What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 72 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 72 of 125

1005-01-114-0115
Gun Operating Rod Assembly

011140115
12524460: RNCC: 3 | RNVC: 2
465-4460: RNCC: 5 | RNVC: 2
465-4460: RNCC: 5 | RNVC: 9

7 Jun 1981

1005-01-114-1100
Handstation Mount

011141100
12292572: RNCC: 3 | RNVC: 2

10 Jun 1981

1005-01-115-0926
Manual Support

011150926
12292415: RNCC: 3 | RNVC: 2

27 Jun 1981

1005-01-114-3081
Manual Hub Assembly

011143081
12524209: RNCC: 3 | RNVC: 2
12524209: RNCC: 5 | RNVC: 2
465-4209: RNCC: 5 | RNVC: 9
10125969: RNCC: 6 | RNVC: 9
465-4209: RNCC: C | RNVC: 1

16 Jun 1981

1005-01-116-1451
Ammunition Handling Sprocket

011161451
142D5143: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1453
Bearing Retainer

011161453
142D5621: RNCC: 3 | RNVC: 2
10162744: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1495
Nose Cartridge Guide

011161495
209F490: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1494
Entrance Unit Housing Assembly

011161494
209F488: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-119-7254
Recoil Spring Clamp Assembly

011197254
12524021: RNCC: 3 | RNVC: 2
2 0018-397: RNCC: 5 | RNVC: 9
10077795: RNCC: 6 | RNVC: 9

1 Oct 1981

1005-01-119-7253
Rocker

011197253
12524466: RNCC: 3 | RNVC: 2
12524466: RNCC: 5 | RNVC: 2
465-4466: RNCC: 5 | RNVC: 9
10126893: RNCC: 6 | RNVC: 9
465-4466: RNCC: C | RNVC: 1

1 Oct 1981

1005-01-121-7303
Cable Assembly

011217303
211F547-2: RNCC: 3 | RNVC: 2
MC15667: RNCC: 5 | RNVC: 2
MC15667: RNCC: 5 | RNVC: 9

7 Nov 1981

1005-01-134-3625
Front Sight Post

011343625
9349056: RNCC: 3 | RNVC: 2
64507: RNCC: 5 | RNVC: 2
711419702407: RNCC: 6 | RNVC: 9
1005011343625: RNCC: 6 | RNVC: 9

3 Jul 1982

1005-01-138-8128
Poppet Guide

011388128
MC14174: RNCC: 3 | RNVC: 2
MC14174: RNCC: 5 | RNVC: 9

21 Sep 1982

1005-01-148-4805
Rifle Grip

011484805
9349127: RNCC: 3 | RNVC: 2
711419705907: RNCC: 5 | RNVC: 9
1005011484805: RNCC: 6 | RNVC: 9

7 Mar 1983

1005-01-150-6529
Release Lever

011506529
132D1760-2: RNCC: 3 | RNVC: 2
132D1760: RNCC: E | RNVC: 8

7 Apr 1983

1005-01-150-5803
Ammunition Chute Assembly

011505803
S257009-151: RNCC: 3 | RNVC: 2
257009-151: RNCC: 5 | RNVC: 9

6 Apr 1983

1005-01-167-1153
Shaft Rotor

011671153
502320-01: RNCC: 3 | RNVC: 2
502320-01: RNCC: 3 | RNVC: 9
502320-01: RNCC: 5 | RNVC: 2
502320-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-167-1158
Plate Assembly Roto

011671158
502310-01: RNCC: 3 | RNVC: 9
502310-01: RNCC: 5 | RNVC: 1
502310-01: RNCC: 5 | RNVC: 2
502310-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1195
Weapons Enclosu Bag

011671195
101339-01: RNCC: 3 | RNVC: 2
101339-01: RNCC: 3 | RNVC: 9
WB-3365RG: RNCC: 5 | RNVC: 2
101339-01: RNCC: 5 | RNVC: 2
WB-3365RG: RNCC: 5 | RNVC: 9
101339-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1180
Arm Pivot

011671180
508145-01: RNCC: 3 | RNVC: 2

22 Nov 1983

1005-01-167-1211
Arm

011671211
502450-01: RNCC: 3 | RNVC: 9
502450-1: RNCC: 5 | RNVC: 2
502450-01: RNCC: 5 | RNVC: 2
502450-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1207
Hatch Bumper Ring

011671207
502431-01: RNCC: 3 | RNVC: 2
502431-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1279
Cover 25Mm Box

011671279
508009-01: RNCC: 3 | RNVC: 2

22 Nov 1983

1005-01-167-1290
Link Eject Chute He

011671290
508233-01: RNCC: 3 | RNVC: 9
508233-01: RNCC: 5 | RNVC: 1
508233-01: RNCC: 5 | RNVC: 2
508233-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-182-0632
Upper Slider

011820632
HM025-693-1: RNCC: 1 | RNVC: 2
014205-1: RNCC: 3 | RNVC: 2
014205-1: RNCC: 3 | RNVC: 9

19 Jun 1984

1005-01-182-3703
Carrier Drive Housing Assembly

011823703
014404-1: RNCC: 3 | RNVC: 2
014404-1: RNCC: 5 | RNVC: 9

23 Jun 1984

1005-01-051-1702
Front Sight

010511702
18673: RNCC: 3 | RNVC: 2

25 Nov 1977

1005-01-053-9253
Turnaround Aft Housing

010539253
205F475: RNCC: 3 | RNVC: 2

13 Jan 1978

1005-01-054-0014
Rear Unload Gate

010540014
105D3890: RNCC: 3 | RNVC: 2
1005PL0695724: RNCC: 6 | RNVC: 9

13 Jan 1978

1005-01-055-6472
Ammunition Cartridge Guide

010556472
201F478: RNCC: 3 | RNVC: 2
201F478: RNCC: 5 | RNVC: 2
1005PL0697367: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-055-6474
Exit Unit Housing

010556474
209F440: RNCC: 3 | RNVC: 2
209F440: RNCC: 5 | RNVC: 2
201F809: RNCC: 5 | RNVC: 9
1005PL0697393: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-055-8978
Cupo Cushioning Pad

010558978
12277402-1: RNCC: 3 | RNVC: 2
12277402-1: RNCC: 5 | RNVC: 9

14 Feb 1978

1005-01-061-2723
Conveyor Tension Equalizer Assembly

010612723
209F659: RNCC: 3 | RNVC: 2
205F469: RNCC: 5 | RNVC: 9

15 Jun 1978

1005-01-061-3500
Orifice Filter

010613500
423703: RNCC: 3 | RNVC: 2

17 Jun 1978

1005-01-061-7578
Flexible Reinforced Hose

010617578
12002702-3: RNCC: 3 | RNVC: 2

29 Jun 1978

1005-01-076-7293
Upper Inner Guide

010767293
209F611: RNCC: 3 | RNVC: 2

10 May 1979

1005-01-088-4409
Housing Assembly Cap

010884409
12524437: RNCC: 3 | RNVC: 2
12524437: RNCC: 5 | RNVC: 2
465-4437: RNCC: 5 | RNVC: 9
10126887: RNCC: 6 | RNVC: 9
465-4437: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4410
Dampener Spring Valve

010884410
12524440: RNCC: 3 | RNVC: 2
12524440: RNCC: 5 | RNVC: 2
465-4440: RNCC: 5 | RNVC: 9
10126888: RNCC: 6 | RNVC: 9
465-4440: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-089-7788
Idler Sprocket Shaft Assembly

010897788
12524395: RNCC: 3 | RNVC: 2
12524395: RNCC: 5 | RNVC: 2
2 0040-109: RNCC: 5 | RNVC: 2
2 0040-109: RNCC: 5 | RNVC: 9
465-4395: RNCC: 5 | RNVC: 9
10126877: RNCC: 6 | RNVC: 9
1005PL1276602: RNCC: 6 | RNVC: 9
465-4395: RNCC: C | RNVC: 1

7 Feb 1980

1005-01-095-8950
Recoil Pad

010958950
5262290: RNCC: 1 | RNVC: 2
02302: RNCC: 3 | RNVC: 2
02302: RNCC: 3 | RNVC: 9
5262290: RNCC: 5 | RNVC: 9
PAC-L-BN: RNCC: 5 | RNVC: 9
PAC-L-BN: RNCC: 5 | RNVC: 9

9 Jun 1980

1005-01-102-2238
Sprocket Assembly

011022238
167C2753: RNCC: 3 | RNVC: 2

16 Oct 1980

1005-01-104-0815
Shoe Plate

011040815
MC13581: RNCC: 3 | RNVC: 2
MC13581: RNCC: 5 | RNVC: 9
10162737: RNCC: 6 | RNVC: 9

26 Nov 1980

1005-01-110-7633
Mount Cleat

011107633
12298079: RNCC: 3 | RNVC: 2

5 Apr 1981

1005-01-112-3940
Armor Bracket

011123940
12292075: RNCC: 3 | RNVC: 2

3 May 1981

1005-01-114-0051
Sight Cover Hinge

011140051
12297643: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-112-8560
Clamp Block

011128560
12292552-1: RNCC: 3 | RNVC: 2

11 May 1981

1005-01-114-0067
Ball Bearing Annular Retainer

011140067
12294637: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-115-5441
Browpad Shaft

011155441
12293877: RNCC: 3 | RNVC: 2
12293877: RNCC: 5 | RNVC: 1
12293877: RNCC: 5 | RNVC: 9

9 Jul 1981

1005-01-116-1471
Release Lever

011161471
176C1370: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1474
Muzzle Clamp Assembly

011161474
176C1538: RNCC: 3 | RNVC: 2
10104438: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-117-0164
Gear Spur Roller

011170164
12524096: RNCC: 3 | RNVC: 2
12524096: RNCC: 5 | RNVC: 2
465-4096: RNCC: 5 | RNVC: 9
10125944: RNCC: 6 | RNVC: 9
1005PL1276120: RNCC: 6 | RNVC: 9
465-4096: RNCC: C | RNVC: 1

7 Aug 1981

1005-01-119-5644
Retroreflector

011195644
12297964: RNCC: 3 | RNVC: 2
FE-RR3: RNCC: 5 | RNVC: 2

26 Sep 1981

1005-01-126-7815
Support Roller

011267815
12307592: RNCC: 3 | RNVC: 2

17 Feb 1982

1005-01-128-5466
Front Sight Base

011285466
9348441: RNCC: 3 | RNVC: 2
3617111015: RNCC: 5 | RNVC: 2

25 Mar 1982

1005-01-140-3276
Element Turnaround Guide

011403276
209F282: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3282
Actuator Lever

011403282
211F324: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-141-3813
Fitting Assembly

011413813
70751-02023-044: RNCC: 3 | RNVC: 2

27 Oct 1982

1005-01-149-8300
Hook

011498300
12316787: RNCC: 3 | RNVC: 2

27 Mar 1983

1005-01-152-3591
Front Unload Gate

011523591
142D6721: RNCC: 3 | RNVC: 2

30 Apr 1983

1005-01-154-2748
Clearing Sector Retainer Assembly

011542748
217F457: RNCC: 3 | RNVC: 2
10162743: RNCC: 6 | RNVC: 9
211F337: RNCC: E | RNVC: 8
211F931: RNCC: E | RNVC: 8

23 May 1983

1005-01-163-3710
Insulator

011633710
69-11-B544-1677: RNCC: 3 | RNVC: 2
7565952-104: RNCC: 5 | RNVC: 2
7565952: RNCC: D | RNVC: 9

2 Oct 1983

1005-01-157-3079
Photoelectric Control

011573079
12295082-5: RNCC: 3 | RNVC: 2

3 Jul 1983

1005-01-165-0511
Yoke Assembly

011650511
362557: RNCC: 3 | RNVC: 2

25 Oct 1983

1005-01-166-1942
Cover

011661942
65702: RNCC: 3 | RNVC: 2
65702: RNCC: 5 | RNVC: 9
101568: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-166-1946
Brush Block Assembl

