 | RNVC: 2
201030300: RNCC: 5 | RNVC: 2
A10562: RNCC: 5 | RNVC: 2
A10562S: RNCC: 5 | RNVC: 2
5504081: RNCC: 5 | RNVC: 2
5504081: RNCC: 5 | RNVC: 2
5504081: RNCC: 5 | RNVC: 9
5504081: RNCC: 5 | RNVC: 9
5504081: RNCC: 5 | RNVC: 9
711662809204: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-554-6001
Base

005546001
5546001: RNCC: 3 | RNVC: 2
5546001: RNCC: 3 | RNVC: 9
5546001: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-556-4063
Pistol Grip

005564063
5564063: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-550-6573
Small Arms Cleaning Rod Case

005506573
5506573: RNCC: 3 | RNVC: 2
711625001701: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-558-5202
Gearbox Housing

005585202
198F210: RNCC: 3 | RNVC: 2
198F210: RNCC: 5 | RNVC: 2
198F210: RNCC: 5 | RNVC: 2

11 Nov 1974

1005-00-563-7165
Ammunition End Assy

005637165
905D143-1: RNCC: 1 | RNVC: 2
8437048-1: RNCC: 3 | RNVC: 2
11626-2: RNCC: 3 | RNVC: 2
1005-563-7165: RNCC: 6 | RNVC: 9
1005005637165: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-558-5437
Transfer Assembly Housing

005585437
198F226: RNCC: 3 | RNVC: 2

11 Nov 1974

1005-00-570-3583
Drum Housing Subassembly

005703583
798E269: RNCC: 3 | RNVC: 2
798E269: RNCC: 5 | RNVC: 9
798E269: RNCC: 5 | RNVC: 9
798E269: RNCC: 5 | RNVC: 9
BP19407: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3693
Gun Muzzle Lock

005703693
201F153: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3714
Aft Scoop Guide

005703714
198F267: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3741
Drive Assembly Pin

005703741
167C1008: RNCC: 3 | RNVC: 2

21 Dec 1983

1005-00-587-6988
Trigger Guard

005876988
7790990: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-597-1201
Compression Helical Spring

005971201
7313068: RNCC: 3 | RNVC: 2
A10334: RNCC: 5 | RNVC: 2
201010018: RNCC: 5 | RNVC: 2
5360PL0947906: RNCC: 6 | RNVC: 9
5360005971201: RNCC: 6 | RNVC: 9
1005005971201: RNCC: 6 | RNVC: 9
10057313068: RNCC: 6 | RNVC: 9
53605971201: RNCC: 6 | RNVC: 9
75F6096: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-614-7409
Small Arms Cleaning Rod Swab Holder Section

006147409
6147409: RNCC: 3 | RNVC: 2
RTI-1601: RNCC: 5 | RNVC: 2
1005-614-7409: RNCC: 6 | RNVC: 9
1005006147409: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-628-0254
Link C Adapter Assy

006280254
7265620A: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-658-3213
Tompion

006583213
1810797: RNCC: 3 | RNVC: 2
1810797: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-701-2731
Control Handle Manual

007012731
7012731: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-701-2747
Pintle Socket Cap

007012747
7012747: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-699-9928
Rotor Stop

006999928
309A267P1: RNCC: 3 | RNVC: 9
7268719: RNCC: 5 | RNVC: 1
7268719: RNCC: 5 | RNVC: 2
1005-699-9928: RNCC: 6 | RNVC: 9
1005006999928: RNCC: 6 | RNVC: 9
1005PL0960384: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-718-4339
Left Tractor E Cam

007184339
7184339: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-722-5087
Small Arms Cleaning Brush

007225087
7225087: RNCC: 3 | RNVC: 2
7225087: RNCC: 3 | RNVC: 9
7225087: RNCC: 5 | RNVC: 9
10104432: RNCC: 6 | RNVC: 9
1005007225087: RNCC: 6 | RNVC: 9
1005PL0717668: RNCC: 6 | RNVC: 9
1005-722-5087: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-726-6131
Machine Gun Barrel

