1005-01-X90-2283

5315-01-470-8584 5315014708584 014708584 is a cone-shaped headless item, having a threaded portion at either end. it is used for aligning, fastening, and the like by fitting into a corresponding taper reamed hole.

5815-00-543-1828 5815005431828 005431828 is the components and items required to operate an electronic and/or mechanical teletypewriter system for transmitting, receiving and recording of telegraphic messages by wire. it may include operating spares or the following operating components or items; perforator-transmitter, reperforator set, distributor-transmitter. for teletypewriter system utilizing electromagnetic waves in space, see radio teletypewriter set.

2540-33-204-6868 2540332046868 332046868 is a u-shaped item designed to support the tarpaulin over a vehicle body.

5999-14-433-6365 5999144336365 144336365 is an item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. it isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. it includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. it may also afford protection from shock or vibration. it may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. for items whose function is electrical insulation only, see insulator, (as modified). excludes holder, (as modified); retainer, (as modified), and spacer, plate.

4910-01-656-4107 4910016564107 016564107 is a rigid item which is less than three times as long as it is high. it includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. may include mounting hardware such as bolts, screw, washers and the like. excludes spreader, sling. see also beam, hoisting. do not use if a more specific name applies, such as ring, connecting, round and link, chain, end.