011661946
65697-2: RNCC: 3 | RNVC: 2
65697-2: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-167-1200
Periscope Support Block

011671200
101396-01: RNCC: 3 | RNVC: 2
101396-01: RNCC: 5 | RNVC: 2
101396-01: RNCC: 5 | RNVC: 9
971005005: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1288
Ratchet

011671288
508165-01: RNCC: 3 | RNVC: 2
508165-01: RNCC: 3 | RNVC: 9
508165-01: RNCC: 5 | RNVC: 2
508165-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-4597
Blackout Frame

011674597
12307298: RNCC: 3 | RNVC: 2

29 Nov 1983

1005-01-167-5847
Elevating Me Sleeve

011675847
6195550: RNCC: 3 | RNVC: 2
6195550: RNCC: 5 | RNVC: 9
6195550: RNCC: 5 | RNVC: 9

2 Dec 1983

1005-01-167-1298
Chute Coax Feed

011671298
S-765028-101: RNCC: 3 | RNVC: 2
101457-01: RNCC: 5 | RNVC: 2
101457-01: RNCC: 5 | RNVC: 9
S-765020-101: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-169-8536
Vent Breather

011698536
M280-1: RNCC: 3 | RNVC: 2
7566270-001: RNCC: 5 | RNVC: 2

17 Jan 1984

1005-01-174-1997
Shoulder Rest Assembly

011741997
82A5027A6170: RNCC: 3 | RNVC: 2

15 Mar 1984

1005-01-182-0849
Gun Turret Guide

011820849
7-217221417: RNCC: 3 | RNVC: 2
7-217221417: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-038-2394
Mount Pintle

010382394
12006406: RNCC: 3 | RNVC: 2

1 Apr 1977

1005-01-117-9818
Rod Rocker Support

011179818
12524464: RNCC: 3 | RNVC: 2
10126891: RNCC: 6 | RNVC: 9

25 Aug 1981

1005-01-037-1890
Gun Recoil Mechanism Adapter

010371890
105D3853: RNCC: 3 | RNVC: 2
105D3993: RNCC: 5 | RNVC: 9

14 Mar 1977

1005-01-050-2736
Gun System Entrance Unit

010502736
209F439: RNCC: 3 | RNVC: 2
16VS002003-2: RNCC: 5 | RNVC: 2
1005PL0695141: RNCC: 6 | RNVC: 9

3 Nov 1977

1005-01-044-6073
Locking-Unlocking Cam

010446073
205F311: RNCC: 3 | RNVC: 2
205F311: RNCC: 5 | RNVC: 9
205F311: RNCC: 5 | RNVC: 9
205F311: RNCC: 5 | RNVC: 9

17 Jul 1977

1005-01-051-0354
Vertical Insulator

010510354
11691415: RNCC: 3 | RNVC: 2
11691415: RNCC: 5 | RNVC: 2
11691415: RNCC: 5 | RNVC: 2
1005PL0959946: RNCC: 6 | RNVC: 9

19 Nov 1977

1005-01-055-1021
Ammunition Roller

010551021
11830840: RNCC: 3 | RNVC: 2

1 Feb 1978

1005-01-055-3369
Unload Arm

010553369
105D3908: RNCC: 3 | RNVC: 2
1005PL0696332: RNCC: 6 | RNVC: 9

4 Feb 1978

1005-01-055-8979
Cupo Cushioning Pad

010558979
12277402-2: RNCC: 3 | RNVC: 2
12277402-2: RNCC: 5 | RNVC: 9

14 Feb 1978

1005-01-060-1813
Bypass Valve

010601813
425254: RNCC: 3 | RNVC: 2

15 May 1978

1005-01-076-7295
Roller Shaft

010767295
167C2616: RNCC: 3 | RNVC: 2
167C2616: RNCC: 5 | RNVC: 2

10 May 1979

1005-01-079-8465
Release Shaft

010798465
A885AE585: RNCC: 3 | RNVC: 2

15 Jul 1979

1005-01-084-9844
Extractor Spring Assembly

010849844
11828591: RNCC: 3 | RNVC: 2

28 Oct 1979

1005-01-095-0330
Handle

010950330
12292492: RNCC: 3 | RNVC: 2
12292492: RNCC: 5 | RNVC: 9

21 May 1980

1005-01-098-8117
Piston And Shoe Assembly

010988117
MC13568: RNCC: 3 | RNVC: 2
MC13568: RNCC: 5 | RNVC: 9

7 Aug 1980

1005-01-098-8121
Shaft And Bearing Assembly

010988121
MC13591: RNCC: 3 | RNVC: 2
MC13591: RNCC: 5 | RNVC: 9

7 Aug 1980

1005-01-098-8118
Wear Plate

010988118
MC13580: RNCC: 3 | RNVC: 2
MC13580: RNCC: 5 | RNVC: 9
10162745: RNCC: 6 | RNVC: 9

7 Aug 1980

1005-01-099-1746
Cable Assembly

010991746
12294239: RNCC: 3 | RNVC: 2

14 Aug 1980

1005-01-107-7464
Rotor Bearing Retainer

011077464
12294452: RNCC: 3 | RNVC: 2

12 Feb 1981

1005-01-107-9150
Machine Gun Cover Assembly

011079150
12308326: RNCC: 3 | RNVC: 2
12295572: RNCC: 5 | RNVC: 9

15 Feb 1981

1005-01-110-5551
Manual Drive Cover

011105551
12292394: RNCC: 3 | RNVC: 2

2 Apr 1981

1005-01-110-7641
Tow Launcher Armor

011107641
12295736: RNCC: 3 | RNVC: 2

5 Apr 1981

1005-01-111-5725
Traversing Drive Cover

011115725
12292410: RNCC: 3 | RNVC: 2

19 Apr 1981

1005-01-112-1625
Rotor Shield

011121625
12295652: RNCC: 3 | RNVC: 2

28 Apr 1981

1005-01-112-6278
Stiffener Plate

011126278
12292547: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-112-6280
Gyro Support

011126280
12292549: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-112-6276
Ammunition Chute Guard

011126276
12294556: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-114-0077
Ammunition Bracket

011140077
12297710: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-114-1083
Special Screw

011141083
12293669: RNCC: 3 | RNVC: 2
12293669: RNCC: 5 | RNVC: 9

10 Jun 1981

1005-01-115-9003
Blackout Frame

011159003
12307300: RNCC: 3 | RNVC: 2

16 Jul 1981

1005-01-116-1464
Scoop Sprocketshaft

011161464
167C2354: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-117-4453
Gun Drive Push Rod

011174453
MC15472: RNCC: 3 | RNVC: 2
MC15472: RNCC: 5 | RNVC: 9

14 Aug 1981

1005-01-118-3935
Turret Base Cover

011183935
12295218: RNCC: 3 | RNVC: 2
12295218: RNCC: 5 | RNVC: 2
12295218: RNCC: 5 | RNVC: 2

3 Sep 1981

1005-01-121-7279
Mounting Pump Bracket

011217279
212F115: RNCC: 3 | RNVC: 2

7 Nov 1981

1005-01-128-5465
Front Sight Post

011285465
9348442: RNCC: 3 | RNVC: 2
3907110034: RNCC: 5 | RNVC: 2
711531501900: RNCC: 6 | RNVC: 9

25 Mar 1982

1005-01-128-5487
Butt Filler

011285487
9348385: RNCC: 3 | RNVC: 2
3618120010: RNCC: 5 | RNVC: 2

25 Mar 1982

1005-01-130-3381
Gun Mount Leg

011303381
9348329: RNCC: 3 | RNVC: 2
3618610015: RNCC: 5 | RNVC: 2
3618610015: RNCC: 5 | RNVC: 2
711531513805: RNCC: 6 | RNVC: 9

21 Apr 1982

1005-01-139-2359
Rear Unload Gate

011392359
132D1691: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-166-1194
Mount Pintle

011661194
70751-02020-102: RNCC: 3 | RNVC: 2
70751-02020-102: RNCC: 5 | RNVC: 2
70751-02020-102: RNCC: 5 | RNVC: 2
70751-02020-102: RNCC: 5 | RNVC: 9
70751-02020-102: RNCC: 5 | RNVC: 9
70751-02020-102: RNCC: 5 | RNVC: 9
70751-02020-102: RNCC: D | RNVC: 9
70751-02020: RNCC: D | RNVC: 9

8 Nov 1983

1005-01-167-1157
Bearing Journal

011671157
7567329-011: RNCC: 3 | RNVC: 2
502090-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1173
Chute Discharge

011671173
508328-01: RNCC: 3 | RNVC: 9
508328-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-167-1176
Link Trigger

011671176
508155-01: RNCC: 3 | RNVC: 2
508155-01: RNCC: 3 | RNVC: 9
508155-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-167-1177
Strap

011671177
508141-01: RNCC: 3 | RNVC: 2
508141-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1221
Post Stand Off

011671221
502451-01: RNCC: 3 | RNVC: 2
502451-01: RNCC: 3 | RNVC: 9
502451-01: RNCC: 5 | RNVC: 2
502451-01: RNCC: 5 | RNVC: 2
502451-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1255
Seat Slipper Plate

011671255
502612-01: RNCC: 3 | RNVC: 2
502612-01: RNCC: 5 | RNVC: 2
502612-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-170-5457
Firing Pin Head

011705457
82A5027A5141: RNCC: 3 | RNVC: 2

26 Jan 1984

1005-01-173-1857
Lateral Adjustment Rachet

011731857
82A5027A1080: RNCC: 3 | RNVC: 2

3 Mar 1984

1005-01-175-0670
Recoil Pad

011750670
82A5027A6172: RNCC: 3 | RNVC: 2

26 Mar 1984

1005-01-182-0853
Support Assembly Right Hand

011820853
HM025-687-1: RNCC: 1 | RNVC: 2
014211-1: RNCC: 3 | RNVC: 2
014211-1: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-174-1995
Recoil Carrier Stop

011741995
82A5027A5042: RNCC: 3 | RNVC: 2

15 Mar 1984

1005-01-106-4105
Guide Roller

011064105
142D5831: RNCC: 3 | RNVC: 2
142D5831: RNCC: 5 | RNVC: 2
142D5831: RNCC: 5 | RNVC: 2
1005PL0960406: RNCC: 6 | RNVC: 9

17 Jan 1981

1005-01-116-1502
Exit Unit Housing

011161502
209F558: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-117-0329
Cartridge Stop

011170329
12524169: RNCC: 3 | RNVC: 2
465-4169: RNCC: 5 | RNVC: 9
2 0132-694: RNCC: 5 | RNVC: 9
465-4169: RNCC: C | RNVC: 1

7 Aug 1981

1005-01-118-7515
Ammo Can 25 Mm Roller

011187515
12295107: RNCC: 3 | RNVC: 2

10 Sep 1981

1005-01-126-7790
Diode

011267790
12298006: RNCC: 3 | RNVC: 2

17 Feb 1982

1005-01-170-8346
Housing Pin

011708346
248795: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-167-1203
Tape Azimuth Indica

