What is Federal Supply Class 1005?

FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.

What is NATO Supply Classification Class 1005?

NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.

Which Federal Supply Group is FSC 1005 in?

FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.

Which NATO Supply Classification Group is NSC 1005 in?

NSC 1005is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).

What is a Compression Helical Spring?

A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Extension Helical Spring?

An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.

What is a Torsion Helical Spring?

A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.

What is an Aircraft Gun Mounting Adapter?

An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.

What is an Empty Cartridge Bag?

An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.

What is a Small Arms Cleaning Swab?

A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.

What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem?

A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).

What is a 20 Millimeter Automatic Gun?

A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a 30 Millimeter Automatic Gun?

A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.

What is a Caliber .38 Special Revolver?

A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.

What is a Machine Gun Bipod?

A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.

What is a Rifle Bipod?

A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.

A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).

What is a Rifle Mount?

A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.

What is a Machine Gun Tripod Mount?

A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.

What is a 12 Gage Shotgun?

A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.

What is a Riot Type 12 Gage Shotgun?

A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.

What is a Shoulder Gun Stock?

A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.

What is a Gun Stock Extension?

A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.

What is a Muzzle Brake?

A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.

What is a Flash Suppressor?

A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.

What is a Firing Pin?

A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.

What is a Gun Hand Guard?

A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.

What is a Shoulder Gun Stock Butt Plate?

A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.

A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.

What is a Breechblock?

A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.

What is a Blast Deflector?

A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.

What is a Cartridge Magazine?

A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.

A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.

What is a Sight Aperture?

A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.

What is a Front Sight Blade?

A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.

What is a Gunsight Cover?

A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.

What is a Front Sight?

A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.

What is a Rear Sight?

A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.

What is a Breech Bolt?

A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.

What is a Small Arms Cleaning Rod Swab Holder Section?

A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.

What is a Rifle Mount Tripod?

A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.

What is a Small Arms Sling?

A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.

What is a Small Arms Cleaning Brush?

A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.

What is a Small Arms Cleaning Rod?

A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.

What is a Small Arms Cleaning Rod Section?

A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.

What is a Recoil Mechanism Buffer?

A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.

What is a Small Arms Firing Hammer?

A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.

What is a Trigger Guard?

A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.

What is a Gun Safety Actuator?

A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).

What is a Trigger Housing?

A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.

Guns, through 30mm - United States (US)

Federal Supply Class (FSC): 1005

NATO Supply Classification Class (NSC): 1005

Federal Supply Group (FSG): 10 Weapons

NATO Supply Classification Group (NSG): 10 Weapons

Items Managed by United States (US) - NCB is 00 to 09

Page 71 of 125

NSN Format for Guns, through 30mm
Codified by United States

10	05	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 1005 refers to guns that are capable of firing ammunition up to and including 30mm in caliber. This class is part of NATO Supply Group 10, which is specifically designated for weapons.

Guns in this supply class are typically categorized as small arms and light weapons. They can include various types of firearms such as rifles, machine guns, submachine guns, and pistols. These guns are designed for use by military personnel and are commonly used in combat, law enforcement, and self-defense.

The NATO Supply Class 1005 for Guns, Through 30mm, covers a wide range of firearms that are used by NATO member countries. These guns are subject to specific standards and regulations set by NATO to ensure interoperability and compatibility among member nations.

It's important to note that the supply class and group classification system used by NATO helps to standardize the identification and categorization of military equipment and supplies. This allows for efficient logistics and procurement processes among NATO member countries.

If you need more specific information about a particular type of gun or any other details related to NATO Supply Class 1005, please let me know.

FSC 1005 Guns, through 30mm - United States (US)

Includes Machine Guns; Brushes, Machine Gun and Pistol.

Excludes Turrets, Aircraft.

Note-This group includes combat weapons as well as weapon-like noncombat items, such as line throwing devices and pyrotechnic pistols. Also included in this group are weapon neutralizing equipment, such as degaussers, and deception equipment, such as camouflage nets. Excluded from this group are fire control and night devices classifiable in groups 12 or 58.

Frequently Asked Questions(FAQ) for Federal Supply Class 1005

What is Federal Supply Class 1005?: FSC 1005 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 1005) in the USA for supply items codified in the category of Guns, through 30mm.
What is NATO Supply Classification Class 1005?: NSC 1005 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 1005 in the USA) for supply items codified in the category of Guns, through 30mm.
Which Federal Supply Group is FSC 1005 in?: FSC 1005 is in Federal Supply Group (FSG) 10 which contains Weapons.
Which NATO Supply Classification Group is NSC 1005 in?: NSC 1005 is in NATO Supply Classification Group (NSG) 10 which contains Weapons.