007266131
7266131: RNCC: 3 | RNVC: 2
A20533: RNCC: 5 | RNVC: 2
A20312: RNCC: 5 | RNVC: 2
A20313: RNCC: 5 | RNVC: 2
1005PL1557660: RNCC: 6 | RNVC: 9
1005007266131: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-869-2646
Control Unit Plug

008692646
MC10842: RNCC: 3 | RNVC: 2
MC10842: RNCC: 5 | RNVC: 9

23 Oct 1967

1005-00-919-3919
Barr Clamp Assembly

009193919
65D9813: RNCC: 3 | RNVC: 2
65D9813: RNCC: 5 | RNVC: 2
65D9813: RNCC: 5 | RNVC: 9
65D9813: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-919-3916
Gun Guide Bar

009193916
65F9809: RNCC: 3 | RNVC: 2
65F9809: RNCC: 5 | RNVC: 1
65F9809: RNCC: 5 | RNVC: 2
65F9809: RNCC: 5 | RNVC: 2
65F9809: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-937-1390
Firing Pin Retainer

009371390
8436640: RNCC: 3 | RNVC: 2

16 Nov 1966

1005-01-003-5476
Flat Spring

010035476
12003052: RNCC: 3 | RNVC: 2
A20593: RNCC: 5 | RNVC: 2
A20953: RNCC: 5 | RNVC: 2
5360PL0947949: RNCC: 6 | RNVC: 9
5360010035476: RNCC: 6 | RNVC: 9

30 Apr 1975

1005-01-007-7187
Ammunition Inner Drum

010077187
201F817: RNCC: 3 | RNVC: 2

9 Aug 1975

1005-01-004-8417
Chute Box End

010048417
201F700-2: RNCC: 1 | RNVC: 2
1321C17565: RNCC: 3 | RNVC: 2

15 Jun 1975

1005-00-726-5110
Sear

007265110
7265110: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-726-5220
Trunnion Block Shim

007265220
7265220: RNCC: 3 | RNVC: 2
6008951-5: RNCC: 5 | RNVC: 2
7265220: RNCC: 5 | RNVC: 9
6008951-5: RNCC: 5 | RNVC: 9
6008951: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-766-0915
Small Arms Cleaning Brush

007660915
7790737: RNCC: 3 | RNVC: 2
201100105: RNCC: 5 | RNVC: 2
RTI-1604: RNCC: 5 | RNVC: 2
1005007660915: RNCC: 6 | RNVC: 9
1005-766-0915: RNCC: 6 | RNVC: 9
1005PL0904003: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-00-806-0058
Clamp

008060058
7269760: RNCC: 3 | RNVC: 2
4470C788SH: RNCC: 5 | RNVC: 2
4470C788SH: RNCC: 5 | RNVC: 9
4470C788SH: RNCC: 5 | RNVC: 9
5342PL1337508: RNCC: 6 | RNVC: 9

