1005-01-X90-2543

Documents 6150-14-540-7044 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2543
100501X902543 01X902543 1005-01-X90-2543 100501X902543 01X902543 https//www.nsnlookup.com /fsg-

Documents 3020-01-383-5250 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2543
100501X902543 01X902543 1005-01-X90-2543 100501X902543 01X902543 https//www.nsnlookup.com /cage

5995-99-895-2236 5995998952236 998952236 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

5310-12-144-9627 5310121449627 121449627 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-12-161-0145 5310121610145 121610145 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.