Supply Items Included in Federal Supply Class 1005

Cover,Turret Base 15 Items
What is a Knob? 21 Items: A Knob is an item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified).
What is a Compression Helical Spring? 147 Items: A Compression Helical Spring (SPRING,HELICAL,COMPRESSION) is an open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Extension Helical Spring? 13 Items: An Extension Helical Spring (SPRING,HELICAL,EXTENSION) is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE.
What is a Torsion Helical Spring? 37 Items: A Torsion Helical Spring (SPRING,HELICAL,TORSION) is an open-or close-wound coil spring consisting of one or more helical coils, wound from different shapes and types of material and finished at the ends, designed to exert pressure in a rotating direction around the coil axis. Excludes springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature) and SPRING, REINFORCING, HOSE.
What is an Aircraft Gun Mounting Adapter? 29 Items: An Aircraft Gun Mounting Adapter (ADAPTER,GUN MOUNTING,AIRCRAFT) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting in an aircraft to obtain a desired result. It may incorporate gun-firing, recoil-shock absorbing, or vibration dampener mechanisms.
What is an Empty Cartridge Bag? 31 Items: An Empty Cartridge Bag (BAG,EMPTY CARTRIDGE) is an item of flexible material with fasteners for attachment to a machine gun, antiaircraft gun, or other weapon for use as a container to receive expended cartridges during firing.
What is a Small Arms Cleaning Swab? 43 Items: A Small Arms Cleaning Swab (SWAB,SMALL ARMS CLEANING) is a piece of fabric, wick, twine, or the like, usually of cotton, of various shapes or lengths, designed for use with a PULLTHROUGH, SMALL ARMS CLEANING; or ROD, CLEANING, SMALL ARMS in the cleaning of small arms weapons.
What is a 7.62 Millimeter Machine Gun Helicopter Armament Subsystem? 11 Items: A 7.62 Millimeter Machine Gun Helicopter Armament Subsystem (ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MILLIMETER MACHINE GUN) is an armament subsystem designed for attachment of one or more MACHINE GUN, 7.62 MILLIMETER to a HELICOPTER (as modified).
Rifle,Caliber .22 52 Items
Rifle,Caliber .30 36 Items
Rifle,7.62 Millimeter 78 Items
Pistol,Caliber .22,Automatic 46 Items
Pistol,Caliber .45,Automatic 27 Items
What is a 20 Millimeter Automatic Gun? 28 Items: A 20 Millimeter Automatic Gun (GUN,AUTOMATIC,20 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 30 Millimeter Automatic Gun? 32 Items: A 30 Millimeter Automatic Gun (GUN,AUTOMATIC,30 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
Machine Gun,Caliber .50 39 Items
Machine Gun,7.62 Millimeter 61 Items
Revolver,Caliber .38 26 Items
What is a Caliber .38 Special Revolver? 23 Items: A Caliber .38 Special Revolver (REVOLVER,CALIBER .38 SPECIAL) is a revolver designed to chamber, fire and extract a CARTRIDGE, CALIBER .38 SPECIAL. Excludes REVOLVER, CALIBER .38.
What is a Machine Gun Bipod? 15 Items: A Machine Gun Bipod (BIPOD,MACHINE GUN) is an adjustable two-legged device attached to the muzzle end of a machine gun to serve as a support for the weapon during firing. Excludes MOUNT, GUN.
What is a Rifle Bipod? 55 Items: A Rifle Bipod (BIPOD,RIFLE) is an adjustable two-legged device attached to the muzzle end of a rifle to serve as a support for the weapon during firing. Excludes MOUNT, RIFLE.
What is a Gun Mount? 150 Items: A Gun Mount (MOUNT,GUN) is an item designed to support a gun. Excludes MOUNT, HOWITZER; MOUNT, MACHINE GUN; MOUNT, MORTAR; MOUNT, RIFLE; and MOUNT, TRIPOD (as modified).
What is a Rifle Mount? 62 Items: A Rifle Mount (MOUNT,RIFLE) is an item designed to support a rifle. Excludes MOUNT, GUN; MOUNT, HOWITZER and MOUNT, MORTAR.
What is a Machine Gun Tripod Mount? 14 Items: A Machine Gun Tripod Mount (MOUNT,TRIPOD,MACHINE GUN) is a three-legged device having a central socket or head and the necessary attachments for supporting a machine gun. Excludes MOUNT, GUN; and MOUNT, RIFLE.
Barrel,Carbine 15 Items
Barrel,Pistol 32 Items
Barrel,Rifle 82 Items
Barrel,Shotgun 45 Items
What is a 12 Gage Shotgun? 64 Items: A 12 Gage Shotgun (SHOTGUN,12 GAGE) is a manually operated, smooth bore, shoulder fired weapon. It may have a single-, double-, or multibarrel and it may be fired semiautomatically or successive rounds may be loaded into the chamber by slide action or manual insertion. Excludes SHOTGUN, 12 GAGE, RIOT TYPE.
What is a Riot Type 12 Gage Shotgun? 22 Items: A Riot Type 12 Gage Shotgun (SHOTGUN,12 GAGE,RIOT TYPE) is a manually-operated, slide action, repeating, hammerless, shoulder weapon having a solid frame. It is equipped with a bayonet attachment, hand guard, sling, and sling swivels.
What is a Shoulder Gun Stock? 120 Items: A Shoulder Gun Stock (STOCK,GUN,SHOULDER) is an item usually made of hardwood to which the barrel assembly and other parts of a shoulder-fired gun are attached. It is usually designed in one piece, but some items may have a wooden or metal section for the attachment of gun parts to which a metal STOCK EXTENSION, GUN is attached.
What is a Gun Stock Extension? 26 Items: A Gun Stock Extension (STOCK EXTENSION,GUN) is a metal item formed to fit the shoulder on one end and attached on the other end, to the frame or stock of a carbine, rifle, submachine gun or the like.
What is a Muzzle Brake? 45 Items: A Muzzle Brake (BRAKE,MUZZLE) is a short, cylindrical item mounted on the muzzle of an artillery weapon to retard the force of recoil. It has a centrally bored hole, through which the projectile passes, and one or more baffles.
What is a Flash Suppressor? 101 Items: A Flash Suppressor (SUPPRESSOR,FLASH) is a device attached to the muzzle of small arms and artillery weapons to reduce the flash resulting from the secondary burning of propellent gases. It has a centrally located hole, through which the projectile passes, and a series of fins attached to the mounting ring. See also SUPPRESSOR, SMALL ARMS WEAPON.
What is a Firing Pin? 161 Items: A Firing Pin (PIN,FIRING) is an item used in a firing mechanism of a gun, mine, bomb, fuze, projectile, or the like, which strikes and detonates a sensitive explosive to initiate an explosive train or a propelling charge.
What is a Gun Hand Guard? 98 Items: A Gun Hand Guard (GUARD,HAND,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit over the top of the barrel of a carbine or rifle and attached by metal fastening devices. It is shaped to fit the hand and to protect it during firing. Excludes FORE END, GUN.
What is a Shoulder Gun Stock Butt Plate? 49 Items: A Shoulder Gun Stock Butt Plate (PLATE,BUTT,SHOULDER GUN STOCK) is a formed metallic and/or non-metallic item attached by threaded or non-threaded fastener to the butt end of a STOCK, GUN SHOULDER.
Grip,Carbine 18 Items
Grip,Machine Gun 27 Items
Grip,Pistol 113 Items
Grip,Revolver 11 Items
Grip,Rifle 103 Items
What is a Sear? 95 Items: A Sear is an item so designed as to retain the firing mechanism of a gun in the cocked position and release it by a rotating or sliding motion.
What is a Breechblock? 42 Items: A Breechblock is a movable steel block in the mechanism of a breechloading gun that seals the breech opening of the barrel during firing. Excludes BOLT, AUTOMATIC WEAPON.
What is a Blast Deflector? 21 Items: A Blast Deflector (DEFLECTOR,BLAST) is a device attached to the muzzle of a gun, mortar, or to the sides of a rocket launcher designed to reduce the effects of the blast and obscuration following firing. It may or may not consist of an arrangement of baffles to divert the flow of propellant gases to the sides of the weapon.
What is a Cartridge Magazine? 195 Items: A Cartridge Magazine (MAGAZINE,CARTRIDGE) is a metallic spring-loaded container of rectangular cross-sectional shape designed to hold cartridges and to be inserted into the magazine well of a pistol, rifle, or machine gun. It is an integral part of a gun, capable of being removed from the magazine well, reloaded and reused. Excludes CLIP, CARTRIDGE.
What is a Trigger? 139 Items: A Trigger is an item/device, part of the firing mechanism, that actuates a firing pin or initiates an explosive train.
What is a Sight Aperture? 23 Items: A Sight Aperture (APERTURE,SIGHT) is an irregularly shaped adjustable mechanical item usually integral to a SIGHT, REAR. It functions as a peephole through which the sight at the opposite end of a gun is brought into view in aiming at a target or object.
What is a Front Sight Blade? 10 Items: A Front Sight Blade (BLADE,FRONT SIGHT) is a narrow metal strip mounted perpendicular to a base and integral to a SIGHT, FRONT.
What is a Gunsight Cover? 34 Items: A Gunsight Cover (COVER,GUNSIGHT) is a removable protective item designed to fit over a SIGHT, FRONT or a SIGHT, REAR.
What is a Front Sight? 107 Items: A Front Sight (SIGHT,FRONT) is a metallic bead, blade, post, or the like, attached on the muzzle end of military carbines, pistols, revolvers, rifles, shotguns, and other similar items as a sighting device. It may be provided with a hood or protective wings.
What is a Rear Sight? 142 Items: A Rear Sight (SIGHT,REAR) is an item attached to the breech end and integral to a carbine, machine gun, pistol, rifle, or the like. It may be a fixed or adjustable cross blade with a U-or V-shaped notch or aperture, or it may have elevation and windage adjustment knobs, slides, and graduated scales and be provided with aperture disks.
What is a Breech Bolt? 128 Items: A Breech Bolt (BOLT,BREECH) is a mechanism which closes the breech in a carbine, machine gun, rifle, and the like. It is designed to push a cartridge into the chamber of a gun by sliding action. It may contain the ejector, extractor, and/or firing pin. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Cleaning Rod Swab Holder Section? 16 Items: A Small Arms Cleaning Rod Swab Holder Section (SWAB HOLDER SECTION,SMALL ARMS CLEANING ROD) is an item designed for attachment to or as a section of a ROD, CLEANING, SMALL ARMS and used as a holder for a SWAB, SMALL ARMS CLEANING.
What is a Rifle Mount Tripod? 17 Items: A Rifle Mount Tripod (TRIPOD,RIFLE MOUNT) is a three-legged device with the legs attached to a ring assembly or head. It is designed to receive an adapter to hold or support a MOUNT, RIFLE. The adapter is not included.
What is a Small Arms Sling? 155 Items: A Small Arms Sling (SLING,SMALL ARMS) is a looped strap mounted on the underside of a shoulder fired weapon to provide the means for carrying the weapon or steadying the weapon for firing.
What is a Small Arms Cleaning Brush? 230 Items: A Small Arms Cleaning Brush (BRUSH,CLEANING,SMALL ARMS) is a brush specially designed for cleaning the bore, chamber, and the like, of a small arms weapon.
What is a Small Arms Cleaning Rod? 106 Items: A Small Arms Cleaning Rod (ROD,CLEANING,SMALL ARMS) is a cylindrical body used with a brush or cloth (swab), or other attachment, for cleaning the bore of a small arms firearm. See also STAFF SECTION, CLEANING, ARTILLERY. Excludes ROD SECTION, CLEANING, SMALL ARMS.
What is a Small Arms Cleaning Rod Section? 32 Items: A Small Arms Cleaning Rod Section (ROD SECTION,CLEANING,SMALL ARMS) is a round metal or wooden item, solid or tubular, used singly or as one of two or more similar items attachable end to end. It is designed for use as a section of a ROD, CLEANING, SMALL ARMS.
What is a Recoil Mechanism Buffer? 50 Items: A Recoil Mechanism Buffer (BUFFER,RECOIL MECHANISM) is a device or mechanism designed to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is a Small Arms Firing Hammer? 73 Items: A Small Arms Firing Hammer (HAMMER,FIRING,SMALL ARMS) is a metallic pivoted item, part of the firing mechanism of a firearm, designed to strike a firing pin or percussion cap and fire a gun.
What is a Trigger Guard? 48 Items: A Trigger Guard (GUARD,TRIGGER) is a protective device consisting of a curved framework, usually of metal, on a gun or LAUNCHER, ROCKET within which a TRIGGER is located.
What is a Gun Safety Actuator? 13 Items: A Gun Safety Actuator (ACTUATOR,GUN SAFETY) is a lever, plunger, slide, or the like, designed to apply force by spring or mechanical action to activate a SAFETY (as modified).
What is a Trigger Housing? 38 Items: A Trigger Housing (HOUSING,TRIGGER) is an item, usually metallic, designed to fit into the framework of a hand or shoulder-firing weapon. It is used to provide a mounting for a TRIGGER.
What is a Gun Grip Safety? 11 Items: A Gun Grip Safety (SAFETY,GUN GRIP) is an item designed to lock the trigger or other component in the firing mechanism of a small arms or artillery weapon by gripping action or by gripping and turning action.
What is a Small Arms Cleaning Brush Set? 23 Items: A Small Arms Cleaning Brush Set (BRUSH SET,CLEANING,SMALL ARMS) is a set of two or more BRUSH, CLEANING, SMALL ARMS designed for attachment to an integral handle.
What is a Gun Mount Cover? 35 Items: A Gun Mount Cover (COVER,GUN MOUNT) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun mount for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Gun Muzzle Cover? 17 Items: A Gun Muzzle Cover (COVER,GUN MUZZLE) is a fabricated removable textile, leather, or plastic cover specifically designed to fully or partially inclose a gun muzzle for protection from damaging elements such as moisture, dust and the like. It has means of securing to the equipment such as straps, tie lines, zipper fasteners and the like. Excludes TARPAULIN.
What is a Machine Gun Bipod Leg? 17 Items: A Machine Gun Bipod Leg (LEG,MACHINE GUN BIPOD) is an item which, in conjunction with a similar item, aids in the support of a MACHINE GUN (as modified), as a component of a BIPOD, MACHINE GUN.
What is a Rifle Bipod Leg? 11 Items: A Rifle Bipod Leg (LEG,RIFLE BIPOD) is an item which, in conjunction with a similar item, aids in the support of a RIFLE (as modified), as a component of a BIPOD, RIFLE. Excludes ARM, BIPOD, RECOILLESS RIFLE.
What is a Gun Safety Lock? 30 Items: A Gun Safety Lock (LOCK,GUN SAFETY) is an item activated only by a SAFETY (as modified) and designed to lock the hammer, SEAR; TRIGGER, or other components of the firing mechanism of a gun to prevent accidental discharge.
Safety,Small Arms 55 Items
What is a Gun Gas Cylinder? 31 Items: A Gun Gas Cylinder (CYLINDER,GAS,GUN) is a chamber, circular in cross section, fixed to the barrel of a gas operated automatic or semiautomatic weapon, such as a carbine, machine gun, rifle, and the like. The deflection of a part of the escaping powder gases puts in motion an integral piston to operate the extracting and reloading mechanism(s).
What is a Firing Pin Guide? 24 Items: A Firing Pin Guide (GUIDE,FIRING PIN) is a cylindrical or tubular item designed to maintain alignment of a PIN, FIRING.
What is a Gun Gas Cylinder Piston? 41 Items: A Gun Gas Cylinder Piston (PISTON,GUN GAS CYLINDER) is a cylindrical piece which moves or reciprocates under gas pressure in a CYLINDER, GAS, GUN. It is usually a single item, but may have facilities for attachment to an operating rod. Excludes threaded end types with an integral operating rod, for which, see ROD ASSEMBLY, OPERATING, GUN.
What is a Gun Operating Rod Assembly? 40 Items: A Gun Operating Rod Assembly (ROD ASSEMBLY,OPERATING,GUN) is a cylindrical item, tubular or solid, designed to transmit force or motion from a gas cylinder or the like of a machine gun, rifle or other automatic/manual gun to activiate the firing mechanism. It may have one or more integral parts with appropriate fastening devices, including a handle, head helical spring(s) plunger, yoke, and the like. Some types may include an integral piston.
What is a Blank Ammunition Firing Attachment? 39 Items: A Blank Ammunition Firing Attachment (FIRING ATTACHMENT,BLANK AMMUNITION) is an item attached to the flash suppressor or muzzle-end of a small arms weapon, such as a rifle or machine gun, or at the breech-end of an automatic gun, used with blank ammunition to simulate repetitive or self-loading action of automatic or semiautomatic weapons. It may include a breech shield to deflect breech gas or powder particles from the face of the shooter.
What is a Recoil Pad? 44 Items: A Recoil Pad (PAD,RECOIL) is a protective cushioning attached to the end of a shoulder fired weapon to absorb the shock of recoil.
What is a Gun Hand Guard And Stock Retaining Band? 11 Items: A Gun Hand Guard And Stock Retaining Band (BAND,RETAINING,GUN HAND GUARD AND STOCK) is a metallic item fitted over the barrel and gas cylinder of a shoulder fired gun. It is designed to retain the muzzle ends of the stock and hand guard in a fixed position. See also FERRULE, SHOULDER GUN STOCK.
What is a Gun Mount Leg? 15 Items: A Gun Mount Leg (LEG,GUN MOUNT) is an item which, in conjunction with similar items, aids, in the support of a gun, such as a machine gun. It is a component of a MOUNT, GUN; and is usually one of four legs.
What is a Tripod Mount Leg? 20 Items: A Tripod Mount Leg (LEG,TRIPOD MOUNT) is an item which, in conjunction with two similar items, aids in the support of a machine gun, recoilless gun, rifle or the like. It is a component of a MOUNT, TRIPOD (as modified); or a TRIPOD, RIFLE MOUNT; and may be a single or sectional item with an integral or nonintegral foot. Excludes LEG, GUN MOUNT. See also LEG SECTION, TRIPOD MOUNT.
What is a Tripod Mount Leg Section? 24 Items: A Tripod Mount Leg Section (LEG SECTION,TRIPOD MOUNT) is an item which in itself is not a complete functioning item. It consists of parts which, together with other similar parts, form a LEG, TRIPOD MOUNT.
What is an Automatic Gun Feeder? 58 Items: An Automatic Gun Feeder (FEEDER,AUTOMATIC GUN) is a device designed to pull cartridges from an ammunition belt or other container and to feed them into the chamber of an automatic gun. It may include a safety device to clear the weapon without expanding a complete load of an ammunition belt or container.
What is a Machine Gun Mount? 190 Items: A Machine Gun Mount (MOUNT,MACHINE GUN) is an item designed to support a machine gun. See also MOUNT, MACHINE GUN, TRAILER MOUNTED. Excludes MOUNT, GUN.
What is a Cartridge Receiver? 68 Items: A Cartridge Receiver (RECEIVER,CARTRIDGE) is an item, integral to a carbine, rifle, shotgun, or the like, designed to take charge from a MAGAZINE, CARTRIDGE or CLIP, MAGAZINE or a single cartridge or shell and hold it until chambered.
What is a Lock-Release Lever? 32 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Gun Mount Pedestal? 19 Items: A Gun Mount Pedestal (PEDESTAL,GUN MOUNT) is an item used as the supporting base for a gun mount or a machine gun mount. It excludes a cradle and/or pintle assembly.
Rifle,5.56 Millimeter 64 Items
What is a Cartridge Ejector? 80 Items: A Cartridge Ejector (EJECTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, or the like, which automatically throws out an empty cartridge case or unfired cartridge from the breech or receiver.
What is a Cartridge Extractor? 107 Items: A Cartridge Extractor (EXTRACTOR,CARTRIDGE) is a device in the breech mechanism of a gun, rifle, grenade launcher, or the like for (1) pulling an empty cartridge case or an unfired cartridge out of the chamber of the weapon, or (2) extracting a cartridge from a belt and positioning it for insertion into the chamber.
What is a Gun Carriage? 16 Items: A Gun Carriage (CARRIAGE,GUN) is a wheeled unit designed to support the breechlock and the tube or the cannon section of the gun. It consists of the top and bottom carriages, trails, and the elevating and traversing mechanisms.
What is an Access Cover? 45 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Mount Pintle? 98 Items: A Mount Pintle (PINTLE,MOUNT) is a forked or pinlike item used as a pivot on gun mounts, machine gun mounts and tripod mounts for lateral and/or vertical movement of machine guns, recoilless rifles, and the like. It may be drilled, grooved or slotted to accommodate a locking device. Excludes CLEVIS, ROD END; HOOK, PINTLE; and PINTLE ASSEMBLY, TOWING.
What is an Elevating And Firing Cradle Support? 23 Items: An Elevating And Firing Cradle Support (SUPPORT,ELEVATING AND FIRING CRADLE) is a metallic item, designed as a framework to support the elevating mechanism and the firing transfer housing of a weapon. It has facilities for the mounting of other components to it.
What is a Small Arms Sling Swivel? 82 Items: A Small Arms Sling Swivel (SWIVEL,SLING,SMALL ARMS) is an elongated D-shaped hinged device mounted on the underside of the stock and fore-end of a shoulder fired weapon to accommodate a SLING, SMALL ARMS.
What is a Gun Mount Pedestal Brace? 27 Items: A Gun Mount Pedestal Brace (BRACE,GUN MOUNT PEDESTAL) is a rigid item of various cross-sectional shapes, specifically designed to provide support and/or reinforcement to a gun mount pedestal.
Submachine Gun,9 Millimeter 27 Items
Pistol,9 Millimeter,Automatic 15 Items
What is a 25 Millimeter Automatic Gun? 14 Items: A 25 Millimeter Automatic Gun (GUN,AUTOMATIC,25 MILLIMETER) is a complete assembly consisting of a barrel, breech, and firing mechanisms designed to be fired from a mount on a self-propelled vehicle.
What is a 5.56 Millimeter Machine Gun? 13 Items: A 5.56 Millimeter Machine Gun (MACHINE GUN,5.56 MILLIMETER) is a machine gun used as an infantry weapon/automatic rifle (AR) and also may be used as a Squad Automatic Weapon (SAW). It can be fired from the shoulder, hand-held, or from a bipod steadied position. It may be equipped with a short barrel, collapsible buttstock, and/or may include an optics mounting facility. Excludes MACHINE GUN (1), LIGHT, 5.56 MILLIMETER.
Barrel,Machine Gun 70 Items
Barrel,Automatic Gun 68 Items
What is an Ammunition Box Magazine? 51 Items: An Ammunition Box Magazine (BOX MAGAZINE,AMMUNITION) is a metal boxlike item that holds ammunition and feeds it through a chute to the gun. For items specifically designed for attachment to a gun, see CHEST, AMMUNITION. Excludes BOX, AMMUNITION.
What is a Gun Cover? 71 Items: A Gun Cover (COVER,GUN) is a fabricated removable textile or plastic cover specifically designed to fully inclose a gun for protection from damaging elements such as moisture, dust and the like. It can be multi-sectional and has means of securing to the equipment in the form of straps, tie lines and the like. Excludes TARPAULIN.
What is an Automatic Weapon Bolt? 28 Items: An Automatic Weapon Bolt (BOLT,AUTOMATIC WEAPON) is an item consisting of a bolt carrier, a breech bolt, a top plate, and a locating pin. It replaces a breech bolt in a rifle or machine gun to alter the operation of the weapon from gas to blow-back so that low-powered practice ammunition may be used. It is not intended for non-practice usage. Excludes BOLT, BREECH and BREECHBLOCK.
What is a Machine Gun Electronic Control Unit? 42 Items: A Machine Gun Electronic Control Unit (CONTROL UNIT,ELECTRONIC,MACHINE GUN) is an item which electronically determines the mode of operation of an automatic machine gun.
What is a 5.56 Millimeter Carbine? 24 Items: A 5.56 Millimeter Carbine (CARBINE,5.56 MILLIMETER) is a small arms weapon with a short barrel and stock, magazine-fed, gas operated, 3-round burst or semiautomatic, which is usually fired from the shoulder. See also RIFLE (as modified).
What is a Gun Charger? 19 Items: A Gun Charger (CHARGER,GUN) is an item designed to energize a GUN, AUTOMATIC (as modified). It is attached to the weapon and automatically chambers the first round.
What is an Ammunition Chute Support? 45 Items: An Ammunition Chute Support (SUPPORT,CHUTE,AMMUNITION) is an item specifically designed for a CHUTE (1), AMMUNITION.
What is an Automatic Gun Stop? 39 Items: An Automatic Gun Stop (STOP,GUN,AUTOMATIC) is an item designed to check the movement or action of a gun.
What is a Mounting Bracket? 99 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Ammunition Chute Assembly? 136 Items: An Ammunition Chute Assembly (CHUTE ASSEMBLY,AMMUNITION) is an assembly through which ammunition is supplied to the gun or cannon preparatory to and after firing. It may include a CHUTE, AMMUNITION; CHUTE EJECTION; guides, trays and the like.
What is an Ammunition Conveyor? 41 Items: An Ammunition Conveyor (CONVEYOR,AMMUNITION) is a device used to transfer cartridges from the ammunition can, container, drum or the like to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Ammunition Conveyor Element? 37 Items: An Ammunition Conveyor Element (CONVEYOR ELEMENT,AMMUNITION) is a part of a CONVEYER, AMMUNITION which aligns the cartridges as they are transferred to the FEEDER, AMMUNITION, MACHINE GUN-AUTOMATIC GUN.
What is an Armament System Electrical Control Box? 34 Items: An Armament System Electrical Control Box (CONTROL BOX,ELECTRICAL,ARMAMENT SYSTEM) is a metal or plastic enclosure which includes, mounts and protects any quantity and/or combinations of electrical devices, such as switches, resistors, relays, meters, rectifiers, fuses, overload indicators, bridges, terminal boards as well as wirings and the like. It is specifically designed to control, protect, secure, measure, and switch the armament system for which the item is designed.
What is a Machine Gun Ammunition Drum? 11 Items: A Machine Gun Ammunition Drum (DRUM,AMMUNITION,MACHINE GUN) is a cylindrical item made of metal and rotating around an axis; the item has several concentric holes into which the cartridges are inserted from the automatic ammunition feed, are brought into firing position and fired.
What is a Gun Fore End Stock? 41 Items: A Gun Fore End Stock (STOCK,FORE END,GUN) is an item made of wood or plastic usually designed with a semicircular groove to fit under the barrel of a gun and attached by metal fastening devices. It is shaped to fit the hand and is used to steady the weapon during firing. Excludes GUARD, HAND, GUN.
What is a Gun Parts Kit? 215 Items: A Gun Parts Kit (PARTS KIT,GUN) is a parts kit used to service gun(s). It may contain such items as washer(s), spring(s) and the like.
What is a Gun Maintenance Kit? 22 Items: A Gun Maintenance Kit (MAINTENANCE KIT,GUN) is a maintenance kit consisting of an extractor spindle, hand hook for cartridge removing, striker or the like.
What is a Weapon Gun Modification Kit? 72 Items: A Weapon Gun Modification Kit (MODIFICATION KIT,GUN,WEAPON) is an item or collective items employed to modify weap0ns.
What is a Flash Suppressor Retainer? 10 Items: A Flash Suppressor Retainer (RETAINER,SUPPRESSOR,FLASH) is a U-shaped item designed to position and retain a SUPPRESSOR, FLASH in its normal mounted position.
What is a Small Arms Release? 27 Items: A Small Arms Release (RELEASE,SMALL ARMS) is an item which, when pressed manually, actuates a release mechansism for a weapon accessory, such as rifle magazine or bayonet locking stud. It may be round or oval and may have textured grip surface(s). Excludes SAFETY (1), SMALL ARMS.
What is a Cartridge Stop? 22 Items: A Cartridge Stop (STOP,CARTRIDGE) is a metal, wedge shaped item designed to prevent overfeeding of the cartridge by restricting its sideward movememt to a postition of exact alignment for forward insertion into a chamber.
What is an Ammunition Drum Assembly? 42 Items: An Ammunition Drum Assembly (DRUM ASSEMBLY,AMMUNITION) is an item which is an integral part of an aircraft. It stores ammunition until it is ready to be used, loads it into the machine gun, and may receive and store the spent rounds. It includes such items as exit and entrance units, gears, drive units, conveyor assemblies, and the like.
What is a Weapons Ammunition Handling System? 14 Items: A Weapons Ammunition Handling System (HANDLING SYSTEM,AMMUNITION,WEAPONS) is this unit consists of several items (drum unit and exit and entrance units, chutes, conveyor, hydraulic drive etc.) which process the ammunition aboard the aircraft and supply the on board weapons and eject the used cartridges.
