1005-01-X90-2164

| RNVC: 9 | DAC: 4 2 May 1989 6210-01-393-6479 https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2164
100501X902164 01X902164 1005-01-X90-2164 100501X902164 01X902164 https//www.nsnlookup.com /fsg-

Documents 2815-15-132-1191 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2164
100501X902164 01X902164 1005-01-X90-2164 100501X902164 01X902164 https//www.nsnlookup.com /fsg-

6655-21-867-4372 6655-00-903-8702 6655-37-522- https//www.nsnlookup.com /fsg-10/fsc-1005/us 1005-01-X90-2164
100501X902164 01X902164 valve, graphite impregnated and lubricated items. https//www.nsnlookup.com

4130-15-126-6777 4130151266777 151266777 FILTRO ARIA 227X304

5310-12-135-2469 5310121352469 121352469 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.