011671203
101439-01: RNCC: 3 | RNVC: 9
101439-01: RNCC: 5 | RNVC: 2
101439-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1204
Azimuth Ind Brkt

011671204
502509-01: RNCC: 3 | RNVC: 2
502509-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1223
Support Shaft

011671223
502483-01: RNCC: 3 | RNVC: 2
502483-01: RNCC: 3 | RNVC: 2
502483-01: RNCC: 5 | RNVC: 2
502483-01: RNCC: 5 | RNVC: 2
502483-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1152
Bearing Rotor

011671152
SB-22208-W33-SS-LG: RNCC: 3 | RNVC: 2
101308-01: RNCC: 3 | RNVC: 2
101308-01: RNCC: 7 | RNVC: 2

22 Nov 1983

1005-01-165-0521
Handle Assembly Hat

011650521
502098-01: RNCC: 3 | RNVC: 9
502098-01: RNCC: 5 | RNVC: 2

25 Oct 1983

1005-01-041-9264
Cam Pin

010419264
11691417: RNCC: 3 | RNVC: 2
11691417: RNCC: 5 | RNVC: 1
7268304: RNCC: 5 | RNVC: 9
11691417: RNCC: 5 | RNVC: 9
1005PL0959918: RNCC: 6 | RNVC: 9
1005010419264: RNCC: 6 | RNVC: 9

4 Jun 1977

1005-01-044-1026
Machine Gun Barrel

010441026
11825985: RNCC: 3 | RNVC: 2
3602009930: RNCC: 5 | RNVC: 2
3602012388: RNCC: 5 | RNVC: 2

8 Jul 1977

1005-01-048-4848
Link Assembly Flex

010484848
S767004-151: RNCC: 3 | RNVC: 2
767004-151: RNCC: 5 | RNVC: 9

26 Sep 1977

1005-01-053-3149
Element Shaft

010533149
105D3972: RNCC: 3 | RNVC: 2
1005PL0695554: RNCC: 6 | RNVC: 9

1 Jan 1978

1005-01-055-2152
Exit Drum Cover

010552152
201F927: RNCC: 3 | RNVC: 2
201F927-1: RNCC: 5 | RNVC: 2
1005PL0695760: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-055-2155
Ammunition Drum Assembly Partition

010552155
201F872-2: RNCC: 3 | RNVC: 2
1005PL0696275: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-060-9396
Gun Safing Cam

010609396
205F464: RNCC: 3 | RNVC: 2
205F464: RNCC: 5 | RNVC: 9
205F464: RNCC: 5 | RNVC: 9

7 Jun 1978

1005-01-062-6942
Rounds Counter Bracket

010626942
132D1878: RNCC: 3 | RNVC: 2

21 Jul 1978

1005-01-076-7294
Lower Inner Guide

010767294
209F610: RNCC: 3 | RNVC: 2

10 May 1979

1005-01-077-6049
Mid Barrel Support Assembly

010776049
142D5215: RNCC: 3 | RNVC: 2

26 May 1979

1005-01-078-7423
Solenoid Connector Bracket

010787423
12000203: RNCC: 3 | RNVC: 2
12000203: RNCC: 3 | RNVC: 9
12000203: RNCC: 5 | RNVC: 9
1005PL1287889: RNCC: 6 | RNVC: 9

19 Jun 1979

1005-01-080-2452
Shaft Seal

010802452
AL698: RNCC: 3 | RNVC: 2

22 Jul 1979

NSN 1005-01-081-4835 010814835 WRENCH,EXTENSION,RECEIVER

1005-01-081-4835
Receiver Extension Wrench

010814835
11828589: RNCC: 3 | RNVC: 2

14 Aug 1979

1005-01-088-4403
Right Hand Clutch Dog

010884403
12524084: RNCC: 3 | RNVC: 2
12524084: RNCC: 5 | RNVC: 2
465-4084: RNCC: 5 | RNVC: 9
10125918: RNCC: 6 | RNVC: 9
465-4084: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-098-6912
Anti-Rotation Mechanism

010986912
12295648: RNCC: 3 | RNVC: 2

7 Aug 1980

1005-01-098-7398
Ejection Chute

010987398
12295636: RNCC: 3 | RNVC: 2

7 Aug 1980

1005-01-108-7827
Gun Guard Stop

011087827
12307448: RNCC: 3 | RNVC: 2
12298009: RNCC: 5 | RNVC: 9

5 Mar 1981

1005-01-109-6866
Retainer Cover

011096866
12294770: RNCC: 3 | RNVC: 2

19 Mar 1981

1005-01-111-7790
Switch Plate

011117790
12292511: RNCC: 3 | RNVC: 2

23 Apr 1981

1005-01-112-6281
Assembly Washer

011126281
12317179: RNCC: 3 | RNVC: 2
12317179: RNCC: 5 | RNVC: 2
12292557: RNCC: 5 | RNVC: 9

7 May 1981

1005-01-116-1462
Tie Rod Support

011161462
167C2252: RNCC: 3 | RNVC: 2
167C2252: RNCC: 5 | RNVC: 2
10162754: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1500
Wear Plate Cartridge Guide

011161500
209F548: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-134-3631
Rear Sight Base

011343631
9349074: RNCC: 3 | RNVC: 2
1005011343631: RNCC: 6 | RNVC: 9

3 Jul 1982

1005-01-167-1189
Retainer

011671189
502119-01: RNCC: 3 | RNVC: 2
502119-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-139-2361
Unload Arm

011392361
132D1709: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-140-3278
Front Element Guide

011403278
209F700: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-145-9278
Tow Elevation Drive Slip Clutch Assembly

011459278
12292924: RNCC: 3 | RNVC: 2

21 Jan 1983

1005-01-149-8292
Follower Cam

011498292
2587035-2: RNCC: 1 | RNVC: 2
2587035-2: RNCC: 3 | RNVC: 2

27 Mar 1983

1005-01-150-5796
Internal Ring

011505796
45860: RNCC: 3 | RNVC: 2

6 Apr 1983

1005-01-128-5480
Cocking Channel Cover

011285480
9348302: RNCC: 3 | RNVC: 2
3616740029: RNCC: 5 | RNVC: 2
3616740016: RNCC: 5 | RNVC: 9
711531509103: RNCC: 5 | RNVC: 9

25 Mar 1982

1005-01-167-1222
Nut Lock

011671222
502482-01: RNCC: 3 | RNVC: 2
502482-01: RNCC: 3 | RNVC: 2
502482-01: RNCC: 5 | RNVC: 2
502482-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-131-2121
Small Arms Cleaning Brush

011312121
9348462: RNCC: 3 | RNVC: 2
711419705808: RNCC: 5 | RNVC: 9

6 May 1982

1005-01-170-8347
Actuator Stop

011708347
570044: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-171-4472
End Assembly

011714472
5191122-100: RNCC: 1 | RNVC: 2
1311C6682: RNCC: 3 | RNVC: 2
5191122-100: RNCC: 5 | RNVC: 2
1311C6682: RNCC: 5 | RNVC: 2
0098-LL-TJ2-2982: RNCC: 5 | RNVC: 2
1005PL0958357: RNCC: 6 | RNVC: 9
6570796-101: RNCC: C | RNVC: 1

7 Feb 1984

1005-01-172-1034
Linkage Cover

011721034
82A5027A6610: RNCC: 3 | RNVC: 2

15 Feb 1984

1005-01-177-2665
Latch Handle

011772665
12317155: RNCC: 3 | RNVC: 2
12317155: RNCC: 8 | RNVC: 1
1231F155: RNCC: C | RNVC: 1
12307331: RNCC: C | RNVC: 1

21 Apr 1984

1005-01-181-6019
Tensioner Stop

011816019
7-217236424: RNCC: 3 | RNVC: 2
7-217236424: RNCC: 5 | RNVC: 2
7-217236424: RNCC: 5 | RNVC: 9

13 Jun 1984

1005-01-182-1011
Forward Box End Chute

011821011
7-317236270: RNCC: 3 | RNVC: 2
7-317236270: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-034-9492
Bracket Assembly

010349492
116C3789: RNCC: 3 | RNVC: 2
116C3789: RNCC: 5 | RNVC: 2
116C3789: RNCC: 5 | RNVC: 2

1 Feb 1977

1005-01-036-8197
Lh Feed Center Section Link Gun

010368197
1210B14616-1: RNCC: 3 | RNVC: 2

7 Mar 1977

1005-01-042-2050
Cam Retainer

010422050
201F851: RNCC: 3 | RNVC: 2
201F851: RNCC: 5 | RNVC: 9

7 Jun 1977

1005-01-042-9719
Breech Plug

010429719
11691414: RNCC: 3 | RNVC: 2
11691414: RNCC: 5 | RNVC: 9
1005PL0959928: RNCC: 6 | RNVC: 9

17 Jun 1977

1005-01-049-5382
Entrance End Assemb

010495382
S768003-151: RNCC: 3 | RNVC: 2
768003-151: RNCC: 5 | RNVC: 9
S768003: RNCC: D | RNVC: 9

21 Oct 1977

1005-01-053-3146
Bottom Unload Gate

010533146
201F922: RNCC: 3 | RNVC: 2
1005PL0695226: RNCC: 6 | RNVC: 9

1 Jan 1978

1005-01-053-4393
Gun Mount Roller

010534393
12266067: RNCC: 3 | RNVC: 2
12266067-3: RNCC: C | RNVC: 1

5 Jan 1978

1005-01-055-2158
Drive Access Shaft Assembly

010552158
167C1627: RNCC: 3 | RNVC: 2

3 Feb 1978

1005-01-055-1032
Ammunition Center Assembly

010551032
11830873-106: RNCC: 1 | RNVC: 2
1212B18434: RNCC: 3 | RNVC: 2
205F192-106: RNCC: C | RNVC: 1

1 Feb 1978

1005-01-055-3375
Plug

010553375
MC14369: RNCC: 3 | RNVC: 2
MC14369: RNCC: 5 | RNVC: 9

4 Feb 1978

1005-01-055-6476
Ammunition Cartridge Guide

010556476
209F443: RNCC: 3 | RNVC: 2
201F936: RNCC: 5 | RNVC: 9
1005PL1738031: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-061-3788
Front Fixed Scoop

010613788
209F291: RNCC: 3 | RNVC: 2

19 Jun 1978

1005-01-088-4372
Repair Kit

010884372
12524030: RNCC: 3 | RNVC: 2
12524030: RNCC: 5 | RNVC: 2
465-4030: RNCC: 5 | RNVC: 9
1005PL1563439: RNCC: 6 | RNVC: 9
10103570: RNCC: 6 | RNVC: 9
465-4030: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4382
Cover Assembly

010884382
12524107: RNCC: 3 | RNVC: 2
465-8107: RNCC: 5 | RNVC: 2
2 0040-056: RNCC: 5 | RNVC: 2
12524107: RNCC: 5 | RNVC: 2
2 0040-056: RNCC: 5 | RNVC: 9
12524086: RNCC: 5 | RNVC: 9
465-8107: RNCC: 5 | RNVC: 9
10125934: RNCC: 6 | RNVC: 9

13 Jan 1980

1005-01-110-9895
Fan Retainer

011109895
12294947: RNCC: 3 | RNVC: 2

8 Apr 1981

1005-01-112-1630
Control Panel

011121630
12292020: RNCC: 3 | RNVC: 2

28 Apr 1981

1005-01-112-3946
Resolver Housing

011123946
12295205: RNCC: 3 | RNVC: 2

3 May 1981

1005-01-112-6279
Gyro Support

011126279
12292548: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-116-1463
Threaded End Tie Rod