15 Apr 1968

1005-00-820-8205
Grip Adapter

008208205
18634: RNCC: 3 | RNVC: 2
F18634: RNCC: 5 | RNVC: 1
F18634: RNCC: 5 | RNVC: 2

29 Mar 1968

1005-00-861-4684
Ammunition Handling Sprocket

008614684
66F12698: RNCC: 3 | RNVC: 2
175F759: RNCC: 5 | RNVC: 2
66F12698: RNCC: 5 | RNVC: 9

9 Oct 1967

1005-00-893-8249
Exit Unit Ass Guide

008938249
905D349: RNCC: 3 | RNVC: 2

23 Jan 1967

1005-00-893-8293
Exit Unit Ass Guide

008938293
175F513: RNCC: 3 | RNVC: 2

23 Jan 1967

1005-00-893-8231
Scoop Shaft Assy

008938231
114C2868: RNCC: 3 | RNVC: 2
114C286B: RNCC: 5 | RNVC: 2

23 Jan 1967

1005-00-901-1693
Link Guide Plunger

009011693
7790817: RNCC: 3 | RNVC: 2

8 Feb 1967

1005-00-946-1866
Fe Adapter Assembly

009461866
1310C5677-1: RNCC: 3 | RNVC: 2
C9865-1: RNCC: 5 | RNVC: 9

7 Mar 1966

1005-00-999-8818
Cartridge Extractor

009998818
F93712: RNCC: 3 | RNVC: 2
93712: RNCC: 3 | RNVC: 9
14669: RNCC: 5 | RNVC: 9

30 Mar 1966

1005-01-003-7156
Ammunition Chute

010037156
201F699-1: RNCC: 1 | RNVC: 2
1221C17543: RNCC: 3 | RNVC: 2

3 May 1975

1005-00-043-1168
Scoop Shaft Assy

000431168
116C3167: RNCC: 3 | RNVC: 9
1005PL0960487: RNCC: 6 | RNVC: 9

15 May 1968

1005-00-102-7976
Post And Insert Assembly

001027976
135B6146: RNCC: 3 | RNVC: 2

31 May 1968

1005-00-165-8066
Rear Sight

001658066
2586420: RNCC: 3 | RNVC: 2

28 Jan 1972

1005-00-177-4524
Rear Trigger Bar Stop

001774524
7312025: RNCC: 3 | RNVC: 2
7312025: RNCC: 3 | RNVC: 9

8 Dec 1971

1005-00-246-9974
Junction Block Asse

002469974
8436661: RNCC: 3 | RNVC: 2
8436661: RNCC: 5 | RNVC: 9

28 Dec 1971

1005-00-250-0806
Gun Muzzle Bearing Retainer

002500806
68A732028-2007: RNCC: 3 | RNVC: 2

13 Jun 1973

1005-00-276-7831
Decel Sprocket Assembly

002767831
139C6533: RNCC: 3 | RNVC: 2
139C6533: RNCC: 5 | RNVC: 2
139C6533: RNCC: 5 | RNVC: 2

8 Aug 1973

1005-00-279-0575
Aft Transmission Housing

002790575
176F488: RNCC: 3 | RNVC: 2
176F488: RNCC: 5 | RNVC: 2
176F488: RNCC: 5 | RNVC: 2

8 Aug 1973

1005-00-336-8608
Rear Sight Leaf

003368608
7267936: RNCC: 3 | RNVC: 2
A10581: RNCC: 5 | RNVC: 2
201010200: RNCC: 5 | RNVC: 2
A10580: RNCC: 5 | RNVC: 2
7267936: RNCC: 5 | RNVC: 9
1005PL1719044: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-437-4725
Action Bar Lock

004374725
F18849: RNCC: 3 | RNVC: 2
F18849: RNCC: 5 | RNVC: 1
F18849: RNCC: 5 | RNVC: 2
18849: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-403-0964
Small Arms Sling Swivel

004030964
8448652: RNCC: 3 | RNVC: 2
62737: RNCC: 5 | RNVC: 2
CF62737: RNCC: 5 | RNVC: 2
8448652: RNCC: 5 | RNVC: 2
711419706905: RNCC: 5 | RNVC: 9
62662: RNCC: 5 | RNVC: 9
1005004030964: RNCC: 6 | RNVC: 9

5 Jun 1970

1005-00-445-9910
Barrel Latch Block

004459910
7790985: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-491-5464
Clip-Chuting

004915464
11838511: RNCC: 3 | RNVC: 2
11838511: RNCC: C | RNVC: 1

6 Jun 1969

1005-00-494-6602
Small Arms Cleaning Brush

004946602
8448462: RNCC: 3 | RNVC: 2
01VS3 IP316: RNCC: 5 | RNVC: 1
RTI-1480: RNCC: 5 | RNVC: 2
SP94419: RNCC: 5 | RNVC: 9
711419705610: RNCC: 5 | RNVC: 9
1005PL0911286: RNCC: 6 | RNVC: 9
1005004946602: RNCC: 6 | RNVC: 9

18 Feb 1970

1005-00-500-9528
Oil Bu Relief Valve

005009528
5009528: RNCC: 3 | RNVC: 9
A5009528: RNCC: 5 | RNVC: 9
5009528: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-501-3691
Compression Helical

