1005-01-X90-4640

5365-00-807-9245 5365008079245 008079245 is a straight nonfluid fitting with wrenching facilities on one end and external threads, other than pipe or hose series, on the other end. it has an unthreaded through hole in its axis which may be countersunk and/or counterbored on one or both ends. it is designed to accommodate a shaft, or the like, or used to reinforce a hole in a bulkhead, or the like. for similar items specifically designed for use in a stuffing box, see packing nut. for nonfluid items with an internal thread, see insert, screw thread&#59; or adapter bushing. excludes reducer, boss&#59; and items designed to accommodate a tube or tube fitting.

4730-01-291-5768 4730012915768 012915768 is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a bolt, fluid passage(s).

5355-99-716-9636 5355997169636 997169636 is an item designed to transmit manual, rotary or linear motion to other devices. may include detachable or nondetachable stud (shaft), pointer, or skirt. it may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. for items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. for items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. excludes doorknob; and handle (as modified).

5310-14-528-5732 5310145285732 145285732 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1005-01-X90-5702 100501X905702 01X905702