011161463
167C2253: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1472
Chute Assembly

011161472
176C1377: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1480
Chute End Assembly

011161480
209F352: RNCC: 1 | RNVC: 2
1311C14541-4: RNCC: 3 | RNVC: 2
209F352-100: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1481
Chute End Assembly

011161481
209F352-101: RNCC: 1 | RNVC: 2
1311C14226-3: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1483
Chute End Assembly

011161483
209F355-100: RNCC: 1 | RNVC: 2
1311C14224-5: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-119-7252
Rocker Spring Housing

011197252
12524465: RNCC: 3 | RNVC: 2
465-4465: RNCC: 5 | RNVC: 2
12524465: RNCC: 5 | RNVC: 2
465-4465: RNCC: 5 | RNVC: 9
10126892: RNCC: 6 | RNVC: 9

1 Oct 1981

1005-01-135-4973
Subassembly Buttstock

011354973
9349119: RNCC: 3 | RNVC: 2
64571: RNCC: 5 | RNVC: 2
1005011354973: RNCC: 6 | RNVC: 9

24 Jul 1982

1005-01-129-2447
Motor Direct Current Sleeving

011292447
AA178-128-157: RNCC: 3 | RNVC: 2
AA178-13-5:4: RNCC: 3 | RNVC: 9

4 Apr 1982

1005-01-140-3271
Rear Cartridge Guide

011403271
205F405: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3274
Front Fixed Scoop

011403274
209F269: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3272
Retainer Face Gear Cluster

011403272
205F424: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3281
Aft Pin Support

011403281
211F314: RNCC: 3 | RNVC: 2
10162753: RNCC: 6 | RNVC: 9

11 Oct 1982

1005-01-146-7685
Shoulder Gun Stock Butt Plate

011467685
9349130: RNCC: 3 | RNVC: 2
1005011467685: RNCC: 6 | RNVC: 9

4 Feb 1983

1005-01-147-2619
Rear Element Guide

011472619
132D1902: RNCC: 3 | RNVC: 2

14 Feb 1983

1005-01-147-2616
Exit Cover Assembly

011472616
142D5069: RNCC: 3 | RNVC: 2

14 Feb 1983

1005-01-170-8350
Plate Wafer

011708350
570255: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-174-4985
Rifle Linkage Actuator

011744985
82A5027A1275: RNCC: 3 | RNVC: 2

20 Mar 1984

1005-01-182-1014
Merger Rotor

011821014
014203-1: RNCC: 3 | RNVC: 2
014203-1: RNCC: 3 | RNVC: 9
104203-1: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-036-8193
Gun End Assembly

010368193
1310C14613-2: RNCC: 3 | RNVC: 2

7 Mar 1977

1005-01-038-4472
Gun Bolt Roller

010384472
163B5909: RNCC: 3 | RNVC: 2

7 Apr 1977

1005-01-039-2151
Erosion Adapter Kit

010392151
1122AS100: RNCC: 3 | RNVC: 2

17 Apr 1977

1005-01-042-4677
Latch Assembly

010424677
167C1149: RNCC: 3 | RNVC: 2

10 Jun 1977

1005-01-048-8572
Rear Sight Riser

010488572
12003051: RNCC: 3 | RNVC: 2
1005PL0904749: RNCC: 6 | RNVC: 9

6 Oct 1977

1005-01-050-2105
Arm Assembly Gun Mount

010502105
12266287: RNCC: 3 | RNVC: 2

1 Nov 1977

1005-01-053-3144
Load Gate Arm

010533144
139C6471: RNCC: 3 | RNVC: 2
1005PL0695205: RNCC: 6 | RNVC: 9

1 Jan 1978

1005-01-055-2150
Entrance Drum Cover

010552150
209F444: RNCC: 3 | RNVC: 2
201F926: RNCC: 5 | RNVC: 9
1005PL0695753: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-055-1020
Roller Support

010551020
11830559-1: RNCC: 3 | RNVC: 2
11830559-1: RNCC: C | RNVC: 1

1 Feb 1978

1005-01-055-2153
Scoop Disc Assembly

010552153
105D3755: RNCC: 3 | RNVC: 2
1005PL0696244: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-055-2159
Ammo Conveyor Element

010552159
201F943: RNCC: 3 | RNVC: 2
201F943H9: RNCC: 5 | RNVC: 9
201F943H2: RNCC: 5 | RNVC: 9
201F943: RNCC: 5 | RNVC: 9
201F943: RNCC: 5 | RNVC: 9
201F943H8H: RNCC: 5 | RNVC: 9
201F943H7H: RNCC: 5 | RNVC: 9
201F943: RNCC: 5 | RNVC: 9
1005PL0696308: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-055-3373
Access Housing

010553373
201F958: RNCC: 3 | RNVC: 2
201F958: RNCC: 5 | RNVC: 2
201F958: RNCC: 5 | RNVC: 2
1005PL0697216: RNCC: 6 | RNVC: 9

4 Feb 1978

1005-01-055-6546
Ammunition Chute

010556546
201F946-3: RNCC: 1 | RNVC: 2
0621D18557: RNCC: 3 | RNVC: 2
16VS002011-3: RNCC: 5 | RNVC: 9
1005PL1590373: RNCC: 6 | RNVC: 9
1005PL1595039: RNCC: 6 | RNVC: 9
201F946: RNCC: D | RNVC: 9

9 Feb 1978

1005-01-060-9395
Bolt Assembly Kit

010609395
512L484: RNCC: 3 | RNVC: 2

7 Jun 1978

1005-01-075-3558
Cam Assembly Parts Kit

010753558
7937736-10: RNCC: 3 | RNVC: 2
1005PL0915988: RNCC: 6 | RNVC: 9
1005PL1390452: RNCC: 6 | RNVC: 9
1005PL1733157: RNCC: 6 | RNVC: 9
7937736: RNCC: D | RNVC: 9

19 Apr 1979

1005-01-077-6050
Support Roller

010776050
167C2617: RNCC: 3 | RNVC: 2

26 May 1979

1005-01-088-4363
Forward Feeder Gate

010884363
12524134: RNCC: 3 | RNVC: 2
1005.002204: RNCC: 5 | RNVC: 2
465-4134: RNCC: 5 | RNVC: 9
465-4134: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4388
Housing Recoil Cap

010884388
12524422: RNCC: 3 | RNVC: 2

13 Jan 1980

1005-01-100-4302
Sleeve

011004302
MC14484: RNCC: 3 | RNVC: 2
MC14484: RNCC: 5 | RNVC: 9

6 Sep 1980

1005-01-107-3802
Lubricator Nozzle Assy

011073802
197C7672: RNCC: 3 | RNVC: 2

4 Feb 1981

1005-01-107-5652
Latch Hook

011075652
12307263: RNCC: 3 | RNVC: 2
12296812: RNCC: 5 | RNVC: 9

8 Feb 1981

1005-01-107-7465
Rotor Bearing

011077465
12294450: RNCC: 3 | RNVC: 2

12 Feb 1981

1005-01-110-7632
Equilibrator Cap

011107632
12294511: RNCC: 3 | RNVC: 2

5 Apr 1981

1005-01-111-4010
Reflector Retainer Plate

011114010
12294985: RNCC: 3 | RNVC: 2

16 Apr 1981

1005-01-111-5727
Elevation Drive Housing

011115727
12292418: RNCC: 3 | RNVC: 2

19 Apr 1981

1005-01-111-5728
Switch Lever

011115728
12292438: RNCC: 3 | RNVC: 2

19 Apr 1981

1005-01-113-0760
Commanders Hand Station Housing

011130760
12292568: RNCC: 3 | RNVC: 2

15 May 1981

NSN 1005-01-113-1453 011131453 HOUSING,MANUAL DRIVE

1005-01-113-1453
Manual Drive Housing

011131453
12292393: RNCC: 3 | RNVC: 2

16 May 1981

1005-01-114-0053
Sear Retractor Assembly

011140053
12524295: RNCC: 3 | RNVC: 2
465-4295: RNCC: 5 | RNVC: 9
465-4295: RNCC: C | RNVC: 1

7 Jun 1981

1005-01-114-0068
Ball Bearing Annular Retainer

011140068
12292497: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-114-2299
Traverse Mechanism Shield

011142299
12297697: RNCC: 3 | RNVC: 2

15 Jun 1981

1005-01-116-1456
Scoop Extension Cam Follower

011161456
167C1822: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1507
Rear Fixed Scoop

011161507
209F597: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1512
Actuator Assembly

011161512
432601: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-121-9672
End Fitting

011219672
S258004-151: RNCC: 3 | RNVC: 2
258004-151: RNCC: 5 | RNVC: 9

11 Nov 1981

1005-01-126-7801
Flagstaff Holder

011267801
12307255: RNCC: 3 | RNVC: 2

17 Feb 1982

1005-01-139-2255
Tie Center Section

011392255
209F653-104: RNCC: 1 | RNVC: 2
1211C20912: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-140-3269
Scoop Extension Cam

011403269
205F381: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3270
Front Cartridge Guide

011403270
205F401: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3273
Feeder Rear Housing

011403273
209F235: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-148-4204
Plug Set

011484204
SP780-107: RNCC: 3 | RNVC: 2
SP780-107: RNCC: 5 | RNVC: 9
10307124: RNCC: 6 | RNVC: 9

5 Mar 1983

1005-01-149-8298
Gun Component Retainer

011498298
12316778: RNCC: 3 | RNVC: 2

27 Mar 1983

1005-01-152-2302
Valve Assembly Lever

011522302
MC14728: RNCC: 3 | RNVC: 2
MC14728: RNCC: 5 | RNVC: 9

29 Apr 1983

1005-01-166-1945
Brush Block Assembl

011661945
65697-1: RNCC: 3 | RNVC: 2
65697-1: RNCC: 5 | RNVC: 9
101514: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-166-4864
Angle Block

011664864
570559: RNCC: 3 | RNVC: 2
10162739: RNCC: 6 | RNVC: 9

12 Nov 1983

1005-01-167-1163
Receiver Lock Assem

011671163
502126-01: RNCC: 3 | RNVC: 2
502126-01: RNCC: 3 | RNVC: 2
502126-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-167-1181
Coax Firing Assembl

011671181
508152-01: RNCC: 3 | RNVC: 2
508152-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1252
Ball Plunger

011671252
CL-70-SBP-3: RNCC: 3 | RNVC: 2
101708-01: RNCC: 5 | RNVC: 2
101708-01: RNCC: 5 | RNVC: 9
101708-01: RNCC: 7 | RNVC: 2

22 Nov 1983

1005-01-167-1277
Ap Forwarder Assemb

011671277
508191-01: RNCC: 3 | RNVC: 2
508191-01: RNCC: 5 | RNVC: 2
508191-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-170-5460
Firing Pin

011705460
82A5027A5142: RNCC: 3 | RNVC: 2

26 Jan 1984

1005-01-174-2178
Cartridge Ejector

011742178
82A5027A5130: RNCC: 3 | RNVC: 2

15 Mar 1984

1005-01-181-0906
Recoil Buffer Assembly

011810906
82A5027A5096: RNCC: 3 | RNVC: 2

6 Jun 1984

1005-01-182-1012
Tr Housing Assembly

011821012
014201-1: RNCC: 3 | RNVC: 2
014201-1: RNCC: 3 | RNVC: 9
014101-1: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-1031
Track Support Assembly