005013691
5013691: RNCC: 3 | RNVC: 2
201050014: RNCC: 5 | RNVC: 2
A10476: RNCC: 5 | RNVC: 2
5360PL0947870: RNCC: 6 | RNVC: 9
1005005013691: RNCC: 6 | RNVC: 9
5310-501-3691: RNCC: 6 | RNVC: 9
75F6121: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-531-3202
Ball Mount

005313202
139C7802: RNCC: 3 | RNVC: 2

11 Sep 1974

1005-00-525-2217
Booster Actuator

005252217
163B5905: RNCC: 3 | RNVC: 2

25 Aug 1974

1005-00-550-4094
Buffer Tube Sleeve

005504094
5504094: RNCC: 1 | RNVC: 2
5504094: RNCC: 3 | RNVC: 2
3662003950: RNCC: 5 | RNVC: 2
5504094: RNCC: 5 | RNVC: 2
5504094: RNCC: 5 | RNVC: 2
5504094: RNCC: 5 | RNVC: 2
1005PL0962031: RNCC: 6 | RNVC: 9
10093081: RNCC: 6 | RNVC: 9
1005005504094: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3735
Purge Adapter Assembly

005703735
188F982: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3843
Gun Retaining Plate

005703843
114C3089: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-572-3204
Middle Gun System Track

005723204
201F117: RNCC: 3 | RNVC: 2

4 Dec 1974

1005-00-600-9712
Breech Lo Depressor

006009712
6009712: RNCC: 3 | RNVC: 2
201040202: RNCC: 5 | RNVC: 2
A10277: RNCC: 5 | RNVC: 2
3662005681: RNCC: 5 | RNVC: 2
10092958: RNCC: 6 | RNVC: 9
1005006009712: RNCC: 6 | RNVC: 9
1005PL1649058: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-608-5111
Cheek Pad Assembly

006085111
7269138: RNCC: 3 | RNVC: 2
1005006085111: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-610-8828
Small Arms Cleaning Brush

006108828
6108828: RNCC: 3 | RNVC: 2
6108828: RNCC: 5 | RNVC: 2
1005006108828: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-614-7817
Mounting Bracket

006147817
6147817: RNCC: 3 | RNVC: 2
201010800: RNCC: 5 | RNVC: 2
A10199: RNCC: 5 | RNVC: 2
A10245: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-629-7412
Machine Gun Equilibrator Spring Case

006297412
6297412: RNCC: 3 | RNVC: 2
1005-629-7412: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-653-5477
Back Plate Assembly

006535477
6535477: RNCC: 3 | RNVC: 9
201060300: RNCC: 5 | RNVC: 2
A10453: RNCC: 5 | RNVC: 2
6535477: RNCC: 5 | RNVC: 2
1005-653-5477: RNCC: 6 | RNVC: 9
1005006535477: RNCC: 6 | RNVC: 9
75F200: RNCC: 8 | RNVC: 2
6535477: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-716-2702
Small Arms Cleaning Brush

007162702
7162702: RNCC: 3 | RNVC: 2
3662090270: RNCC: 5 | RNVC: 2
RTI-1346: RNCC: 5 | RNVC: 2
A10620: RNCC: 5 | RNVC: 2
7162702: RNCC: 5 | RNVC: 9
1005PL0903673: RNCC: 6 | RNVC: 9
1005-716-2702: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-01-695-3874
Small Arms Maintenance Tool Case