What is a Bolt Carrier? 68 Items: A Bolt Carrier (CARRIER,BOLT) is an item which supports and aligns the bolt and firing pin of a small arm weapon or automatic weapon(s) system. Excludes BOLT, AUTOMATIC WEAPON.
What is a Small Arms Receiver? 34 Items: A Small Arms Receiver (RECEIVER,SMALL ARMS) is the structured framework for pistols and revolvers designed to support the integral working components. This item has the serial number by which a weapon is identified.
What is a Mechanical Sight Unit? 12 Items: A Mechanical Sight Unit (SIGHT UNIT,MECHANICAL) is a unit comprised of a diopter with vertical and lateral boresighting facilities, a rubber antiglare device, a front sight post, and various front sights and mounting tools. The item is required for training, practice and live-firing exercises with light guns.
What is an Ammunition Cartridge Guide? 213 Items: An Ammunition Cartridge Guide (GUIDE,CARTRIDGE,AMMUNITION) is an item of various shapes mounted inside an ammunition handling system to guide the linked ammunition through the system and to the gun for firing.
What is an Ammunition Feeder Shaft? 17 Items: An Ammunition Feeder Shaft (SHAFT,FEEDER,AMMUNITION) is a single or multiple-piece item provided with star wheels or cams in different shapes and designed for feeding machine gun ammunition in parallel to the rammer.
What is a Machine Gun Housing? 49 Items: A Machine Gun Housing (HOUSING,MACHINE GUN) is a single or multiple-piece housing designed to inclose, position and align machine gun components.
What is a Conveyor Tensioner? 10 Items: A Conveyor Tensioner (TENSIONER,CONVEYOR) is an item used to maintain the tension of a CONVEYOR, AMMUNITION for the smooth transfer of ammunition.
What is a Protective Shield Assembly? 20 Items: A Protective Shield Assembly (SHIELD ASSEMBLY,PROTECTIVE) is an item specifically designed to be placed around the barrel of the weapon for the purpose of shielding the operator from misfiring, powder blast, ejected shells, etc. It is constructed of rigid material of various shapes and sizes, and may include mounting facilities.
What is a Crew-Served Weapon Elevating And Traversing Mechanism? 42 Items: A Crew-Served Weapon Elevating And Traversing Mechanism (ELEVATING AND TRAVERSING MECHANISM,CREW-SERVED WEAPON) is a device for elevating and traversing a weapon to its desired firing position.
What is a Recoil Rail Assembly? 24 Items: A Recoil Rail Assembly (RAIL ASSEMBLY,RECOIL) is an item consisting of a rail, bearing strip, bearings and the like. It is used to interface the cannon to the cradle.
What is an Elevation Firing Stop? 43 Items: An Elevation Firing Stop (STOP,ELEVATION FIRING) is a mechanically operated device designed to prevent the weapon from firing above a certain elevation.
What is a Small Arms Sight Mount? 118 Items: A Small Arms Sight Mount (MOUNT,SIGHT,SMALL ARMS) is a device permanently affixed to a weapon to be used with interchangeable sights.
What is a Gun Cleaning Kit? 136 Items: A Gun Cleaning Kit (CLEANING KIT,GUN) is a collection of items including rods, brushes, swabs, solvents, lubricants and the like, specifically designed for the basic maintenance of weapons.
What is a Magazine Catch Retainer? 18 Items: A Magazine Catch Retainer (RETAINER,CATCH,MAGAZINE) is a component which has a primary function of retaining and/or covering another assembly which controls a MAGAZINE, CARTRIDGE or CLIP, CARTRIDGE on a weapon (rifle/pistol).
What is a Pistol Slide? 29 Items: A Pistol Slide (SLIDE,PISTOL) is a u-shaped recoiling item fitted onto a semi-automatic/automatic pistol for manually chambering a cartridge and serving as a housing for sight attachment.
What is a Recoil Spring Guide? 34 Items: A Recoil Spring Guide (GUIDE,RECOIL SPRING) is a component or assembly used as a means of limiting/eliminating buckling of a pistol/gun recoil spring during the firing cycle. It is usually a pin or tube of uniform diameter over most of its length with provision at one end to retain or capture one end of the recoil spring.
What is a Disassembly Lever? 11 Items: A Disassembly Lever (LEVER,DISASSEMBLY) is a lever-driven part or assembly which allows disassembly of two or more normally joined components such as the slide and receiver groups in a PISTOL (as modified).
What is a Locking Insert? 33 Items: A Locking Insert (INSERT,LOCKING) is a component or assembly which, as part of a larger assembly, is used to lock one or more adjacent members into a desired configuration/relationship during a functioning cycle such as the firing cycle of a gun/pistol.
What is a Slide Stop? 12 Items: A Slide Stop (STOP,SLIDE) is a component or assembly which engages a SLIDE, PISTOL at full recoil during the firing cycle to prevent the slide from closing when the gun's magazine is empty.
What is a Trigger Bar? 26 Items: A Trigger Bar (BAR,TRIGGER) is a component or assembly which transfers motion from a gun's TRIGGER to other firing-cycle components such as a sear and/or HAMMER, FIRING (as modified).
What is a Hammer Strut? 12 Items: A Hammer Strut (STRUT,HAMMER) is a component or assembly which transfers force between a HAMMER, FIRING (as modified) and the spring system used to store and/or release energy to the firing pin activator during the firing cycle.
What is a Magazine Catch? 43 Items: A Magazine Catch (CATCH,MAGAZINE) is a manually or automatically operated quick release component or assembly used to secure a MAGAZINE, CARTRIDGE in a weapon.
What is a Gun Component Retainer? 256 Items: A Gun Component Retainer (RETAINER,GUN COMPONENT) is an item specifically designed to position and/or restrain the movement of one or more parts in their normal mounting position on a gun or associated equipment.
What is a Machine Gun Feed Mechanism Cover? 30 Items: A Machine Gun Feed Mechanism Cover (COVER,FEED MECHANISM,MACHINE GUN) is a metallic item which provides access to the breech and feed mechanism of a belt-fed machine gun. Excludes COVER, BREECH.
What is a Gun Charger Handle? 44 Items: A Gun Charger Handle (HANDLE,GUN CHARGER) is a hand-operated device which activates a CHARGER, GUN. It is usually spring-loaded so that a plunger enters a cavity in a bolt and draws it back from the breech. Excludes LEVER, LOCK-RELEASE.
What is a Gun Carrying Handle? 16 Items: A Gun Carrying Handle (HANDLE,GUN CARRYING) is a component functioning as a handhold on a rifle or other gun system.
What is a Rear Sight Base? 23 Items: A Rear Sight Base (BASE,REAR SIGHT) is an item specifically designed as a foundation or part upon which associated parts, such as cross blade, sight leaf, or aperture, for a gunsight are mounted. It is attached to the receiver or gun barrel and essential to a carbine, machine gun, pistol, rifle or the like when aiming.
What is a Gun Mounting Adapter? 47 Items: A Gun Mounting Adapter (ADAPTER,GUN MOUNTING) is an adapter of various designs with provisions to facilitate connection of a gun or guns to a mounting to obtain a desired result. It may incorporate gun-firing, recoil-shock, absorbing, or vibration dampener mechanisms.
What is a Machine Gun Cover Assembly? 40 Items: A Machine Gun Cover Assembly (COVER ASSEMBLY,MACHINE GUN) is a fabricated metallic or plastic assembly of various shapes, specifically d esigned to fully or partially enclose machine gun components, retain and guide ammunition. It may be attached by bolt holes, slots, tabs, mounting ears, pins and the like.
What is a Machine Gun Cradle Yoke? 21 Items: A Machine Gun Cradle Yoke (YOKE,CRADLE,MACHINE GUN) is an item consisting of a two-flanged head for attachment to a machine gun which will transmit traverse/elevation movement relative to the main mount to the machine gun.
What is a Small Arms Extractor Spring Assembly? 31 Items: A Small Arms Extractor Spring Assembly (SPRING ASSEMBLY,EXTRACTOR,SMALL ARMS) is an item that serves as an actuating device for an extracting mechanism which dislodges a spent cartridge from the chamber.
What is an Ammunition Drum Assembly Partition? 92 Items: An Ammunition Drum Assembly Partition (PARTITION,DRUM ASSEMBLY,AMMUNITION) is an item that provides support and/or guidance for ammunition through a DRUM ASSEMBLY, AMMUNITION.
What is an Ammunition Handling Sprocket? 31 Items: An Ammunition Handling Sprocket (SPROCKET,AMMUNITION HANDLING) is a toothed wheel like device designed to feed, handoff and/or extract ammunition in a DRUM ASSEMBLY,AMMUNITION.
What is a Rail Protector? 38 Items: A Rail Protector (PROTECTOR,RAIL) is a preformed item specifically designed to protect an accessories attachment rail on rifles,machine guns and pistols.
What is a Trigger Assembly? 80 Items: A Trigger Assembly is an item consisting of a TRIGGER and all associated hardware such as springs, pins, spacers, cams, and the like. It is a component, for a rifle, machine gun, pistol or related weapon system, used to actuate a firing pin or initiate an explosive train.
What is a Buttstock Assembly Body? 27 Items: A Buttstock Assembly Body (BODY,BUTTSTOCK ASSEMBLY) is a metallic or non-metallic component of a buttstock assembly to which a BUTT PLATE ASSEMBLY, SHOULDER GUN STOCK is attached.
What is a Weapon Mounting Kit? 12 Items: A Weapon Mounting Kit (MOUNTING KIT,WEAPON) is a collection of items specifically designed for mounting one weapon onto another which allows the use of both weapons.
What is a Weapon Mounted Adapter Rail? 200 Items: A Weapon Mounted Adapter Rail (ADAPTER RAIL,WEAPON MOUNTED) is a device that provide(s) rail type mounting surfaces on a rifle, carbine, machine gun or pistol. The mounting surfaces will allow the attachment of various accessories to the weapon which may include forward pistol grips(s), flashligt(s), various sighting devices, and the like. It may/may not be permanently mounted.
What is a Bolt Gas Port? 10 Items: A Bolt Gas Port (GAS PORT,BOLT) is an item attached to the bolt or bolt carrier of a gas-operated firearm. This part provides a means to transfer gas generated in the barrel to the bolt for energy to operate the bolt.
What is an Ammunition Feed Pawl? 35 Items: An Ammunition Feed Pawl (PAWL,AMMUNITION FEED) is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to allow ammunition flow into a small caliber weapon and inhibit reverse flow. Item is so pivoted that the angle of aproach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring activated to cause engagement. Excludes CAM (as modified).
What is an Aircraft Gun Drive Unit? 16 Items: An Aircraft Gun Drive Unit (DRIVE UNIT,GUN,AIRCRAFT) is an item that provides the power to rotate or operate the gun system. This item may be electrical, hydraulic or pneumatic or any combination thereof.
Rifle,Target 25 Items
Pistol,Target 27 Items
What is an Ammunition Transfer Unit? 22 Items: An Ammunition Transfer Unit (TRANSFER UNIT,AMMUNITION) is an item designed to feed ammunition during the firing or cycling of the gun and remove spent cases or unfired ammunition from the gun.
What is a Gun System Exit Unit? 11 Items: A Gun System Exit Unit (EXIT UNIT,GUN SYSTEM) is an item containing gears,sprockets,and the like that removes live rounds and expended cases from a DRUM ASSEMBLY,AMMUNITION and places them in conveyor elements.
What is a Scoop Disc Assembly? 14 Items: A Scoop Disc Assembly is an item mounted on a DRUM ASSEMBLY,AMMUNITION that provides positive control of rounds/spent cases during transfer to or from the drum covers.
What is an Ammunition Drum Structure Assembly? 12 Items: An Ammunition Drum Structure Assembly (STRUCTURE ASSEMBLY,DRUM,AMMUNITION) is a group of specially designed items that make up the outer section of a DRUM,ASSEMBLY,AMMUNITION.
What is an Automatic Gun Rotor? 19 Items: An Automatic Gun Rotor (ROTOR,GUN,AUTOMATIC) is the major component of an automatic gun that provides a mounting point for the BOLT,BREECH and the like.
What is a Multiple Magazine Holder? 16 Items: A Multiple Magazine Holder (HOLDER,MULTIPLE MAGAZINE) is a device that holds two or more amunition magazines for rifles,pistols,or shotguns. The device must be able to hold all the magazines while one magazine is in use on the weapon. It is detachable from the weapon.
What is a Small Arms Travel Lock? 17 Items: A Small Arms Travel Lock (LOCK,TRAVEL,SMALL ARMS) is a device designed to lock a weapon in a stationary position during transit or storage. It may or may not include necessary attachments for mounting.
What is a Cartridge Magazine Kit? 21 Items: A Cartridge Magazine Kit (MAGAZINE KIT,CARTRIDGE) is a kit consisting of a carrying pouch and a MAGAZINE, CARTRIDGE. It may contain a speed loading device, tool(s) for maintenance on the kit and other associated items.
What is a Small Arms Cleaning Pull Through? 33 Items: A Small Arms Cleaning Pull Through (PULL THROUGH,SMALL ARMS CLEANING) is a flexible or semi rigid item designed to be used with a SWAB, SMALL ARMS CLEANING for cleaning the bores of small arms weapons. It may or may not have a handle. Excludes CHAIN, CLEANING, SMALL ARMS.
What is a Heatshield Assembly? 12 Items: A Heatshield Assembly is an item to allow heat to dissipate equally, to prevent a mirage of heat. The item acts as a protector to prevent burning of the skin. It may be made of plastic and/or metal. The item attaches to the barrel or receiver of a rifle or maching gun and may have other items attached such as scope or sighting devices.
What is a Subassembly Buttstock? 80 Items: A Subassembly Buttstock (BUTTSTOCK,SUBASSEMBLY) is an item consisting of parts that make up an assembly or sub-assembly of a shoulder-fired Buttstock. An item usually made of hardwood, plastic or metal to which other parts of a shoulder-fired gun are attached, such as sling, receiver, buttstock plate, retaining ring, buttstock bushings, screws, etc.
What is an Ejection Cover? 11 Items: An Ejection Cover (COVER,EJECTION) is an item used to cover an ejection port or opening of a rifle or machine gun to keep out dust, dirt, and the like. May be made of metal or plastic.
What is a Small Arms Release Lever? 20 Items: A Small Arms Release Lever (LEVER,RELEASE,SMALL ARMS) is a manually operated lever, designed to secure another item, such as a barrelassembly, or hold another assembly in position, such as a folding or adjustable buttstock assembly, and when activated, releases the item to facilitate adjustment or removal. It is a component of a spring-loaded or cam pressure mechanism. Excludes RELEASE (1), SMALL ARMS.
What is a Small Arms Fire Control Selector? 24 Items: A Small Arms Fire Control Selector (SELECTOR,FIRE CONTROL,SMALL ARMS) is an item designed to choose between firing modes of a carbine, machine gun, submachine gun, automatic rifle or other similar weapons. Modes of fire could include safe (no fire), semi-automatic burst (two (2) or more round burst), and automatic. Modes of fire could be between calibers of a single weapon such as between a bullet and grenade or a rifle round and a shotgun round. It is a component of the firing mechanism. Differentiated from ACUATOR, GUN SAFETY and SAFETY by allowing more than a fire/no fire choice.
What is a Bracket Barrel Catch? 11 Items: A Bracket Barrel Catch (CATCH,BARREL,BRACKET) is an item used in operating a quick release component or assembly to secure or lock a barrel.
What is an Ammunition Loader Assembly? 24 Items: An Ammunition Loader Assembly (LOADER ASSEMBLY,AMMUNITION) is a device which loads ammunition into a gun or gun system. It may be motorized or manually operated.
What is a Muzzle Clamp Assembly? 21 Items: A Muzzle Clamp Assembly (CLAMP ASSEMBLY,MUZZLE) is an item positioned at the forward end of the barrels of a GUN, AUTOMATIC (as modified) and used to restrain individual barrel movement.
What is an Ammunition Chute Section? 37 Items: An Ammunition Chute Section (CHUTE SECTION,AMMUNITION) is an item which is a component of a CHUTE, AMMUNITION.
What is an Ejection Chute Section? 25 Items: An Ejection Chute Section (CHUTE SECTION,EJECTION) is an item which is a component of a CHUTE, EJECTION
What is an Automatic Gun Body Assembly? 11 Items: An Automatic Gun Body Assembly (BODY ASSEMBLY,GUN,AUTOMATIC) is a subassembly of a GUN, AUTOMATIC (as modified). It may contain a rotor, housing, breech, bolts and the like. It may contain the barrels.
What is an Ammunition Bracket Adapter? 24 Items: An Ammunition Bracket Adapter (ADAPTER,AMMUNITION BRACKET) is an item that holds ammunition used for various operations of a weapon system whether in cans, links, boxes, etc. The ammunition may or may not be latched, hooked or bolted down to the bracket. It may be part of a weapon system or a mount.
What is a Forward Track Assembly? 12 Items: A Forward Track Assembly (TRACK ASSEMBLY,FORWARD) is an item specifically designed to provide a track for the gun bolt carrier assembly to slide upon as it loads/extracts rounds into/from the breech.
What is an Automatic Gun Receiver? 75 Items: An Automatic Gun Receiver (RECEIVER,AUTOMATIC GUN) is the automatic gun receiver is an item that contains or provides attachment for all automatic gun components. The receiver assembly rams and fires rounds. The receiver completes all basic firing function: extract, cock, chamber, lock, fire,unlock and eject. It also suppresses the recoil force from barrel and breech assembly.
What is a Recoil Buffer Assembly? 34 Items: A Recoil Buffer Assembly (BUFFER ASSEMBLY,RECOIL) is an item consisting of a BUFFER, RECOIL MECHANISM and associated components required to absorb and check the recoil or counterrecoil force of a weapon when it is fired.
What is an Ammunition Chute? 321 Items: An Ammunition Chute (CHUTE,AMMUNITION) is a chute through which ammunition is supplied to the gun or cannon preparatory to firing.
What is an Ejection Chute? 123 Items: An Ejection Chute (CHUTE,EJECTION) is a chute through which the link or case is expelled from the gun or cannon.
What is a Cocking Breechblock Lever? 22 Items: A Cocking Breechblock Lever (LEVER,BREECHBLOCK,COCKING) is a lever that activates the firing pin. It is one of the component parts of the breechblock of an artillery weapon.
What is a Loader-Rammer Lever? 11 Items: A Loader-Rammer Lever (LEVER,LOADER-RAMMER) is a mechanically activated lever, designed to feed ammunition into the gun breech from the magazine. It is one of the component parts of the loader-rammer of an artillery weapon.
What is a Gun Silencer? 34 Items: A Gun Silencer (SILENCER,GUN) is an item specifically designed to silence the explosive report(s) caused by the discharge of cartridges by the small arms weapon(s). It incorporates integral chambers and/or baffles which allow the gases to expand gradually. The item may be jacketed. For items that reduce other characteristics in addition to sound, see SUPPRESSOR, SMALL ARMS WEAPON.
What is a Bipod Yoke? 14 Items: A Bipod Yoke (YOKE,BIPOD) is a device consisting of a two-flanged head for the attachment of the legs of a bipod of a machine gun, rifle or similar weapon. It usually includes two jaws incorporating quick-release features for connection or disconnection from a weapon.
What is a Hydraulic Drive Unit? 16 Items: A Hydraulic Drive Unit (DRIVE UNIT,HYDRAULIC) is a variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
What is a Flat Spring? 13 Items: A Flat Spring (SPRING,FLAT) is a spring made of flat or prebent strip metal. It is designed to apply force in one direction when deflected in the opposite direction. It must be capable of recovering size or shape after deformation. Excludes SPRING (1), LEAF; and springs designed for thermal actuation (springs in which the torsion forces are counteracted by changes in temperature).
What is a Gun Firing Mechanism? 16 Items: A Gun Firing Mechanism (FIRING MECHANISM,GUN) is an item designed to detonate a sensitive explosive to initiate an explosive train or propelling charge by percussion and/or electrical means. It is mounted on or within the BREECHBLOCK of a GUN (as modified). Excludes HOWITZER, (as modified); RIFLE, RECOILLESS, (as modified); and MORTAR (as modified). See also PIN, FIRING.
What is a Link-Cartridge Case Deflector? 39 Items: A Link-Cartridge Case Deflector (DEFLECTOR,LINK-CARTRIDGE CASE) is a metallic item of various shapes designed to deflect the empty cases and metallic links in a desired direction from machine guns, grenade launchers and the like.
What is an Ammunition Feed Electrohydraulic Drive Assembly? 35 Items: An Ammunition Feed Electrohydraulic Drive Assembly (DRIVE ASSEMBLY,ELECTROHYDRAULIC,AMMUNITION FEED) is a variable shaped item specifically designed to feed ammunition from either the left or right side of a housing, which is designed for remote control operation. It may or may not be synchronized with the rotor mechanism in moving the linked ammunition from the ammunition chute into the receiver chamber of a weapon.
What is an Ammunition Chute Adapter? 68 Items: An Ammunition Chute Adapter (ADAPTER,AMMUNITION CHUTE) is a metallic or plastic device specifically designed to facilitate connection and provide accommodation of ammunition to be injected or ejected through a chute, to or from the firing mechanism of machine guns, rapid firing grenade launchers, and the like.
What is an Electrohydraulic Drive Unit? 12 Items: An Electrohydraulic Drive Unit (DRIVE UNIT,ELECTROHYDRAULIC) is a constant speed drive consisting of a gear box and electric motor, one or more servo amplifiers (servomotors), and gears, integrally mounted and designed to convert electrohydraulic energy into output shaft torque. The torque output (rotating speed) of the drive depends on the frequency of the power pulses applied through its control assembly.
What is a Breechblock Handle? 12 Items: A Breechblock Handle (HANDLE,BREECHBLOCK) is a device designed to actuate the rotating mechanism of the breechblock carrier and to swing the breechblock out of its recess in the barrel.
What is a Machine Gun Cradle? 65 Items: A Machine Gun Cradle (CRADLE,MACHINE GUN) is an item designed to support and balance a machine gun. It has facilities for attachments to the yoke and/or traversing and elevating mechanism by means of bolts and locking pins.
What is a Barrel Locking Lever? 10 Items: A Barrel Locking Lever (LEVER,BARREL LOCKING) is a rigid, manually operated lever attached to a locking pin, designed to lock and/or release a quick change type barrel of a weapon.
What is a Small Arms Cartridge Follower? 28 Items: A Small Arms Cartridge Follower (FOLLOWER,CARTRIDGE,SMALL ARMS) is a metallic item designed to position each round of ammunition so that it can be inserted into the firing chamber of a firearm. It may or may not be an integral part of the magazine or of the firearm.
What is a Small Arms Cartridge Guide? 49 Items: A Small Arms Cartridge Guide (GUIDE,CARTRIDGE,SMALL ARMS) is a metallic item designed to retain and control the position of each round of ammunition being inserted into the firing chamber of a firearm. It may or may not be used in conjunction with a FOLLOWER, CARTRIDGE, SMALL ARMS.
What is a Pintle Lock Handle? 13 Items: A Pintle Lock Handle (HANDLE,PINTLE LOCK) is a cylindrical, metallic item, usually L-shaped and manually operated. When rotated, it locks the PINTLE, MOUNT to prevent its lateral movement when not in use. Reverse rotation of the handle causes the notched portion on one side of it to mate with the slot or groove of the PINTLE, MOUNT, freeing the pintle for lateral movement of the gun.
What is a Machine Gun Breech Lock Cam? 17 Items: A Machine Gun Breech Lock Cam (CAM,BREECH LOCK,MACHINE GUN) is an irregulary shaped device, designed to assist a breechlock in locking or unlocking the barrel extension to or from the bolt of a weapon, during the firing and recoil operation.
What is a Machine Gun Breech Lock? 29 Items: A Machine Gun Breech Lock (LOCK,BREECH,MACHINE GUN) is an item which is an integral part of the barrel extension group of a weapon. It is designed to prevent the loss of gas pressure, by locking the barrel extension to the bolt during firing.
What is a Machine Gun-Automatic Gun Ammunition Feeder? 26 Items: A Machine Gun-Automatic Gun Ammunition Feeder (FEEDER,AMMUNITION,MACHINE GUN-AUTOMATIC GUN) is a bellmouth shaped device, designed to facilitate the feeding of ammunition from an ammunition storage container, into the feeder chute. It may or may not change the directional flow of the ammunition as it leaves the storage container.
What is a Rear Sight Slide Assembly? 12 Items: A Rear Sight Slide Assembly (SLIDE ASSEMBLY,REAR SIGHT) is an item which slides up and down a rear sight's leaf. It has a U or V shaped notch or aperture which can be positioned on the leaf to adjust the sight for the range at which the target is located.
What is a Sniper Rifle? 51 Items: A Sniper Rifle (RIFLE,SNIPER) is a rifle specifically designed to be used to provide counter-sniper fire with the advantage of standoff and increased terminal effects. It will consist of a combination of improved optics, modified hardware, faster rate of fire and longer range than a normal rifle.
What is a Gun Mount Arm? 27 Items: A Gun Mount Arm (ARM,MOUNT,GUN) is a solid metallic item required between the gun and the pedetal, mount or tripod. Item allows the gun to be articulated in both azimuth and elevation.
What is a Machine Gun Ammunition Pouch? 27 Items: A Machine Gun Ammunition Pouch (POUCH,AMMUNITION,MACHINE GUN) is a holder for machine gun ammunition. Made of plastic, cloth and metal or a combination thereof. Attached to machinegun for holding and dispensing linked belt ammunition for fully automatic weapons.
Case,Gun 46 Items
What is a Bipod Leg Foot? 11 Items: A Bipod Leg Foot (FOOT,BIPOD LEG) is an item designed to be affixed to the lower end of a LEG, RIFLE BIPOD or a LEG, MACHINE GUN BIPOD as to prevent it from slipping and/or sinking into soft ground.
What is a Gun Cheek Rest? 25 Items: A Gun Cheek Rest (CHEEK REST,GUN) is an item designed to be mounted on the gun butt or similar area of a shoulder-fired weapon. It improves shooter's comfort and/or raises the shooter's eye to a proper sighting position. It may be removable.
What is a Firing Mechanism Cocking Piece? 11 Items: A Firing Mechanism Cocking Piece (COCKING PIECE,FIRING MECHANISM) is an item of varying design used to mechanically prepare the operating parts of the weapon for firing. It may act as a lever, ride a cam path, act directly against a hammer, or otherwise prepare the weapon to fire. It normally acts directly against the initiating source. Excludes items where cocking the weapon is a secondary function.
What is a 25 Millimeter Automatic Gun Aircraft Armament Pod? 14 Items: A 25 Millimeter Automatic Gun Aircraft Armament Pod (ARMAMENT POD,AIRCRAFT,25 MILLIMETER AUTOMATIC GUN) is an armament pod designed for attachment of one or more 25 millimeter automatic gun(s) to an AIRPLANE (as modified).
What is a Small Arms Weapon Suppressor? 150 Items: A Small Arms Weapon Suppressor (SUPPRESSOR,SMALL ARMS WEAPON) is an item designed to reduce the acoustic, visual and/or infra-red signature of a small arms weapon during firing. The item may be an integral part of the weapon, or attachable as an accessory and incorporates integral chambers and/or baffles which allow passage of the projectile while retarding propellant gasses. For items that only decrease the sound of the weapon, see SILENCER,GUN.
What is a Rifle Conversion Kit? 27 Items: A Rifle Conversion Kit (CONVERSION KIT,RIFLE) is a conversion kit designed to modify a rifle or a number of rifles for a specific purpose.
What is a Semi-Automatic 9 Millimeter Pistol? 50 Items: A Semi-Automatic 9 Millimeter Pistol (PISTOL,9 MILLIMETER,SEMI-AUTOMATIC) is for a full automatic pistol, see PISTOL,9 MILLIMETER,AUTOMATIC.