011821031
7-317236204: RNCC: 3 | RNVC: 2
7-317236204: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-1028
Switch Striker

011821028
7-317236437: RNCC: 3 | RNVC: 2
7-317236437: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-3699
Outer Guide Assembly

011823699
HM025-675-1: RNCC: 1 | RNVC: 2
014225-1: RNCC: 3 | RNVC: 2
014225-1: RNCC: C | RNVC: 1

23 Jun 1984

1005-01-182-7479
Damper Housing

011827479
387-3950: RNCC: 3 | RNVC: 2
387-3950: RNCC: 3 | RNVC: 9
387-3950: RNCC: 5 | RNVC: 9
387-3950: RNCC: 5 | RNVC: 9

27 Jun 1984

1005-00-034-8013
Compression Helical Spring

000348013
8710154: RNCC: 3 | RNVC: 2
A10680: RNCC: 5 | RNVC: 2
0740621: RNCC: 5 | RNVC: 2
1005000348013: RNCC: 6 | RNVC: 9
5360000348013: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-051-1439
Chute End Assembly

000511439
211F269-103: RNCC: 3 | RNVC: 2
1311C6682-3: RNCC: 5 | RNVC: 2

11 May 1967

1005-00-049-9324
Vernier Assy

000499324
24204472: RNCC: 3 | RNVC: 2
5714375: RNCC: 5 | RNVC: 2
8675540: RNCC: 5 | RNVC: 9
24204472: RNCC: 5 | RNVC: 9
8675540: RNCC: 5 | RNVC: 9
8675540: RNCC: 5 | RNVC: 9
2541PL0848599: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-017-9548
Bolt Catch

000179548
SP 62301: RNCC: 3 | RNVC: 2
SP62301: RNCC: 5 | RNVC: 1
CF62301: RNCC: 5 | RNVC: 2
8448628: RNCC: 5 | RNVC: 2
62301: RNCC: 5 | RNVC: 2
10050179548: RNCC: 6 | RNVC: 9
1005000179548: RNCC: 6 | RNVC: 9
8448628: RNCC: C | RNVC: 1

1 Jan 1961

1005-00-052-8252
Idler Shaft

000528252
133B7494: RNCC: 3 | RNVC: 2

18 May 1967

1005-00-051-1575
Pin Retainer

000511575
114C2595: RNCC: 3 | RNVC: 2
1005PL0693525: RNCC: 6 | RNVC: 9
114C2595: RNCC: C | RNVC: 1

11 May 1967

1005-00-051-1579
Ammunition Chute

000511579
209F653-105: RNCC: 3 | RNVC: 2
1211C21069: RNCC: 5 | RNVC: 2
1005PL0958358: RNCC: 6 | RNVC: 9
5191122-101: RNCC: C | RNVC: 1
6570796-102: RNCC: C | RNVC: 1

11 May 1967

1005-00-053-2559
Stowage Hanger

000532559
10934145: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-056-5596
Valve Plate

000565596
322506: RNCC: 3 | RNVC: 2

27 May 1967

1005-00-136-2297
Breather Plug

001362297
11662655: RNCC: 3 | RNVC: 2
M98: RNCC: 5 | RNVC: 2

15 Jan 1969

1005-00-157-7932
Cotter

001577932
299726PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-279-0565
Locking Lever Assembly

002790565
117D2344: RNCC: 3 | RNVC: 2
117D2344: RNCC: 5 | RNVC: 2
117D2344: RNCC: 5 | RNVC: 2

8 Aug 1973

1005-00-157-7121
Pod Stiffnut

001577121
H42-4: RNCC: 3 | RNVC: 2
E293004-60: RNCC: 3 | RNVC: 9
H42-4: RNCC: 5 | RNVC: 9
E293004-60: RNCC: 5 | RNVC: 9

14 Jun 1971

1005-00-368-0367
Ammunition Drum Assembly Partition

003680367
105D3454: RNCC: 3 | RNVC: 2

27 Feb 1974

1005-00-368-0366
Ammunition Drum Assembly Partition

003680366
105D3453: RNCC: 3 | RNVC: 2

27 Feb 1974

1005-00-408-5366
Timing Pin

004085366
11701055: RNCC: 3 | RNVC: 2
11701055: RNCC: 5 | RNVC: 9

10 Jul 1970

1005-00-450-7289
Mounting Stop

004507289
J11729-96: RNCC: 3 | RNVC: 2
11830455: RNCC: 5 | RNVC: 2

17 Dec 1969

1005-00-453-5827
Rotor Track

004535827
11838550: RNCC: 3 | RNVC: 2

9 Apr 1969

1005-00-477-5799
Valve-Control Spool Assembly

004775799
MC12259: RNCC: 3 | RNVC: 2
MC12259: RNCC: 5 | RNVC: 9
MC12259: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-477-5797
Valve-Control Guide

004775797
MC12257: RNCC: 3 | RNVC: 2
MC12257: RNCC: 5 | RNVC: 9

12 Jun 1974

1005-00-487-4100
Gun Cover

004874100
11631791: RNCC: 3 | RNVC: 2
10054874100: RNCC: 6 | RNVC: 9
1005004874100: RNCC: 6 | RNVC: 9

2 Jun 1969

1005-00-538-4060
Rod End Clevis

005384060
5384060: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-544-3715
Mount Pintle

005443715
2625098: RNCC: 3 | RNVC: 2

6 Oct 1974

1005-00-570-3706
Forward Track

005703706
201F116: RNCC: 3 | RNVC: 2
201F116: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-570-3725
Feeder Mechanism Housing

005703725
198F220: RNCC: 3 | RNVC: 2
198F220: RNCC: 5 | RNVC: 2
198F220: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-501-3214
Lanyard Loop

005013214
5013214: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-570-3792
Barrel Mount Assembly

005703792
167C1225: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-501-3516
Comp Helical Spring

005013516
5013516: RNCC: 3 | RNVC: 2
A10264: RNCC: 5 | RNVC: 2
201030008: RNCC: 5 | RNVC: 2
A20563: RNCC: 5 | RNVC: 2
3662090100: RNCC: 5 | RNVC: 2
5360PL0946966: RNCC: 6 | RNVC: 9
1005005013516: RNCC: 6 | RNVC: 9
75F5012: RNCC: 8 | RNVC: 2

1 Jan 1961

1005-00-600-8934
Front Sight

006008934
6008934: RNCC: 3 | RNVC: 2
A10219: RNCC: 5 | RNVC: 2
201010016: RNCC: 5 | RNVC: 2
1005PL0902919: RNCC: 6 | RNVC: 9
1005006008934: RNCC: 6 | RNVC: 9
75F6007: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-515-2835
Fiber Disk Buffer

005152835
5152835: RNCC: 3 | RNVC: 2
A10414: RNCC: 5 | RNVC: 2
3662003893: RNCC: 5 | RNVC: 2
201060009: RNCC: 5 | RNVC: 2
5152835: RNCC: 5 | RNVC: 9
5340PL0928033: RNCC: 6 | RNVC: 9
10093798: RNCC: 6 | RNVC: 9
1005005152835: RNCC: 6 | RNVC: 9
75F2033: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-501-3613
Compression Helical

005013613
5013613: RNCC: 3 | RNVC: 2
3662001080: RNCC: 5 | RNVC: 2
A10366: RNCC: 5 | RNVC: 2
201010504: RNCC: 5 | RNVC: 2
5360PL0947865: RNCC: 6 | RNVC: 9
1005-501-3613: RNCC: 6 | RNVC: 9
1005005013613: RNCC: 6 | RNVC: 9
10074143: RNCC: 6 | RNVC: 9
75F6049: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-515-2896
Flat Spring

005152896
5152896: RNCC: 3 | RNVC: 2
A10707: RNCC: 5 | RNVC: 2
283453: RNCC: 5 | RNVC: 2
1005-515-2896: RNCC: 6 | RNVC: 9
1005005152896: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-529-8584
Sprocket Shaft

005298584
189F858: RNCC: 3 | RNVC: 2

7 Sep 1974

1005-00-531-7771
Valve-Control Plug

005317771
MC12263: RNCC: 3 | RNVC: 2
MC12263: RNCC: 5 | RNVC: 9

11 Sep 1974

1005-00-701-2733
Compression Helical Spring

007012733
7012733: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-701-2757
Shaft Assembly Worm

007012757
7012757: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-701-2752
Compression Helical Spring

007012752
7012752: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-716-1094
Cradle Locking Pin

007161094
7161094: RNCC: 3 | RNVC: 2
A10820: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-716-2132
Small Arms Cleaning Brush

007162132
7162132: RNCC: 3 | RNVC: 2
7162132: RNCC: 3 | RNVC: 9
7162132: RNCC: 5 | RNVC: 2
10057162132: RNCC: 6 | RNVC: 9
1005PL2047593: RNCC: 6 | RNVC: 9
ARMYDWG7162132: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-726-5151
Ejector Pin

007265151
7265151: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-726-5604
Firing Pin

007265604
7265604: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-726-5862
Trunnion Block Shim

007265862
7265862: RNCC: 3 | RNVC: 2
6008951-10: RNCC: 5 | RNVC: 2
6008951: RNCC: D | RNVC: 9

1 Jan 1963

1005-00-731-2953
Recoil Booster

007312953
7312953: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-731-3750
Ejector Pi Retainer

007313750
7313750: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-758-1763
Gun Mount Yoke Assy

007581763
6-86048-1: RNCC: 3 | RNVC: 9
78-4500: RNCC: 5 | RNVC: 9
6-86048-1: RNCC: C | RNVC: 1

1 Jan 1960

1005-00-795-8909
Turret Gun Cradle

007958909
581771-1: RNCC: 3 | RNVC: 2
581771-1: RNCC: 3 | RNVC: 9

1 Jan 1960

1005-00-824-3530
Ammunition Feeder Shaft

008243530
114C2806: RNCC: 3 | RNVC: 2

11 Aug 1967

1005-00-840-1749
Receive Gas Tube

008401749
8401749: RNCC: 3 | RNVC: 2
8401749: RNCC: 5 | RNVC: 2

1 Jan 1962

1005-00-891-7907
Gun Mount Cam Lock

008917907
11697636: RNCC: 3 | RNVC: 2
11697636: RNCC: 5 | RNVC: 9

20 Jan 1967

1005-00-914-2942
Receiver End Plate

009142942
62358: RNCC: 3 | RNVC: 2
CF62358: RNCC: 5 | RNVC: 2
8448729: RNCC: 5 | RNVC: 2

11 Jul 1966

1005-00-915-5700
Timing Pin Set

009155700
5910338: RNCC: 3 | RNVC: 2

31 Oct 1965

1005-00-922-4552
Gun Instl Housing

009224552
905D426: RNCC: 3 | RNVC: 2

17 Apr 1968

1005-00-992-7302
Magazine Catch Button

009927302
8448636: RNCC: 3 | RNVC: 2
SP 62032: RNCC: 5 | RNVC: 1
SP62032: RNCC: 5 | RNVC: 1
62032: RNCC: 5 | RNVC: 2
CF62032: RNCC: 5 | RNVC: 2
1005009927302: RNCC: 6 | RNVC: 9
10059927302: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-01-003-2801
Ammunition Chute Section

010032801
201F698-1: RNCC: 1 | RNVC: 2
1221C17550: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-003-2805
Gun Box End Assembly

