1005-01-X90-2821

Documents 2815-33-202-2195 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2821
100501X902821 01X902821 1005-01-X90-2821 100501X902821 01X902821 https//www.nsnlookup.com /fsg-

5310-01-226-8314 5310012268314 012268314 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-01-130-1652 5310011301652 011301652 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6250-00-812-4817 6250008124817 008124817 is an electric fitting primarily designed to electrically and mechanically accommodate a lamp. it may include an integral switch, transformer, or dropping resistor, provided these items control the lamp only. it does not include a shade, lens, reflector, or other item for modifying illumination. for items designed to mount on a conduit outlet, or junction box; see fixture, lighting.

4730-25-125-4912 4730251254912 251254912 is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. it may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. it may include nuts, sleeves, and/or grommets.