016953874
SMTC-18: RNCC: 3 | RNVC: 2

3 Jun 2021

1005-01-689-7915
Rifle Tool Kit With Sight

016897915
51000276: RNCC: 3 | RNVC: 2

10 Jul 2020

1005-01-664-9753
Loaded Indicator Assembl Chamber

016649753
13067102: RNCC: 1 | RNVC: 2
1302052M17: RNCC: 3 | RNVC: 2
13067102: RNCC: 5 | RNVC: 2

13 Jul 2017

1005-01-665-4335
Bench Block Armorer

016654335
13068911: RNCC: 1 | RNVC: 2
1301875M17: RNCC: 3 | RNVC: 2
13068911: RNCC: 5 | RNVC: 2

31 Jul 2017

1005-01-601-8485
Machine Gun Bipod

016018485
49505: RNCC: 3 | RNVC: 2

26 Jan 2012

1005-01-589-7008
Gun Hand Guard

015897008
50233617: RNCC: 3 | RNVC: 2
233617: RNCC: 5 | RNVC: 9

2 Nov 2010

1005-01-586-4767
Rifle Mount

015864767
13033540: RNCC: 3 | RNVC: 2
DRIVERS01: RNCC: 5 | RNVC: 9

30 Jun 2010

1005-01-560-2741
Gun Parts Kit

015602741
TLCNVU862: RNCC: 3 | RNVC: 2
10206620: RNCC: 5 | RNVC: 9

23 Jan 2008

1005-01-560-2749
Gun Parts Kit

015602749
TLCNVU863: RNCC: 3 | RNVC: 2
10089719: RNCC: 5 | RNVC: 9

23 Jan 2008

1005-01-558-9820
Machine Gun Barrel

015589820
11838962: RNCC: 1 | RNVC: 2
11838962: RNCC: 3 | RNVC: 2
11838962: RNCC: 3 | RNVC: 2
11838962: RNCC: 3 | RNVC: 2
11838962: RNCC: 5 | RNVC: 9
GI-134-1968: RNCC: 5 | RNVC: 9

30 Nov 2007

1005-01-552-1851
Ejection Chute Section

015521851
TYUW17450A: RNCC: 3 | RNVC: 2
8H-A31753: RNCC: D | RNVC: 9

7 Jun 2007

1005-01-552-1205
Ammunition Chute Section

015521205
TYUW17452A: RNCC: 3 | RNVC: 2
8H-A31525: RNCC: D | RNVC: 9

6 Jun 2007

1005-01-548-2058
Gun Parts Kit

015482058
TLCNVX880: RNCC: 3 | RNVC: 2
10018580: RNCC: 5 | RNVC: 9

13 Feb 2007

1005-01-522-4817
7.6 Barrel Assembly

015224817
13008220: RNCC: 3 | RNVC: 2

30 Jul 2004

1005-01-517-1749
Traversin Mechanism

015171749
13001738: RNCC: 3 | RNVC: 2

30 Jan 2004

1005-01-507-1176
Ejection Chute Section

015071176
1698AS225: RNCC: 3 | RNVC: 2

19 Apr 2003

1005-01-493-6047
Mechanical Equipment Seal Replacement Parts Kit

014936047
TLCNVX490: RNCC: 3 | RNVC: 2

10 Jan 2002

1005-01-493-6041
Mechanical Equipment Seal Replacement Parts Kit

014936041
TLCNVX488: RNCC: 3 | RNVC: 2

10 Jan 2002

1005-01-476-2504
Mount Pintle

014762504
6650749: RNCC: 3 | RNVC: 2

5 Jul 2000

1005-01-456-9098
Machine Gun Cover Assembly

014569098
12524584: RNCC: 3 | RNVC: 2

1 Jul 1998

1005-01-454-1629
Rifle Barrel

014541629
12598107: RNCC: 3 | RNVC: 2
711222000207: RNCC: 6 | RNVC: 9

20 Mar 1998

1005-01-391-5096
Ammunition Transfer Unit

013915096
10048062: RNCC: 3 | RNVC: 2

13 Jun 1994

1005-01-363-1654
Loading Access Unit

013631654
10053528: RNCC: 3 | RNVC: 2
10048044: RNCC: 5 | RNVC: 9

24 Aug 1992

1005-01-322-1227
Ammunition Chute

013221227
6570796-2: RNCC: 1 | RNVC: 2
0621D28771: RNCC: 3 | RNVC: 2
6570796-2: RNCC: 5 | RNVC: 9
6570796-2: RNCC: 5 | RNVC: 9
6570796: RNCC: D | RNVC: 9