Stock Items From Supply Class 1005 Page 71 of 125

1005-01-566-8669
Rifle Mount

015668669
19KP657: RNCC: 3 | RNVC: 2
19KP657: RNCC: 3 | RNVC: 9
12508434: RNCC: 5 | RNVC: 2

12 Sep 2008

1005-01-568-5695
Scoop Disc

015685695
10067741: RNCC: 3 | RNVC: 2

4 Nov 2008

1005-01-571-9665
Mount Pintle

015719665
3392AS685: RNCC: 3 | RNVC: 2

23 Feb 2009

1005-01-572-2164
Safety Detent

015722164
13033067: RNCC: 1 | RNVC: 2
29000015: RNCC: 3 | RNVC: 9

3 Mar 2009

1005-01-572-0734
Ejection Chute

015720734
3392AS786: RNCC: 3 | RNVC: 2
339AS786: RNCC: 5 | RNVC: 2

26 Feb 2009

1005-01-573-2339
Cartridge Extractor

015732339
S18457B: RNCC: 3 | RNVC: 9

13 Apr 2009

1005-01-573-3895
Small Arms Safety

015733895
892: RNCC: 3 | RNVC: 2
R892: RNCC: 3 | RNVC: 9

21 Apr 2009

1005-01-574-9934
Shou Stock Assembly

015749934
13012254: RNCC: 3 | RNVC: 2

16 Jun 2009

1005-01-576-2492
Shoulder Gun Stock

015762492
13026033: RNCC: 3 | RNVC: 2

25 Jul 2009

1005-01-577-2100
Small Weapons Sling

015772100
12901368: RNCC: 3 | RNVC: 2

28 Aug 2009

1005-01-578-9617
Rhcrossbeam Assembly

015789617
3392AS747: RNCC: 3 | RNVC: 2

26 Oct 2009

1005-01-579-3185
Gun Mount Cover

015793185
113084: RNCC: 3 | RNVC: 2
701372: RNCC: 5 | RNVC: 9

6 Nov 2009

1005-01-579-4805
Trigger Bar

015794805
CS0012: RNCC: 3 | RNVC: 9
CS012: RNCC: 5 | RNVC: 9

13 Nov 2009

1005-01-581-8139
Softpack Case

015818139
IP-911-4: RNCC: 3 | RNVC: 2
911-4: RNCC: 3 | RNVC: 9

28 Jan 2010

1005-01-584-5402
Cosine Angle Kit

015845402
ACI KIT 34 SB .50: RNCC: 3 | RNVC: 2

28 Apr 2010

1005-01-586-0489
Rifle Mount

015860489
13033546: RNCC: 3 | RNVC: 2
COMMANDERS01: RNCC: 5 | RNVC: 9

17 Jun 2010

1005-01-589-7071
Gu End Reinforced

015897071
S766076-151: RNCC: 3 | RNVC: 2

2 Nov 2010

1005-01-589-4490
Pintle

015894490
3392AS291: RNCC: 3 | RNVC: 2

26 Oct 2010

1005-01-593-8106
Slider Repair Kit

015938106
8347711: RNCC: 3 | RNVC: 2

18 Apr 2011

1005-01-367-0162
Ejection Chute

013670162
S255063-101: RNCC: 3 | RNVC: 2
6086344: RNCC: 5 | RNVC: 9
S2550631.101: RNCC: 5 | RNVC: 9
6086344: RNCC: C | RNVC: 1

5 Nov 1992

1005-01-375-8579
Gun Safey Actuator

013758579
225089: RNCC: 3 | RNVC: 2

23 May 1993

1005-01-385-6415
Ammunition Conveyor Element

013856415
912G0201: RNCC: 3 | RNVC: 2

15 Jan 1994

1005-01-382-7083
Gun Carrying Handle

013827083
12951021: RNCC: 3 | RNVC: 2
711419705302: RNCC: 5 | RNVC: 9

8 Nov 1993

1005-01-477-6391
Guide Cam

014776391
DAFD0019: RNCC: 3 | RNVC: 2
DAFD0019: RNCC: 5 | RNVC: 2
F8199-000144: RNCC: 6 | RNVC: 9

14 Aug 2000

1005-01-543-0998
Large Brass Brush

015430998
GA1006: RNCC: 3 | RNVC: 2

29 Aug 2006

1005-01-543-3435
Takedown Pin

015433435
91413-3: RNCC: 3 | RNVC: 2

8 Sep 2006

1005-01-547-2612
Pawl Spring

015472612
13013740: RNCC: 3 | RNVC: 2

16 Jan 2007

1005-01-547-2624
Weapon Mounted Adapter Rail

015472624
01-004-09157: RNCC: 3 | RNVC: 2
DD-8001: RNCC: 5 | RNVC: 9

16 Jan 2007

1005-01-551-5582
Machine Gun Feed Mechanism Cover

015515582
TYUW17400A: RNCC: 3 | RNVC: 2
8H-A31991: RNCC: D | RNVC: 9

21 May 2007

1005-01-551-4664
Ammunition Chute Adapter

015514664
TYUW13500A: RNCC: 3 | RNVC: 2
8H-A32119: RNCC: D | RNVC: 9

17 May 2007

1005-01-182-3846
Roller Conveyor

011823846
7-217233002: RNCC: 3 | RNVC: 2
7-217233002: RNCC: 3 | RNVC: 9
7-217233002: RNCC: 5 | RNVC: 2
7-217233002: RNCC: 5 | RNVC: 2

23 Jun 1984

1005-01-183-8089
One Cartridge Guide

011838089
1395AS197: RNCC: 3 | RNVC: 2

10 Jul 1984

1005-01-182-4040
Feed Shaft Assembly

011824040
387-3475: RNCC: 3 | RNVC: 9
387-3475: RNCC: 5 | RNVC: 9
387-3475: RNCC: C | RNVC: 1

23 Jun 1984

1005-01-183-9452
Guide Assembly

011839452
014318-1: RNCC: 3 | RNVC: 2
014318-1: RNCC: 5 | RNVC: 9

12 Jul 1984

1005-01-182-4023
Bearing And Pin Assembly

011824023
387-3519: RNCC: 3 | RNVC: 2
387-3519: RNCC: 3 | RNVC: 2
387-3519: RNCC: 3 | RNVC: 2
387-3519: RNCC: 5 | RNVC: 9
387-3519: RNCC: 5 | RNVC: 9
387-3519: RNCC: C | RNVC: 1
387-3519: RNCC: C | RNVC: 1

23 Jun 1984

1005-01-184-6365
Seal Ring Segment

011846365
7012722: RNCC: 3 | RNVC: 2

20 Jul 1984

1005-01-184-1693
Left Hand Forward Elbow Collar

011841693
7-217236105: RNCC: 3 | RNVC: 2
7-217236105: RNCC: 5 | RNVC: 9

15 Jul 1984

1005-01-185-3838
Ammunition Conveyor Element

011853838
217F303: RNCC: 3 | RNVC: 2
3141AS471-1: RNCC: 5 | RNVC: 2
217F303H3: RNCC: 5 | RNVC: 2
3141AS471-1: RNCC: 5 | RNVC: 2
217F303: RNCC: 5 | RNVC: 2
020239-1: RNCC: 5 | RNVC: 9
1005PL0916010: RNCC: 6 | RNVC: 9
3141AS471: RNCC: D | RNVC: 9

27 Jul 1984

1005-01-186-6170
Slip Ring Assembly

011866170
7566628-011: RNCC: 3 | RNVC: 2
7566628-011: RNCC: 3 | RNVC: 2
7566628-011: RNCC: 5 | RNVC: 2
7566628-011: RNCC: 5 | RNVC: 2

12 Aug 1984

1005-01-193-4715
Hinge Pin Link Door

011934715
1005V0705: RNCC: 3 | RNVC: 2
502722-01: RNCC: 5 | RNVC: 2
5027722-01: RNCC: 5 | RNVC: 2
5027722-01: RNCC: 5 | RNVC: 2

4 Nov 1984

1005-01-193-4721
Decal Secure Hatches

011934721
7566548-001: RNCC: 3 | RNVC: 2
7566548-001: RNCC: 3 | RNVC: 2

4 Nov 1984

1005-01-193-4730
Cleat Mounting

011934730
101418-01: RNCC: 3 | RNVC: 2
101418-01: RNCC: 3 | RNVC: 2

4 Nov 1984

1005-01-191-1012
Clamp Assembly

011911012
H661-BS245-6: RNCC: 3 | RNVC: 2

6 Oct 1984

1005-01-191-8884
Mount Vertical Precision Level

011918884
12323401: RNCC: 3 | RNVC: 2

13 Oct 1984

1005-01-203-7819
Small Arms Release

012037819
12524166: RNCC: 3 | RNVC: 2
465-4166: RNCC: 5 | RNVC: 2
12524166: RNCC: 5 | RNVC: 2
2 0040-058: RNCC: 5 | RNVC: 2
2 0040-058: RNCC: 5 | RNVC: 9
465-4166: RNCC: 5 | RNVC: 9
10096533: RNCC: 6 | RNVC: 9

20 Mar 1985

1005-01-211-8368
Base Key

012118368
9350047: RNCC: 3 | RNVC: 2
711531502909: RNCC: 6 | RNVC: 9

2 Jul 1985

1005-01-216-0096
Maintenace Fixture

012160096
5525133: RNCC: 3 | RNVC: 2
5525133: RNCC: 5 | RNVC: 2
10137989: RNCC: 6 | RNVC: 9

5 Sep 1985

1005-01-204-6039
Small Arms Cartridge Guide

012046039
007233-1: RNCC: 3 | RNVC: 2
007233-1: RNCC: 3 | RNVC: 9

28 Mar 1985

1005-01-215-8184
Eject Guide

012158184
387-3312-9: RNCC: 3 | RNVC: 9
387-3312-9: RNCC: 5 | RNVC: 2
387-3312-9: RNCC: 5 | RNVC: 9
387-3312-9: RNCC: C | RNVC: 1

1 Sep 1985

1005-01-220-8566
Rod Scraper

012208566
S30388-4: RNCC: 3 | RNVC: 2
S30388-004-1: RNCC: 3 | RNVC: 2
S30388-4: RNCC: 5 | RNVC: 9

21 Nov 1985

1005-01-221-0425
Ammunition Chute

012210425
7-217232910-29: RNCC: 1 | RNVC: 2
0613D23187-3: RNCC: 3 | RNVC: 2
7-217232910-29: RNCC: 5 | RNVC: 2
7-217232910-29: RNCC: 5 | RNVC: 9

23 Nov 1985

1005-01-227-5205
Actuator Gate

012275205
5191244-2: RNCC: 3 | RNVC: 2
5191244-2: RNCC: C | RNVC: 1

5 Mar 1986

1005-01-244-4340
Ammunition Drum Assembly Partition

012444340
5191144: RNCC: 3 | RNVC: 2
1005PL0961044: RNCC: 6 | RNVC: 9

14 Nov 1986

1005-01-246-7599
Recoil Support

012467599
1395AS267: RNCC: 3 | RNVC: 2

18 Dec 1986

1005-01-247-0499
Support Roller

012470499
1395AS269: RNCC: 3 | RNVC: 2

23 Dec 1986

1005-01-248-3038
Cartridge Guide

012483038
1395AS322: RNCC: 3 | RNVC: 2

22 Jan 1987

1005-01-255-2312
Ammunition Chute

012552312
217F642-103: RNCC: 1 | RNVC: 2
1211C24482: RNCC: 3 | RNVC: 2

16 May 1987

1005-01-257-7931
Ammunition Cartridge Guide

012577931
007236-1: RNCC: 3 | RNVC: 2
007236-1: RNCC: 5 | RNVC: 9

24 Jun 1987

1005-01-257-7932
Ammunition Conveyor

012577932
007247-503: RNCC: 3 | RNVC: 2
007247-503: RNCC: 5 | RNVC: 9

24 Jun 1987

1005-01-260-0201
Link Block

012600201
6289619: RNCC: 3 | RNVC: 2

24 Jul 1987

1005-01-260-2641
Swivel Screw

012602641
96022: RNCC: 3 | RNVC: 2

29 Jul 1987

1005-01-260-2665
Bipod(Harris)

012602665
1A2-L: RNCC: 3 | RNVC: 2
96117: RNCC: 3 | RNVC: 9
F96117: RNCC: 5 | RNVC: 2
711531504201: RNCC: 5 | RNVC: 9

29 Jul 1987

1005-01-268-1586
End Fitting Exit He

012681586
S256024-151: RNCC: 3 | RNVC: 2
101-667-01: RNCC: 3 | RNVC: 9
256024-151: RNCC: 5 | RNVC: 9

24 Nov 1987

1005-01-282-3650
Latch Clamping

012823650
37-10-086-20: RNCC: 3 | RNVC: 2
37-10-086-20: RNCC: 5 | RNVC: 2
515-7733-001: RNCC: 5 | RNVC: 2
717124439410: RNCC: 6 | RNVC: 9
12972501: RNCC: 7 | RNVC: 2
10-2260 PC 5: RNCC: D | RNVC: 9

13 Jul 1988

1005-01-278-7292
Link Trigger

012787292
1698AS111: RNCC: 3 | RNVC: 2

8 May 1988

1005-01-285-7889
Ammunition Cartridge Guide

012857889
142D6811: RNCC: 3 | RNVC: 2

21 Sep 1988

1005-01-298-0903
Ammunition Feed Electrohydraulic Drive Assembly

012980903
10029014: RNCC: 3 | RNVC: 2

11 Apr 1989

1005-01-300-6475
Gun Mount

013006475
9380475: RNCC: 3 | RNVC: 2

17 May 1989

1005-01-311-0137
Ammunition Cartridge Guide

013110137
219F366-2: RNCC: 3 | RNVC: 2

17 Nov 1989

1005-01-354-0456
Ammunition Conveyor Element

013540456
7567257-011: RNCC: 3 | RNVC: 2
7567257: RNCC: D | RNVC: 9

21 Feb 1992

1005-01-354-0457
Ammunition Conveyor Element

013540457
7567256-001: RNCC: 3 | RNVC: 2
7567256: RNCC: D | RNVC: 9

21 Feb 1992

1005-01-354-9976
Shoulder Gun Stock

013549976
F202380W: RNCC: 3 | RNVC: 2
NACREM12: RNCC: 5 | RNVC: 9
BGS-R-87012: RNCC: 5 | RNVC: 9
808650: RNCC: 5 | RNVC: 9
91599: RNCC: 5 | RNVC: 9
22990: RNCC: 5 | RNVC: 9
93795: RNCC: 5 | RNVC: 9
F202380: RNCC: 5 | RNVC: 9
F202380LS: RNCC: 5 | RNVC: 9

9 Mar 1992

1005-01-357-4806
Front Sight

013574806
82021: RNCC: 3 | RNVC: 2

6 Jan 1993

1005-01-357-4398
Machine Gun Mount

013574398
70750-82101-046: RNCC: 3 | RNVC: 2

23 Apr 1992

1005-01-358-7883
Cocking Breechblock Lever

013587883
82092: RNCC: 3 | RNVC: 2

21 May 1992

1005-01-360-1929
Rifle Barrel Key

013601929
82061: RNCC: 3 | RNVC: 2

19 Jun 1992

1005-01-358-7873
Recoil Mechanism Buffer

013587873
82110-1: RNCC: 3 | RNVC: 2
979856: RNCC: 5 | RNVC: 1
82110: RNCC: 5 | RNVC: 9
711662810802: RNCC: 6 | RNVC: 9
1005PL1630653: RNCC: 6 | RNVC: 9