010032805
201F699-4: RNCC: 1 | RNVC: 2
1321C17547: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-012-4875
Ammunition Chute

010124875
0749D18134: RNCC: 3 | RNVC: 2

11 Nov 1975

1005-01-029-3217
Motor Mount

010293217
537AS292: RNCC: 3 | RNVC: 2

16 Oct 1976

1005-00-279-0576
Ammo Conveyor

002790576
227B7232: RNCC: 3 | RNVC: 2
162B8298: RNCC: 5 | RNVC: 9

8 Aug 1973

1005-00-157-5328
Link Guide

001575328
7R9638657: RNCC: 3 | RNVC: 2
7R148: RNCC: 3 | RNVC: 2
7R148: RNCC: 5 | RNVC: 2
D5E9240-161: RNCC: 5 | RNVC: 2
7R148: RNCC: 5 | RNVC: 9
7R148: RNCC: 5 | RNVC: 9

14 Apr 1971

1005-00-333-6662
Mount Pintle

003336662
2625097: RNCC: 3 | RNVC: 2

19 Dec 1973

1005-00-494-4526
Feede Sprocket Assy

004944526
116C3395: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-491-5478
Ammunition Chute Adapter

004915478
11838513: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-501-3197
Front Sight

005013197
5013197: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-570-3729
Pin Support

005703729
196B7112: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-600-8868
Sight Aperture

006008868
6008868: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-514-0856
Button

005140856
27W2531A: RNCC: 3 | RNVC: 2
5140856: RNCC: 5 | RNVC: 2
N23460: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-550-4052
Trunnion Adapter

005504052
5504052: RNCC: 3 | RNVC: 2
5504052: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-570-3623
Ammunition Drum Assembly Partition

005703623
201F341: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-501-3527
Comp Helical Spring

005013527
5013527: RNCC: 3 | RNVC: 2
3662000946: RNCC: 5 | RNVC: 2
201010026: RNCC: 5 | RNVC: 2
A10409: RNCC: 5 | RNVC: 2
05415230006237: RNCC: 5 | RNVC: 2
5360PL0946969: RNCC: 6 | RNVC: 9
1005-501-3527: RNCC: 6 | RNVC: 9
366-200-0946: RNCC: 6 | RNVC: 9
53605013527: RNCC: 6 | RNVC: 9
10074200: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3707
Exit Fwd Scoop Guide

005703707
198F266: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3704
Gun Mechanism Carriage

005703704
201F113: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-051-1543
Feed Cover

000511543
114C2778: RNCC: 3 | RNVC: 2

11 May 1967

1005-00-072-5376
Small Arms Sling

000725376
11010038: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-080-3598
Automatic Diffuser Assy

000803598
135B6315: RNCC: 3 | RNVC: 2

6 Dec 1967

1005-00-131-6249
Switch Actuating Trigger

001316249
11644147: RNCC: 3 | RNVC: 2
11644147: RNCC: 5 | RNVC: 9

11 Dec 1968

1005-00-140-3515
Blank Ammunition Firing Attachment

001403515
12002981: RNCC: 3 | RNVC: 2
1005001403515: RNCC: 6 | RNVC: 9

20 Jul 1973

1005-00-148-2324
Bolt Head Lock

001482324
11698279: RNCC: 3 | RNVC: 2
1005PL0961226: RNCC: 6 | RNVC: 9

24 Sep 1971

1005-00-167-5616
End Gun Plate

001675616
11698286: RNCC: 3 | RNVC: 2
11698286: RNCC: 5 | RNVC: 9
11698286: RNCC: 5 | RNVC: 9
11698286: RNCC: 5 | RNVC: 9
11698286: RNCC: 5 | RNVC: 9
11698286: RNCC: 5 | RNVC: 9
1005PL0960215: RNCC: 6 | RNVC: 9

17 Nov 1971

1005-00-268-6430
Scoop Shaft Assembly

002686430
125C3576: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-271-1568
Unload Drive Assembly Housing

002711568
139C6437: RNCC: 3 | RNVC: 2
139C6437: RNCC: 5 | RNVC: 2
139C6437: RNCC: 5 | RNVC: 2

25 Jul 1973

1005-00-275-5795
Chute Support Bracket

002755795
117D2526: RNCC: 3 | RNVC: 2
117D2526: RNCC: 5 | RNVC: 9

4 Aug 1973

1005-00-279-0530
Gun Filter And Orifice Assembly

002790530
328765: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-1049
Double Universal Joint

002791049
20AD571: RNCC: 3 | RNVC: 2
117D2236: RNCC: 7 | RNVC: 2

8 Aug 1973

1005-00-279-0665
Drum Cover Assembly

002790665
176F552: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-283-9439
Bipod Case

002839439
12002974: RNCC: 3 | RNVC: 2

31 Aug 1973

1005-00-335-7318
Cam Lock

003357318
11691677: RNCC: 3 | RNVC: 2
11691677: RNCC: 5 | RNVC: 2
11691677: RNCC: 5 | RNVC: 9
11691677: RNCC: 5 | RNVC: 9
1005003357318: RNCC: 6 | RNVC: 9
1005PL0911285: RNCC: 6 | RNVC: 9

24 Dec 1973

1005-00-383-1102
Gun Yoke Support Assembly

003831102
68A321113-1001: RNCC: 3 | RNVC: 2

21 Mar 1974

1005-00-437-4753
Magazine T Coupling

004374753
F99833: RNCC: 3 | RNVC: 2
F99833: RNCC: 5 | RNVC: 1
F99833: RNCC: 5 | RNVC: 2
14696: RNCC: 5 | RNVC: 9

29 Aug 1969

1005-00-437-4765
Safety Detent Ball

004374765
23223: RNCC: 3 | RNVC: 2
F23223: RNCC: 5 | RNVC: 1
F23223: RNCC: 5 | RNVC: 2

29 Aug 1969

1005-00-457-5078
Gun Mount Bag Assy

004575078
65751-03011-042: RNCC: 3 | RNVC: 2

8 Sep 1969

1005-00-500-9300
Comp Helical Spring

005009300
5009300: RNCC: 3 | RNVC: 2
201060008: RNCC: 5 | RNVC: 2
A10363: RNCC: 5 | RNVC: 2
A20558: RNCC: 5 | RNVC: 2
3662003782: RNCC: 5 | RNVC: 2
10093845: RNCC: 6 | RNVC: 9
5360PL0946935: RNCC: 6 | RNVC: 9
1005005009300: RNCC: 6 | RNVC: 9
A006-500-9300: RNCC: 6 | RNVC: 9
75F2032: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-501-3155
Rear Sight Plunger

005013155
5013155: RNCC: 3 | RNVC: 2
3662003340: RNCC: 5 | RNVC: 2
05415230000518: RNCC: 5 | RNVC: 2
A10288: RNCC: 5 | RNVC: 2
201010114: RNCC: 5 | RNVC: 2
RE0294759: RNCC: 5 | RNVC: 2
10092875: RNCC: 6 | RNVC: 9
5340PL0928015: RNCC: 6 | RNVC: 9
1005-501-3155: RNCC: 6 | RNVC: 9
75F6232: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-550-4047
Bar Jacket Assembly

005504047
5504047: RNCC: 3 | RNVC: 2

21 Mar 1969

1005-00-501-3692
Tors Helical Spring

005013692
5013692: RNCC: 3 | RNVC: 2
3662090130: RNCC: 5 | RNVC: 2
A10475: RNCC: 5 | RNVC: 2
A10316: RNCC: 5 | RNVC: 2
296095: RNCC: 5 | RNVC: 2
201050004: RNCC: 5 | RNVC: 2
1005005013692: RNCC: 6 | RNVC: 9
5360PL0947874: RNCC: 6 | RNVC: 9
75F6120: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-564-0968
Center Section Assy

005640968
905D143-3: RNCC: 1 | RNVC: 2
8437048-3: RNCC: 3 | RNVC: 2
10184-2: RNCC: 3 | RNVC: 2
1005-564-0968: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-570-3692
Gun System Drive Assembly

005703692
201F135: RNCC: 3 | RNVC: 2
201F135: RNCC: 5 | RNVC: 2
201F135: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-508-2586
Compression Helical Spring

005082586
7268250: RNCC: 3 | RNVC: 2
A10673: RNCC: 5 | RNVC: 2
0740601: RNCC: 5 | RNVC: 2
1005-508-2586: RNCC: 6 | RNVC: 9
1005005082586: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-518-4523
Elevation Switch Assembly

005184523
114C2024: RNCC: 3 | RNVC: 2

13 Aug 1974

1005-00-570-3717
Gun Spider

005703717
198F238: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3723
Ammunition Drum Plug

005703723
139C6875: RNCC: 3 | RNVC: 2
198F216-2: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-570-3827
Transfer Drive Assembly

005703827
125C3836: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3865
Hydraulic Drive Unit Plug

005703865
MC14137: RNCC: 3 | RNVC: 2
MC14137: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-699-9941
Ammunition Chute Assembly

006999941
7268769: RNCC: 3 | RNVC: 2
178D135G1: RNCC: 5 | RNVC: 9
7268769: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-716-0631
Swab

007160631
7160631: RNCC: 3 | RNVC: 2
7160631: RNCC: 3 | RNVC: 2
ARMYDWG7160631: RNCC: 5 | RNVC: 2
7160631: RNCC: 5 | RNVC: 9
D7160631: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-731-2679
Buffer Accelerator

007312679
7312679: RNCC: 3 | RNVC: 9
A20332: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-731-3069
Ammunition Feed Pawl

007313069
7313069: RNCC: 3 | RNVC: 2
A10335: RNCC: 5 | RNVC: 2
201010019: RNCC: 5 | RNVC: 2
3662001682: RNCC: 5 | RNVC: 2
3040PL0911505: RNCC: 6 | RNVC: 9
366-200-1682: RNCC: 6 | RNVC: 9
1005007313069: RNCC: 6 | RNVC: 9
10092523: RNCC: 6 | RNVC: 9
75F6095: RNCC: 8 | RNVC: 2
ARMYDWG7313069: RNCC: C | RNVC: 1

1 Jan 1963

1005-00-732-6283
Universal Link Suba

007326283
240174: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-824-4485
Safety Control Switch And Lead Assembly

008244485
8437361: RNCC: 3 | RNVC: 2

14 Aug 1967

1005-00-840-1755
Guide Operating Spr

008401755
8401755: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-893-8328
Unload U Wear Plate

008938328
823D777: RNCC: 3 | RNVC: 2

23 Jan 1967

1005-00-895-3735
End Plate

008953735
8436990: RNCC: 3 | RNVC: 2
1005-895-3735: RNCC: 6 | RNVC: 9
10129607: RNCC: 6 | RNVC: 9

27 Jan 1967

1005-00-912-3629
Swaging Sleeve

009123629
8427871: RNCC: 3 | RNVC: 2
1005009123629: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-919-7278
Small Arms Sling Swivel

009197278
7267089: RNCC: 3 | RNVC: 2
1005009197278: RNCC: 6 | RNVC: 9

1 Jan 1960

1005-00-938-4566
Gate Post

009384566
135B5882: RNCC: 3 | RNVC: 2

15 Mar 1967

1005-00-999-8830
Magazine

009998830
16715: RNCC: 3 | RNVC: 2

30 Mar 1966

1005-01-003-2800
Gun Box End Assembly

010032800
201F698-3: RNCC: 1 | RNVC: 2
1321C17554: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-011-5805
Gun Restrictor