29 Jun 1990

1005-01-323-7551
Gun Mount

013237551
6086286: RNCC: 3 | RNVC: 2
6650411-6: RNCC: 5 | RNVC: 1
MK16-MOD8: RNCC: 5 | RNVC: 1
NAV-MK16-MOD8: RNCC: 5 | RNVC: 1
6086286: RNCC: 5 | RNVC: 2
6086286: RNCC: 5 | RNVC: 9

5 Aug 1990

1005-01-317-9147
Ejection Chute

013179147
12295636-9: RNCC: 3 | RNVC: 2

8 Apr 1990

1005-01-215-8183
Bolt Carrier

012158183
387-3242-3: RNCC: 3 | RNVC: 2
387-3242-3: RNCC: 3 | RNVC: 9
387-3242-3: RNCC: 5 | RNVC: 9
387-3242-3: RNCC: C | RNVC: 1

1 Sep 1985

1005-01-191-1011
Modified Screw

011911011
H661-AS756: RNCC: 3 | RNVC: 2

6 Oct 1984

1005-01-171-8316
Gun Shield Cover

011718316
12316966: RNCC: 3 | RNVC: 2
12316966: RNCC: 5 | RNVC: 2
12316966: RNCC: 5 | RNVC: 2
12316966: RNCC: 5 | RNVC: 2
12316966: RNCC: 5 | RNVC: 9

15 Feb 1984

1005-01-142-8146
30 Mm Barrel Set

011428146
512L735: RNCC: 3 | RNVC: 2
211F954: RNCC: 5 | RNVC: 9

20 Nov 1982

1005-01-126-7797
Gun Cover

011267797
12295188: RNCC: 3 | RNVC: 2
12295188: RNCC: 5 | RNVC: 9
12295188: RNCC: 5 | RNVC: 9

17 Feb 1982

1005-01-121-2390
Small Arms Cleaning Brush

011212390
12524013: RNCC: 3 | RNVC: 2
465-4113: RNCC: 5 | RNVC: 2
10511052: RNCC: 5 | RNVC: 2
465-4113: RNCC: 5 | RNVC: 9

3 Nov 1981

1005-01-120-0447
Handle Assembly

011200447
12524476: RNCC: 3 | RNVC: 2
12524476-B: RNCC: 5 | RNVC: 2
465-4476: RNCC: 5 | RNVC: 9
465-4476: RNCC: C | RNVC: 1

9 Oct 1981

1005-01-116-1470
Lanyard Pin Assembly

011161470
167C2918: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-089-7693
Ammunition Handling Sprocket

010897693
12524394: RNCC: 3 | RNVC: 2
465-4394: RNCC: 5 | RNVC: 2
12524394: RNCC: 5 | RNVC: 2
2 0028-453: RNCC: 5 | RNVC: 2
2 0028-453: RNCC: 5 | RNVC: 9
465-4394: RNCC: 5 | RNVC: 9
10125810: RNCC: 6 | RNVC: 9
3020PL1495437: RNCC: 6 | RNVC: 9
12524394: RNCC: 7 | RNVC: 2

7 Feb 1980

1005-01-088-4400
Index Drive Cover Assembly

010884400
12524260: RNCC: 3 | RNVC: 2
465-4260: RNCC: 5 | RNVC: 9
465-4260: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-079-7584
Guide Bar

010797584
12007560: RNCC: 3 | RNVC: 2
G93000-26: RNCC: 5 | RNVC: 2
12007560: RNCC: 5 | RNVC: 9

12 Jul 1979

1005-01-079-8452
Shaft Seal

010798452
AG772: RNCC: 3 | RNVC: 2

15 Jul 1979

1005-01-055-6480
Forward Feeder Sprocket

010556480
105D3942: RNCC: 3 | RNVC: 2
105D3942: RNCC: 5 | RNVC: 2
1005PL0697784: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-041-9262
Horizontal Breech Insulator

010419262
11691420: RNCC: 3 | RNVC: 2
11691420: RNCC: 5 | RNVC: 2
11691420: RNCC: 5 | RNVC: 2
11691420: RNCC: 5 | RNVC: 9
1005PL0959939: RNCC: 6 | RNVC: 9