21 May 1992

1005-01-359-9296
Magazine Catch Detent

013599296
34-280-333: RNCC: 3 | RNVC: 2
34225220: RNCC: 5 | RNVC: 2
P-225220: RNCC: 5 | RNVC: 9
1005PL1638634: RNCC: 6 | RNVC: 9

16 Jun 1992

1005-01-363-0200
Magazine Loader

013630200
LCMP05: RNCC: 3 | RNVC: 2

20 Aug 1992

1005-01-368-7478
Ammunition Cartridge Guide

013687478
12917034: RNCC: 3 | RNVC: 2

8 Dec 1992

1005-01-368-9852
Small Arms Sling

013689852
12011996: RNCC: 3 | RNVC: 2

12 Dec 1992

1005-01-377-7046
Link-Cartridge Case Deflector

013777046
6086346: RNCC: 3 | RNVC: 9
6086346: RNCC: D | RNVC: 9

23 Jul 1993

1005-01-386-4688
Link-Cartridge Case Deflector

013864688
6650443: RNCC: 3 | RNVC: 2
717124420805: RNCC: 5 | RNVC: 9

4 Feb 1994

1005-01-386-9881
Small Arms Cartridge Guide

013869881
912E0410: RNCC: 3 | RNVC: 2

21 Feb 1994

1005-01-394-7677
Rail Protector

013947677
12972676: RNCC: 3 | RNVC: 2
711531503401: RNCC: 5 | RNVC: 9
711531501405: RNCC: 6 | RNVC: 9

15 Aug 1994

NSN 1005-01-388-5697 013885697 SLIDER,MOUNT,MACHINE GUN

1005-01-388-5697
Machine Gun Mount Slider

013885697
6650437: RNCC: 3 | RNVC: 2
717124421110: RNCC: 5 | RNVC: 9

4 Apr 1994

1005-01-391-5098
Drum Drive Assembly

013915098
10048076: RNCC: 3 | RNVC: 2
10048076: RNCC: 5 | RNVC: 9

13 Jun 1994

1005-01-408-4600
Right Grip Assembly

014084600
12976877: RNCC: 3 | RNVC: 2
12976877: RNCC: 5 | RNVC: 2
FN94C7300: RNCC: 5 | RNVC: 9
12976877: RNCC: D | RNVC: 9

16 Feb 1995

1005-01-431-1463
Turret Gyro Assy

014311463
7566615-031: RNCC: 3 | RNVC: 2
7566615-031: RNCC: 3 | RNVC: 9
CN5028/MWG-503: RNCC: 5 | RNVC: 2
7566615-031: RNCC: 5 | RNVC: 2

8 May 1996

1005-01-433-8405
Machine Gun Barrel

014338405
12524520: RNCC: 3 | RNVC: 2
465-4520: RNCC: 5 | RNVC: 1

11 Jul 1996

1005-01-432-3339
Weapon Gun Modification Kit

014323339
57K0300: RNCC: 3 | RNVC: 2

4 Jun 1996

1005-01-440-2144
Ammunition Chute Assembly

014402144
S50-1210: RNCC: 3 | RNVC: 2
S505021: RNCC: D | RNVC: 9

8 Jan 1997

1005-01-441-1619
Key And Bolt Carrier Assembly

014411619
SP 62286: RNCC: 3 | RNVC: 2
SP62286: RNCC: 5 | RNVC: 2
8448505: RNCC: 5 | RNVC: 2
62286: RNCC: 5 | RNVC: 2
8448505: RNCC: 5 | RNVC: 2
711419704205: RNCC: 6 | RNVC: 9
1005014411619: RNCC: 6 | RNVC: 9

5 Feb 1997

1005-01-444-6090
Small Arms Cleaning Brush

014446090
465-5013: RNCC: 3 | RNVC: 9
588558402100: RNCC: 5 | RNVC: 2
465-5013: RNCC: 5 | RNVC: 2
465-5013: RNCC: 5 | RNVC: 2
465-5013: RNCC: 5 | RNVC: 2
465-5013: RNCC: 5 | RNVC: 2
465-5013: RNCC: 5 | RNVC: 9
10431299: RNCC: 6 | RNVC: 9
1005PL1275605: RNCC: 6 | RNVC: 9

12 May 1997

1005-01-449-5719
Commanders Rod End

014495719
7579605-031: RNCC: 3 | RNVC: 2
7579605-031: RNCC: 5 | RNVC: 2
7579605-031: RNCC: 5 | RNVC: 2

6 Oct 1997

1005-01-449-6306
Rear Sight

014496306
97082: RNCC: 3 | RNVC: 2
447345380004: RNCC: 5 | RNVC: 9

8 Oct 1997

1005-01-449-9683
Small Arms Cleaning Rod Case

014499683
911-7: RNCC: 3 | RNVC: 2

22 Oct 1997

1005-01-453-5383
9 Rib Rail Cover

014535383
12973134: RNCC: 3 | RNVC: 2

3 Mar 1998

1005-01-455-7744
Detent Mount

014557744
16100116-001: RNCC: 3 | RNVC: 2
16100116-001: RNCC: 5 | RNVC: 2
16100116-001: RNCC: 5 | RNVC: 9

14 May 1998

1005-01-456-5348
Travel Lock Assembly

014565348
12933685: RNCC: 3 | RNVC: 2
12295203: RNCC: E | RNVC: 8

16 Jun 1998

1005-01-457-6150
Gun Mount Pedestal Brace

014576150
12450087: RNCC: 3 | RNVC: 2
12450087: RNCC: 3 | RNVC: 2
3280308: RNCC: 5 | RNVC: 2
3280308: RNCC: 5 | RNVC: 9

29 Jul 1998

1005-01-462-4306
Automatic Gun Barrel

014624306
12011624: RNCC: 3 | RNVC: 2
12011624: RNCC: 5 | RNVC: 2
12011624: RNCC: 5 | RNVC: 9

3 Feb 1999

1005-01-463-2852
Stud Front

014632852
12030: RNCC: 3 | RNVC: 2

15 Mar 1999

1005-01-466-0426
Mechanical Equipment Seal Replacement Parts Kit

014660426
8305853-7: RNCC: 3 | RNVC: 1
8305867: RNCC: 5 | RNVC: 2
8305867: RNCC: 5 | RNVC: 2
8305867: RNCC: 5 | RNVC: 9
8305853-7: RNCC: 5 | RNVC: 9
8305853-7: RNCC: 5 | RNVC: 9
8305867: RNCC: 5 | RNVC: 9
TLCNVX238: RNCC: 5 | RNVC: 9

1 Jul 1999

1005-01-477-1443
Feeder-Delinker Assy Push Rod Housing

014771443
DAFD0003: RNCC: 3 | RNVC: 2

1 Aug 2000

1005-01-480-7338
Ammunition Chute Assembly

014807338
S256079-151: RNCC: 3 | RNVC: 2

4 Dec 2000

1005-01-477-3888
Cartridge Ejector Block

014773888
DAFD0030: RNCC: 3 | RNVC: 2
DAFD0030: RNCC: 5 | RNVC: 2
F8199-000143: RNCC: 6 | RNVC: 9

8 Aug 2000

1005-01-500-5321
Elevation Firing Stop

015005321
7520882: RNCC: 3 | RNVC: 2

29 Aug 2002

1005-01-501-0485
Safing Sector Latch

015010485
DMG0049: RNCC: 3 | RNVC: 2

20 Sep 2002

1005-01-498-4418
Seal Repl Parts Kit

014984418
201123403: RNCC: 3 | RNVC: 2
201123403: RNCC: 5 | RNVC: 2
201123403: RNCC: 5 | RNVC: 2
TLCAFX541: RNCC: 5 | RNVC: 9

26 Jun 2002

1005-01-502-5668
Gun Carrying Handle

015025668
10748-A: RNCC: 3 | RNVC: 2
711625002303: RNCC: 6 | RNVC: 9

12 Nov 2002

1005-01-502-5232
Mount Pintle

015025232
136475A: RNCC: 3 | RNVC: 2

8 Nov 2002

1005-01-504-8377
Set Ring Gas

015048377
21002: RNCC: 3 | RNVC: 2

11 Feb 2003

1005-01-505-2594
Gun Mount

015052594
3392AS164/LH: RNCC: 3 | RNVC: 2
3392AS164/LH: RNCC: 3 | RNVC: 2
3392AS164: RNCC: 3 | RNVC: 2

28 Feb 2003

1005-01-511-8329
Sniper Rifle Safety Pin

015118329
96028: RNCC: 3 | RNVC: 2
F96028: RNCC: 5 | RNVC: 2

18 Aug 2003

1005-01-512-2737
Firing Pin

015122737
11793P: RNCC: 3 | RNVC: 2

27 Aug 2003

1005-01-514-8427
Trigger Assembly

015148427
82069-2A: RNCC: 3 | RNVC: 2
711625003007: RNCC: 6 | RNVC: 9

6 Nov 2003

1005-01-516-1434
Traversing Scale

015161434
13001744: RNCC: 3 | RNVC: 2

19 Dec 2003

1005-01-517-4151
Cartridge Ejector

015174151
1538P: RNCC: 3 | RNVC: 2

6 Feb 2004

1005-01-517-6143
Gun Cover

015176143
13001761: RNCC: 3 | RNVC: 2

13 Feb 2004

1005-01-518-3796
Gun Mount Leg

015183796
3392AS171: RNCC: 3 | RNVC: 2

10 Mar 2004

1005-01-519-2129
Depression Stop

015192129
13008352: RNCC: 3 | RNVC: 2

9 Apr 2004

1005-01-519-2128
Adapter A Parts Kit

015192128
13008479: RNCC: 3 | RNVC: 2

9 Apr 2004

1005-01-523-1271
Heatshield Assembly

015231271
16335P: RNCC: 3 | RNVC: 2

20 Aug 2004

1005-01-523-6191
Machine Gun Grip

015236191
5231-A101-428: RNCC: 1 | RNVC: 2
701-2107: RNCC: 3 | RNVC: 2

9 Sep 2004

1005-01-523-9253
Booster Motor Mount Plate

015239253
6071-A103-566-01: RNCC: 3 | RNVC: 2

20 Sep 2004

1005-01-523-9963
Azimuth Plate

015239963
6071-A101-212-01: RNCC: 3 | RNVC: 2

21 Sep 2004

1005-01-524-3259
Gun Component Retainer

015243259
7614489: RNCC: 3 | RNVC: 2

29 Sep 2004

1005-01-524-3319
Elevation Latch Body

015243319
5231-A101-328-01: RNCC: 3 | RNVC: 2

29 Sep 2004

1005-01-524-3350
Azimuth Lock Lever Assy

015243350
5231-A201-318: RNCC: 3 | RNVC: 2

29 Sep 2004

1005-01-524-3911
Azimuth Lock Assy

015243911
5231-A201-319: RNCC: 3 | RNVC: 2

30 Sep 2004

1005-01-524-5242
Ammunition Chute Support

015245242
5231-A101-454: RNCC: 3 | RNVC: 2

6 Oct 2004

1005-01-524-6927
Mount Pintle

015246927
6071-A201-202-01: RNCC: 3 | RNVC: 2

13 Oct 2004

1005-01-524-7371
Feed Chute Roller Assembly

015247371
6071-A201-213: RNCC: 3 | RNVC: 2

14 Oct 2004

1005-01-526-3464
Flash Suppressor

015263464
249F: RNCC: 3 | RNVC: 2

15 Dec 2004

1005-01-529-8408
Sling Mounting Kit

015298408
13006534: RNCC: 3 | RNVC: 2

4 May 2005

1005-01-532-8139
Fi Safety Indicator

015328139
STR309: RNCC: 3 | RNVC: 2

22 Aug 2005

1005-01-533-8160
Small Arms Sight Mount

015338160
2008: RNCC: 3 | RNVC: 2

28 Sep 2005

1005-01-535-1903
Small Arms Cleaning Rod

015351903
6914635: RNCC: 3 | RNVC: 2
250-0252: RNCC: 5 | RNVC: 9
RE 12-12 011: RNCC: 5 | RNVC: 9
250-0252: RNCC: C | RNVC: 1

18 Nov 2005

1005-01-532-8130
Fi Safety Indicator

015328130
STR45S: RNCC: 3 | RNVC: 2

22 Aug 2005

1005-01-541-8979
Shoulder Gun Stock Butt Plate

015418979
24765: RNCC: 3 | RNVC: 2

14 Jul 2006

1005-01-537-0027
Suppressor Body

015370027
23109: RNCC: 3 | RNVC: 2

23 Jan 2006

1005-01-550-5035
Ammunition Conveyor

015505035
6736620: RNCC: 3 | RNVC: 2
6736620: RNCC: 5 | RNVC: 2

20 Apr 2007

1005-01-551-2381
Ammunition Chute Assembly

015512381
S255123-101: RNCC: 3 | RNVC: 2

10 May 2007

1005-01-552-1111
Ammunition Bracket Adapter

015521111
TYUW17462A: RNCC: 3 | RNVC: 2
8H-A31531: RNCC: D | RNVC: 9

6 Jun 2007

1005-01-552-1175
Elevating And Firing Cradle Support

015521175
TYUW14604A: RNCC: 3 | RNVC: 2
8H-A32094: RNCC: D | RNVC: 9

6 Jun 2007

1005-01-556-6680
Fore-Grip Kydex

015566680
90907: RNCC: 3 | RNVC: 2

3 Oct 2007

1005-01-557-3101
Cartridge Magazine

015573101
99004A1445: RNCC: 1 | RNVC: 2
306-82-5: RNCC: 3 | RNVC: 2
3901: RNCC: 5 | RNVC: 2

18 Oct 2007

1005-01-558-6933
Firing Pin

015586933
49056: RNCC: 3 | RNVC: 2

19 Nov 2007

1005-01-560-0131
Gun Cleaning Kit

015600131
13017102: RNCC: 3 | RNVC: 2

11 Jan 2008

1005-01-562-0913
Handguard Freefloat

015620913
21318: RNCC: 3 | RNVC: 2

28 Mar 2008

1005-01-562-0932
Muzzle Brake

015620932
1050: RNCC: 3 | RNVC: 2

28 Mar 2008

1005-01-562-1119
Ejection Chute

015621119
DMG0656: RNCC: 3 | RNVC: 2

29 Mar 2008

1005-01-563-1631
Small Arms Release Lever

015631631
227748: RNCC: 3 | RNVC: 2
13019469: RNCC: 3 | RNVC: 2

2 May 2008

1005-01-563-6717
Bipod Clamp

015636717
13013481: RNCC: 3 | RNVC: 2

16 May 2008

1005-01-563-7182
Backplate Assembly

015637182
136755: RNCC: 3 | RNVC: 2
136755: RNCC: 5 | RNVC: 2

20 May 2008

1005-01-564-6768
Gas Re Erosion Tool

015646768
912302690: RNCC: 3 | RNVC: 2
13013477: RNCC: 7 | RNVC: 2

24 Jun 2008

1005-01-566-1682
Supply Card

015661682
GSST81000A: RNCC: 3 | RNVC: 2
GSST81000A: RNCC: 5 | RNVC: 2
HYDT8100A: RNCC: 5 | RNVC: 9

21 Aug 2008

1005-01-566-1991
Ammunition Feed Pawl

015661991
3305AS1554-1: RNCC: 3 | RNVC: 2

25 Aug 2008

1005-01-566-1774
Ammunition Handling Sprocket

015661774
3305AS1556-1: RNCC: 3 | RNVC: 2
3305AS1556-1: RNCC: 5 | RNVC: 9

22 Aug 2008

1005-01-567-8242
Special Recoil Bushing

015678242
12988408: RNCC: 3 | RNVC: 2
12988408: RNCC: 5 | RNVC: 2
12988408: RNCC: D | RNVC: 9

8 Oct 2008

1005-01-572-0324
Gun Mounting Adapter

015720324
3392AS700: RNCC: 3 | RNVC: 2

25 Feb 2009

1005-01-572-0730
Ejection Chute

015720730
3392AS785: RNCC: 3 | RNVC: 2

26 Feb 2009

1005-01-573-2707
Gun Cover

015732707
8215171-003: RNCC: 3 | RNVC: 2
8215171-003: RNCC: 5 | RNVC: 2
113075B: RNCC: 5 | RNVC: 2

15 Apr 2009

1005-01-573-3779
Hammer Set

015733779
CS271B: RNCC: 3 | RNVC: 9

20 Apr 2009

1005-01-573-3830
Recoil Spring Guide

015733830
R881-STD: RNCC: 3 | RNVC: 2

20 Apr 2009

1005-01-579-0394
Ammunition Chute

015790394
3392AS790: RNCC: 3 | RNVC: 2

28 Oct 2009

1005-01-579-4798
Sear

015794798
CS0011: RNCC: 3 | RNVC: 9
CS011: RNCC: 5 | RNVC: 9

13 Nov 2009

1005-01-576-7431
Automatic Gun Stop

015767431
3392AS740: RNCC: 3 | RNVC: 2

12 Aug 2009

1005-01-583-2534
Thread 60Mm Adapter

015832534
13021511: RNCC: 3 | RNVC: 2

19 Mar 2010

1005-01-585-6824
Ammunition Chute Section

015856824
5238-2: RNCC: 3 | RNVC: 2

3 Jun 2010

1005-01-587-2157
Cable Puller

015872157
10052645: RNCC: 3 | RNVC: 2

28 Jul 2010

1005-01-586-9877
Gun Safety Lock

015869877
PRH-10002: RNCC: 3 | RNVC: 9
PRH-10002: RNCC: 5 | RNVC: 2

21 Jul 2010

1005-01-588-8532
Pintle Lock Handle

015888532
MTM-10129: RNCC: 3 | RNVC: 2

6 Oct 2010

1005-01-589-5816
Uh-1N Subsy's Adapter

015895816
1698AS167: RNCC: 3 | RNVC: 2

30 Oct 2010

1005-01-592-3389
Gun Case

015923389
017700-0010-110X: RNCC: 3 | RNVC: 2
39305: RNCC: 5 | RNVC: 1
PEL CS 1770-001-110: RNCC: 5 | RNVC: 2
PEL CS 1770: RNCC: 5 | RNVC: 9
1770: RNCC: 5 | RNVC: 9
1770-001-110: RNCC: 5 | RNVC: 9

3 Mar 2011

1005-01-593-7893
Gun Cover

015937893
8180391-2: RNCC: 3 | RNVC: 2
M5428G: RNCC: 5 | RNVC: 2

18 Apr 2011

1005-01-593-8047
Link Adapter Sleeve

015938047
3392AS1426: RNCC: 3 | RNVC: 2

18 Apr 2011

1005-01-498-5153
Ammunition Handling Sprocket

014985153
6570815: RNCC: 3 | RNVC: 2
6736631: RNCC: 5 | RNVC: 9
6736631: RNCC: 5 | RNVC: 9

28 Jun 2002

1005-01-483-1792
Machine Gun Mount Slider

014831792
7103264: RNCC: 3 | RNVC: 2

19 Mar 2001

1005-01-535-5576
Barrel Er Indicator

015355576
13011911: RNCC: 3 | RNVC: 2
13011911: RNCC: 5 | RNVC: 2
13011911: RNCC: 5 | RNVC: 2
10416445: RNCC: 6 | RNVC: 9

