1005-01-X90-3155

| RNVC: 2 | DAC: 2 15 Mar 1975 6615-00-631-1697 https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-3155
100501X903155 01X903155 1005-01-X90-3155 100501X903155 01X903155 https//www.nsnlookup.com /cage

5985-01-380-5028 5985013805028 013805028 is an item consisting of two or more separately excited antennas on a common mounting or mounted on each other. do not use for a single antenna which is merely complex or unusual in construction.

1560-01-411-6848 1560014116848 014116848 is a device of various shapes to be permanently attached to the structure of an aircraft. it is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. it may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. excludes items which are primarily designed for dampening shock and/or vibration. excludes bracket, angle; bracket, double angle; bracket, shelf; bracket, mounting; bracket (1), structural component, aircraft; and radius block.

1560-01-411-6842 1560014116842 014116842 is a device of various shapes to be permanently attached to the structure of an aircraft. it is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. it may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. excludes items which are primarily designed for dampening shock and/or vibration. excludes bracket, angle; bracket, double angle; bracket, shelf; bracket, mounting; bracket (1), structural component, aircraft; and radius block.

5999-01-670-0552 5999016700552 016700552 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.