1005-01-X90-2754

| RNVC: 2 | DAC: 2 18 Jul 1977 7025-01-177-4125 https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2754
100501X902754 01X902754 1005-01-X90-2754 100501X902754 01X902754 Restrictions 7025-01-177-4125

1560-00-806-6663 1560008066663 008066663 FITTING ASSEMBLY

6605-99-529-9131 6605995299131 995299131 ACCELEROMETER ASSEM

5315-14-471-2138 5315144712138 144712138 is a half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. its ends are separable or one end is bent to hold it in place.

5310-14-471-2136 5310144712136 144712136 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.