2 Dec 2005

1005-01-543-0991
Large Brush Adapter

015430991
GA1005: RNCC: 3 | RNVC: 2

29 Aug 2006

1005-01-035-9658
Valve Hydraulic Control Cover

010359658
MC14384: RNCC: 3 | RNVC: 2
MC14384: RNCC: 5 | RNVC: 9

18 Feb 1977

1005-01-042-4683
Shouldered Sprocket Shaft

010424683
167C1672: RNCC: 3 | RNVC: 2

10 Jun 1977

1005-01-042-4678
Latch Hook

010424678
196B7140: RNCC: 3 | RNVC: 9

10 Jun 1977

1005-01-054-0015
Forward Unload Gate

010540015
105D3891: RNCC: 3 | RNVC: 2

13 Jan 1978

1005-01-054-9886
Seat Assembly

010549886
MC8942: RNCC: 3 | RNVC: 2
MC8942: RNCC: 5 | RNVC: 9

30 Jan 1978

1005-01-055-2156
Ammunition Drum Assembly Partition

010552156
201F874-2: RNCC: 3 | RNVC: 2
201F874: RNCC: 5 | RNVC: 9
1005PL0696303: RNCC: 6 | RNVC: 9

3 Feb 1978

1005-01-055-6473
Ammunition Cartridge Guide

010556473
201F479: RNCC: 3 | RNVC: 2
1005PL0697387: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-055-9901
Ammunition Chute

010559901
201F946-1: RNCC: 1 | RNVC: 2
0621D18553: RNCC: 3 | RNVC: 2
1005PL0698155: RNCC: 6 | RNVC: 9
1005PL1606067: RNCC: 6 | RNVC: 9

15 Feb 1978

1005-01-059-5050
Core Assembly

010595050
105D3947-1: RNCC: 1 | RNVC: 2
8698-200: RNCC: 3 | RNVC: 2
14130-806: RNCC: 5 | RNVC: 9

12 Apr 1978

1005-01-059-0501
Mid Rotor

010590501
209F530: RNCC: 3 | RNVC: 2

6 Apr 1978

1005-01-061-3789
Rear Fixed Scoop

010613789
209F290: RNCC: 3 | RNVC: 2
209F290: RNCC: 5 | RNVC: 2

19 Jun 1978

1005-01-062-6941
Exit Debris Shield Assembly

010626941
209F717: RNCC: 3 | RNVC: 2

21 Jul 1978

1005-01-071-9813
Mount Pintle

010719813
12266188: RNCC: 3 | RNVC: 2

18 Feb 1979

1005-01-077-1652
Switch Adjustme Jig

010771652
12277474-2: RNCC: 3 | RNVC: 2

19 May 1979

1005-01-088-4362
Upper Eject Guide

010884362
12524116: RNCC: 3 | RNVC: 2
465-4116: RNCC: 5 | RNVC: 9
465-4116: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-111-4002
Drive Assembly Cover

011114002
12292395: RNCC: 3 | RNVC: 2
12292395: RNCC: 3 | RNVC: 9

16 Apr 1981

1005-01-111-4011
Guide Plate

011114011
12276830: RNCC: 3 | RNVC: 2

16 Apr 1981

1005-01-112-6282
Gyro Support

011126282
12292569: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-099-2791
Valve Plate

010992791
MC13571: RNCC: 3 | RNVC: 2
MC13571: RNCC: 5 | RNVC: 9
10162749: RNCC: 6 | RNVC: 9

15 Aug 1980

1005-01-115-5446
Rear Gate Assembly

011155446
12524207: RNCC: 3 | RNVC: 2
465-4207: RNCC: 5 | RNVC: 9
465-4207: RNCC: C | RNVC: 1

9 Jul 1981

1005-01-116-1486
Reposition Cartridge Guide

011161486
209F356: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-125-5695
Cable Assembly Connector

011255695
3733 039 000: RNCC: 3 | RNVC: 2

29 Jan 1982

1005-01-130-3380
Tripod Mount Leg Section

011303380
9348330: RNCC: 3 | RNVC: 2
3618670016: RNCC: 5 | RNVC: 2
711531500308: RNCC: 6 | RNVC: 9

21 Apr 1982

1005-01-136-4235
Threaded Drive Adapter

011364235
167C2428: RNCC: 3 | RNVC: 2
10162742: RNCC: 6 | RNVC: 9

8 Aug 1982

1005-01-144-1492
Hammer Spring

011441492
9349107: RNCC: 3 | RNVC: 2

15 Dec 1982

1005-01-145-9280
Tow Lift Mechanism Slip Clutch Assembly

011459280
12292911: RNCC: 3 | RNVC: 2

21 Jan 1983

1005-01-149-8284
Brush

011498284
B540-AG103: RNCC: 3 | RNVC: 2

27 Mar 1983

1005-01-150-5802
Ammunition Chute Assembly

011505802
S257010-151: RNCC: 3 | RNVC: 2
257010-151: RNCC: 5 | RNVC: 9

6 Apr 1983

1005-01-152-2299
Valve Spool Assembly

011522299
MC16269: RNCC: 3 | RNVC: 2
MC16269: RNCC: 5 | RNVC: 9

29 Apr 1983

1005-01-166-1944
Assembly Cam

011661944
65738: RNCC: 3 | RNVC: 2
101570: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-167-1159
Blower Exhaust

011671159
502561-01: RNCC: 3 | RNVC: 2
502561-01: RNCC: 3 | RNVC: 9
502561-01: RNCC: 5 | RNVC: 2
CS-1005-SV-0704: RNCC: 5 | RNVC: 2
502561-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1215
Screw Wing

011671215
7567141-011: RNCC: 3 | RNVC: 2
502492: RNCC: 5 | RNVC: 9
502492-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1259
Roller

011671259
502527-01: RNCC: 3 | RNVC: 9
502527-01: RNCC: 5 | RNVC: 2
502587-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1289
Spring Mandrel

011671289
508220-01: RNCC: 3 | RNVC: 2
508223-01: RNCC: 5 | RNVC: 2
508220-01: RNCC: 5 | RNVC: 2
508220-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-169-1144
Seal Retainer Ring

011691144
7012726: RNCC: 3 | RNVC: 2

4 Jan 1984

1005-01-170-8351
Guide Plug

011708351
570261: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-172-2856
Tow Bracket

011722856
12328536: RNCC: 3 | RNVC: 2

18 Feb 1984

1005-01-174-7741
Assy Retractable Slide

011747741
82A5027A6060: RNCC: 3 | RNVC: 2

22 Mar 1984

1005-01-180-9598
Adjusting Stem

011809598
MC16891: RNCC: 3 | RNVC: 2
MC16891: RNCC: 5 | RNVC: 9

5 Jun 1984

1005-01-109-1559
Stop Pin Cam

011091559
12297897: RNCC: 3 | RNVC: 2

11 Mar 1981

1005-01-110-7642
Plenum Defogger

011107642
12297669: RNCC: 3 | RNVC: 2

5 Apr 1981

1005-01-097-6147
Nut Bolt Assembly

010976147
5910590-1: RNCC: 3 | RNVC: 2
5910590-1: RNCC: 5 | RNVC: 9
5910590-1: RNCC: 5 | RNVC: 9
5910590: RNCC: C | RNVC: 1

16 Jul 1980

1005-01-098-8122
Depot Overhaul-Hydraulic Motor Kit

010988122
MC5019: RNCC: 3 | RNVC: 2
MC5019: RNCC: 3 | RNVC: 9

7 Aug 1980

1005-01-112-8557
Gyro Rate And Demodulator Specification

011128557
12292197-2: RNCC: 1 | RNVC: 2
103285-001: RNCC: 3 | RNVC: 2
304780-3: RNCC: 5 | RNVC: 9
12292197-2: RNCC: 5 | RNVC: 9
79858: RNCC: 5 | RNVC: 9
12292197: RNCC: 5 | RNVC: 9

11 May 1981

1005-01-101-6254
Housing Assembly

011016254
12293615: RNCC: 3 | RNVC: 2
12293615: RNCC: 5 | RNVC: 1
12293615: RNCC: 5 | RNVC: 2
12293615: RNCC: 5 | RNVC: 2
12293615: RNCC: 5 | RNVC: 9

4 Oct 1980

1005-01-108-8688
Gun Bracket

011088688
176C1946: RNCC: 3 | RNVC: 2

6 Mar 1981

1005-01-079-6208
Ammunition Cartridge Guide

010796208
189F271-2: RNCC: 3 | RNVC: 2

9 Jul 1979

1005-01-112-6287
Front Armor Plate

011126287
12294619: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-114-0063
Gunners Handstation Mount

011140063
12292574: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-090-5264
Clutch Yoke Assembly

010905264
12524230: RNCC: 3 | RNVC: 2
12524230: RNCC: 5 | RNVC: 2
465-4230: RNCC: 5 | RNVC: 9
10126020: RNCC: 6 | RNVC: 9
1005PL1276534: RNCC: 6 | RNVC: 9
465-4230: RNCC: C | RNVC: 1

21 Feb 1980

1005-01-116-1458
Unload Gate Arm

011161458
167C2175: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1475
Guide Gate

011161475
176F821-3: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-139-1974
Linkage Rod

011391974
MC14733: RNCC: 3 | RNVC: 2
MC14733: RNCC: 5 | RNVC: 9

27 Sep 1982

1005-01-131-1908
Front Sight

011311908
9350001: RNCC: 3 | RNVC: 2
711531505705: RNCC: 5 | RNVC: 9

6 May 1982

1005-01-034-9495
Bracket Assembly

010349495
116C3790: RNCC: 3 | RNVC: 2
116C3790: RNCC: 5 | RNVC: 9

1 Feb 1977

1005-01-034-9496
Aircraft Gun Drive Housing

010349496
189F727: RNCC: 3 | RNVC: 2
176F236: RNCC: E | RNVC: 8

1 Feb 1977

1005-01-053-9254
Turnaround Forward Housing

010539254
205F476: RNCC: 3 | RNVC: 2

13 Jan 1978

1005-01-054-0016
Outer Cartridge Guide

010540016
105D3916: RNCC: 3 | RNVC: 2
1005PL0695735: RNCC: 6 | RNVC: 9

13 Jan 1978

1005-01-055-3370
Load Gate

010553370
105D3912: RNCC: 3 | RNVC: 2
1005PL0697137: RNCC: 6 | RNVC: 9

4 Feb 1978

1005-01-055-6479
Aft Feeder Sprocket

010556479
105D3936: RNCC: 3 | RNVC: 2
1005PL0697677: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-059-5054
Chute Center Section

010595054
201F946-102: RNCC: 1 | RNVC: 2
1211C17578: RNCC: 3 | RNVC: 2
17578: RNCC: 5 | RNVC: 9
1005PL0698325: RNCC: 6 | RNVC: 9
1005PL1590437: RNCC: 6 | RNVC: 9
1005PL1590442: RNCC: 6 | RNVC: 9

12 Apr 1978

1005-01-061-3589
Bolt Assembly

010613589
132D1421-1: RNCC: 3 | RNVC: 2
132D1421-1: RNCC: 5 | RNVC: 2
132D1421: RNCC: 5 | RNVC: 9

17 Jun 1978

1005-01-062-6940
Entrance Debris Shield Assembly

010626940
209F714: RNCC: 3 | RNVC: 2

21 Jul 1978

1005-01-073-2211
Timing Headed Grooved Pin

010732211
167C2261: RNCC: 3 | RNVC: 2
1005PL0698649: RNCC: 6 | RNVC: 9

12 Mar 1979

1005-01-076-4136
Ammo Tray Holder

010764136
12266459: RNCC: 3 | RNVC: 2

6 May 1979

1005-01-079-6207
Ammunition Cartridge Guide

010796207
189F270-2: RNCC: 3 | RNVC: 2

9 Jul 1979

1005-01-112-2628
Gun Shield

011122628
12295658: RNCC: 3 | RNVC: 2

30 Apr 1981

1005-01-112-3942
Bolt Retainer

011123942
12297531: RNCC: 3 | RNVC: 2

3 May 1981

1005-01-088-4395
Feeder Handle

010884395
12524208: RNCC: 3 | RNVC: 2
12524208: RNCC: 5 | RNVC: 2
465-4208: RNCC: 5 | RNVC: 9
1005PL1276462: RNCC: 6 | RNVC: 9
10096573: RNCC: 6 | RNVC: 9
465-4208: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-112-6269
Gun Elevation Adapter

011126269
12292453: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-088-4411
Recoil Dampener Rod

010884411
12524441: RNCC: 3 | RNVC: 2
465-4441: RNCC: 5 | RNVC: 9
465-4441: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-089-7738
Firing Pin Sleeve Keeper

010897738
12524321: RNCC: 3 | RNVC: 2
465-4321: RNCC: 5 | RNVC: 9
465-4321: RNCC: C | RNVC: 1

7 Feb 1980

1005-01-114-0080
Breech Assembly

011140080
12524370: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-115-5442
Turret Base Cover

011155442
12307324: RNCC: 3 | RNVC: 2

9 Jul 1981

1005-01-092-1790
Fwd Unload Gate

010921790
105D3891-2: RNCC: 3 | RNVC: 2
1005PL0698711: RNCC: 6 | RNVC: 9

20 Mar 1980

1005-01-107-5649
Seat Support

011075649
12294495: RNCC: 3 | RNVC: 2

8 Feb 1981

1005-01-116-1490
Ammunition Drum Assembly Partition

011161490
209F427: RNCC: 3 | RNVC: 2
10104440: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1504
Exit Scoop Disc Assembly

011161504
209F594: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1503
Inner Drum

011161503
209F572: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-4444
Switch And Connector

011164444
12292618: RNCC: 3 | RNVC: 2
12292860-4: RNCC: 5 | RNVC: 9

26 Jul 1981

1005-01-117-0030
Switch And Connecto

011170030
12292614: RNCC: 3 | RNVC: 2
12292860-5: RNCC: 5 | RNVC: 9

7 Aug 1981

1005-01-117-4454
Plastic Insert

011174454
MC15669: RNCC: 3 | RNVC: 2
MC15669: RNCC: 5 | RNVC: 9

14 Aug 1981

1005-01-120-4789
Wear Plate Cartridge Guide

011204789
209F489: RNCC: 3 | RNVC: 2

19 Oct 1981

1005-01-128-5721
Cartridge Ejector

011285721
9348223: RNCC: 3 | RNVC: 2
3612560019: RNCC: 5 | RNVC: 2
711531511006: RNCC: 6 | RNVC: 9

25 Mar 1982

1005-01-128-5712
Trigger Guard

011285712
9348370: RNCC: 3 | RNVC: 2
3615810016: RNCC: 5 | RNVC: 2
711531514803: RNCC: 6 | RNVC: 9

25 Mar 1982

1005-01-131-4955
Gun Bearing

011314955
2586229-22: RNCC: 1 | RNVC: 2
07DU08: RNCC: 3 | RNVC: 2
07DU08: RNCC: 3 | RNVC: 2

12 May 1982

1005-01-140-3283
Cable Segment Clamp

011403283
211F327: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-150-5799
Turret Link Assembly

011505799
S257010-152: RNCC: 3 | RNVC: 2
257010-152: RNCC: 5 | RNVC: 9

6 Apr 1983

1005-01-166-1950
Stator Cover

011661950
65712-1: RNCC: 3 | RNVC: 2
65712: RNCC: 5 | RNVC: 9
65712: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-167-1168
Bushing Spherical

011671168
508262-01: RNCC: 3 | RNVC: 2
RCR-6FB: RNCC: 5 | RNVC: 2
LHSS-6 BALL ONLY: RNCC: 5 | RNVC: 9
COR-6 BALL ONLY: RNCC: 5 | RNVC: 9
508262-01: RNCC: 5 | RNVC: 9
508262-01: RNCC: 7 | RNVC: 2

22 Nov 1983

1005-01-167-1182
Anchor Spring

011671182
508241-01: RNCC: 3 | RNVC: 2
508241-01: RNCC: 3 | RNVC: 2
508241-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-167-1237
Connector Bracket

011671237
502489-01: RNCC: 3 | RNVC: 2
502489-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1280
Control Box Support

011671280
508107-01: RNCC: 3 | RNVC: 2
508107-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-170-1982
Sear

011701982
12524089: RNCC: 3 | RNVC: 2

20 Jan 1984

1005-01-170-4500
Cartridge Extractor

011704500
82A5027A5016: RNCC: 3 | RNVC: 2

25 Jan 1984

1005-01-174-1994
Carrier Rear Insert

011741994
82A5027A5140: RNCC: 3 | RNVC: 2

15 Mar 1984

1005-01-182-1015
Lower Slider

011821015
014229-1: RNCC: 3 | RNVC: 2
014229-1: RNCC: 3 | RNVC: 9

19 Jun 1984

1005-01-033-1528
Machine Gun Grip

010331528
11826232-1: RNCC: 3 | RNVC: 2
11826232-1: RNCC: 5 | RNVC: 2
11826232-1: RNCC: 5 | RNVC: 2
3602010154: RNCC: 5 | RNVC: 9
1005010331528: RNCC: 6 | RNVC: 9

30 Dec 1976

1005-01-029-9255
Diffuser Assembly

010299255
537AS595: RNCC: 3 | RNVC: 2

26 Oct 1976

1005-01-042-9821
Breech Bolt

010429821
11691422: RNCC: 3 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 2
11691422: RNCC: 5 | RNVC: 9
10104434: RNCC: 6 | RNVC: 9
1005PL0959873: RNCC: 6 | RNVC: 9

17 Jun 1977

1005-01-128-9838
End Bell Machine

011289838
42419: RNCC: 3 | RNVC: 2

30 Mar 1982

1005-01-043-7938
Strap Webbing

010437938
8433770-1: RNCC: 3 | RNVC: 2

1 Jul 1977

1005-01-050-2735
Gun System Exit Unit

010502735
209F441: RNCC: 3 | RNVC: 2
209F441: RNCC: 3 | RNVC: 2
16VS002002-2: RNCC: 5 | RNVC: 9
209F441: RNCC: 5 | RNVC: 9
209F441: RNCC: 5 | RNVC: 9
209F441: RNCC: 5 | RNVC: 9
1005PL0695112: RNCC: 6 | RNVC: 9

3 Nov 1977

1005-01-053-3145
Mounting Pin

010533145
196B7631: RNCC: 3 | RNVC: 2
1005PL0695222: RNCC: 6 | RNVC: 9

1 Jan 1978

1005-01-055-6477
Entrance Unit Housing

010556477
209F438: RNCC: 3 | RNVC: 2
201F942: RNCC: 5 | RNVC: 9
1005PL0697656: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-055-9840
Ammunition Chute

010559840
201F974: RNCC: 1 | RNVC: 2
0721C18537: RNCC: 3 | RNVC: 2
1005PL1590381: RNCC: 6 | RNVC: 9
1005PL0915967: RNCC: 6 | RNVC: 9