010115805
MC14335: RNCC: 1 | RNVC: 2
JETA1875100D: RNCC: 3 | RNVC: 2
MC14335: RNCC: 5 | RNVC: 9

23 Oct 1975

1005-00-034-8053
Compression Helical Spring

000348053
8715827: RNCC: 3 | RNVC: 2
0740630: RNCC: 5 | RNVC: 2
A10677: RNCC: 5 | RNVC: 2
5360000348053: RNCC: 6 | RNVC: 9
1005000348053: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-056-2252
Gun Hand Guard

000562252
8448561: RNCC: 3 | RNVC: 2
62198: RNCC: 5 | RNVC: 2
10050562252: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-107-2812
Conveyer Element

001072812
162B8430: RNCC: 3 | RNVC: 2
1005PL0958354: RNCC: 6 | RNVC: 9

29 Sep 1972

1005-00-131-6255
Baffle Plate

001316255
11644582: RNCC: 3 | RNVC: 2

11 Dec 1968

1005-00-148-2325
Rear Unlock Cam

001482325
11698264: RNCC: 3 | RNVC: 2
196C642P1: RNCC: 5 | RNVC: 9

24 Sep 1971

1005-00-157-7950
Holder

001577950
299705PC2: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-167-4336
Small Arms Sling

001674336
8448770: RNCC: 3 | RNVC: 2

20 Nov 1971

1005-00-167-5687
Connector Bracket

001675687
11010187: RNCC: 3 | RNVC: 2
11010187: RNCC: 5 | RNVC: 2
11010187: RNCC: 5 | RNVC: 9
1005001675687: RNCC: 6 | RNVC: 9

20 Nov 1971

1005-00-175-3509
Lever

001753509
299894PC4: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-209-9691
Comp Helical Spring

002099691
7160628: RNCC: 3 | RNVC: 2
A10406: RNCC: 5 | RNVC: 2
303476: RNCC: 5 | RNVC: 2
201010020: RNCC: 5 | RNVC: 2
3662090170: RNCC: 5 | RNVC: 2
5360PL0946907: RNCC: 6 | RNVC: 9
1005-209-9691: RNCC: 6 | RNVC: 9
1005-716-0628: RNCC: 6 | RNVC: 9
1005002099691: RNCC: 6 | RNVC: 9
75F6035: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-250-0800
Gun Muzzle Bearing Ring

002500800
68A732013-2005: RNCC: 3 | RNVC: 2
68A732013-2005: RNCC: 5 | RNVC: 2
68A732013-2005: RNCC: 5 | RNVC: 9

13 Jun 1973

1005-00-268-6432
Timing Pin Bracket Assembly

002686432
117D2703: RNCC: 3 | RNVC: 2

18 Jul 1973

1005-00-275-5714
Rear Element Guide

002755714
176F584: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-275-5636
Ammunition Cartridge Guide

002755636
176F582: RNCC: 3 | RNVC: 2

4 Aug 1973

1005-00-276-7832
Element Sprocket Assembly

002767832
139C6532: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0574
Chute Support Cover

002790574
139C6929: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-282-1676
Forward Sprocket Assembly

002821676
139C6530: RNCC: 3 | RNVC: 2

22 Aug 1973

1005-00-299-1192
Compression Helical Spring

002991192
5013525: RNCC: 3 | RNVC: 2
A10408: RNCC: 5 | RNVC: 2
3662000920: RNCC: 5 | RNVC: 2
201010032: RNCC: 5 | RNVC: 2
05415230006091: RNCC: 5 | RNVC: 2
10092560: RNCC: 6 | RNVC: 9
5360PL0946911: RNCC: 6 | RNVC: 9
1005-299-1192: RNCC: 6 | RNVC: 9
5360-299-1192: RNCC: 6 | RNVC: 9
5360002991192: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-329-4018
Lubricator Container Assembly

003294018
105D3371: RNCC: 3 | RNVC: 2
1005PL0959229: RNCC: 6 | RNVC: 9

9 Dec 1973

1005-00-437-4764
Gun Grip Safety

004374764
25115: RNCC: 3 | RNVC: 2
F25115: RNCC: 5 | RNVC: 1
F25115: RNCC: 5 | RNVC: 2

29 Aug 1969

1005-00-453-5823
Rotor Track

004535823
11838547: RNCC: 3 | RNVC: 2
581911838547: RNCC: 5 | RNVC: 2

9 Apr 1969

1005-00-491-5465
Clip-Chuting

004915465
11838512: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-500-9356
Comp Helical Spring

005009356
5009356: RNCC: 3 | RNVC: 2
201060016: RNCC: 5 | RNVC: 2
A20560: RNCC: 5 | RNVC: 2
A10470: RNCC: 5 | RNVC: 2
5360PL0946957: RNCC: 6 | RNVC: 9
1005-500-9356: RNCC: 6 | RNVC: 9
1005005009356: RNCC: 6 | RNVC: 9
75F2027: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-516-2766
Azimuth Mount

005162766
175F633-2: RNCC: 3 | RNVC: 2

11 Aug 1974

1005-00-522-6799
Booster Switch Assembly

005226799
114C2022: RNCC: 3 | RNVC: 2

23 Aug 1974

1005-00-535-4180
Chute Center Section

005354180
11830873-101: RNCC: 1 | RNVC: 2
1212B16736: RNCC: 3 | RNVC: 2
205F192-101: RNCC: 5 | RNVC: 9
1212B16037: RNCC: 5 | RNVC: 9

17 Sep 1974

1005-00-555-9337
Tripod Mount Leg

005559337
5559337: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-570-3713
Ammunition Drum Assembly Partition

005703713
198F250: RNCC: 3 | RNVC: 2
198F250: RNCC: 5 | RNVC: 2
198F250: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-570-3769
Recoil Sensor Housing Extension

005703769
132D1091: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3899
Spool Assembly

005703899
MC14090: RNCC: 3 | RNVC: 2
MC14090: RNCC: 5 | RNVC: 9

1 Dec 1974

1005-00-574-1214
Control Strap Assy

005741214
FDC1575-158: RNCC: 3 | RNVC: 2
67C4509: RNCC: 7 | RNVC: 2

17 Jan 1968

1005-00-600-8583
Manual Control Handle

006008583
6008583: RNCC: 3 | RNVC: 2
201100106: RNCC: 5 | RNVC: 2
A10618: RNCC: 5 | RNVC: 2
A16618: RNCC: 5 | RNVC: 2
A20200: RNCC: 5 | RNVC: 2
1005PL1719086: RNCC: 6 | RNVC: 9
1005006008583: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-614-7845
Oil Buffer Tube Cap

006147845
61457845: RNCC: 3 | RNVC: 2
6009731: RNCC: 5 | RNVC: 2
1005006147845: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-659-1031
Spare Barrel Cover

006591031
6591031: RNCC: 3 | RNVC: 2
1005006591031: RNCC: 5 | RNVC: 2
059 15 M ----MIT50 TEX-01-0-0 A: RNCC: 5 | RNVC: 2
1005006591031: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-701-2730
Pintle Lock Handle

007012730
7012730: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-704-6653
Ammunition Box Tray Guide Bracket

007046653
7046653: RNCC: 3 | RNVC: 2
7046653: RNCC: 8 | RNVC: 1

1 Jan 1963

1005-00-715-9085
Traveling Ring Cam

007159085
7794554: RNCC: 3 | RNVC: 9

1 Jan 1963

1005-00-714-9678
Traver Bar Assembly

007149678
7149678: RNCC: 3 | RNVC: 2
A10762: RNCC: 5 | RNVC: 2
717124414602: RNCC: 5 | RNVC: 9
1005007149678: RNCC: 6 | RNVC: 9
1005PL0958604: RNCC: 6 | RNVC: 9
1005-714-9678: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-716-1711
Trac Cover E Spring

007161711
7161711: RNCC: 3 | RNVC: 9
A20269: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-731-3868
Adapter Positioner

007313868
7313868: RNCC: 3 | RNVC: 2
7313868: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-771-9725
Air Piston

007719725
DYLZ637: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-00-799-7410
Empty Cartridge Bag

007997410
7997410: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-785-2605
I Indi Pin Assembly

007852605
7790768: RNCC: 3 | RNVC: 9
7790768: RNCC: 5 | RNVC: 2
1005PL0960400: RNCC: 6 | RNVC: 9
7790768: RNCC: C | RNVC: 1

1 Jan 1962

1005-00-795-2456
Pintle Support

007952456
7952456: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-840-3884
Lubricator Bracket

008403884
135B6252: RNCC: 3 | RNVC: 2
1005PL0959322: RNCC: 6 | RNVC: 9

15 Sep 1967

1005-00-840-8768
Elevation Stop

008408768
8408768: RNCC: 3 | RNVC: 2
A10739: RNCC: 5 | RNVC: 2

1 Jan 1962

1005-00-861-4683
Ammunition Handling Sprocket

008614683
66F12699: RNCC: 3 | RNVC: 2
175F758: RNCC: 5 | RNVC: 2

9 Oct 1967

1005-00-880-3139
Gun Lubricator Tube

008803139
133B7484-3: RNCC: 3 | RNVC: 2

3 Nov 1967

1005-00-887-3077
Gun Drive Retainer

008873077
607395: RNCC: 3 | RNVC: 2

1 Jan 1962

1005-00-893-8239
Exit Unit Ass Guide

008938239
175F521: RNCC: 3 | RNVC: 2
175F521: RNCC: 5 | RNVC: 9

23 Jan 1967

1005-00-922-8054
Push Rod Guide

009228054
11701218: RNCC: 3 | RNVC: 9

25 Dec 1965

1005-00-937-2250
Small Arms Cleaning Rod Swab Holder Section

009372250
11686327: RNCC: 3 | RNVC: 2
SP62687: RNCC: 5 | RNVC: 2
11686327: RNCC: 5 | RNVC: 2
711419702506: RNCC: 6 | RNVC: 9

25 Nov 1966

1005-00-938-0947
Loader Handcrank

009380947
11698215: RNCC: 3 | RNVC: 2
11698215: RNCC: 5 | RNVC: 9
903D867: RNCC: 5 | RNVC: 9
1005PL1050306: RNCC: 6 | RNVC: 9
11698215: RNCC: C | RNVC: 1

10 Mar 1967

1005-00-938-4551
Gun Feed Stripper

009384551
175F284: RNCC: 3 | RNVC: 2

15 Mar 1967

1005-00-940-8077
Tripod Mount Leg Section

009408077
11010426: RNCC: 3 | RNVC: 2
A10774: RNCC: 5 | RNVC: 2
717124412606: RNCC: 5 | RNVC: 9
1005PL0958611: RNCC: 6 | RNVC: 9
1005009408077: RNCC: 6 | RNVC: 9

27 Nov 1965

1005-00-972-8128
Ammunition Chute Adapter

009728128
7792345: RNCC: 1 | RNVC: 2
S762-205: RNCC: 3 | RNVC: 2
7792345: RNCC: 5 | RNVC: 9

1 Jan 1962

1005-00-980-1743
Small Arms Firing Hammer

009801743
7790803: RNCC: 3 | RNVC: 2
1005009801743: RNCC: 6 | RNVC: 9

1 Jan 1962

1005-00-978-1026
Sight Aperture

009781026
8448539: RNCC: 3 | RNVC: 2
61700: RNCC: 5 | RNVC: 2
1005-978-1026: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-01-003-2799
Ammunition Chute Section