4 Jun 1977

1005-00-919-3918
Bolt Track

009193918
65C9749: RNCC: 3 | RNVC: 2
65C9749: RNCC: 5 | RNVC: 2
65C9749: RNCC: 5 | RNVC: 9

1 Jan 1960

1005-00-787-9802
Automatic Gun Barrel

007879802
7790801: RNCC: 3 | RNVC: 2
7790801: RNCC: 3 | RNVC: 9
7790801: RNCC: 5 | RNVC: 1
7790801: RNCC: 5 | RNVC: 2
10104433: RNCC: 6 | RNVC: 9
1005007879802: RNCC: 6 | RNVC: 9
1005PL0958363: RNCC: 6 | RNVC: 9
7790801: RNCC: C | RNVC: 1

1 Jan 1962

1005-00-600-8939
Cover Plate

006008939
6008939: RNCC: 3 | RNVC: 2
A20202: RNCC: 5 | RNVC: 2
1005006008939: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-550-3941
Recoil Buffer Assembly

005503941
5503941: RNCC: 3 | RNVC: 2
ARMYDWG5503941: RNCC: 5 | RNVC: 2
5503941: RNCC: 5 | RNVC: 9
1005005503941: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3737
Ammunition Conveyor Element

005703737
189F986-1: RNCC: 3 | RNVC: 2
352258909283: RNCC: 5 | RNVC: 2
189F986-1: RNCC: 5 | RNVC: 9
189F986: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-572-3205
Rear Gun Track

005723205
201F118: RNCC: 3 | RNVC: 2
201F118: RNCC: 5 | RNVC: 2

4 Dec 1974

1005-00-570-3598
Drum Universal Assembly

005703598
105D3489: RNCC: 1 | RNVC: 2
28PF336: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3711
Gun Bar Guide

005703711
198F255: RNCC: 3 | RNVC: 2
198F255: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-501-3588
Gun Cover

005013588
5013588: RNCC: 3 | RNVC: 2
1005005013588: RNCC: 6 | RNVC: 9
5013588: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-269-5243
Ammunition Drum Assembly Partition