15 Feb 1978

1005-01-078-5969
Pintle Lock Handle

010785969
12266284: RNCC: 3 | RNVC: 2
5749745-081: RNCC: C | RNVC: 1
711-5749745 REV: RNCC: C | RNVC: 1

16 Jun 1979

1005-01-080-6147
Semiconductor Device

010806147
1N1199: RNCC: 3 | RNVC: 2

29 Jul 1979

1005-01-081-4166
Handguard

010814166
9327076: RNCC: 3 | RNVC: 2

13 Aug 1979

1005-01-088-4361
Feeder Standoff

010884361
12524115: RNCC: 3 | RNVC: 2
465-4115: RNCC: 5 | RNVC: 9
465-4115: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4416
Rear Track

010884416
12524470: RNCC: 3 | RNVC: 2
465-4470: RNCC: 5 | RNVC: 9
465-4470: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-090-3353
Pin And Cable Assembly

010903353
MC14749: RNCC: 3 | RNVC: 2
MC14374: RNCC: 5 | RNVC: 9
MC14749: RNCC: 5 | RNVC: 9

16 Feb 1980

1005-01-107-5647
Torsion Bar Retainer

011075647
12307571: RNCC: 3 | RNVC: 2
12294618: RNCC: 5 | RNVC: 9

8 Feb 1981

1005-01-110-3421
Ammunition Can Cover

011103421
12295226: RNCC: 3 | RNVC: 2
12295226: RNCC: 8 | RNVC: 1

28 Mar 1981

1005-01-110-3408
Electrical Resistance Heater

011103408
12295607: RNCC: 1 | RNVC: 2
KXF-7A410G480: RNCC: 3 | RNVC: 2
SK010478: RNCC: 5 | RNVC: 2
40B209527: RNCC: 5 | RNVC: 2
7A410G480: RNCC: 5 | RNVC: 9

28 Mar 1981

1005-01-112-8559
Traverse Drive Guard

011128559
12292544: RNCC: 3 | RNVC: 2

11 May 1981

1005-01-116-1454
Bearing Support

011161454
142D5622: RNCC: 3 | RNVC: 2
10162750: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1467
Protective Cover

011161467
167C2882: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1484
Chute End Assembly

011161484
1321C21600: RNCC: 3 | RNVC: 2
209F355-101: RNCC: 5 | RNVC: 2

21 Jul 1981

1005-01-116-1491
Ammunition Drum Assembly Partition

011161491
209F428: RNCC: 3 | RNVC: 2
10104441: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1485
Chute Center Section

011161485
209F355-102: RNCC: 1 | RNVC: 2
1211C6649: RNCC: 3 | RNVC: 2
0098-LL-TJ2-2981: RNCC: 5 | RNVC: 9

21 Jul 1981

1005-01-116-1501
Entrance Cover Assembly

011161501
209F550: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1505
Entrance Scoop Disc Assembly

011161505
209F595: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1510
Chute End Assembly

011161510
209F653-101: RNCC: 1 | RNVC: 2
1311C21073: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-5709
Valve Control Piston

011165709
MC15668: RNCC: 3 | RNVC: 2
MC15668: RNCC: 5 | RNVC: 9

29 Jul 1981

1005-01-117-9819
Link Shield

011179819
12524103: RNCC: 3 | RNVC: 2
1005.002210: RNCC: 5 | RNVC: 2
465-4103: RNCC: 5 | RNVC: 9
465-4103: RNCC: C | RNVC: 1

25 Aug 1981

1005-01-119-6038
End Bell Assembly

011196038
G497-CP852: RNCC: 3 | RNVC: 2

26 Sep 1981

1005-01-127-7356
Cable Assembly Connector

011277356
3733 038 000: RNCC: 3 | RNVC: 2

7 Mar 1982

1005-01-135-4765
Carrying Handle Grip

011354765
9348438: RNCC: 3 | RNVC: 2
3611710010: RNCC: 5 | RNVC: 2
22171: RNCC: 5 | RNVC: 2
3611710010: RNCC: 5 | RNVC: 2
10420713: RNCC: 6 | RNVC: 9

24 Jul 1982

1005-01-140-3280
Loading Chute Assembly

011403280
211F292: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-145-9279
Gun Elevation Slip Clutch Assembly

011459279
12292923: RNCC: 3 | RNVC: 2

21 Jan 1983

1005-01-147-2617
Case Sensor Arm

011472617
132D1969: RNCC: 3 | RNVC: 2

14 Feb 1983

1005-01-147-2620
Loading Hole Plug

011472620
116C2771-3: RNCC: 3 | RNVC: 2

14 Feb 1983

1005-01-157-6471
Finishing Tap

011576471
4693-6: RNCC: 3 | RNVC: 2

10 Jul 1983

1005-01-165-0513
Block Cylinder

011650513
367266: RNCC: 3 | RNVC: 2
C901060Q: RNCC: 5 | RNVC: 2
367266: RNCC: 5 | RNVC: 2

25 Oct 1983

1005-01-167-1174
Chute Feed

011671174
508130-02: RNCC: 3 | RNVC: 2
508130-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1260
Slipper Block

011671260
502558-01: RNCC: 3 | RNVC: 9
502558-01: RNCC: 5 | RNVC: 2
502558-01: RNCC: 5 | RNVC: 2
502558--01: RNCC: 5 | RNVC: 2
502558-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1291
Link Eject Chute Ap

011671291
508225-01: RNCC: 3 | RNVC: 2
508225-01: RNCC: 3 | RNVC: 2
508225-01: RNCC: 5 | RNVC: 2
508225-01: RNCC: 5 | RNVC: 9
508225-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1297
Clamp

011671297
508269-01: RNCC: 3 | RNVC: 9
508269-01: RNCC: 5 | RNVC: 2
508269-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1293
Hard Chute Assembly

011671293
7567218-011: RNCC: 3 | RNVC: 2
7567218-011: RNCC: 3 | RNVC: 2
7567218-011: RNCC: 5 | RNVC: 2
311339: RNCC: 5 | RNVC: 2
508096-01: RNCC: 5 | RNVC: 9
508096-01: RNCC: 5 | RNVC: 9
7567218-011: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-171-4778
Cartridge Case Deflector Assembly

011714778
9378328: RNCC: 3 | RNVC: 2

8 Feb 1984

1005-01-172-2995
Cover Retainer

011722995
12316779: RNCC: 3 | RNVC: 2

18 Feb 1984

1005-01-170-8354
Spring Guide

011708354
571430: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-172-1033
Weighed Lever

011721033
82A5027A6615: RNCC: 3 | RNVC: 2

15 Feb 1984

1005-01-182-0847
Bearing Retainer

011820847
7-317221460: RNCC: 3 | RNVC: 2
7-317221460: RNCC: 5 | RNVC: 2
7-317221460: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-1038
Right Hand Aft Elbow Chute

011821038
7-317236435: RNCC: 3 | RNVC: 2
7-317236435: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-107-5644
Seat Platform

011075644
12295198: RNCC: 3 | RNVC: 2

8 Feb 1981

1005-01-111-7787
Gun Mount Guard

011117787
12294484: RNCC: 3 | RNVC: 2

23 Apr 1981

1005-01-165-0523
Seal Hatch

011650523
502103-01: RNCC: 3 | RNVC: 2
502103-01: RNCC: 5 | RNVC: 2
502103-01: RNCC: 5 | RNVC: 2

25 Oct 1983

1005-01-182-7477
Piston Rod

011827477
387-3910: RNCC: 3 | RNVC: 2
387-3910: RNCC: 5 | RNVC: 9
387-3910: RNCC: 5 | RNVC: 9
387-3910: RNCC: 7 | RNVC: 1

27 Jun 1984

1005-01-037-1751
Elevating And Firing Cradle Support

010371751
167C1802: RNCC: 3 | RNVC: 2

14 Mar 1977

1005-01-038-8888
Breech Bolt Body

010388888
205F307: RNCC: 3 | RNVC: 2
205F307: RNCC: 5 | RNVC: 2
205F307: RNCC: 5 | RNVC: 2
205F307: RNCC: 5 | RNVC: 2

14 Apr 1977

1005-01-042-4682
Conveyor Element Support

010424682
167C1679: RNCC: 3 | RNVC: 2

10 Jun 1977

1005-01-051-1722
Small Arms Cartridge Follower

010511722
16949: RNCC: 3 | RNVC: 2
16949: RNCC: 5 | RNVC: 9

25 Nov 1977

1005-01-059-5052
Chute End Assembly

010595052
201F946-100: RNCC: 1 | RNVC: 2
1311C18539: RNCC: 3 | RNVC: 2
1005PL0698274: RNCC: 6 | RNVC: 9
1005PL1733129: RNCC: 6 | RNVC: 9
201F946: RNCC: D | RNVC: 9

12 Apr 1978

1005-01-059-5055
Chute End Assembly

010595055
201F974-100: RNCC: 1 | RNVC: 2
1311C19804: RNCC: 3 | RNVC: 2
1005PL1733152: RNCC: 6 | RNVC: 9

12 Apr 1978

1005-01-061-7577
Firing Cam

010617577
205F463: RNCC: 3 | RNVC: 2
205F463: RNCC: 5 | RNVC: 9
205F463: RNCC: 5 | RNVC: 9

29 Jun 1978

1005-01-081-5624
Recoil Mechanism Buffer

010815624
9327058: RNCC: 3 | RNVC: 2

16 Aug 1979

1005-01-088-4386
Sprocket Retainer

010884386
12524392: RNCC: 3 | RNVC: 2
1005.002247: RNCC: 5 | RNVC: 2
12524392: RNCC: 5 | RNVC: 2
2 0040-104: RNCC: 5 | RNVC: 2
465-4392: RNCC: 5 | RNVC: 2
2 0040-104: RNCC: 5 | RNVC: 9
465-4392: RNCC: 5 | RNVC: 9
10075692: RNCC: 6 | RNVC: 9
1005PL1276589: RNCC: 6 | RNVC: 9
465-4392: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4385
Roller Chain Track

010884385
12524390: RNCC: 3 | RNVC: 2

13 Jan 1980

1005-01-088-4402
Bushing-Bracket Assembly

010884402
12524280: RNCC: 3 | RNVC: 2
12524280: RNCC: 5 | RNVC: 2
10096576: RNCC: 6 | RNVC: 9

13 Jan 1980

1005-01-092-9523
Blank Firing Attachment Support

010929523
9327085: RNCC: 3 | RNVC: 2

6 Apr 1980

1005-01-098-6915
Sight Ring Retainer

010986915
12296822: RNCC: 3 | RNVC: 2

7 Aug 1980

1005-01-112-1631
Weapon Control Panel

011121631
12292073: RNCC: 3 | RNVC: 2

28 Apr 1981

1005-01-098-8126
Shaft Coupling

010988126
MC13573: RNCC: 3 | RNVC: 2
MC13573: RNCC: 5 | RNVC: 9

7 Aug 1980

1005-01-114-0052
Knob Assembly

011140052
12293312-1: RNCC: 3 | RNVC: 2
12293312-1: RNCC: 5 | RNVC: 1
12293312-1: RNCC: 5 | RNVC: 9

7 Jun 1981

1005-01-114-3072
Turret Indicator Bracket

011143072
12297398: RNCC: 3 | RNVC: 2

16 Jun 1981

1005-01-116-1084
Drive Unit Pin

011161084
570045: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1466
Scoop Sprocket Cluster

011161466
167C2594: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1468
Chute Support Arm

011161468
167C2886: RNCC: 3 | RNVC: 2
167C2886: RNCC: 5 | RNVC: 9

21 Jul 1981

1005-01-116-1479
Element Chute

011161479
209F352-1: RNCC: 1 | RNVC: 2
0721C20055: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-3172
Blackout Frame

011163172
12307299: RNCC: 3 | RNVC: 2

24 Jul 1981

1005-01-119-6044
Brush

011196044
G497-AN852: RNCC: 3 | RNVC: 2

26 Sep 1981

1005-01-120-4791
Front Element Guide

011204791
209F493: RNCC: 3 | RNVC: 2
209F493: RNCC: 5 | RNVC: 2

19 Oct 1981

1005-01-120-5653
Component Armature

011205653
G497-BP369: RNCC: 3 | RNVC: 2

21 Oct 1981

1005-01-122-8625
Firing Contact Assembly

011228625
167C1600: RNCC: 3 | RNVC: 2
167C1600: RNCC: 5 | RNVC: 2

1 Dec 1981

1005-01-126-7814
Support Roller

011267814
12307591: RNCC: 3 | RNVC: 2

17 Feb 1982

1005-01-128-9843
Brush Spring Assembly

011289843
42459: RNCC: 3 | RNVC: 2

30 Mar 1982

1005-01-130-3379
Tripod Mount Leg Section

011303379
9348339: RNCC: 3 | RNVC: 2
3618810016: RNCC: 5 | RNVC: 2
3618810016: RNCC: 5 | RNVC: 2

21 Apr 1982

1005-01-131-1905
Rear Sight

011311905
9349999: RNCC: 3 | RNVC: 2
711531514000: RNCC: 6 | RNVC: 9

6 May 1982

1005-01-138-8130
Cam Plate

011388130
MC14669: RNCC: 3 | RNVC: 2
MC14669: RNCC: 5 | RNVC: 9

21 Sep 1982

1005-01-138-8131
Inner Sleeve

011388131
MC14670: RNCC: 3 | RNVC: 2
MC14670: RNCC: 5 | RNVC: 9
MC14670: RNCC: 5 | RNVC: 9

21 Sep 1982

1005-01-139-2254
Chute Center Section

011392254
209F653-102: RNCC: 1 | RNVC: 2
1211C21072: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-139-2366
Tie Center Section

011392366
209F653-107: RNCC: 1 | RNVC: 2
1211C21506: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-140-3267
Timing Pin Lock

011403267
196B7774: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-139-2365
Cartridge Guide

011392365
132D1967: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-142-8829
Chute Center Section

011428829
209F653-103: RNCC: 1 | RNVC: 2
1211C20913: RNCC: 3 | RNVC: 2

22 Nov 1982

1005-01-147-1060
Front Feeder Housing

011471060
209F242: RNCC: 3 | RNVC: 2

10 Feb 1983

1005-01-141-3826
Wrench

011413826
9350031: RNCC: 3 | RNVC: 2
OREA241: RNCC: 5 | RNVC: 2
896B-10X11: RNCC: 5 | RNVC: 2
711531505408: RNCC: 5 | RNVC: 9
896-10X11: RNCC: 5 | RNVC: 9

27 Oct 1982

1005-01-154-2747
Clearing Sector Bracket Assembly

011542747
142D6682: RNCC: 3 | RNVC: 2
10162741: RNCC: 6 | RNVC: 9
142D5664: RNCC: E | RNVC: 8

23 May 1983

1005-01-167-1208
Post Assembly

011671208
10505643: RNCC: 3 | RNVC: 2

22 Nov 1983

1005-01-165-0512
Piston Control

011650512
362560: RNCC: 3 | RNVC: 2

25 Oct 1983

1005-01-167-8311
Sear Catch Assembly

011678311
12524070: RNCC: 3 | RNVC: 2
2 0040-045: RNCC: 5 | RNVC: 2
465-4070: RNCC: 5 | RNVC: 2
12524070: RNCC: 5 | RNVC: 2
2 0040-045: RNCC: 5 | RNVC: 9
465-4070: RNCC: 5 | RNVC: 9
10055750: RNCC: 6 | RNVC: 9
1005PL1276096: RNCC: 6 | RNVC: 9

7 Dec 1983

1005-01-167-1167
Spring Die

011671167
MHC36L: RNCC: 3 | RNVC: 2
MHC-36: RNCC: 5 | RNVC: 9
508263-01: RNCC: 7 | RNVC: 2

22 Nov 1983

1005-01-036-8196
Ammunition Chute Link

010368196
1210B14616-2: RNCC: 3 | RNVC: 2

7 Mar 1977

1005-01-038-6025
Spare Barrel Case

010386025
11826275: RNCC: 3 | RNVC: 2
3602012507: RNCC: 5 | RNVC: 2

9 Apr 1977

1005-01-053-8618
Hoisting Link Unit

010538618
196B7449: RNCC: 3 | RNVC: 2
1005PL0695650: RNCC: 6 | RNVC: 9

11 Jan 1978

1005-01-055-3372
Mounting Support

010553372
201F897: RNCC: 3 | RNVC: 2
1005PL0697195: RNCC: 6 | RNVC: 9

4 Feb 1978

1005-01-055-9408
Drum Drive Flexible Shaft

010559408
105D3947: RNCC: 1 | RNVC: 2
8698-100: RNCC: 3 | RNVC: 2
18566-601: RNCC: 5 | RNVC: 9
1005PL0698018: RNCC: 6 | RNVC: 9
16VS002009-1: RNCC: C | RNVC: 1

14 Feb 1978

1005-01-059-5053
Chute End Assembly

010595053
201F946-101: RNCC: 1 | RNVC: 2
1311C18549: RNCC: 3 | RNVC: 2
1005PL1733137: RNCC: 6 | RNVC: 9
1005PL0698298: RNCC: 6 | RNVC: 9

12 Apr 1978

1005-01-076-4149
Ma Support Assembly

010764149
12266475: RNCC: 3 | RNVC: 2

6 May 1979

1005-01-099-1748
Cable Assembly

010991748
12307334: RNCC: 3 | RNVC: 2

14 Aug 1980

1005-01-107-9162
Choke

011079162
12292792: RNCC: 1 | RNVC: 2
C104438: RNCC: 3 | RNVC: 2
12292792: RNCC: 5 | RNVC: 9
C104438: RNCC: 5 | RNVC: 9

15 Feb 1981

1005-01-109-1557
Elevation Assembly Camshaft

011091557
12292340: RNCC: 3 | RNVC: 2

11 Mar 1981

1005-01-111-4008
Fan Guard

011114008
12297596: RNCC: 3 | RNVC: 2

16 Apr 1981

1005-01-111-4007
Heater Retainer Plate

011114007
12294978: RNCC: 3 | RNVC: 2

16 Apr 1981

1005-01-111-5726
Manual Interlock Support

011115726
12292417: RNCC: 3 | RNVC: 2

19 Apr 1981

1005-01-112-1626
Journal Shield

011121626
12308400: RNCC: 3 | RNVC: 2
12295653: RNCC: 5 | RNVC: 9

28 Apr 1981

1005-01-112-3949
Motor Support

011123949
12292439: RNCC: 3 | RNVC: 2

3 May 1981

1005-01-112-8556
Traverse Camshaft Assembly

011128556
12292565: RNCC: 3 | RNVC: 2

11 May 1981

1005-01-113-7873
Indicator Bracket

011137873
12295005: RNCC: 3 | RNVC: 2

4 Jun 1981

1005-01-116-1476
Element Chute Retainer

011161476
188F986: RNCC: 3 | RNVC: 2
10162746: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1496
Rear Element Guide

011161496
209F494: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1508
Rear Fixed Scoop

011161508
209F605: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1509
Chute End Assembly

011161509
209F653-100: RNCC: 1 | RNVC: 2
1311C21075: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1550
Ammunition Chute

011161550
209F355-1: RNCC: 1 | RNVC: 2
0621D20057: RNCC: 3 | RNVC: 2
10104442: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-1553
Loader-Rammer Lever

011161553
142D5634: RNCC: 3 | RNVC: 2
10104445: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-116-3274
Toggle Switch Assembly