010032799
201F698-2: RNCC: 1 | RNVC: 2
17549: RNCC: 3 | RNVC: 2
1221C17549: RNCC: 5 | RNVC: 9

16 Apr 1975

1005-00-999-8850
Gun Assembl Trigger

009998850
26345: RNCC: 3 | RNVC: 2

30 Mar 1966

1005-01-009-8228
Gun Seal Assembly

010098228
68A732039-1005: RNCC: 3 | RNVC: 2

17 Sep 1975

1005-01-029-9288
Re Adapter Assembly

010299288
537AS300: RNCC: 3 | RNVC: 2

26 Oct 1976

1005-01-029-5204
Transfer Assembly Housing

010295204
205F313: RNCC: 3 | RNVC: 2
205F313: RNCC: 5 | RNVC: 2
205F313: RNCC: 5 | RNVC: 2

17 Oct 1976

1005-01-032-8144
Back Plate

010328144
11826212: RNCC: 3 | RNVC: 2
3602008540: RNCC: 5 | RNVC: 2

23 Dec 1976

1005-00-139-5595
Elastic Cord

001395595
2866432-2: RNCC: 3 | RNVC: 2
7362: RNCC: 5 | RNVC: 2

18 Aug 1971

1005-00-280-0925
Feeder Sprocket Assembly

002800925
139C7970: RNCC: 3 | RNVC: 2

15 Aug 1973

1005-00-312-7177
Small Arms Sling

003127177
12002983: RNCC: 3 | RNVC: 2
1005003127177: RNCC: 5 | RNVC: 2
1005003127177: RNCC: 6 | RNVC: 9

26 Oct 1973

1005-00-450-2732
Fore-End

004502732
93766: RNCC: 3 | RNVC: 2
25450: RNCC: 5 | RNVC: 2
20088: RNCC: 5 | RNVC: 9
14563: RNCC: 5 | RNVC: 9

10 Dec 1969

1005-00-050-6357
Small Arms Cleaning Rod Section

000506357
8436775: RNCC: 3 | RNVC: 2
01VS3 IP100146C: RNCC: 5 | RNVC: 2
SP62705: RNCC: 5 | RNVC: 9
8436775: RNCC: 5 | RNVC: 9
719511000100: RNCC: 6 | RNVC: 9
1005000506357: RNCC: 6 | RNVC: 9

4 Dec 1967

1005-00-034-8051
Compression Helical Spring

000348051
8715751: RNCC: 3 | RNVC: 2
0740629: RNCC: 5 | RNVC: 2
A10689: RNCC: 5 | RNVC: 2
8715751: RNCC: 5 | RNVC: 9
1005000348051: RNCC: 6 | RNVC: 9
5360000348051: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-054-3186
Breechblock

000543186
135B5883: RNCC: 3 | RNVC: 2

20 May 1968

NSN 1005-00-061-5638 000615638 PINTLE,MOUNT

1005-00-061-5638
Mount Pintle

000615638
8436685: RNCC: 3 | RNVC: 2

15 Jun 1967

1005-00-072-5390
Shoul Rest Assembly

000725390
7791678: RNCC: 3 | RNVC: 2
7791678: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-275-5556
Ammunition Chute

002755556
0621D14234: RNCC: 3 | RNVC: 2
117D2204: RNCC: 7 | RNVC: 2

4 Aug 1973

1005-00-275-5727
Gun Mount

002755727
176F685: RNCC: 3 | RNVC: 2
68-730061-261: RNCC: 5 | RNVC: 2

4 Aug 1973

1005-00-276-7830
Drive Shaft Assembly

002767830
139C6608: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-275-5801
Gun End Assembly

002755801
1311C14224-5: RNCC: 3 | RNVC: 2
117D2215-2: RNCC: D | RNVC: 9

4 Aug 1973

1005-00-276-7890
Aft Sprocket Assembly

002767890
139C6531: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-279-0558
Wear Plate

002790558
176F558: RNCC: 3 | RNVC: 2

8 Aug 1973

1005-00-148-6469
Leg Pin Lock

001486469
11838648: RNCC: 3 | RNVC: 2

12 Oct 1973

NSN 1005-00-139-5607 001395607 BRACKET AND LOCK AS

1005-00-139-5607
Bracket And Lock As

001395607
2663052: RNCC: 3 | RNVC: 2

18 Aug 1971

1005-00-282-1644
Box End Assembly

002821644
1311C14222-3: RNCC: 3 | RNVC: 2
117D2215-1: RNCC: D | RNVC: 9

22 Aug 1973

1005-00-215-0036
Gun Wear Plate

002150036
175F132-2: RNCC: 3 | RNVC: 2

27 Apr 1973

1005-00-242-5687
Cylindrical Bottle Assembly

002425687
8448444: RNCC: 3 | RNVC: 2
8448445: RNCC: 5 | RNVC: 9

28 May 1970

1005-00-368-0370
Ammunition Drum

003680370
204R632: RNCC: 3 | RNVC: 2

27 Feb 1974

1005-00-250-0802
Gun Muzzle Seal Assembly

002500802
68A732013-1003: RNCC: 3 | RNVC: 2

13 Jun 1973

1005-00-477-5693
Hydraulic Drive Housing

004775693
K401-000558: RNCC: 3 | RNVC: 2

12 Jun 1974

1005-00-402-2455
B Retainer Assembly

004022455
11838587: RNCC: 3 | RNVC: 2

3 Apr 1970

1005-00-491-5479
Ammunition Chute Adapter

004915479
11838514: RNCC: 3 | RNVC: 2

6 Jun 1969

1005-00-498-2746
Resolver Support

004982746
101D4405: RNCC: 3 | RNVC: 2

6 Oct 1969

1005-00-516-3444
Chute Solid Section

005163444
11830873-104: RNCC: 1 | RNVC: 2
1212B15724: RNCC: 3 | RNVC: 2
205F192-104: RNCC: 5 | RNVC: 9
189F952-5: RNCC: 5 | RNVC: 9

11 Aug 1974

1005-00-533-6562
Gun Grip Safety

005336562
5336562: RNCC: 3 | RNVC: 2
A10924: RNCC: 5 | RNVC: 2

1 Jan 1963

1005-00-570-3694
Drum Cover Plug

005703694
139C6875-2: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3726
Feeder Mechanism Housing

005703726
198F221: RNCC: 3 | RNVC: 2
198F221: RNCC: 5 | RNVC: 2
198F221: RNCC: 5 | RNVC: 2

1 Dec 1974

1005-00-570-3750
Gun Retaining Plate

005703750
163B5863: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3794
Scoop Drive Assembly

005703794
125C3835: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-570-3852
Scoop Extension Cam Follower

005703852
105D3497: RNCC: 3 | RNVC: 2

1 Dec 1974

1005-00-650-7137
Tripod Mount Leg

006507137
6507137: RNCC: 3 | RNVC: 2
A10773: RNCC: 5 | RNVC: 2
717124412408: RNCC: 5 | RNVC: 9
1005PL0903663: RNCC: 6 | RNVC: 9
1005006507137: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-701-6793
Locking Block

007016793
7269955: RNCC: 3 | RNVC: 2
7269955: RNCC: 5 | RNVC: 9
1005007016793: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-699-9913
Rotor Gear

006999913
7268664: RNCC: 3 | RNVC: 2
196C644P1: RNCC: 5 | RNVC: 9
7268664: RNCC: 5 | RNVC: 9
1005PL0960390: RNCC: 6 | RNVC: 9

1 Jan 1963

1005-00-711-1799
Feed Assembly Retainer

007111799
7793099: RNCC: 3 | RNVC: 2

1 Jan 1963

1005-00-716-2097
Elevator Top Cover

007162097
7162097: RNCC: 3 | RNVC: 2
A20271: RNCC: 5 | RNVC: 2
7162097: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-731-2243
Driving Spring Assembly

007312243
7312243: RNCC: 3 | RNVC: 9
75F3010: RNCC: 8 | RNVC: 2

1 Jan 1963

1005-00-805-3367
Shoulder Gun Stock

008053367
502282J15117: RNCC: 3 | RNVC: 9
294370A: RNCC: 5 | RNVC: 9
200-626: RNCC: 5 | RNVC: 9
235103: RNCC: 5 | RNVC: 9

29 Mar 1968

1005-00-865-5243
Control Unit Seat

008655243
MC10845: RNCC: 3 | RNVC: 2
MC10845: RNCC: 5 | RNVC: 9

16 Oct 1967

1005-00-796-4436
Caliber .50 Spare Barrel Cover

007964436
7964436: RNCC: 3 | RNVC: 2
A20382: RNCC: 5 | RNVC: 2
A10712: RNCC: 5 | RNVC: 2

1 Jan 1962

1005-00-903-1041
Post Assembly Pintle

009031041
11699723: RNCC: 3 | RNVC: 9

1 Jan 1960

1005-00-903-1296
Small Arms Cleaning Brush

009031296
11686340: RNCC: 3 | RNVC: 2
M1LB20100: RNCC: 4 | RNVC: 1
SP94144: RNCC: 5 | RNVC: 2
711419702308: RNCC: 6 | RNVC: 9
5564179: RNCC: C | RNVC: 1

1 Jan 1960

1005-00-909-3031
Shock Cord Assembly

009093031
11699674-1: RNCC: 3 | RNVC: 2
H378-H376-147: RNCC: 5 | RNVC: 9
11699674: RNCC: D | RNVC: 9

1 Jan 1960

1005-00-922-2559
Ammunition Exit End

009222559
11690219: RNCC: 1 | RNVC: 2
S762-205-20: RNCC: 3 | RNVC: 2

17 Apr 1968

1005-00-922-4554
Gun Drive Assembly

009224554
216-29220-4: RNCC: 1 | RNVC: 2
905D504: RNCC: 3 | RNVC: 2

17 Apr 1968

1005-00-937-2247
Delinker Feede Gear

009372247
11686757: RNCC: 3 | RNVC: 9
DMG0603: RNCC: 5 | RNVC: 1
F8199-000174: RNCC: 6 | RNVC: 9
11686757: RNCC: C | RNVC: 1

18 May 1970

1005-00-922-8043
Insert

009228043
11701129: RNCC: 3 | RNVC: 9
DAFD0088: RNCC: 5 | RNVC: 1
DAFD0088: RNCC: 5 | RNVC: 2
F8199-000157: RNCC: 6 | RNVC: 9

25 Dec 1965

1005-01-003-2829
Ammunition Chute

010032829
201F698: RNCC: 1 | RNVC: 2
0621D17558: RNCC: 3 | RNVC: 2

16 Apr 1975

1005-01-018-8705
Magazine Cap

010188705
F102971: RNCC: 3 | RNVC: 2
F102971: RNCC: 5 | RNVC: 1
F102971: RNCC: 5 | RNVC: 2
25375: RNCC: 5 | RNVC: 9

31 Mar 1976

1005-00-051-1358
Sensor Arm

000511358
114C2714: RNCC: 3 | RNVC: 2
114C2714: RNCC: 5 | RNVC: 2

11 May 1967

1005-00-099-8242
Machine Gun Breech Lock Cam

000998242
8413040: RNCC: 3 | RNVC: 2
8413040: RNCC: 5 | RNVC: 9

1 Jan 1963

1005-00-083-0291
Mounting Plate

000830291
7792974: RNCC: 3 | RNVC: 2
1005000830291: RNCC: 6 | RNVC: 9

1 Jan 1963

Load More Results