002695243
175F142: RNCC: 3 | RNVC: 2
1005PL0693662: RNCC: 6 | RNVC: 9

20 Jul 1973

1005-00-078-0524
Muzzle * Clamp Plate

000780524
11838640: RNCC: 3 | RNVC: 2
581911838640: RNCC: 5 | RNVC: 2

24 Nov 1971

NSN 1005-01-170-8383 011708383 DRIVE UNIT,HYDRAULIC

1005-01-170-8383
Hydraulic Drive Unit

011708383
211F359-2: RNCC: 1 | RNVC: 3
CMF3-100-1A: RNCC: 3 | RNVC: 3
10104449: RNCC: 6 | RNVC: 9

29 Jan 1984

NSN 1005-01-604-1550 016041550 MOUNT,SIGHT,SMALL ARMS

1005-01-604-1550
Small Arms Sight Mount

016041550
404058: RNCC: 3 | RNVC: 2

28 Mar 2012

1005-01-477-1696
Trigger Guard

014771696
H5000-3-188-340: RNCC: 3 | RNVC: 2

1 Aug 2000

1005-01-116-1469
Lanyard Pin Assembly

011161469
167C2917: RNCC: 3 | RNVC: 2
167C2917: RNCC: 5 | RNVC: 2

21 Jul 1981

1005-01-691-1765
Small Arms Fire Control Selector

016911765
13101698: RNCC: 1 | RNVC: 2
BT-36751: RNCC: 3 | RNVC: 2

24 Sep 2020

1005-01-691-2066
Trigger

016912066
13101695: RNCC: 1 | RNVC: 2
BT-36376: RNCC: 3 | RNVC: 2

25 Sep 2020

1005-01-690-3814
Shoulder Gun Stock Butt Plate

016903814
18328: RNCC: 3 | RNVC: 2

10 Aug 2020

1005-01-687-6984
Pintle Assembly

016876984
3392AS476: RNCC: 3 | RNVC: 2

14 Apr 2020

1005-01-679-8746
Gun Maintenance Kit

016798746
8305883: RNCC: 3 | RNVC: 2
8305883: RNCC: 5 | RNVC: 2

12 Apr 2019

1005-01-687-7333
Arm End Assembly

016877333
3392AS473: RNCC: 3 | RNVC: 2

15 Apr 2020

1005-01-656-0845
Gun Mount Assembly

016560845
3392AS2625: RNCC: 3 | RNVC: 2

16 Jun 2016

1005-01-667-2979
Flat Spring

016672979
12021: RNCC: 3 | RNVC: 2

11 Oct 2017

1005-01-627-0308
Mk48 Mod 6 Mount

016270308
8347817: RNCC: 3 | RNVC: 2

30 Mar 2014

1005-01-630-6498
Hand Assy Clen Rod

016306498
465-5476-3: RNCC: 3 | RNVC: 2
465-5476-3: RNCC: 3 | RNVC: 9

13 Aug 2014

1005-01-628-5011
Shoulder Gun Stock Butt Plate

016285011
98304: RNCC: 3 | RNVC: 2

29 May 2014

1005-01-603-3175
Gun Component Retainer

016033175
11743P: RNCC: 3 | RNVC: 2

28 Feb 2012

1005-01-607-6958
Empty Cartridge Bag

016076958
13028029: RNCC: 1 | RNVC: 2
TO-1812.01: RNCC: 3 | RNVC: 2

12 Jun 2012

1005-01-597-6968
Spec Feed Sel Body

015976968
465-5291: RNCC: 3 | RNVC: 2
465-5291: RNCC: 3 | RNVC: 9
2 0132-707: RNCC: 5 | RNVC: 2
2 0132-707: RNCC: 5 | RNVC: 9

20 Jun 2011

1005-01-587-6072
Ammunition Feed Pawl

015876072
10052655: RNCC: 3 | RNVC: 2

12 Aug 2010

1005-01-591-3118
Endlink

015913118
S50C1240S05: RNCC: 3 | RNVC: 2

20 Jan 2011

1005-01-579-3562
Ammunition Chute Support

015793562
3392AS904: RNCC: 3 | RNVC: 2

9 Nov 2009

1005-01-570-2916
Magazine Catch Detent

015702916
3392AS1009: RNCC: 3 | RNVC: 2
3392AS1009: RNCC: 5 | RNVC: 2

22 Dec 2008

1005-01-570-5911
Machine Gun Breech Lock

015705911
3392AS794: RNCC: 3 | RNVC: 2

7 Jan 2009

1005-01-567-3012
Ammunition Box Magazine

015673012
12976627-60: RNCC: 3 | RNVC: 2

23 Sep 2008

1005-01-554-4882
Machine Gun Cradle Yoke

015544882
DMG0001: RNCC: 3 | RNVC: 2
589902015000: RNCC: 5 | RNVC: 2

10 Aug 2007

1005-01-533-9739
Machine Gun Mount

015339739
8166504: RNCC: 3 | RNVC: 2
8166504: RNCC: 3 | RNVC: 2
8166504 INHOUSE CRANE: RNCC: 3 | RNVC: 2

3 Oct 2005

1005-01-521-6159
Recoil Booster

015216159
3392AS2495: RNCC: 3 | RNVC: 2
7520953: RNCC: 3 | RNVC: 2
3392AS2495: RNCC: 5 | RNVC: 2

27 Jun 2004

1005-01-516-1554
Gun Parts Kit

015161554
RACA015161554: RNCC: 3 | RNVC: 2
201123304: RNCC: 5 | RNVC: 2
201123304: RNCC: 5 | RNVC: 2
201123304: RNCC: 5 | RNVC: 2
TLCALQ730: RNCC: 5 | RNVC: 9
TLCAFQ730: RNCC: 5 | RNVC: 9
200317980-215: RNCC: D | RNVC: 9

22 Dec 2003

Load More Results