011163274
12295096: RNCC: 3 | RNVC: 2

25 Jul 1981

1005-01-118-8602
Boot Connector

011188602
12295744-2: RNCC: 1 | RNVC: 2
202D921-4-0: RNCC: 3 | RNVC: 2
202D921-4: RNCC: 5 | RNVC: 9
12295744: RNCC: 5 | RNVC: 9

13 Sep 1981

1005-01-119-6976
Aircraft Machine Gun Shaft-Bearing Assembly

011196976
MC15720: RNCC: 3 | RNVC: 2
MC15720: RNCC: 5 | RNVC: 9

30 Sep 1981

1005-01-120-4776
Front Cartridge Guide

011204776
209F492: RNCC: 3 | RNVC: 2

19 Oct 1981

1005-01-123-6070
Actuator Pivot

011236070
2528367: RNCC: 3 | RNVC: 2

16 Dec 1981

1005-01-126-7832
Latch Plate

011267832
12307449: RNCC: 3 | RNVC: 2

17 Feb 1982

1005-01-130-1155
Actuating Dog

011301155
2530796: RNCC: 3 | RNVC: 2

16 Apr 1982

1005-01-128-5497
Magazine Cover

011285497
9348232: RNCC: 3 | RNVC: 2
361271001 ISS 9: RNCC: 5 | RNVC: 1
3618900605-271: RNCC: 5 | RNVC: 1
22271: RNCC: 5 | RNVC: 1
3612710010: RNCC: 5 | RNVC: 2
711531509400: RNCC: 5 | RNVC: 9
10421340: RNCC: 6 | RNVC: 9

25 Mar 1982

1005-01-131-1902
Small Arms Gunnery Elevating Mechanism

011311902
9350011: RNCC: 3 | RNVC: 2
711531507602: RNCC: 5 | RNVC: 9

6 May 1982

1005-01-140-3275
Ammunition Drum Assembly Partition

011403275
209F277: RNCC: 3 | RNVC: 2
10104444: RNCC: 6 | RNVC: 9

11 Oct 1982

1005-01-142-8267
Forward Seal

011428267
11597016: RNCC: 3 | RNVC: 2
12000394: RNCC: 5 | RNVC: 2
12000394: RNCC: 5 | RNVC: 9
1005PL0960266: RNCC: 6 | RNVC: 9
12000394: RNCC: 7 | RNVC: 2

21 Nov 1982

1005-01-144-0039
Drive Unload Housing

011440039
209F253: RNCC: 3 | RNVC: 2

13 Dec 1982

1005-01-151-6234
Cartridge Clip Bag

011516234
5830085: RNCC: 3 | RNVC: 2
5830085: RNCC: 5 | RNVC: 9
5830085: RNCC: 5 | RNVC: 9

20 Apr 1983

1005-01-165-0524
Pad Hatch

011650524
502106-01: RNCC: 3 | RNVC: 2
502106-01: RNCC: 5 | RNVC: 2
502106-01: RNCC: 5 | RNVC: 9

25 Oct 1983

1005-01-158-4507
Rear Base Assembly

011584507
7269278: RNCC: 3 | RNVC: 2
1005011584507: RNCC: 6 | RNVC: 9

23 Jul 1983

1005-01-166-1947
Brush Block Assembl

011661947
65725: RNCC: 3 | RNVC: 2

9 Nov 1983

1005-01-166-9652
Helmet Hook

011669652
12308954: RNCC: 3 | RNVC: 2

20 Nov 1983

1005-01-167-1284
Door Assembly Ammo

011671284
508014-01: RNCC: 3 | RNVC: 2
508014-01: RNCC: 5 | RNVC: 2
508014: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1213
Adjuster Linkage

011671213
502452-01: RNCC: 3 | RNVC: 2
502452-01: RNCC: 5 | RNVC: 2
502452-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-170-2185
Chain Guide

011702185
12524085: RNCC: 3 | RNVC: 2
12524085: RNCC: 5 | RNVC: 2
2 0040-052: RNCC: 5 | RNVC: 2
2 0040-052: RNCC: 5 | RNVC: 9
465-4085: RNCC: 5 | RNVC: 9
10125919: RNCC: 6 | RNVC: 9
465-4085: RNCC: C | RNVC: 1

20 Jan 1984

1005-01-173-7409
Tube Cover

011737409
82A5027A5045: RNCC: 3 | RNVC: 2

8 Mar 1984

1005-01-176-2215
Machine Gun Cradle

011762215
12315808: RNCC: 3 | RNVC: 2

9 Apr 1984

1005-01-181-6021
Tensioner Track

011816021
7-317236412: RNCC: 3 | RNVC: 2
7-317236412: RNCC: 5 | RNVC: 2
7-317236412: RNCC: 5 | RNVC: 9

13 Jun 1984

1005-01-182-0855
Left Hand Aft Elbow Frame

011820855
7-317236306: RNCC: 3 | RNVC: 2
7-317236306: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-114-0083
Push Rod Extension

011140083
12524433: RNCC: 3 | RNVC: 2
12524462: RNCC: 5 | RNVC: 9

7 Jun 1981

1005-01-138-8127
Spring Ring

011388127
MC13599: RNCC: 3 | RNVC: 2
MC13599: RNCC: 5 | RNVC: 9

21 Sep 1982

1005-01-139-2364
Timing Lock Arm

011392364
132D1962: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-131-1903
Shouldered Shaft

011311903
9350018: RNCC: 3 | RNVC: 2
3000021021: RNCC: 5 | RNVC: 2
711531509301: RNCC: 5 | RNVC: 9

6 May 1982

1005-01-134-3621
Elevation Index

011343621
9349066: RNCC: 3 | RNVC: 2
1005011343621: RNCC: 5 | RNVC: 2
1005011343621: RNCC: 6 | RNVC: 9

3 Jul 1982

1005-01-167-1178
Pawl Release

011671178
508135-01: RNCC: 3 | RNVC: 9
508135-01: RNCC: 5 | RNVC: 1
508135-01: RNCC: 5 | RNVC: 2

22 Nov 1983

1005-01-053-8619
Aft Universal Joint

010538619
142D6272-2: RNCC: 1 | RNVC: 2
SM651S/627202: RNCC: 3 | RNVC: 2
20A-1356-B: RNCC: 3 | RNVC: 2
CE627202: RNCC: 5 | RNVC: 9
905D593-4: RNCC: 5 | RNVC: 9
32-916: RNCC: 5 | RNVC: 9
142D6272-2: RNCC: 5 | RNVC: 9
20A-891: RNCC: 5 | RNVC: 9
G3E627202: RNCC: 5 | RNVC: 9
1005PL0695711: RNCC: 6 | RNVC: 9

11 Jan 1978

1005-01-053-9256
Access Unit Frame Assembly

010539256
132D1809: RNCC: 3 | RNVC: 2
132D1120: RNCC: 5 | RNVC: 9

13 Jan 1978

1005-01-034-9493
Angle Assembly

010349493
204R341-62: RNCC: 3 | RNVC: 2

1 Feb 1977

1005-01-034-9497
Gun Recoil Mechanism Slider Assembly

010349497
167C1557: RNCC: 3 | RNVC: 2

1 Feb 1977

1005-01-044-6074
Forward Rotor

010446074
205F335: RNCC: 3 | RNVC: 2

17 Jul 1977

1005-01-054-9885
Spring Plate

010549885
MC8777: RNCC: 3 | RNVC: 2
MC8777: RNCC: 5 | RNVC: 9

30 Jan 1978

1005-01-055-6471
Front Element Guide

010556471
201F477: RNCC: 3 | RNVC: 2
1005PL0697349: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-055-6483
Shaft Flex Clamp

010556483
105D3883: RNCC: 3 | RNVC: 2
1005PL0697794: RNCC: 6 | RNVC: 9

9 Feb 1978

1005-01-056-3047
Entrance Cartridge Guide

010563047
105D3881: RNCC: 3 | RNVC: 2
105D3881: RNCC: 5 | RNVC: 2
1005PL0698176: RNCC: 6 | RNVC: 9

19 Feb 1978

1005-01-059-5057
D Ring Section

010595057
201F974-103: RNCC: 1 | RNVC: 2
1211C18774: RNCC: 3 | RNVC: 2
1005PL0698357: RNCC: 6 | RNVC: 9
1005PL1590451: RNCC: 6 | RNVC: 9

12 Apr 1978

1005-01-068-8045
Center Section

010688045
1211C6647: RNCC: 3 | RNVC: 2
201F974-102: RNCC: 5 | RNVC: 2
1005PL0698542: RNCC: 6 | RNVC: 9
201F974: RNCC: D | RNVC: 9

2 Dec 1978

1005-01-077-1651
Switch Adjustment Jig

010771651
12277474-1: RNCC: 3 | RNVC: 2
12277474-1: RNCC: 5 | RNVC: 2
12277474-1: RNCC: 5 | RNVC: 2
12277474: RNCC: D | RNVC: 9

19 May 1979

1005-01-079-8464
Release Shaft

010798464
A885AE584: RNCC: 3 | RNVC: 2

15 Jul 1979

1005-01-083-9297
Shoe Guide Plate

010839297
11686271: RNCC: 3 | RNVC: 2
1005010839297: RNCC: 6 | RNVC: 9

5 Oct 1979

1005-01-095-3500
Support Assy Clamp

010953500
9326860: RNCC: 3 | RNVC: 2

29 May 1980

1005-01-097-6465
Index Drive Assembly

010976465
12524242: RNCC: 3 | RNVC: 2
465-4242: RNCC: 5 | RNVC: 9
465-4242: RNCC: C | RNVC: 1

17 Jul 1980

1005-01-098-8329
Gas Restrictor Chamber

010988329
9326857: RNCC: 3 | RNVC: 2

8 Aug 1980

1005-01-107-2411
Diode Bracket

011072411
12294237: RNCC: 3 | RNVC: 2

1 Feb 1981

1005-01-109-6867
Gun Component Retainer

011096867
12294769: RNCC: 3 | RNVC: 2

19 Mar 1981

1005-01-112-3931
Current Sensor Assembly

011123931
12292192: RNCC: 3 | RNVC: 2
12292192: RNCC: 3 | RNVC: 2
155801: RNCC: 5 | RNVC: 9
12292192: RNCC: 5 | RNVC: 9

3 May 1981

1005-01-112-8553
Traverse Drive Guard

011128553
12292489: RNCC: 3 | RNVC: 2

11 May 1981

1005-01-114-0072
Elevation Camshaft Assembly

011140072
12292571: RNCC: 3 | RNVC: 2

7 Jun 1981

1005-01-114-0079
Sear Retractor Pivot

011140079
12524292: RNCC: 3 | RNVC: 2
465-4292: RNCC: 5 | RNVC: 9
465-4292: RNCC: C | RNVC: 1

7 Jun 1981

1005-01-114-0081
Barrel Support Assembly

011140081
12524350: RNCC: 3 | RNVC: 2
465-4350: RNCC: 5 | RNVC: 2
465-4350: RNCC: 5 | RNVC: 9

7 Jun 1981

1005-01-116-1487
Exit Reposition Cartridge Guide

011161487
209F357: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1489
Rear Transfer Housing Assembly

011161489
209F402: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1499
Scoop Cartridge Guide

011161499
209F546: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1514
Piston And Shoe Assembly

011161514
433710: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1506
Scoop Extension

011161506
209F596: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-118-3936
Floor Plate

011183936
12295220: RNCC: 3 | RNVC: 2

3 Sep 1981

1005-01-120-4790
Rear Cartridge Guide

011204790
209F491: RNCC: 3 | RNVC: 2

19 Oct 1981

1005-01-119-7866
Small Arms Cleaning Rod Section

011197866
12524481: RNCC: 3 | RNVC: 2
12524481: RNCC: 5 | RNVC: 2
2 0117-030: RNCC: 5 | RNVC: 9
465-4481: RNCC: 5 | RNVC: 9
1005PL1599933: RNCC: 6 | RNVC: 9
465-4481: RNCC: C | RNVC: 1

4 Oct 1981

1005-01-128-5483
Scope Adapter Plug

011285483
9348307: RNCC: 3 | RNVC: 2
3616790017: RNCC: 5 | RNVC: 2
22679: RNCC: 5 | RNVC: 2

25 Mar 1982

1005-01-128-9842
Thermostat

011289842
44340: RNCC: 3 | RNVC: 2

30 Mar 1982

1005-01-130-3376
Plug

011303376
9348336: RNCC: 3 | RNVC: 2
22874: RNCC: 5 | RNVC: 1
3618740016: RNCC: 5 | RNVC: 2
3618740016: RNCC: 5 | RNVC: 2
10421015: RNCC: 6 | RNVC: 9
711531512202: RNCC: 6 | RNVC: 9

21 Apr 1982

1005-01-130-3378
Tripod Mount Leg Section

011303378
9348340: RNCC: 3 | RNVC: 2
3618870017: RNCC: 5 | RNVC: 2

21 Apr 1982

1005-01-139-2256
Chute Ring Section

011392256
209F653-106: RNCC: 1 | RNVC: 2
1211C21505: RNCC: 3 | RNVC: 2

27 Sep 1982

1005-01-140-3264
Nose Sensor Arm

011403264
132D1970: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-140-3279
Gate Hook

011403279
211F171: RNCC: 3 | RNVC: 2

11 Oct 1982

1005-01-149-8296
Slotted Link

011498296
12316781: RNCC: 3 | RNVC: 2

27 Mar 1983

1005-01-158-2226
Accessory Case

011582226
9362860: RNCC: 3 | RNVC: 2

19 Jul 1983

1005-01-166-1943
Rotor Cover

011661943
65713: RNCC: 3 | RNVC: 2
65713: RNCC: 5 | RNVC: 9
101569: RNCC: 5 | RNVC: 9

9 Nov 1983

1005-01-167-1162
Barrel Release Asse

011671162
502281-01: RNCC: 3 | RNVC: 2
502281-01: RNCC: 3 | RNVC: 9
502281-01: RNCC: 5 | RNVC: 2
502281-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1217
Commanders Arm Assembly

011671217
502476-01: RNCC: 3 | RNVC: 2
502476-01: RNCC: 5 | RNVC: 2
502476-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-167-1257
Seat Back Support

011671257
502236-01: RNCC: 3 | RNVC: 2
971005001: RNCC: 5 | RNVC: 9
502236-01: RNCC: 5 | RNVC: 9

22 Nov 1983

1005-01-170-5458
Bolt Carrier

011705458
82A5027A5139: RNCC: 3 | RNVC: 2

26 Jan 1984

1005-01-170-8349
Manual Plunger

011708349
570198: RNCC: 3 | RNVC: 2

29 Jan 1984

1005-01-174-2176
Sear

011742176
82A5027A5127: RNCC: 3 | RNVC: 2

15 Mar 1984

1005-01-174-3346
Spotting Rifle Insert

011743346
82A5027A5046: RNCC: 3 | RNVC: 2

16 Mar 1984

1005-01-182-1007
Left-Hand Aft Elbow Track

011821007
7-317236308: RNCC: 3 | RNVC: 2
7-317236308: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-0854
Lefthand Aft Elbow Support

011820854
7-217236307: RNCC: 3 | RNVC: 2
7-217236307: RNCC: 5 | RNVC: 9

19 Jun 1984

1005-01-182-7942
Ammunition Drum Assembly Partition

011827942
014737-1: RNCC: 3 | RNVC: 2
014737-1: RNCC: 3 | RNVC: 9

27 Jun 1984

1005-01-116-1488
Transfer Housing Assembly

011161488
209F379: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1465
Transfer Sprocketshaft

011161465
167C2357: RNCC: 3 | RNVC: 2

21 Jul 1981

1005-01-116-1473
Cable Block

011161473
176C1397: RNCC: 3 | RNVC: 2
10162740: RNCC: 6 | RNVC: 9

21 Jul 1981

1005-01-034-9494
Angle Assembly

010349494
204R341-63: RNCC: 3 | RNVC: 2

1 Feb 1977

1005-01-037-1747
Anti-Rotating Slide

010371747
167C1767: RNCC: 3 | RNVC: 2

14 Mar 1977

1005-01-037-1755
Rotating Knife

010371755
132D1340: RNCC: 3 | RNVC: 2
132D1340: RNCC: 5 | RNVC: 2
132D1340: RNCC: 5 | RNVC: 2

14 Mar 1977

1005-01-041-9263
Breech Assembly Spring

010419263
11691419: RNCC: 3 | RNVC: 2
1005010419263: RNCC: 6 | RNVC: 9
1005PL0959932: RNCC: 6 | RNVC: 9

4 Jun 1977

1005-01-053-4216
Switch And Connector Assembly

010534216
196B7452: RNCC: 3 | RNVC: 2
1005PL0695623: RNCC: 6 | RNVC: 9

5 Jan 1978

1005-01-055-9902
Ammunition Chute

010559902
201F946-2: RNCC: 1 | RNVC: 2
0621D18555: RNCC: 3 | RNVC: 2
1005PL1738038: RNCC: 6 | RNVC: 9
1005PL0698165: RNCC: 6 | RNVC: 9
201F946: RNCC: D | RNVC: 9

15 Feb 1978

1005-01-059-0500
Round Base Guide

010590500
142D5070: RNCC: 3 | RNVC: 2

6 Apr 1978

1005-01-059-5051
Casing Assembly

010595051
105D3947-2: RNCC: 1 | RNVC: 2
8698-300: RNCC: 3 | RNVC: 2
18567-901: RNCC: 5 | RNVC: 9
1005PL0698180: RNCC: 6 | RNVC: 9
1005PL1590384: RNCC: 6 | RNVC: 9

12 Apr 1978

1005-01-088-4378
Cam-Pin Assembly

010884378
12524335: RNCC: 3 | RNVC: 2
465-4335: RNCC: 5 | RNVC: 9
465-4335: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4401
Bushing-Cam Assembly

010884401
12524275: RNCC: 3 | RNVC: 2
12524275: RNCC: 5 | RNVC: 2
2 0040-083: RNCC: 5 | RNVC: 9
465-4275: RNCC: 5 | RNVC: 9
10096575: RNCC: 6 | RNVC: 9
1005PL1276556: RNCC: 6 | RNVC: 9
465-4275: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-088-4406
Track Hook Latch

010884406
12524308: RNCC: 3 | RNVC: 2
465-4308: RNCC: 5 | RNVC: 9
465-4308: RNCC: C | RNVC: 1

13 Jan 1980

1005-01-111-5724
Potentiometer Housing

011115724
12292403: RNCC: 3 | RNVC: 2

19 Apr 1981

1005-01-112-6270
Rotor Spindle

011126270
12292029: RNCC: 3 | RNVC: 2

7 May 1981

1005-01-113-0321
Small Arms Cleaning Rod Section

011130321
8436776: RNCC: 3 | RNVC: 2
SP67204: RNCC: 5 | RNVC: 2
711531503610: RNCC: 6 | RNVC: 9

15 May 1981

1005-01-112-6296
Bus Bar Bracket

011126296
12307319: RNCC: 3 | RNVC: 2
12276815: RNCC: 5 | RNVC: 9

7 May 1981

1005-01-113-3766
Ammunition Box Support

011133766
12295200: RNCC: 3 | RNVC: 2

21 May 1981

Load More Results